| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Willsemi WUSB3801 Type-C port controller driver |
| * |
| * Copyright (C) 2022 Samuel Holland <samuel@sholland.org> |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb/typec.h> |
| |
| #define WUSB3801_REG_DEVICE_ID 0x01 |
| #define WUSB3801_REG_CTRL0 0x02 |
| #define WUSB3801_REG_INT 0x03 |
| #define WUSB3801_REG_STAT 0x04 |
| #define WUSB3801_REG_CTRL1 0x05 |
| #define WUSB3801_REG_TEST00 0x06 |
| #define WUSB3801_REG_TEST01 0x07 |
| #define WUSB3801_REG_TEST02 0x08 |
| #define WUSB3801_REG_TEST03 0x09 |
| #define WUSB3801_REG_TEST04 0x0a |
| #define WUSB3801_REG_TEST05 0x0b |
| #define WUSB3801_REG_TEST06 0x0c |
| #define WUSB3801_REG_TEST07 0x0d |
| #define WUSB3801_REG_TEST08 0x0e |
| #define WUSB3801_REG_TEST09 0x0f |
| #define WUSB3801_REG_TEST0A 0x10 |
| #define WUSB3801_REG_TEST0B 0x11 |
| #define WUSB3801_REG_TEST0C 0x12 |
| #define WUSB3801_REG_TEST0D 0x13 |
| #define WUSB3801_REG_TEST0E 0x14 |
| #define WUSB3801_REG_TEST0F 0x15 |
| #define WUSB3801_REG_TEST10 0x16 |
| #define WUSB3801_REG_TEST11 0x17 |
| #define WUSB3801_REG_TEST12 0x18 |
| |
| #define WUSB3801_DEVICE_ID_VERSION_ID GENMASK(7, 3) |
| #define WUSB3801_DEVICE_ID_VENDOR_ID GENMASK(2, 0) |
| |
| #define WUSB3801_CTRL0_DIS_ACC_SUPPORT BIT(7) |
| #define WUSB3801_CTRL0_TRY GENMASK(6, 5) |
| #define WUSB3801_CTRL0_TRY_NONE (0x0 << 5) |
| #define WUSB3801_CTRL0_TRY_SNK (0x1 << 5) |
| #define WUSB3801_CTRL0_TRY_SRC (0x2 << 5) |
| #define WUSB3801_CTRL0_CURRENT GENMASK(4, 3) /* SRC */ |
| #define WUSB3801_CTRL0_CURRENT_DEFAULT (0x0 << 3) |
| #define WUSB3801_CTRL0_CURRENT_1_5A (0x1 << 3) |
| #define WUSB3801_CTRL0_CURRENT_3_0A (0x2 << 3) |
| #define WUSB3801_CTRL0_ROLE GENMASK(2, 1) |
| #define WUSB3801_CTRL0_ROLE_SNK (0x0 << 1) |
| #define WUSB3801_CTRL0_ROLE_SRC (0x1 << 1) |
| #define WUSB3801_CTRL0_ROLE_DRP (0x2 << 1) |
| #define WUSB3801_CTRL0_INT_MASK BIT(0) |
| |
| #define WUSB3801_INT_ATTACHED BIT(0) |
| #define WUSB3801_INT_DETACHED BIT(1) |
| |
| #define WUSB3801_STAT_VBUS_DETECTED BIT(7) |
| #define WUSB3801_STAT_CURRENT GENMASK(6, 5) /* SNK */ |
| #define WUSB3801_STAT_CURRENT_STANDBY (0x0 << 5) |
| #define WUSB3801_STAT_CURRENT_DEFAULT (0x1 << 5) |
| #define WUSB3801_STAT_CURRENT_1_5A (0x2 << 5) |
| #define WUSB3801_STAT_CURRENT_3_0A (0x3 << 5) |
| #define WUSB3801_STAT_PARTNER GENMASK(4, 2) |
| #define WUSB3801_STAT_PARTNER_STANDBY (0x0 << 2) |
| #define WUSB3801_STAT_PARTNER_SNK (0x1 << 2) |
| #define WUSB3801_STAT_PARTNER_SRC (0x2 << 2) |
| #define WUSB3801_STAT_PARTNER_AUDIO (0x3 << 2) |
| #define WUSB3801_STAT_PARTNER_DEBUG (0x4 << 2) |
| #define WUSB3801_STAT_ORIENTATION GENMASK(1, 0) |
| #define WUSB3801_STAT_ORIENTATION_NONE (0x0 << 0) |
| #define WUSB3801_STAT_ORIENTATION_CC1 (0x1 << 0) |
| #define WUSB3801_STAT_ORIENTATION_CC2 (0x2 << 0) |
| #define WUSB3801_STAT_ORIENTATION_BOTH (0x3 << 0) |
| |
| #define WUSB3801_CTRL1_SM_RESET BIT(0) |
| |
| #define WUSB3801_TEST01_VENDOR_SUB_ID (BIT(8) | BIT(6)) |
| |
| #define WUSB3801_TEST02_FORCE_ERR_RCY BIT(8) |
| |
| #define WUSB3801_TEST0A_WAIT_VBUS BIT(5) |
| |
| struct wusb3801 { |
| struct typec_capability cap; |
| struct device *dev; |
| struct typec_partner *partner; |
| struct typec_port *port; |
| struct regmap *regmap; |
| struct regulator *vbus_supply; |
| unsigned int partner_type; |
| enum typec_port_type port_type; |
| enum typec_pwr_opmode pwr_opmode; |
| bool vbus_on; |
| }; |
| |
| static enum typec_role wusb3801_get_default_role(struct wusb3801 *wusb3801) |
| { |
| switch (wusb3801->port_type) { |
| case TYPEC_PORT_SRC: |
| return TYPEC_SOURCE; |
| case TYPEC_PORT_SNK: |
| return TYPEC_SINK; |
| case TYPEC_PORT_DRP: |
| default: |
| if (wusb3801->cap.prefer_role == TYPEC_SOURCE) |
| return TYPEC_SOURCE; |
| return TYPEC_SINK; |
| } |
| } |
| |
| static int wusb3801_map_port_type(enum typec_port_type type) |
| { |
| switch (type) { |
| case TYPEC_PORT_SRC: |
| return WUSB3801_CTRL0_ROLE_SRC; |
| case TYPEC_PORT_SNK: |
| return WUSB3801_CTRL0_ROLE_SNK; |
| case TYPEC_PORT_DRP: |
| default: |
| return WUSB3801_CTRL0_ROLE_DRP; |
| } |
| } |
| |
| static int wusb3801_map_pwr_opmode(enum typec_pwr_opmode mode) |
| { |
| switch (mode) { |
| case TYPEC_PWR_MODE_USB: |
| default: |
| return WUSB3801_CTRL0_CURRENT_DEFAULT; |
| case TYPEC_PWR_MODE_1_5A: |
| return WUSB3801_CTRL0_CURRENT_1_5A; |
| case TYPEC_PWR_MODE_3_0A: |
| return WUSB3801_CTRL0_CURRENT_3_0A; |
| } |
| } |
| |
| static unsigned int wusb3801_map_try_role(int role) |
| { |
| switch (role) { |
| case TYPEC_NO_PREFERRED_ROLE: |
| default: |
| return WUSB3801_CTRL0_TRY_NONE; |
| case TYPEC_SINK: |
| return WUSB3801_CTRL0_TRY_SNK; |
| case TYPEC_SOURCE: |
| return WUSB3801_CTRL0_TRY_SRC; |
| } |
| } |
| |
| static enum typec_orientation wusb3801_unmap_orientation(unsigned int status) |
| { |
| switch (status & WUSB3801_STAT_ORIENTATION) { |
| case WUSB3801_STAT_ORIENTATION_NONE: |
| case WUSB3801_STAT_ORIENTATION_BOTH: |
| default: |
| return TYPEC_ORIENTATION_NONE; |
| case WUSB3801_STAT_ORIENTATION_CC1: |
| return TYPEC_ORIENTATION_NORMAL; |
| case WUSB3801_STAT_ORIENTATION_CC2: |
| return TYPEC_ORIENTATION_REVERSE; |
| } |
| } |
| |
| static enum typec_pwr_opmode wusb3801_unmap_pwr_opmode(unsigned int status) |
| { |
| switch (status & WUSB3801_STAT_CURRENT) { |
| case WUSB3801_STAT_CURRENT_STANDBY: |
| case WUSB3801_STAT_CURRENT_DEFAULT: |
| default: |
| return TYPEC_PWR_MODE_USB; |
| case WUSB3801_STAT_CURRENT_1_5A: |
| return TYPEC_PWR_MODE_1_5A; |
| case WUSB3801_STAT_CURRENT_3_0A: |
| return TYPEC_PWR_MODE_3_0A; |
| } |
| } |
| |
| static int wusb3801_try_role(struct typec_port *port, int role) |
| { |
| struct wusb3801 *wusb3801 = typec_get_drvdata(port); |
| |
| return regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0, |
| WUSB3801_CTRL0_TRY, |
| wusb3801_map_try_role(role)); |
| } |
| |
| static int wusb3801_port_type_set(struct typec_port *port, |
| enum typec_port_type type) |
| { |
| struct wusb3801 *wusb3801 = typec_get_drvdata(port); |
| int ret; |
| |
| ret = regmap_update_bits(wusb3801->regmap, WUSB3801_REG_CTRL0, |
| WUSB3801_CTRL0_ROLE, |
| wusb3801_map_port_type(type)); |
| if (ret) |
| return ret; |
| |
| wusb3801->port_type = type; |
| |
| return 0; |
| } |
| |
| static const struct typec_operations wusb3801_typec_ops = { |
| .try_role = wusb3801_try_role, |
| .port_type_set = wusb3801_port_type_set, |
| }; |
| |
| static int wusb3801_hw_init(struct wusb3801 *wusb3801) |
| { |
| return regmap_write(wusb3801->regmap, WUSB3801_REG_CTRL0, |
| wusb3801_map_try_role(wusb3801->cap.prefer_role) | |
| wusb3801_map_pwr_opmode(wusb3801->pwr_opmode) | |
| wusb3801_map_port_type(wusb3801->port_type)); |
| } |
| |
| static void wusb3801_hw_update(struct wusb3801 *wusb3801) |
| { |
| struct typec_port *port = wusb3801->port; |
| struct device *dev = wusb3801->dev; |
| unsigned int partner_type, status; |
| int ret; |
| |
| ret = regmap_read(wusb3801->regmap, WUSB3801_REG_STAT, &status); |
| if (ret) { |
| dev_warn(dev, "Failed to read port status: %d\n", ret); |
| status = 0; |
| } |
| dev_dbg(dev, "status = 0x%02x\n", status); |
| |
| partner_type = status & WUSB3801_STAT_PARTNER; |
| |
| if (partner_type == WUSB3801_STAT_PARTNER_SNK) { |
| if (!wusb3801->vbus_on) { |
| ret = regulator_enable(wusb3801->vbus_supply); |
| if (ret) |
| dev_warn(dev, "Failed to enable VBUS: %d\n", ret); |
| wusb3801->vbus_on = true; |
| } |
| } else { |
| if (wusb3801->vbus_on) { |
| regulator_disable(wusb3801->vbus_supply); |
| wusb3801->vbus_on = false; |
| } |
| } |
| |
| if (partner_type != wusb3801->partner_type) { |
| struct typec_partner_desc desc = {}; |
| enum typec_data_role data_role; |
| enum typec_role pwr_role = wusb3801_get_default_role(wusb3801); |
| |
| switch (partner_type) { |
| case WUSB3801_STAT_PARTNER_STANDBY: |
| break; |
| case WUSB3801_STAT_PARTNER_SNK: |
| pwr_role = TYPEC_SOURCE; |
| break; |
| case WUSB3801_STAT_PARTNER_SRC: |
| pwr_role = TYPEC_SINK; |
| break; |
| case WUSB3801_STAT_PARTNER_AUDIO: |
| desc.accessory = TYPEC_ACCESSORY_AUDIO; |
| break; |
| case WUSB3801_STAT_PARTNER_DEBUG: |
| desc.accessory = TYPEC_ACCESSORY_DEBUG; |
| break; |
| } |
| |
| if (wusb3801->partner) { |
| typec_unregister_partner(wusb3801->partner); |
| wusb3801->partner = NULL; |
| } |
| |
| if (partner_type != WUSB3801_STAT_PARTNER_STANDBY) { |
| wusb3801->partner = typec_register_partner(port, &desc); |
| if (IS_ERR(wusb3801->partner)) |
| dev_err(dev, "Failed to register partner: %ld\n", |
| PTR_ERR(wusb3801->partner)); |
| } |
| |
| data_role = pwr_role == TYPEC_SOURCE ? TYPEC_HOST : TYPEC_DEVICE; |
| typec_set_data_role(port, data_role); |
| typec_set_pwr_role(port, pwr_role); |
| typec_set_vconn_role(port, pwr_role); |
| } |
| |
| typec_set_pwr_opmode(wusb3801->port, |
| partner_type == WUSB3801_STAT_PARTNER_SRC |
| ? wusb3801_unmap_pwr_opmode(status) |
| : wusb3801->pwr_opmode); |
| typec_set_orientation(wusb3801->port, |
| wusb3801_unmap_orientation(status)); |
| |
| wusb3801->partner_type = partner_type; |
| } |
| |
| static irqreturn_t wusb3801_irq(int irq, void *data) |
| { |
| struct wusb3801 *wusb3801 = data; |
| unsigned int dummy; |
| |
| /* |
| * The interrupt register must be read in order to clear the IRQ, |
| * but all of the useful information is in the status register. |
| */ |
| regmap_read(wusb3801->regmap, WUSB3801_REG_INT, &dummy); |
| |
| wusb3801_hw_update(wusb3801); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = WUSB3801_REG_TEST12, |
| }; |
| |
| static int wusb3801_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct fwnode_handle *connector; |
| struct wusb3801 *wusb3801; |
| const char *cap_str; |
| int ret; |
| |
| wusb3801 = devm_kzalloc(dev, sizeof(*wusb3801), GFP_KERNEL); |
| if (!wusb3801) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, wusb3801); |
| |
| wusb3801->dev = dev; |
| |
| wusb3801->regmap = devm_regmap_init_i2c(client, &config); |
| if (IS_ERR(wusb3801->regmap)) |
| return PTR_ERR(wusb3801->regmap); |
| |
| wusb3801->vbus_supply = devm_regulator_get(dev, "vbus"); |
| if (IS_ERR(wusb3801->vbus_supply)) |
| return PTR_ERR(wusb3801->vbus_supply); |
| |
| connector = device_get_named_child_node(dev, "connector"); |
| if (!connector) |
| return -ENODEV; |
| |
| ret = typec_get_fw_cap(&wusb3801->cap, connector); |
| if (ret) |
| goto err_put_connector; |
| wusb3801->port_type = wusb3801->cap.type; |
| |
| ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str); |
| if (ret) |
| goto err_put_connector; |
| |
| ret = typec_find_pwr_opmode(cap_str); |
| if (ret < 0 || ret == TYPEC_PWR_MODE_PD) |
| goto err_put_connector; |
| wusb3801->pwr_opmode = ret; |
| |
| /* Initialize the hardware with the devicetree settings. */ |
| ret = wusb3801_hw_init(wusb3801); |
| if (ret) |
| return ret; |
| |
| wusb3801->cap.revision = USB_TYPEC_REV_1_2; |
| wusb3801->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO; |
| wusb3801->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG; |
| wusb3801->cap.orientation_aware = true; |
| wusb3801->cap.driver_data = wusb3801; |
| wusb3801->cap.ops = &wusb3801_typec_ops; |
| |
| wusb3801->port = typec_register_port(dev, &wusb3801->cap); |
| if (IS_ERR(wusb3801->port)) { |
| ret = PTR_ERR(wusb3801->port); |
| goto err_put_connector; |
| } |
| |
| /* Initialize the port attributes from the hardware state. */ |
| wusb3801_hw_update(wusb3801); |
| |
| ret = request_threaded_irq(client->irq, NULL, wusb3801_irq, |
| IRQF_ONESHOT, dev_name(dev), wusb3801); |
| if (ret) |
| goto err_unregister_port; |
| |
| fwnode_handle_put(connector); |
| |
| return 0; |
| |
| err_unregister_port: |
| typec_unregister_port(wusb3801->port); |
| err_put_connector: |
| fwnode_handle_put(connector); |
| |
| return ret; |
| } |
| |
| static void wusb3801_remove(struct i2c_client *client) |
| { |
| struct wusb3801 *wusb3801 = i2c_get_clientdata(client); |
| |
| free_irq(client->irq, wusb3801); |
| |
| if (wusb3801->partner) |
| typec_unregister_partner(wusb3801->partner); |
| typec_unregister_port(wusb3801->port); |
| |
| if (wusb3801->vbus_on) |
| regulator_disable(wusb3801->vbus_supply); |
| } |
| |
| static const struct of_device_id wusb3801_of_match[] = { |
| { .compatible = "willsemi,wusb3801" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, wusb3801_of_match); |
| |
| static struct i2c_driver wusb3801_driver = { |
| .probe_new = wusb3801_probe, |
| .remove = wusb3801_remove, |
| .driver = { |
| .name = "wusb3801", |
| .of_match_table = wusb3801_of_match, |
| }, |
| }; |
| |
| module_i2c_driver(wusb3801_driver); |
| |
| MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); |
| MODULE_DESCRIPTION("Willsemi WUSB3801 Type-C port controller driver"); |
| MODULE_LICENSE("GPL"); |