| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ip30-xtalk.c - Very basic Crosstalk (XIO) detection support. |
| * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org> |
| * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de> |
| * Copyright (C) 2007, 2014-2016 Joshua Kinard <kumba@gentoo.org> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/sgi-w1.h> |
| #include <linux/platform_data/xtalk-bridge.h> |
| |
| #include <asm/xtalk/xwidget.h> |
| #include <asm/pci/bridge.h> |
| |
| #define IP30_SWIN_BASE(widget) \ |
| (0x0000000010000000 | (((unsigned long)(widget)) << 24)) |
| |
| #define IP30_RAW_SWIN_BASE(widget) (IO_BASE + IP30_SWIN_BASE(widget)) |
| |
| #define IP30_SWIN_SIZE (1 << 24) |
| |
| #define IP30_WIDGET_XBOW _AC(0x0, UL) /* XBow is always 0 */ |
| #define IP30_WIDGET_HEART _AC(0x8, UL) /* HEART is always 8 */ |
| #define IP30_WIDGET_PCI_BASE _AC(0xf, UL) /* BaseIO PCI is always 15 */ |
| |
| #define XTALK_NODEV 0xffffffff |
| |
| #define XBOW_REG_LINK_STAT_0 0x114 |
| #define XBOW_REG_LINK_BLK_SIZE 0x40 |
| #define XBOW_REG_LINK_ALIVE 0x80000000 |
| |
| #define HEART_INTR_ADDR 0x00000080 |
| |
| #define xtalk_read __raw_readl |
| |
| static void bridge_platform_create(int widget, int masterwid) |
| { |
| struct xtalk_bridge_platform_data *bd; |
| struct sgi_w1_platform_data *wd; |
| struct platform_device *pdev; |
| struct resource w1_res; |
| |
| wd = kzalloc(sizeof(*wd), GFP_KERNEL); |
| if (!wd) |
| goto no_mem; |
| |
| snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", |
| IP30_SWIN_BASE(widget)); |
| |
| memset(&w1_res, 0, sizeof(w1_res)); |
| w1_res.start = IP30_SWIN_BASE(widget) + |
| offsetof(struct bridge_regs, b_nic); |
| w1_res.end = w1_res.start + 3; |
| w1_res.flags = IORESOURCE_MEM; |
| |
| pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); |
| if (!pdev) { |
| kfree(wd); |
| goto no_mem; |
| } |
| platform_device_add_resources(pdev, &w1_res, 1); |
| platform_device_add_data(pdev, wd, sizeof(*wd)); |
| /* platform_device_add_data() duplicates the data */ |
| kfree(wd); |
| platform_device_add(pdev); |
| |
| bd = kzalloc(sizeof(*bd), GFP_KERNEL); |
| if (!bd) |
| goto no_mem; |
| pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO); |
| if (!pdev) { |
| kfree(bd); |
| goto no_mem; |
| } |
| |
| bd->bridge_addr = IP30_RAW_SWIN_BASE(widget); |
| bd->intr_addr = HEART_INTR_ADDR; |
| bd->nasid = 0; |
| bd->masterwid = masterwid; |
| |
| bd->mem.name = "Bridge PCI MEM"; |
| bd->mem.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0; |
| bd->mem.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1; |
| bd->mem.flags = IORESOURCE_MEM; |
| bd->mem_offset = IP30_SWIN_BASE(widget); |
| |
| bd->io.name = "Bridge PCI IO"; |
| bd->io.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0; |
| bd->io.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1; |
| bd->io.flags = IORESOURCE_IO; |
| bd->io_offset = IP30_SWIN_BASE(widget); |
| |
| platform_device_add_data(pdev, bd, sizeof(*bd)); |
| /* platform_device_add_data() duplicates the data */ |
| kfree(bd); |
| platform_device_add(pdev); |
| pr_info("xtalk:%x bridge widget\n", widget); |
| return; |
| |
| no_mem: |
| pr_warn("xtalk:%x bridge create out of memory\n", widget); |
| } |
| |
| static unsigned int __init xbow_widget_active(s8 wid) |
| { |
| unsigned int link_stat; |
| |
| link_stat = xtalk_read((void *)(IP30_RAW_SWIN_BASE(IP30_WIDGET_XBOW) + |
| XBOW_REG_LINK_STAT_0 + |
| XBOW_REG_LINK_BLK_SIZE * |
| (wid - 8))); |
| |
| return (link_stat & XBOW_REG_LINK_ALIVE) ? 1 : 0; |
| } |
| |
| static void __init xtalk_init_widget(s8 wid, s8 masterwid) |
| { |
| xwidget_part_num_t partnum; |
| widgetreg_t widget_id; |
| |
| if (!xbow_widget_active(wid)) |
| return; |
| |
| widget_id = xtalk_read((void *)(IP30_RAW_SWIN_BASE(wid) + WIDGET_ID)); |
| |
| partnum = XWIDGET_PART_NUM(widget_id); |
| |
| switch (partnum) { |
| case BRIDGE_WIDGET_PART_NUM: |
| case XBRIDGE_WIDGET_PART_NUM: |
| bridge_platform_create(wid, masterwid); |
| break; |
| default: |
| pr_info("xtalk:%x unknown widget (0x%x)\n", wid, partnum); |
| break; |
| } |
| } |
| |
| static int __init ip30_xtalk_init(void) |
| { |
| int i; |
| |
| /* |
| * Walk widget IDs backwards so that BaseIO is probed first. This |
| * ensures that the BaseIO IOC3 is always detected as eth0. |
| */ |
| for (i = IP30_WIDGET_PCI_BASE; i > IP30_WIDGET_HEART; i--) |
| xtalk_init_widget(i, IP30_WIDGET_HEART); |
| |
| return 0; |
| } |
| |
| arch_initcall(ip30_xtalk_init); |