| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 Nuvoton Technology corporation. |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/reset-controller.h> |
| #include <linux/spinlock.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/of_address.h> |
| |
| /* NPCM7xx GCR registers */ |
| #define NPCM_MDLR_OFFSET 0x7C |
| #define NPCM7XX_MDLR_USBD0 BIT(9) |
| #define NPCM7XX_MDLR_USBD1 BIT(8) |
| #define NPCM7XX_MDLR_USBD2_4 BIT(21) |
| #define NPCM7XX_MDLR_USBD5_9 BIT(22) |
| |
| /* NPCM8xx MDLR bits */ |
| #define NPCM8XX_MDLR_USBD0_3 BIT(9) |
| #define NPCM8XX_MDLR_USBD4_7 BIT(22) |
| #define NPCM8XX_MDLR_USBD8 BIT(24) |
| #define NPCM8XX_MDLR_USBD9 BIT(21) |
| |
| #define NPCM_USB1PHYCTL_OFFSET 0x140 |
| #define NPCM_USB2PHYCTL_OFFSET 0x144 |
| #define NPCM_USB3PHYCTL_OFFSET 0x148 |
| #define NPCM_USBXPHYCTL_RS BIT(28) |
| |
| /* NPCM7xx Reset registers */ |
| #define NPCM_SWRSTR 0x14 |
| #define NPCM_SWRST BIT(2) |
| |
| #define NPCM_IPSRST1 0x20 |
| #define NPCM_IPSRST1_USBD1 BIT(5) |
| #define NPCM_IPSRST1_USBD2 BIT(8) |
| #define NPCM_IPSRST1_USBD3 BIT(25) |
| #define NPCM_IPSRST1_USBD4 BIT(22) |
| #define NPCM_IPSRST1_USBD5 BIT(23) |
| #define NPCM_IPSRST1_USBD6 BIT(24) |
| |
| #define NPCM_IPSRST2 0x24 |
| #define NPCM_IPSRST2_USB_HOST BIT(26) |
| |
| #define NPCM_IPSRST3 0x34 |
| #define NPCM_IPSRST3_USBD0 BIT(4) |
| #define NPCM_IPSRST3_USBD7 BIT(5) |
| #define NPCM_IPSRST3_USBD8 BIT(6) |
| #define NPCM_IPSRST3_USBD9 BIT(7) |
| #define NPCM_IPSRST3_USBPHY1 BIT(24) |
| #define NPCM_IPSRST3_USBPHY2 BIT(25) |
| |
| #define NPCM_IPSRST4 0x74 |
| #define NPCM_IPSRST4_USBPHY3 BIT(25) |
| #define NPCM_IPSRST4_USB_HOST2 BIT(31) |
| |
| #define NPCM_RC_RESETS_PER_REG 32 |
| #define NPCM_MASK_RESETS GENMASK(4, 0) |
| |
| enum { |
| BMC_NPCM7XX = 0, |
| BMC_NPCM8XX, |
| }; |
| |
| static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3}; |
| static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3, |
| NPCM_IPSRST4}; |
| |
| struct npcm_reset_info { |
| u32 bmc_id; |
| u32 num_ipsrst; |
| const u32 *ipsrst; |
| }; |
| |
| static const struct npcm_reset_info npxm7xx_reset_info[] = { |
| {.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}}; |
| static const struct npcm_reset_info npxm8xx_reset_info[] = { |
| {.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}}; |
| |
| struct npcm_rc_data { |
| struct reset_controller_dev rcdev; |
| struct notifier_block restart_nb; |
| const struct npcm_reset_info *info; |
| struct regmap *gcr_regmap; |
| u32 sw_reset_number; |
| void __iomem *base; |
| spinlock_t lock; |
| }; |
| |
| #define to_rc_data(p) container_of(p, struct npcm_rc_data, rcdev) |
| |
| static int npcm_rc_restart(struct notifier_block *nb, unsigned long mode, |
| void *cmd) |
| { |
| struct npcm_rc_data *rc = container_of(nb, struct npcm_rc_data, |
| restart_nb); |
| |
| writel(NPCM_SWRST << rc->sw_reset_number, rc->base + NPCM_SWRSTR); |
| mdelay(1000); |
| |
| pr_emerg("%s: unable to restart system\n", __func__); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int npcm_rc_setclear_reset(struct reset_controller_dev *rcdev, |
| unsigned long id, bool set) |
| { |
| struct npcm_rc_data *rc = to_rc_data(rcdev); |
| unsigned int rst_bit = BIT(id & NPCM_MASK_RESETS); |
| unsigned int ctrl_offset = id >> 8; |
| unsigned long flags; |
| u32 stat; |
| |
| spin_lock_irqsave(&rc->lock, flags); |
| stat = readl(rc->base + ctrl_offset); |
| if (set) |
| writel(stat | rst_bit, rc->base + ctrl_offset); |
| else |
| writel(stat & ~rst_bit, rc->base + ctrl_offset); |
| spin_unlock_irqrestore(&rc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int npcm_rc_assert(struct reset_controller_dev *rcdev, unsigned long id) |
| { |
| return npcm_rc_setclear_reset(rcdev, id, true); |
| } |
| |
| static int npcm_rc_deassert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| return npcm_rc_setclear_reset(rcdev, id, false); |
| } |
| |
| static int npcm_rc_status(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct npcm_rc_data *rc = to_rc_data(rcdev); |
| unsigned int rst_bit = BIT(id & NPCM_MASK_RESETS); |
