| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Tascam US-16x08 ALSA driver |
| * |
| * Copyright (c) 2016 by Detlef Urban (onkel@paraair.de) |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/usb/audio-v2.h> |
| |
| #include <sound/core.h> |
| #include <sound/control.h> |
| |
| #include "usbaudio.h" |
| #include "mixer.h" |
| #include "helper.h" |
| |
| #include "mixer_us16x08.h" |
| |
| /* USB control message templates */ |
| static const char route_msg[] = { |
| 0x61, |
| 0x02, |
| 0x03, /* input from master (0x02) or input from computer bus (0x03) */ |
| 0x62, |
| 0x02, |
| 0x01, /* input index (0x01/0x02 eq. left/right) or bus (0x01-0x08) */ |
| 0x41, |
| 0x01, |
| 0x61, |
| 0x02, |
| 0x01, |
| 0x62, |
| 0x02, |
| 0x01, /* output index (0x01-0x08) */ |
| 0x42, |
| 0x01, |
| 0x43, |
| 0x01, |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char mix_init_msg1[] = { |
| 0x71, 0x01, 0x00, 0x00 |
| }; |
| |
| static const char mix_init_msg2[] = { |
| 0x62, 0x02, 0x00, 0x61, 0x02, 0x04, 0xb1, 0x01, 0x00, 0x00 |
| }; |
| |
| static const char mix_msg_in[] = { |
| /* default message head, equal to all mixers */ |
| 0x61, 0x02, 0x04, 0x62, 0x02, 0x01, |
| 0x81, /* 0x06: Controller ID */ |
| 0x02, /* 0x07: */ |
| 0x00, /* 0x08: Value of common mixer */ |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char mix_msg_out[] = { |
| /* default message head, equal to all mixers */ |
| 0x61, 0x02, 0x02, 0x62, 0x02, 0x01, |
| 0x81, /* 0x06: Controller ID */ |
| 0x02, /* 0x07: */ |
| 0x00, /* 0x08: Value of common mixer */ |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char bypass_msg_out[] = { |
| 0x45, |
| 0x02, |
| 0x01, /* on/off flag */ |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char bus_msg_out[] = { |
| 0x44, |
| 0x02, |
| 0x01, /* on/off flag */ |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char comp_msg[] = { |
| /* default message head, equal to all mixers */ |
| 0x61, 0x02, 0x04, 0x62, 0x02, 0x01, |
| 0x91, |
| 0x02, |
| 0xf0, /* 0x08: Threshold db (8) (e0 ... 00) (+-0dB -- -32dB) x-32 */ |
| 0x92, |
| 0x02, |
| 0x0a, /* 0x0b: Ratio (0a,0b,0d,0f,11,14,19,1e,23,28,32,3c,50,a0,ff) */ |
| 0x93, |
| 0x02, |
| 0x02, /* 0x0e: Attack (0x02 ... 0xc0) (2ms ... 200ms) */ |
| 0x94, |
| 0x02, |
| 0x01, /* 0x11: Release (0x01 ... 0x64) (10ms ... 1000ms) x*10 */ |
| 0x95, |
| 0x02, |
| 0x03, /* 0x14: gain (0 ... 20) (0dB .. 20dB) */ |
| 0x96, |
| 0x02, |
| 0x01, |
| 0x97, |
| 0x02, |
| 0x01, /* 0x1a: main Comp switch (0 ... 1) (off ... on)) */ |
| 0x00, |
| 0x00 |
| }; |
| |
| static const char eqs_msq[] = { |
| /* default message head, equal to all mixers */ |
| 0x61, 0x02, 0x04, 0x62, 0x02, 0x01, |
| 0x51, /* 0x06: Controller ID */ |
| 0x02, |
| 0x04, /* 0x08: EQ set num (0x01..0x04) (LOW, LOWMID, HIGHMID, HIGH)) */ |
| 0x52, |
| 0x02, |
| 0x0c, /* 0x0b: value dB (0 ... 12) (-12db .. +12db) x-6 */ |
| 0x53, |
| 0x02, |
| 0x0f, /* 0x0e: value freq (32-47) (1.7kHz..18kHz) */ |
| 0x54, |
| 0x02, |
| 0x02, /* 0x11: band width (0-6) (Q16-Q0.25) 2^x/4 (EQ xxMID only) */ |
| 0x55, |
| 0x02, |
| 0x01, /* 0x14: main EQ switch (0 ... 1) (off ... on)) */ |
| 0x00, |
| 0x00 |
| }; |
| |
| /* compressor ratio map */ |
| static const char ratio_map[] = { |
| 0x0a, 0x0b, 0x0d, 0x0f, 0x11, 0x14, 0x19, 0x1e, |
| 0x23, 0x28, 0x32, 0x3c, 0x50, 0xa0, 0xff |
| }; |
| |
| /* route enumeration names */ |
| static const char *const route_names[] = { |
| "Master Left", "Master Right", "Output 1", "Output 2", "Output 3", |
| "Output 4", "Output 5", "Output 6", "Output 7", "Output 8", |
| }; |
| |
| static int snd_us16x08_recv_urb(struct snd_usb_audio *chip, |
| unsigned char *buf, int size) |
| { |
| |
| mutex_lock(&chip->mutex); |
| snd_usb_ctl_msg(chip->dev, |
| usb_rcvctrlpipe(chip->dev, 0), |
| SND_US16X08_URB_METER_REQUEST, |
| SND_US16X08_URB_METER_REQUESTTYPE, 0, 0, buf, size); |
| mutex_unlock(&chip->mutex); |
| return 0; |
| } |
| |
| /* wrapper function to send prepared URB buffer to usb device. Return an error |
| * code if something went wrong |
| */ |
| static int snd_us16x08_send_urb(struct snd_usb_audio *chip, char *buf, int size) |
| { |
| return snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), |
| SND_US16X08_URB_REQUEST, SND_US16X08_URB_REQUESTTYPE, |
| 0, 0, buf, size); |
| } |
| |
| static int snd_us16x08_route_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| return snd_ctl_enum_info(uinfo, 1, 10, route_names); |
| } |
| |
| static int snd_us16x08_route_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| int index = ucontrol->id.index; |
| |
| /* route has no bias */ |
| ucontrol->value.enumerated.item[0] = elem->cache_val[index]; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_route_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| int index = ucontrol->id.index; |
| char buf[sizeof(route_msg)]; |
| int val, val_org, err; |
| |
| /* get the new value (no bias for routes) */ |
| val = ucontrol->value.enumerated.item[0]; |
| |
| /* sanity check */ |
| if (val < 0 || val > 9) |
| return -EINVAL; |
| |
| /* prepare the message buffer from template */ |
| memcpy(buf, route_msg, sizeof(route_msg)); |
| |
| if (val < 2) { |
| /* input comes from a master channel */ |
| val_org = val; |
| buf[2] = 0x02; |
| } else { |
| /* input comes from a computer channel */ |
| buf[2] = 0x03; |
| val_org = val - 2; |
| } |
| |
| /* place new route selection in URB message */ |
| buf[5] = (unsigned char) (val_org & 0x0f) + 1; |
| /* place route selector in URB message */ |
| buf[13] = index + 1; |
| |
| err = snd_us16x08_send_urb(chip, buf, sizeof(route_msg)); |
| |
| if (err > 0) { |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set routing, err:%d\n", err); |
| } |
| |
| return err > 0 ? 1 : 0; |
| } |
| |
| static int snd_us16x08_master_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->count = 1; |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->value.integer.max = SND_US16X08_KCMAX(kcontrol); |
| uinfo->value.integer.min = SND_US16X08_KCMIN(kcontrol); |
| uinfo->value.integer.step = SND_US16X08_KCSTEP(kcontrol); |
| return 0; |
| } |
| |
| static int snd_us16x08_master_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| int index = ucontrol->id.index; |
| |
| ucontrol->value.integer.value[0] = elem->cache_val[index]; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_master_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| char buf[sizeof(mix_msg_out)]; |
| int val, err; |
| int index = ucontrol->id.index; |
| |
| /* new control value incl. bias*/ |
| val = ucontrol->value.integer.value[0]; |
| |
| /* sanity check */ |
| if (val < SND_US16X08_KCMIN(kcontrol) |
| || val > SND_US16X08_KCMAX(kcontrol)) |
| return -EINVAL; |
| |
| /* prepare the message buffer from template */ |
| memcpy(buf, mix_msg_out, sizeof(mix_msg_out)); |
| |
| buf[8] = val - SND_US16X08_KCBIAS(kcontrol); |
| buf[6] = elem->head.id; |
| |
| /* place channel selector in URB message */ |
| buf[5] = index + 1; |
| err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_out)); |
| |
| if (err > 0) { |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set master, err:%d\n", err); |
| } |
| |
| return err > 0 ? 1 : 0; |
| } |
| |
| static int snd_us16x08_bus_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| char buf[sizeof(mix_msg_out)]; |
| int val, err = 0; |
| |
| val = ucontrol->value.integer.value[0]; |
| |
| /* prepare the message buffer from template */ |
| switch (elem->head.id) { |
| case SND_US16X08_ID_BYPASS: |
| memcpy(buf, bypass_msg_out, sizeof(bypass_msg_out)); |
| buf[2] = val; |
| err = snd_us16x08_send_urb(chip, buf, sizeof(bypass_msg_out)); |
| break; |
| case SND_US16X08_ID_BUSS_OUT: |
| memcpy(buf, bus_msg_out, sizeof(bus_msg_out)); |
| buf[2] = val; |
| err = snd_us16x08_send_urb(chip, buf, sizeof(bus_msg_out)); |
| break; |
| case SND_US16X08_ID_MUTE: |
| memcpy(buf, mix_msg_out, sizeof(mix_msg_out)); |
| buf[8] = val; |
| buf[6] = elem->head.id; |
| buf[5] = 1; |
| err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_out)); |
| break; |
| } |
| |
| if (err > 0) { |
| elem->cached |= 1; |
| elem->cache_val[0] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set bus parameter, err:%d\n", err); |
| } |
| |
| return err > 0 ? 1 : 0; |
| } |
| |
| static int snd_us16x08_bus_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| |
| switch (elem->head.id) { |
| case SND_US16X08_ID_BUSS_OUT: |
| ucontrol->value.integer.value[0] = elem->cache_val[0]; |
| break; |
| case SND_US16X08_ID_BYPASS: |
| ucontrol->value.integer.value[0] = elem->cache_val[0]; |
| break; |
| case SND_US16X08_ID_MUTE: |
| ucontrol->value.integer.value[0] = elem->cache_val[0]; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* gets a current mixer value from common store */ |
| static int snd_us16x08_channel_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| int index = ucontrol->id.index; |
| |
| ucontrol->value.integer.value[0] = elem->cache_val[index]; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_channel_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| char buf[sizeof(mix_msg_in)]; |
| int val, err; |
| int index = ucontrol->id.index; |
| |
| val = ucontrol->value.integer.value[0]; |
| |
| /* sanity check */ |
| if (val < SND_US16X08_KCMIN(kcontrol) |
| || val > SND_US16X08_KCMAX(kcontrol)) |
| return -EINVAL; |
| |
| /* prepare URB message from template */ |
| memcpy(buf, mix_msg_in, sizeof(mix_msg_in)); |
| |
| /* add the bias to the new value */ |
| buf[8] = val - SND_US16X08_KCBIAS(kcontrol); |
| buf[6] = elem->head.id; |
| buf[5] = index + 1; |
| |
| err = snd_us16x08_send_urb(chip, buf, sizeof(mix_msg_in)); |
| |
| if (err > 0) { |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set channel, err:%d\n", err); |
| } |
| |
| return err > 0 ? 1 : 0; |
| } |
| |
| static int snd_us16x08_mix_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->count = 1; |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->value.integer.max = SND_US16X08_KCMAX(kcontrol); |
| uinfo->value.integer.min = SND_US16X08_KCMIN(kcontrol); |
| uinfo->value.integer.step = SND_US16X08_KCSTEP(kcontrol); |
| return 0; |
| } |
| |
| static int snd_us16x08_comp_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_us16x08_comp_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| int val_idx = COMP_STORE_IDX(elem->head.id); |
| |
| ucontrol->value.integer.value[0] = store->val[val_idx][index]; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_comp_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| struct snd_us16x08_comp_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| char buf[sizeof(comp_msg)]; |
| int val_idx, val; |
| int err; |
| |
| val = ucontrol->value.integer.value[0]; |
| |
| /* sanity check */ |
| if (val < SND_US16X08_KCMIN(kcontrol) |
| || val > SND_US16X08_KCMAX(kcontrol)) |
| return -EINVAL; |
| |
| /* new control value incl. bias*/ |
| val_idx = elem->head.id - SND_US16X08_ID_COMP_BASE; |
| |
| store->val[val_idx][index] = ucontrol->value.integer.value[0]; |
| |
| /* prepare compressor URB message from template */ |
| memcpy(buf, comp_msg, sizeof(comp_msg)); |
| |
| /* place comp values in message buffer watch bias! */ |
| buf[8] = store->val[ |
| COMP_STORE_IDX(SND_US16X08_ID_COMP_THRESHOLD)][index] |
| - SND_US16X08_COMP_THRESHOLD_BIAS; |
| buf[11] = ratio_map[store->val[ |
| COMP_STORE_IDX(SND_US16X08_ID_COMP_RATIO)][index]]; |
| buf[14] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_ATTACK)][index] |
| + SND_US16X08_COMP_ATTACK_BIAS; |
| buf[17] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RELEASE)][index] |
| + SND_US16X08_COMP_RELEASE_BIAS; |
| buf[20] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_GAIN)][index]; |
| buf[26] = store->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)][index]; |
| |
| /* place channel selector in message buffer */ |
| buf[5] = index + 1; |
| |
| err = snd_us16x08_send_urb(chip, buf, sizeof(comp_msg)); |
| |
| if (err > 0) { |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set compressor, err:%d\n", err); |
| } |
| |
| return 1; |
| } |
| |
| static int snd_us16x08_eqswitch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int val; |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_us16x08_eq_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| |
| /* get low switch from cache is enough, cause all bands are together */ |
| val = store->val[EQ_STORE_BAND_IDX(elem->head.id)] |
| [EQ_STORE_PARAM_IDX(elem->head.id)][index]; |
| ucontrol->value.integer.value[0] = val; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_eqswitch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| struct snd_us16x08_eq_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| char buf[sizeof(eqs_msq)]; |
| int val, err = 0; |
| int b_idx; |
| |
| /* new control value incl. bias*/ |
| val = ucontrol->value.integer.value[0] + SND_US16X08_KCBIAS(kcontrol); |
| |
| /* prepare URB message from EQ template */ |
| memcpy(buf, eqs_msq, sizeof(eqs_msq)); |
| |
| /* place channel index in URB message */ |
| buf[5] = index + 1; |
| for (b_idx = 0; b_idx < SND_US16X08_ID_EQ_BAND_COUNT; b_idx++) { |
| /* all four EQ bands have to be enabled/disabled in once */ |
| buf[20] = val; |
| buf[17] = store->val[b_idx][2][index]; |
| buf[14] = store->val[b_idx][1][index]; |
| buf[11] = store->val[b_idx][0][index]; |
| buf[8] = b_idx + 1; |
| err = snd_us16x08_send_urb(chip, buf, sizeof(eqs_msq)); |
| if (err < 0) |
| break; |
| store->val[b_idx][3][index] = val; |
| msleep(15); |
| } |
| |
| if (err > 0) { |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set eq switch, err:%d\n", err); |
| } |
| |
| return 1; |
| } |
| |
| static int snd_us16x08_eq_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int val; |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_us16x08_eq_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| int b_idx = EQ_STORE_BAND_IDX(elem->head.id) - 1; |
| int p_idx = EQ_STORE_PARAM_IDX(elem->head.id); |
| |
| val = store->val[b_idx][p_idx][index]; |
| |
| ucontrol->value.integer.value[0] = val; |
| |
| return 0; |
| } |
| |
| static int snd_us16x08_eq_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| struct snd_us16x08_eq_store *store = elem->private_data; |
| int index = ucontrol->id.index; |
| char buf[sizeof(eqs_msq)]; |
| int val, err; |
| int b_idx = EQ_STORE_BAND_IDX(elem->head.id) - 1; |
| int p_idx = EQ_STORE_PARAM_IDX(elem->head.id); |
| |
| val = ucontrol->value.integer.value[0]; |
| |
| /* sanity check */ |
| if (val < SND_US16X08_KCMIN(kcontrol) |
| || val > SND_US16X08_KCMAX(kcontrol)) |
| return -EINVAL; |
| |
| /* copy URB buffer from EQ template */ |
| memcpy(buf, eqs_msq, sizeof(eqs_msq)); |
| |
| store->val[b_idx][p_idx][index] = val; |
| buf[20] = store->val[b_idx][3][index]; |
| buf[17] = store->val[b_idx][2][index]; |
| buf[14] = store->val[b_idx][1][index]; |
| buf[11] = store->val[b_idx][0][index]; |
| |
| /* place channel index in URB buffer */ |
| buf[5] = index + 1; |
| |
| /* place EQ band in URB buffer */ |
| buf[8] = b_idx + 1; |
| |
| err = snd_us16x08_send_urb(chip, buf, sizeof(eqs_msq)); |
| |
| if (err > 0) { |
| /* store new value in EQ band cache */ |
| elem->cached |= 1 << index; |
| elem->cache_val[index] = val; |
| } else { |
| usb_audio_dbg(chip, "Failed to set eq param, err:%d\n", err); |
| } |
| |
| return 1; |
| } |
| |
| static int snd_us16x08_meter_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->count = 1; |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->value.integer.max = 0x7FFF; |
| uinfo->value.integer.min = 0; |
| |
| return 0; |
| } |
| |
| /* calculate compressor index for reduction level request */ |
| static int snd_get_meter_comp_index(struct snd_us16x08_meter_store *store) |
| { |
| int ret; |
| |
| /* any channel active */ |
| if (store->comp_active_index) { |
| /* check for stereo link */ |
| if (store->comp_active_index & 0x20) { |
| /* reset comp_index to left channel*/ |
| if (store->comp_index - |
| store->comp_active_index > 1) |
| store->comp_index = |
| store->comp_active_index; |
| |
| ret = store->comp_index++ & 0x1F; |
| } else { |
| /* no stereo link */ |
| ret = store->comp_active_index; |
| } |
| } else { |
| /* skip channels with no compressor active */ |
| while (!store->comp_store->val[ |
| COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)] |
| [store->comp_index - 1] |
| && store->comp_index <= SND_US16X08_MAX_CHANNELS) { |
| store->comp_index++; |
| } |
| ret = store->comp_index++; |
| if (store->comp_index > SND_US16X08_MAX_CHANNELS) |
| store->comp_index = 1; |
| } |
| return ret; |
| } |
| |
| /* retrieve the meter level values from URB message */ |
| static void get_meter_levels_from_urb(int s, |
| struct snd_us16x08_meter_store *store, |
| u8 *meter_urb) |
| { |
| int val = MUC2(meter_urb, s) + (MUC3(meter_urb, s) << 8); |
| |
| if (MUA0(meter_urb, s) == 0x61 && MUA1(meter_urb, s) == 0x02 && |
| MUA2(meter_urb, s) == 0x04 && MUB0(meter_urb, s) == 0x62) { |
| if (MUC0(meter_urb, s) == 0x72) |
| store->meter_level[MUB2(meter_urb, s) - 1] = val; |
| if (MUC0(meter_urb, s) == 0xb2) |
| store->comp_level[MUB2(meter_urb, s) - 1] = val; |
| } |
| if (MUA0(meter_urb, s) == 0x61 && MUA1(meter_urb, s) == 0x02 && |
| MUA2(meter_urb, s) == 0x02 && MUB0(meter_urb, s) == 0x62) |
| store->master_level[MUB2(meter_urb, s) - 1] = val; |
| } |
| |
| /* Function to retrieve current meter values from the device. |
| * |
| * The device needs to be polled for meter values with an initial |
| * requests. It will return with a sequence of different meter value |
| * packages. The first request (case 0:) initiate this meter response sequence. |
| * After the third response, an additional request can be placed, |
| * to retrieve compressor reduction level value for given channel. This round |
| * trip channel selector will skip all inactive compressors. |
| * A mixer can interrupt this round-trip by selecting one ore two (stereo-link) |
| * specific channels. |
| */ |
| static int snd_us16x08_meter_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| int i, set; |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_usb_audio *chip = elem->head.mixer->chip; |
| struct snd_us16x08_meter_store *store = elem->private_data; |
| u8 meter_urb[64]; |
| |
| switch (kcontrol->private_value) { |
| case 0: { |
| char tmp[sizeof(mix_init_msg1)]; |
| |
| memcpy(tmp, mix_init_msg1, sizeof(mix_init_msg1)); |
| snd_us16x08_send_urb(chip, tmp, 4); |
| snd_us16x08_recv_urb(chip, meter_urb, |
| sizeof(meter_urb)); |
| kcontrol->private_value++; |
| break; |
| } |
| case 1: |
| snd_us16x08_recv_urb(chip, meter_urb, |
| sizeof(meter_urb)); |
| kcontrol->private_value++; |
| break; |
| case 2: |
| snd_us16x08_recv_urb(chip, meter_urb, |
| sizeof(meter_urb)); |
| kcontrol->private_value++; |
| break; |
| case 3: { |
| char tmp[sizeof(mix_init_msg2)]; |
| |
| memcpy(tmp, mix_init_msg2, sizeof(mix_init_msg2)); |
| tmp[2] = snd_get_meter_comp_index(store); |
| snd_us16x08_send_urb(chip, tmp, 10); |
| snd_us16x08_recv_urb(chip, meter_urb, |
| sizeof(meter_urb)); |
| kcontrol->private_value = 0; |
| break; |
| } |
| } |
| |
| for (set = 0; set < 6; set++) |
| get_meter_levels_from_urb(set, store, meter_urb); |
| |
| for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) { |
| ucontrol->value.integer.value[i] = |
| store ? store->meter_level[i] : 0; |
| } |
| |
| ucontrol->value.integer.value[i++] = store ? store->master_level[0] : 0; |
| ucontrol->value.integer.value[i++] = store ? store->master_level[1] : 0; |
| |
| for (i = 2; i < SND_US16X08_MAX_CHANNELS + 2; i++) |
| ucontrol->value.integer.value[i + SND_US16X08_MAX_CHANNELS] = |
| store ? store->comp_level[i - 2] : 0; |
| |
| return 1; |
| } |
| |
| static int snd_us16x08_meter_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kcontrol->private_data; |
| struct snd_us16x08_meter_store *store = elem->private_data; |
| int val; |
| |
| val = ucontrol->value.integer.value[0]; |
| |
| /* sanity check */ |
| if (val < 0 || val >= SND_US16X08_MAX_CHANNELS) |
| return -EINVAL; |
| |
| store->comp_active_index = val; |
| store->comp_index = val; |
| |
| return 1; |
| } |
| |
| static const struct snd_kcontrol_new snd_us16x08_ch_boolean_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_switch_info, |
| .get = snd_us16x08_channel_get, |
| .put = snd_us16x08_channel_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_ch_int_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_channel_get, |
| .put = snd_us16x08_channel_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_FADER_BIAS, 1, 0, 133) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_pan_int_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_channel_get, |
| .put = snd_us16x08_channel_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_FADER_BIAS, 1, 0, 255) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_master_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 1, |
| .info = snd_us16x08_master_info, |
| .get = snd_us16x08_master_get, |
| .put = snd_us16x08_master_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_FADER_BIAS, 1, 0, 133) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_route_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 8, |
| .info = snd_us16x08_route_info, |
| .get = snd_us16x08_route_get, |
| .put = snd_us16x08_route_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 9) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_bus_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 1, |
| .info = snd_us16x08_switch_info, |
| .get = snd_us16x08_bus_get, |
| .put = snd_us16x08_bus_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_compswitch_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_switch_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_comp_threshold_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_COMP_THRESHOLD_BIAS, 1, |
| 0, 0x20) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_comp_ratio_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, |
| sizeof(ratio_map) - 1), /*max*/ |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_comp_gain_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x14) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_comp_attack_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = |
| SND_US16X08_KCSET(SND_US16X08_COMP_ATTACK_BIAS, 1, 0, 0xc6), |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_comp_release_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_comp_get, |
| .put = snd_us16x08_comp_put, |
| .private_value = |
| SND_US16X08_KCSET(SND_US16X08_COMP_RELEASE_BIAS, 1, 0, 0x63), |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_gain_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_eq_get, |
| .put = snd_us16x08_eq_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 24), |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_low_freq_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_eq_get, |
| .put = snd_us16x08_eq_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x1F), |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_mid_freq_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_eq_get, |
| .put = snd_us16x08_eq_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x3F) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_mid_width_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_eq_get, |
| .put = snd_us16x08_eq_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 0x06) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_high_freq_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_mix_info, |
| .get = snd_us16x08_eq_get, |
| .put = snd_us16x08_eq_put, |
| .private_value = |
| SND_US16X08_KCSET(SND_US16X08_EQ_HIGHFREQ_BIAS, 1, 0, 0x1F) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_eq_switch_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 16, |
| .info = snd_us16x08_switch_info, |
| .get = snd_us16x08_eqswitch_get, |
| .put = snd_us16x08_eqswitch_put, |
| .private_value = SND_US16X08_KCSET(SND_US16X08_NO_BIAS, 1, 0, 1) |
| }; |
| |
| static const struct snd_kcontrol_new snd_us16x08_meter_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .count = 1, |
| .info = snd_us16x08_meter_info, |
| .get = snd_us16x08_meter_get, |
| .put = snd_us16x08_meter_put |
| }; |
| |
| /* control store preparation */ |
| |
| /* setup compressor store and assign default value */ |
| static struct snd_us16x08_comp_store *snd_us16x08_create_comp_store(void) |
| { |
| int i; |
| struct snd_us16x08_comp_store *tmp; |
| |
| tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); |
| if (!tmp) |
| return NULL; |
| |
| for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) { |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_THRESHOLD)][i] |
| = 0x20; |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RATIO)][i] = 0x00; |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_GAIN)][i] = 0x00; |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_SWITCH)][i] = 0x00; |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_ATTACK)][i] = 0x00; |
| tmp->val[COMP_STORE_IDX(SND_US16X08_ID_COMP_RELEASE)][i] = 0x00; |
| } |
| return tmp; |
| } |
| |
| /* setup EQ store and assign default values */ |
| static struct snd_us16x08_eq_store *snd_us16x08_create_eq_store(void) |
| { |
| int i, b_idx; |
| struct snd_us16x08_eq_store *tmp; |
| |
| tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); |
| if (!tmp) |
| return NULL; |
| |
| for (i = 0; i < SND_US16X08_MAX_CHANNELS; i++) { |
| for (b_idx = 0; b_idx < SND_US16X08_ID_EQ_BAND_COUNT; b_idx++) { |
| tmp->val[b_idx][0][i] = 0x0c; |
| tmp->val[b_idx][3][i] = 0x00; |
| switch (b_idx) { |
| case 0: /* EQ Low */ |
| tmp->val[b_idx][1][i] = 0x05; |
| tmp->val[b_idx][2][i] = 0xff; |
| break; |
| case 1: /* EQ Mid low */ |
| tmp->val[b_idx][1][i] = 0x0e; |
| tmp->val[b_idx][2][i] = 0x02; |
| break; |
| case 2: /* EQ Mid High */ |
| tmp->val[b_idx][1][i] = 0x1b; |
| tmp->val[b_idx][2][i] = 0x02; |
| break; |
| case 3: /* EQ High */ |
| tmp->val[b_idx][1][i] = 0x2f |
| - SND_US16X08_EQ_HIGHFREQ_BIAS; |
| tmp->val[b_idx][2][i] = 0xff; |
| break; |
| } |
| } |
| } |
| return tmp; |
| } |
| |
| static struct snd_us16x08_meter_store *snd_us16x08_create_meter_store(void) |
| { |
| struct snd_us16x08_meter_store *tmp; |
| |
| tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); |
| if (!tmp) |
| return NULL; |
| tmp->comp_index = 1; |
| tmp->comp_active_index = 0; |
| return tmp; |
| } |
| |
| /* release elem->private_free as well; called only once for each *_store */ |
| static void elem_private_free(struct snd_kcontrol *kctl) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| |
| if (elem) |
| kfree(elem->private_data); |
| kfree(elem); |
| kctl->private_data = NULL; |
| } |
| |
| static int add_new_ctl(struct usb_mixer_interface *mixer, |
| const struct snd_kcontrol_new *ncontrol, |
| int index, int val_type, int channels, |
| const char *name, void *opt, |
| bool do_private_free, |
| struct usb_mixer_elem_info **elem_ret) |
| { |
| struct snd_kcontrol *kctl; |
| struct usb_mixer_elem_info *elem; |
| int err; |
| |
| usb_audio_dbg(mixer->chip, "us16x08 add mixer %s\n", name); |
| |
| elem = kzalloc(sizeof(*elem), GFP_KERNEL); |
| if (!elem) |
| return -ENOMEM; |
| |
| elem->head.mixer = mixer; |
| elem->head.resume = NULL; |
| elem->control = 0; |
| elem->idx_off = 0; |
| elem->head.id = index; |
| elem->val_type = val_type; |
| elem->channels = channels; |
| elem->private_data = opt; |
| |
| kctl = snd_ctl_new1(ncontrol, elem); |
| if (!kctl) { |
| kfree(elem); |
| return -ENOMEM; |
| } |
| |
| if (do_private_free) |
| kctl->private_free = elem_private_free; |
| else |
| kctl->private_free = snd_usb_mixer_elem_free; |
| |
| strlcpy(kctl->id.name, name, sizeof(kctl->id.name)); |
| |
| err = snd_usb_mixer_add_control(&elem->head, kctl); |
| if (err < 0) |
| return err; |
| |
| if (elem_ret) |
| *elem_ret = elem; |
| |
| return 0; |
| } |
| |
| /* table of EQ controls */ |
| static const struct snd_us16x08_control_params eq_controls[] = { |
| { /* EQ switch */ |
| .kcontrol_new = &snd_us16x08_eq_switch_ctl, |
| .control_id = SND_US16X08_ID_EQENABLE, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "EQ Switch", |
| }, |
| { /* EQ low gain */ |
| .kcontrol_new = &snd_us16x08_eq_gain_ctl, |
| .control_id = SND_US16X08_ID_EQLOWLEVEL, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ Low Volume", |
| }, |
| { /* EQ low freq */ |
| .kcontrol_new = &snd_us16x08_eq_low_freq_ctl, |
| .control_id = SND_US16X08_ID_EQLOWFREQ, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ Low Frequence", |
| }, |
| { /* EQ mid low gain */ |
| .kcontrol_new = &snd_us16x08_eq_gain_ctl, |
| .control_id = SND_US16X08_ID_EQLOWMIDLEVEL, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidLow Volume", |
| }, |
| { /* EQ mid low freq */ |
| .kcontrol_new = &snd_us16x08_eq_mid_freq_ctl, |
| .control_id = SND_US16X08_ID_EQLOWMIDFREQ, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidLow Frequence", |
| }, |
| { /* EQ mid low Q */ |
| .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, |
| .control_id = SND_US16X08_ID_EQLOWMIDWIDTH, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidLow Q", |
| }, |
| { /* EQ mid high gain */ |
| .kcontrol_new = &snd_us16x08_eq_gain_ctl, |
| .control_id = SND_US16X08_ID_EQHIGHMIDLEVEL, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidHigh Volume", |
| }, |
| { /* EQ mid high freq */ |
| .kcontrol_new = &snd_us16x08_eq_mid_freq_ctl, |
| .control_id = SND_US16X08_ID_EQHIGHMIDFREQ, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidHigh Frequence", |
| }, |
| { /* EQ mid high Q */ |
| .kcontrol_new = &snd_us16x08_eq_mid_width_ctl, |
| .control_id = SND_US16X08_ID_EQHIGHMIDWIDTH, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ MidHigh Q", |
| }, |
| { /* EQ high gain */ |
| .kcontrol_new = &snd_us16x08_eq_gain_ctl, |
| .control_id = SND_US16X08_ID_EQHIGHLEVEL, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ High Volume", |
| }, |
| { /* EQ low freq */ |
| .kcontrol_new = &snd_us16x08_eq_high_freq_ctl, |
| .control_id = SND_US16X08_ID_EQHIGHFREQ, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "EQ High Frequence", |
| }, |
| }; |
| |
| /* table of compressor controls */ |
| static const struct snd_us16x08_control_params comp_controls[] = { |
| { /* Comp enable */ |
| .kcontrol_new = &snd_us16x08_compswitch_ctl, |
| .control_id = SND_US16X08_ID_COMP_SWITCH, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "Compressor Switch", |
| }, |
| { /* Comp threshold */ |
| .kcontrol_new = &snd_us16x08_comp_threshold_ctl, |
| .control_id = SND_US16X08_ID_COMP_THRESHOLD, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Compressor Threshold Volume", |
| }, |
| { /* Comp ratio */ |
| .kcontrol_new = &snd_us16x08_comp_ratio_ctl, |
| .control_id = SND_US16X08_ID_COMP_RATIO, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Compressor Ratio", |
| }, |
| { /* Comp attack */ |
| .kcontrol_new = &snd_us16x08_comp_attack_ctl, |
| .control_id = SND_US16X08_ID_COMP_ATTACK, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Compressor Attack", |
| }, |
| { /* Comp release */ |
| .kcontrol_new = &snd_us16x08_comp_release_ctl, |
| .control_id = SND_US16X08_ID_COMP_RELEASE, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Compressor Release", |
| }, |
| { /* Comp gain */ |
| .kcontrol_new = &snd_us16x08_comp_gain_ctl, |
| .control_id = SND_US16X08_ID_COMP_GAIN, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Compressor Volume", |
| }, |
| }; |
| |
| /* table of channel controls */ |
| static const struct snd_us16x08_control_params channel_controls[] = { |
| { /* Phase */ |
| .kcontrol_new = &snd_us16x08_ch_boolean_ctl, |
| .control_id = SND_US16X08_ID_PHASE, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "Phase Switch", |
| .default_val = 0 |
| }, |
| { /* Fader */ |
| .kcontrol_new = &snd_us16x08_ch_int_ctl, |
| .control_id = SND_US16X08_ID_FADER, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Line Volume", |
| .default_val = 127 |
| }, |
| { /* Mute */ |
| .kcontrol_new = &snd_us16x08_ch_boolean_ctl, |
| .control_id = SND_US16X08_ID_MUTE, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "Mute Switch", |
| .default_val = 0 |
| }, |
| { /* Pan */ |
| .kcontrol_new = &snd_us16x08_pan_int_ctl, |
| .control_id = SND_US16X08_ID_PAN, |
| .type = USB_MIXER_U16, |
| .num_channels = 16, |
| .name = "Pan Left-Right Volume", |
| .default_val = 127 |
| }, |
| }; |
| |
| /* table of master controls */ |
| static const struct snd_us16x08_control_params master_controls[] = { |
| { /* Master */ |
| .kcontrol_new = &snd_us16x08_master_ctl, |
| .control_id = SND_US16X08_ID_FADER, |
| .type = USB_MIXER_U8, |
| .num_channels = 16, |
| .name = "Master Volume", |
| .default_val = 127 |
| }, |
| { /* Bypass */ |
| .kcontrol_new = &snd_us16x08_bus_ctl, |
| .control_id = SND_US16X08_ID_BYPASS, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "DSP Bypass Switch", |
| .default_val = 0 |
| }, |
| { /* Buss out */ |
| .kcontrol_new = &snd_us16x08_bus_ctl, |
| .control_id = SND_US16X08_ID_BUSS_OUT, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "Buss Out Switch", |
| .default_val = 0 |
| }, |
| { /* Master mute */ |
| .kcontrol_new = &snd_us16x08_bus_ctl, |
| .control_id = SND_US16X08_ID_MUTE, |
| .type = USB_MIXER_BOOLEAN, |
| .num_channels = 16, |
| .name = "Master Mute Switch", |
| .default_val = 0 |
| }, |
| |
| }; |
| |
| int snd_us16x08_controls_create(struct usb_mixer_interface *mixer) |
| { |
| int i, j; |
| int err; |
| struct usb_mixer_elem_info *elem; |
| struct snd_us16x08_comp_store *comp_store; |
| struct snd_us16x08_meter_store *meter_store; |
| struct snd_us16x08_eq_store *eq_store; |
| |
| /* just check for non-MIDI interface */ |
| if (mixer->hostif->desc.bInterfaceNumber == 3) { |
| |
| /* add routing control */ |
| err = add_new_ctl(mixer, &snd_us16x08_route_ctl, |
| SND_US16X08_ID_ROUTE, USB_MIXER_U8, 8, "Line Out Route", |
| NULL, false, &elem); |
| if (err < 0) { |
| usb_audio_dbg(mixer->chip, |
| "Failed to create route control, err:%d\n", |
| err); |
| return err; |
| } |
| for (i = 0; i < 8; i++) |
| elem->cache_val[i] = i < 2 ? i : i + 2; |
| elem->cached = 0xff; |
| |
| /* create compressor mixer elements */ |
| comp_store = snd_us16x08_create_comp_store(); |
| if (!comp_store) |
| return -ENOMEM; |
| |
| /* add master controls */ |
| for (i = 0; i < ARRAY_SIZE(master_controls); i++) { |
| |
| err = add_new_ctl(mixer, |
| master_controls[i].kcontrol_new, |
| master_controls[i].control_id, |
| master_controls[i].type, |
| master_controls[i].num_channels, |
| master_controls[i].name, |
| comp_store, |
| i == 0, /* release comp_store only once */ |
| &elem); |
| if (err < 0) |
| return err; |
| elem->cache_val[0] = master_controls[i].default_val; |
| elem->cached = 1; |
| } |
| |
| /* add channel controls */ |
| for (i = 0; i < ARRAY_SIZE(channel_controls); i++) { |
| |
| err = add_new_ctl(mixer, |
| channel_controls[i].kcontrol_new, |
| channel_controls[i].control_id, |
| channel_controls[i].type, |
| channel_controls[i].num_channels, |
| channel_controls[i].name, |
| comp_store, |
| false, &elem); |
| if (err < 0) |
| return err; |
| for (j = 0; j < SND_US16X08_MAX_CHANNELS; j++) { |
| elem->cache_val[j] = |
| channel_controls[i].default_val; |
| } |
| elem->cached = 0xffff; |
| } |
| |
| /* create eq store */ |
| eq_store = snd_us16x08_create_eq_store(); |
| if (!eq_store) |
| return -ENOMEM; |
| |
| /* add EQ controls */ |
| for (i = 0; i < ARRAY_SIZE(eq_controls); i++) { |
| |
| err = add_new_ctl(mixer, |
| eq_controls[i].kcontrol_new, |
| eq_controls[i].control_id, |
| eq_controls[i].type, |
| eq_controls[i].num_channels, |
| eq_controls[i].name, |
| eq_store, |
| i == 0, /* release eq_store only once */ |
| NULL); |
| if (err < 0) |
| return err; |
| } |
| |
| /* add compressor controls */ |
| for (i = 0; i < ARRAY_SIZE(comp_controls); i++) { |
| |
| err = add_new_ctl(mixer, |
| comp_controls[i].kcontrol_new, |
| comp_controls[i].control_id, |
| comp_controls[i].type, |
| comp_controls[i].num_channels, |
| comp_controls[i].name, |
| comp_store, |
| false, NULL); |
| if (err < 0) |
| return err; |
| } |
| |
| /* create meters store */ |
| meter_store = snd_us16x08_create_meter_store(); |
| if (!meter_store) |
| return -ENOMEM; |
| |
| /* meter function 'get' must access to compressor store |
| * so place a reference here |
| */ |
| meter_store->comp_store = comp_store; |
| err = add_new_ctl(mixer, &snd_us16x08_meter_ctl, |
| SND_US16X08_ID_METER, USB_MIXER_U16, 0, "Level Meter", |
| meter_store, true, NULL); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |