| // SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause |
| /* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #define MLXBF3_NGPIOS_GPIO0 32 |
| #define MLXBF3_MAX_GPIO_PINS 56 |
| |
| enum { |
| MLXBF3_GPIO_HW_MODE, |
| MLXBF3_GPIO_SW_MODE, |
| }; |
| |
| struct mlxbf3_pinctrl { |
| void __iomem *fw_ctrl_set0; |
| void __iomem *fw_ctrl_clr0; |
| void __iomem *fw_ctrl_set1; |
| void __iomem *fw_ctrl_clr1; |
| struct device *dev; |
| struct pinctrl_dev *pctl; |
| struct pinctrl_gpio_range gpio_range; |
| }; |
| |
| #define MLXBF3_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \ |
| { \ |
| .name = "mlxbf3_gpio_range", \ |
| .id = _id, \ |
| .base = _gpiobase, \ |
| .pin_base = _pinbase, \ |
| .npins = _npins, \ |
| } |
| |
| static struct pinctrl_gpio_range mlxbf3_pinctrl_gpio_ranges[] = { |
| MLXBF3_GPIO_RANGE(0, 0, 480, 32), |
| MLXBF3_GPIO_RANGE(1, 32, 456, 24), |
| }; |
| |
| static const struct pinctrl_pin_desc mlxbf3_pins[] = { |
| PINCTRL_PIN(0, "gpio0"), |
| PINCTRL_PIN(1, "gpio1"), |
| PINCTRL_PIN(2, "gpio2"), |
| PINCTRL_PIN(3, "gpio3"), |
| PINCTRL_PIN(4, "gpio4"), |
| PINCTRL_PIN(5, "gpio5"), |
| PINCTRL_PIN(6, "gpio6"), |
| PINCTRL_PIN(7, "gpio7"), |
| PINCTRL_PIN(8, "gpio8"), |
| PINCTRL_PIN(9, "gpio9"), |
| PINCTRL_PIN(10, "gpio10"), |
| PINCTRL_PIN(11, "gpio11"), |
| PINCTRL_PIN(12, "gpio12"), |
| PINCTRL_PIN(13, "gpio13"), |
| PINCTRL_PIN(14, "gpio14"), |
| PINCTRL_PIN(15, "gpio15"), |
| PINCTRL_PIN(16, "gpio16"), |
| PINCTRL_PIN(17, "gpio17"), |
| PINCTRL_PIN(18, "gpio18"), |
| PINCTRL_PIN(19, "gpio19"), |
| PINCTRL_PIN(20, "gpio20"), |
| PINCTRL_PIN(21, "gpio21"), |
| PINCTRL_PIN(22, "gpio22"), |
| PINCTRL_PIN(23, "gpio23"), |
| PINCTRL_PIN(24, "gpio24"), |
| PINCTRL_PIN(25, "gpio25"), |
| PINCTRL_PIN(26, "gpio26"), |
| PINCTRL_PIN(27, "gpio27"), |
| PINCTRL_PIN(28, "gpio28"), |
| PINCTRL_PIN(29, "gpio29"), |
| PINCTRL_PIN(30, "gpio30"), |
| PINCTRL_PIN(31, "gpio31"), |
| PINCTRL_PIN(32, "gpio32"), |
| PINCTRL_PIN(33, "gpio33"), |
| PINCTRL_PIN(34, "gpio34"), |
| PINCTRL_PIN(35, "gpio35"), |
| PINCTRL_PIN(36, "gpio36"), |
| PINCTRL_PIN(37, "gpio37"), |
| PINCTRL_PIN(38, "gpio38"), |
| PINCTRL_PIN(39, "gpio39"), |
| PINCTRL_PIN(40, "gpio40"), |
| PINCTRL_PIN(41, "gpio41"), |
| PINCTRL_PIN(42, "gpio42"), |
| PINCTRL_PIN(43, "gpio43"), |
| PINCTRL_PIN(44, "gpio44"), |
| PINCTRL_PIN(45, "gpio45"), |
| PINCTRL_PIN(46, "gpio46"), |
| PINCTRL_PIN(47, "gpio47"), |
| PINCTRL_PIN(48, "gpio48"), |
| PINCTRL_PIN(49, "gpio49"), |
| PINCTRL_PIN(50, "gpio50"), |
| PINCTRL_PIN(51, "gpio51"), |
| PINCTRL_PIN(52, "gpio52"), |
| PINCTRL_PIN(53, "gpio53"), |
| PINCTRL_PIN(54, "gpio54"), |
| PINCTRL_PIN(55, "gpio55"), |
| }; |
| |
| /* |
| * All single-pin functions can be mapped to any GPIO, however pinmux applies |
| * functions to pin groups and only those groups declared as supporting that |
| * function. To make this work we must put each pin in its own dummy group so |
| * that the functions can be described as applying to all pins. |
| * We use the same name as in the datasheet. |
| */ |
| static const char * const mlxbf3_pinctrl_single_group_names[] = { |