| unsigned int ctrl_offset = id >> 8; |
| |
| return (readl(rc->base + ctrl_offset) & rst_bit); |
| } |
| |
| static int npcm_reset_xlate(struct reset_controller_dev *rcdev, |
| const struct of_phandle_args *reset_spec) |
| { |
| struct npcm_rc_data *rc = to_rc_data(rcdev); |
| unsigned int offset, bit; |
| bool offset_found = false; |
| int off_num; |
| |
| offset = reset_spec->args[0]; |
| for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) { |
| if (offset == rc->info->ipsrst[off_num]) { |
| offset_found = true; |
| break; |
| } |
| } |
| |
| if (!offset_found) { |
| dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset); |
| return -EINVAL; |
| } |
| |
| bit = reset_spec->args[1]; |
| if (bit >= NPCM_RC_RESETS_PER_REG) { |
| dev_err(rcdev->dev, "Error reset number (%d)\n", bit); |
| return -EINVAL; |
| } |
| |
| return (offset << 8) | bit; |
| } |
| |
| static const struct of_device_id npcm_rc_match[] = { |
| { .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info}, |
| { .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info}, |
| { } |
| }; |
| |
| static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc) |
| { |
| u32 mdlr, iprst1, iprst2, iprst3; |
| u32 ipsrst1_bits = 0; |
| u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST; |
| u32 ipsrst3_bits = 0; |
| |
| /* checking which USB device is enabled */ |
| regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr); |
| if (!(mdlr & NPCM7XX_MDLR_USBD0)) |
| ipsrst3_bits |= NPCM_IPSRST3_USBD0; |
| if (!(mdlr & NPCM7XX_MDLR_USBD1)) |
| ipsrst1_bits |= NPCM_IPSRST1_USBD1; |
| if (!(mdlr & NPCM7XX_MDLR_USBD2_4)) |
| ipsrst1_bits |= (NPCM_IPSRST1_USBD2 | |
| NPCM_IPSRST1_USBD3 | |
| NPCM_IPSRST1_USBD4); |
| if (!(mdlr & NPCM7XX_MDLR_USBD0)) { |
| ipsrst1_bits |= (NPCM_IPSRST1_USBD5 | |
| NPCM_IPSRST1_USBD6); |
| ipsrst3_bits |= (NPCM_IPSRST3_USBD7 | |
| NPCM_IPSRST3_USBD8 | |
| NPCM_IPSRST3_USBD9); |
| } |
| |
| /* assert reset USB PHY and USB devices */ |
| iprst1 = readl(rc->base + NPCM_IPSRST1); |
| iprst2 = readl(rc->base + NPCM_IPSRST2); |
| iprst3 = readl(rc->base + NPCM_IPSRST3); |
| |
| iprst1 |= ipsrst1_bits; |
| iprst2 |= ipsrst2_bits; |
| iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 | |
| NPCM_IPSRST3_USBPHY2); |
| |
| writel(iprst1, rc->base + NPCM_IPSRST1); |
| writel(iprst2, rc->base + NPCM_IPSRST2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| |
| /* clear USB PHY RS bit */ |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, 0); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, 0); |
| |
| /* deassert reset USB PHY */ |
| iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| |
| udelay(50); |
| |
| /* set USB PHY RS bit */ |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); |
| |
| /* deassert reset USB devices*/ |
| iprst1 &= ~ipsrst1_bits; |
| iprst2 &= ~ipsrst2_bits; |
| iprst3 &= ~ipsrst3_bits; |
| |
| writel(iprst1, rc->base + NPCM_IPSRST1); |
| writel(iprst2, rc->base + NPCM_IPSRST2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| } |
| |
| static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc) |
| { |
| u32 mdlr, iprst1, iprst2, iprst3, iprst4; |
| u32 ipsrst1_bits = 0; |
| u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST; |
| u32 ipsrst3_bits = 0; |
| u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3; |
| |
| /* checking which USB device is enabled */ |
| regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr); |
| if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) { |
| ipsrst3_bits |= NPCM_IPSRST3_USBD0; |
| ipsrst1_bits |= (NPCM_IPSRST1_USBD1 | |
| NPCM_IPSRST1_USBD2 | |
| NPCM_IPSRST1_USBD3); |
| } |
| if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) { |
| ipsrst1_bits |= (NPCM_IPSRST1_USBD4 | |
| NPCM_IPSRST1_USBD5 | |
| NPCM_IPSRST1_USBD6); |
| ipsrst3_bits |= NPCM_IPSRST3_USBD7; |
| } |
| |
| if (!(mdlr & NPCM8XX_MDLR_USBD8)) |
| ipsrst3_bits |= NPCM_IPSRST3_USBD8; |
| if (!(mdlr & NPCM8XX_MDLR_USBD9)) |
| ipsrst3_bits |= NPCM_IPSRST3_USBD9; |
| |
| /* assert reset USB PHY and USB devices */ |
| iprst1 = readl(rc->base + NPCM_IPSRST1); |
| iprst2 = readl(rc->base + NPCM_IPSRST2); |
| iprst3 = readl(rc->base + NPCM_IPSRST3); |
| iprst4 = readl(rc->base + NPCM_IPSRST4); |
| |
| iprst1 |= ipsrst1_bits; |
| iprst2 |= ipsrst2_bits; |
| iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 | |
| NPCM_IPSRST3_USBPHY2); |
| iprst4 |= ipsrst4_bits; |
| |
| writel(iprst1, rc->base + NPCM_IPSRST1); |
| writel(iprst2, rc->base + NPCM_IPSRST2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| writel(iprst4, rc->base + NPCM_IPSRST4); |
| |
| /* clear USB PHY RS bit */ |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, 0); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, 0); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, 0); |
| |
| /* deassert reset USB PHY */ |
| iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| iprst4 &= ~NPCM_IPSRST4_USBPHY3; |
| writel(iprst4, rc->base + NPCM_IPSRST4); |
| |
| /* set USB PHY RS bit */ |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); |
| regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET, |
| NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS); |
| |
| /* deassert reset USB devices*/ |
| iprst1 &= ~ipsrst1_bits; |
| iprst2 &= ~ipsrst2_bits; |
| iprst3 &= ~ipsrst3_bits; |
| iprst4 &= ~ipsrst4_bits; |
| |
| writel(iprst1, rc->base + NPCM_IPSRST1); |
| writel(iprst2, rc->base + NPCM_IPSRST2); |
| writel(iprst3, rc->base + NPCM_IPSRST3); |
| writel(iprst4, rc->base + NPCM_IPSRST4); |
| } |
| |
| /* |
| * The following procedure should be observed in USB PHY, USB device and |
| * USB host initialization at BMC boot |
| */ |
| static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc) |
| { |
| struct device *dev = &pdev->dev; |
| |
| rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr"); |
| if (IS_ERR(rc->gcr_regmap)) { |
| dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n"); |
| dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n"); |
| rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); |
| if (IS_ERR(rc->gcr_regmap)) { |
| dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr"); |
| return PTR_ERR(rc->gcr_regmap); |
| } |
| } |
| |
| rc->info = (const struct npcm_reset_info *) |
| of_match_device(dev->driver->of_match_table, dev)->data; |
| switch (rc->info->bmc_id) { |
| case BMC_NPCM7XX: |
| npcm_usb_reset_npcm7xx(rc); |
| break; |
| case BMC_NPCM8XX: |
| npcm_usb_reset_npcm8xx(rc); |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static const struct reset_control_ops npcm_rc_ops = { |
| .assert = npcm_rc_assert, |
| .deassert = npcm_rc_deassert, |
| .status = npcm_rc_status, |
| }; |
| |
| static int npcm_rc_probe(struct platform_device *pdev) |
| { |
| struct npcm_rc_data *rc; |
| int ret; |
| |
| rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL); |
| if (!rc) |
| return -ENOMEM; |
| |
| rc->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(rc->base)) |
| return PTR_ERR(rc->base); |
| |
| spin_lock_init(&rc->lock); |
| |
| rc->rcdev.owner = THIS_MODULE; |
| rc->rcdev.ops = &npcm_rc_ops; |
| rc->rcdev.of_node = pdev->dev.of_node; |
| rc->rcdev.of_reset_n_cells = 2; |
| rc->rcdev.of_xlate = npcm_reset_xlate; |
| |
| ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to register device\n"); |
| return ret; |
| } |
| |
| if (npcm_usb_reset(pdev, rc)) |
| dev_warn(&pdev->dev, "NPCM USB reset failed, can cause issues with UDC and USB host\n"); |
| |
| if (!of_property_read_u32(pdev->dev.of_node, "nuvoton,sw-reset-number", |
| &rc->sw_reset_number)) { |
| if (rc->sw_reset_number && rc->sw_reset_number < 5) { |
| rc->restart_nb.priority = 192, |
| rc->restart_nb.notifier_call = npcm_rc_restart, |
| ret = register_restart_handler(&rc->restart_nb); |
| if (ret) |
| dev_warn(&pdev->dev, "failed to register restart handler\n"); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static struct platform_driver npcm_rc_driver = { |
| .probe = npcm_rc_probe, |
| .driver = { |
| .name = "npcm-reset", |
| .of_match_table = npcm_rc_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| builtin_platform_driver(npcm_rc_driver); |