| "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", |
| "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", |
| "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23", |
| "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", |
| "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", |
| "gpio40", "gpio41", "gpio42", "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", |
| "gpio48", "gpio49", "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", |
| }; |
| |
| static int mlxbf3_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| /* Number single-pin groups */ |
| return MLXBF3_MAX_GPIO_PINS; |
| } |
| |
| static const char *mlxbf3_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| return mlxbf3_pinctrl_single_group_names[selector]; |
| } |
| |
| static int mlxbf3_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const unsigned int **pins, |
| unsigned int *num_pins) |
| { |
| /* return the dummy group for a single pin */ |
| *pins = &selector; |
| *num_pins = 1; |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops mlxbf3_pinctrl_group_ops = { |
| .get_groups_count = mlxbf3_get_groups_count, |
| .get_group_name = mlxbf3_get_group_name, |
| .get_group_pins = mlxbf3_get_group_pins, |
| }; |
| |
| /* |
| * Only 2 functions are supported and they apply to all pins: |
| * 1) Default hardware functionality |
| * 2) Software controlled GPIO |
| */ |
| static const char * const mlxbf3_gpiofunc_group_names[] = { "swctrl" }; |
| static const char * const mlxbf3_hwfunc_group_names[] = { "hwctrl" }; |
| |
| static struct pinfunction mlxbf3_pmx_funcs[] = { |
| PINCTRL_PINFUNCTION("hwfunc", mlxbf3_hwfunc_group_names, 1), |
| PINCTRL_PINFUNCTION("gpiofunc", mlxbf3_gpiofunc_group_names, 1), |
| }; |
| |
| static int mlxbf3_pmx_get_funcs_count(struct pinctrl_dev *pctldev) |
| { |
| return ARRAY_SIZE(mlxbf3_pmx_funcs); |
| } |
| |
| static const char *mlxbf3_pmx_get_func_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| return mlxbf3_pmx_funcs[selector].name; |
| } |
| |
| static int mlxbf3_pmx_get_groups(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const char * const **groups, |
| unsigned int * const num_groups) |
| { |
| *groups = mlxbf3_pmx_funcs[selector].groups; |
| *num_groups = MLXBF3_MAX_GPIO_PINS; |
| |
| return 0; |
| } |
| |
| static int mlxbf3_pmx_set(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned int group) |
| { |
| struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev); |
| |
| if (selector == MLXBF3_GPIO_HW_MODE) { |
| if (group < MLXBF3_NGPIOS_GPIO0) |
| writel(BIT(group), priv->fw_ctrl_clr0); |
| else |
| writel(BIT(group % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_clr1); |
| } |
| |
| if (selector == MLXBF3_GPIO_SW_MODE) { |
| if (group < MLXBF3_NGPIOS_GPIO0) |
| writel(BIT(group), priv->fw_ctrl_set0); |
| else |
| writel(BIT(group % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_set1); |
| } |
| |
| return 0; |
| } |
| |
| static int mlxbf3_gpio_request_enable(struct pinctrl_dev *pctldev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset) |
| { |
| struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev); |
| |
| if (offset < MLXBF3_NGPIOS_GPIO0) |
| writel(BIT(offset), priv->fw_ctrl_set0); |
| else |
| writel(BIT(offset % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_set1); |
| |
| return 0; |
| } |
| |
| static void mlxbf3_gpio_disable_free(struct pinctrl_dev *pctldev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset) |
| { |
| struct mlxbf3_pinctrl *priv = pinctrl_dev_get_drvdata(pctldev); |
| |
| /* disable GPIO functionality by giving control back to hardware */ |
| if (offset < MLXBF3_NGPIOS_GPIO0) |
| writel(BIT(offset), priv->fw_ctrl_clr0); |
| else |
| writel(BIT(offset % MLXBF3_NGPIOS_GPIO0), priv->fw_ctrl_clr1); |
| } |
| |
| static const struct pinmux_ops mlxbf3_pmx_ops = { |
| .get_functions_count = mlxbf3_pmx_get_funcs_count, |
| .get_function_name = mlxbf3_pmx_get_func_name, |
| .get_function_groups = mlxbf3_pmx_get_groups, |
| .set_mux = mlxbf3_pmx_set, |
| .gpio_request_enable = mlxbf3_gpio_request_enable, |
| .gpio_disable_free = mlxbf3_gpio_disable_free, |
| }; |
| |
| static struct pinctrl_desc mlxbf3_pin_desc = { |
| .name = "pinctrl-mlxbf3", |
| .pins = mlxbf3_pins, |
| .npins = ARRAY_SIZE(mlxbf3_pins), |
| .pctlops = &mlxbf3_pinctrl_group_ops, |
| .pmxops = &mlxbf3_pmx_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static_assert(ARRAY_SIZE(mlxbf3_pinctrl_single_group_names) == MLXBF3_MAX_GPIO_PINS); |
| |
| static int mlxbf3_pinctrl_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct mlxbf3_pinctrl *priv; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = &pdev->dev; |
| |
| priv->fw_ctrl_set0 = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->fw_ctrl_set0)) |
| return PTR_ERR(priv->fw_ctrl_set0); |
| |
| priv->fw_ctrl_clr0 = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(priv->fw_ctrl_set0)) |
| return PTR_ERR(priv->fw_ctrl_set0); |
| |
| priv->fw_ctrl_set1 = devm_platform_ioremap_resource(pdev, 2); |
| if (IS_ERR(priv->fw_ctrl_set0)) |
| return PTR_ERR(priv->fw_ctrl_set0); |
| |
| priv->fw_ctrl_clr1 = devm_platform_ioremap_resource(pdev, 3); |
| if (IS_ERR(priv->fw_ctrl_set0)) |
| return PTR_ERR(priv->fw_ctrl_set0); |
| |
| ret = devm_pinctrl_register_and_init(dev, |
| &mlxbf3_pin_desc, |
| priv, |
| &priv->pctl); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to register pinctrl\n"); |
| |
| ret = pinctrl_enable(priv->pctl); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to enable pinctrl\n"); |
| |
| pinctrl_add_gpio_ranges(priv->pctl, mlxbf3_pinctrl_gpio_ranges, 2); |
| |
| return 0; |
| } |
| |
| static const struct acpi_device_id mlxbf3_pinctrl_acpi_ids[] = { |
| { "MLNXBF34", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, mlxbf3_pinctrl_acpi_ids); |
| |
| static struct platform_driver mlxbf3_pinctrl_driver = { |
| .driver = { |
| .name = "pinctrl-mlxbf3", |
| .acpi_match_table = mlxbf3_pinctrl_acpi_ids, |
| }, |
| .probe = mlxbf3_pinctrl_probe, |
| }; |
| module_platform_driver(mlxbf3_pinctrl_driver); |
| |
| MODULE_DESCRIPTION("NVIDIA pinctrl driver"); |
| MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |