| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for Marvell Xenon SDHC as a platform device |
| * |
| * Copyright (C) 2016 Marvell, All Rights Reserved. |
| * |
| * Author: Hu Ziji <huziji@marvell.com> |
| * Date: 2016-8-24 |
| * |
| * Inspired by Jisheng Zhang <jszhang@marvell.com> |
| * Special thanks to Video BG4 project team. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/ktime.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "sdhci-pltfm.h" |
| #include "sdhci-xenon.h" |
| |
| static int xenon_enable_internal_clk(struct sdhci_host *host) |
| { |
| u32 reg; |
| ktime_t timeout; |
| |
| reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL); |
| reg |= SDHCI_CLOCK_INT_EN; |
| sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL); |
| /* Wait max 20 ms */ |
| timeout = ktime_add_ms(ktime_get(), 20); |
| while (1) { |
| bool timedout = ktime_after(ktime_get(), timeout); |
| |
| reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL); |
| if (reg & SDHCI_CLOCK_INT_STABLE) |
| break; |
| if (timedout) { |
| dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n"); |
| return -ETIMEDOUT; |
| } |
| usleep_range(900, 1100); |
| } |
| |
| return 0; |
| } |
| |
| /* Set SDCLK-off-while-idle */ |
| static void xenon_set_sdclk_off_idle(struct sdhci_host *host, |
| unsigned char sdhc_id, bool enable) |
| { |
| u32 reg; |
| u32 mask; |
| |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); |
| /* Get the bit shift basing on the SDHC index */ |
| mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id)); |
| if (enable) |
| reg |= mask; |
| else |
| reg &= ~mask; |
| |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); |
| } |
| |
| /* Enable/Disable the Auto Clock Gating function */ |
| static void xenon_set_acg(struct sdhci_host *host, bool enable) |
| { |
| u32 reg; |
| |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); |
| if (enable) |
| reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK; |
| else |
| reg |= XENON_AUTO_CLKGATE_DISABLE_MASK; |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); |
| } |
| |
| /* Enable this SDHC */ |
| static void xenon_enable_sdhc(struct sdhci_host *host, |
| unsigned char sdhc_id) |
| { |
| u32 reg; |
| |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); |
| reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); |
| |
| host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; |
| /* |
| * Force to clear BUS_TEST to |
| * skip bus_test_pre and bus_test_post |
| */ |
| host->mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST; |
| } |
| |
| /* Disable this SDHC */ |
| static void xenon_disable_sdhc(struct sdhci_host *host, |
| unsigned char sdhc_id) |
| { |
| u32 reg; |
| |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); |
| reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); |
| } |
| |
| /* Enable Parallel Transfer Mode */ |
| static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host, |
| unsigned char sdhc_id) |
| { |
| u32 reg; |
| |
| reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); |
| reg |= BIT(sdhc_id); |
| sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); |
| } |
| |
| /* Mask command conflict error */ |
| static void xenon_mask_cmd_conflict_err(struct sdhci_host *host) |
| { |
| u32 reg; |
| |
| reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); |
| reg |= XENON_MASK_CMD_CONFLICT_ERR; |
| sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); |
| } |
| |
| static void xenon_retune_setup(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u32 reg; |
| |
| /* Disable the Re-Tuning Request functionality */ |
| reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL); |
| reg &= ~XENON_RETUNING_COMPATIBLE; |
| sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL); |
| |
| /* Disable the Re-tuning Interrupt */ |
| reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); |
| reg &= ~SDHCI_INT_RETUNE; |
| sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE); |
| reg = sdhci_readl(host, SDHCI_INT_ENABLE); |
| reg &= ~SDHCI_INT_RETUNE; |
| sdhci_writel(host, reg, SDHCI_INT_ENABLE); |
| |
| /* Force to use Tuning Mode 1 */ |
| host->tuning_mode = SDHCI_TUNING_MODE_1; |
| /* Set re-tuning period */ |
| host->tuning_count = 1 << (priv->tuning_count - 1); |
| } |
| |
| /* |
| * Operations inside struct sdhci_ops |
| */ |
| /* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */ |
| static void xenon_reset_exit(struct sdhci_host *host, |
| unsigned char sdhc_id, u8 mask) |
| { |
| /* Only SOFTWARE RESET ALL will clear the register setting */ |
| if (!(mask & SDHCI_RESET_ALL)) |
| return; |
| |
| /* Disable tuning request and auto-retuning again */ |
| xenon_retune_setup(host); |
| |
| xenon_set_acg(host, true); |
| |
| xenon_set_sdclk_off_idle(host, sdhc_id, false); |
| |
| xenon_mask_cmd_conflict_err(host); |
| } |
| |
| static void xenon_reset(struct sdhci_host *host, u8 mask) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| |
| sdhci_reset(host, mask); |
| xenon_reset_exit(host, priv->sdhc_id, mask); |
| } |
| |
| /* |
| * Xenon defines different values for HS200 and HS400 |
| * in Host_Control_2 |
| */ |
| static void xenon_set_uhs_signaling(struct sdhci_host *host, |
| unsigned int timing) |
| { |
| u16 ctrl_2; |
| |
| ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| /* Select Bus Speed Mode for host */ |
| ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; |
| if (timing == MMC_TIMING_MMC_HS200) |
| ctrl_2 |= XENON_CTRL_HS200; |
| else if (timing == MMC_TIMING_UHS_SDR104) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR104; |
| else if (timing == MMC_TIMING_UHS_SDR12) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR12; |
| else if (timing == MMC_TIMING_UHS_SDR25) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR25; |
| else if (timing == MMC_TIMING_UHS_SDR50) |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR50; |
| else if ((timing == MMC_TIMING_UHS_DDR50) || |
| (timing == MMC_TIMING_MMC_DDR52)) |
| ctrl_2 |= SDHCI_CTRL_UHS_DDR50; |
| else if (timing == MMC_TIMING_MMC_HS400) |
| ctrl_2 |= XENON_CTRL_HS400; |
| sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); |
| } |
| |
| static void xenon_set_power(struct sdhci_host *host, unsigned char mode, |
| unsigned short vdd) |
| { |
| struct mmc_host *mmc = host->mmc; |
| u8 pwr = host->pwr; |
| |
| sdhci_set_power_noreg(host, mode, vdd); |
| |
| if (host->pwr == pwr) |
| return; |
| |
| if (host->pwr == 0) |
| vdd = 0; |
| |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); |
| } |
| |
| static void xenon_voltage_switch(struct sdhci_host *host) |
| { |
| /* Wait for 5ms after set 1.8V signal enable bit */ |
| usleep_range(5000, 5500); |
| |
| /* |
| * For some reason the controller's Host Control2 register reports |
| * the bit representing 1.8V signaling as 0 when read after it was |
| * written as 1. Subsequent read reports 1. |
| * |
| * Since this may cause some issues, do an empty read of the Host |
| * Control2 register here to circumvent this. |
| */ |
| sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| } |
| |
| static const struct sdhci_ops sdhci_xenon_ops = { |
| .voltage_switch = xenon_voltage_switch, |
| .set_clock = sdhci_set_clock, |
| .set_power = xenon_set_power, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = xenon_reset, |
| .set_uhs_signaling = xenon_set_uhs_signaling, |
| .get_max_clock = sdhci_pltfm_clk_get_max_clock, |
| }; |
| |
| static const struct sdhci_pltfm_data sdhci_xenon_pdata = { |
| .ops = &sdhci_xenon_ops, |
| .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | |
| SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | |
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, |
| }; |
| |
| /* |
| * Xenon Specific Operations in mmc_host_ops |
| */ |
| static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u32 reg; |
| |
| /* |
| * HS400/HS200/eMMC HS doesn't have Preset Value register. |
| * However, sdhci_set_ios will read HS400/HS200 Preset register. |
| * Disable Preset Value register for HS400/HS200. |
| * eMMC HS with preset_enabled set will trigger a bug in |
| * get_preset_value(). |
| */ |
| if ((ios->timing == MMC_TIMING_MMC_HS400) || |
| (ios->timing == MMC_TIMING_MMC_HS200) || |
| (ios->timing == MMC_TIMING_MMC_HS)) { |
| host->preset_enabled = false; |
| host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; |
| host->flags &= ~SDHCI_PV_ENABLED; |
| |
| reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); |
| reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; |
| sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); |
| } else { |
| host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN; |
| } |
| |
| sdhci_set_ios(mmc, ios); |
| xenon_phy_adj(host, ios); |
| |
| if (host->clock > XENON_DEFAULT_SDCLK_FREQ) |
| xenon_set_sdclk_off_idle(host, priv->sdhc_id, true); |
| } |
| |
| static int xenon_start_signal_voltage_switch(struct mmc_host *mmc, |
| struct mmc_ios *ios) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| |
| /* |
| * Before SD/SDIO set signal voltage, SD bus clock should be |
| * disabled. However, sdhci_set_clock will also disable the Internal |
| * clock in mmc_set_signal_voltage(). |
| * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated. |
| * Thus here manually enable internal clock. |
| * |
| * After switch completes, it is unnecessary to disable internal clock, |
| * since keeping internal clock active obeys SD spec. |
| */ |
| xenon_enable_internal_clk(host); |
| |
| xenon_soc_pad_ctrl(host, ios->signal_voltage); |
| |
| /* |
| * If Vqmmc is fixed on platform, vqmmc regulator should be unavailable. |
| * Thus SDHCI_CTRL_VDD_180 bit might not work then. |
| * Skip the standard voltage switch to avoid any issue. |
| */ |
| if (PTR_ERR(mmc->supply.vqmmc) == -ENODEV) |
| return 0; |
| |
| return sdhci_start_signal_voltage_switch(mmc, ios); |
| } |
| |
| /* |
| * Update card type. |
| * priv->init_card_type will be used in PHY timing adjustment. |
| */ |
| static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| |
| /* Update card type*/ |
| priv->init_card_type = card->type; |
| } |
| |
| static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| |
| if (host->timing == MMC_TIMING_UHS_DDR50 || |
| host->timing == MMC_TIMING_MMC_DDR52) |
| return 0; |
| |
| /* |
| * Currently force Xenon driver back to support mode 1 only, |
| * even though Xenon might claim to support mode 2 or mode 3. |
| * It requires more time to test mode 2/mode 3 on more platforms. |
| */ |
| if (host->tuning_mode != SDHCI_TUNING_MODE_1) |
| xenon_retune_setup(host); |
| |
| return sdhci_execute_tuning(mmc, opcode); |
| } |
| |
| static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable) |
| { |
| struct sdhci_host *host = mmc_priv(mmc); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u32 reg; |
| u8 sdhc_id = priv->sdhc_id; |
| |
| sdhci_enable_sdio_irq(mmc, enable); |
| |
| if (enable) { |
| /* |
| * Set SDIO Card Inserted indication |
| * to enable detecting SDIO async irq. |
| */ |
| reg = sdhci_readl(host, XENON_SYS_CFG_INFO); |
| reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); |
| sdhci_writel(host, reg, XENON_SYS_CFG_INFO); |
| } else { |
| /* Clear SDIO Card Inserted indication */ |
| reg = sdhci_readl(host, XENON_SYS_CFG_INFO); |
| reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); |
| sdhci_writel(host, reg, XENON_SYS_CFG_INFO); |
| } |
| } |
| |
| static void xenon_replace_mmc_host_ops(struct sdhci_host *host) |
| { |
| host->mmc_host_ops.set_ios = xenon_set_ios; |
| host->mmc_host_ops.start_signal_voltage_switch = |
| xenon_start_signal_voltage_switch; |
| host->mmc_host_ops.init_card = xenon_init_card; |
| host->mmc_host_ops.execute_tuning = xenon_execute_tuning; |
| host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq; |
| } |
| |
| /* |
| * Parse Xenon specific DT properties: |
| * sdhc-id: the index of current SDHC. |
| * Refer to XENON_SYS_CFG_INFO register |
| * tun-count: the interval between re-tuning |
| */ |
| static int xenon_probe_dt(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct mmc_host *mmc = host->mmc; |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u32 sdhc_id, nr_sdhc; |
| u32 tuning_count; |
| |
| /* Disable HS200 on Armada AP806 */ |
| if (of_device_is_compatible(np, "marvell,armada-ap806-sdhci")) |
| host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; |
| |
| sdhc_id = 0x0; |
| if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) { |
| nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO); |
| nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK; |
| if (unlikely(sdhc_id > nr_sdhc)) { |
| dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n", |
| sdhc_id, nr_sdhc); |
| return -EINVAL; |
| } |
| } |
| priv->sdhc_id = sdhc_id; |
| |
| tuning_count = XENON_DEF_TUNING_COUNT; |
| if (!of_property_read_u32(np, "marvell,xenon-tun-count", |
| &tuning_count)) { |
| if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) { |
| dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n", |
| XENON_DEF_TUNING_COUNT); |
| tuning_count = XENON_DEF_TUNING_COUNT; |
| } |
| } |
| priv->tuning_count = tuning_count; |
| |
| return xenon_phy_parse_dt(np, host); |
| } |
| |
| static int xenon_sdhc_prepare(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u8 sdhc_id = priv->sdhc_id; |
| |
| /* Enable SDHC */ |
| xenon_enable_sdhc(host, sdhc_id); |
| |
| /* Enable ACG */ |
| xenon_set_acg(host, true); |
| |
| /* Enable Parallel Transfer Mode */ |
| xenon_enable_sdhc_parallel_tran(host, sdhc_id); |
| |
| /* Disable SDCLK-Off-While-Idle before card init */ |
| xenon_set_sdclk_off_idle(host, sdhc_id, false); |
| |
| xenon_mask_cmd_conflict_err(host); |
| |
| return 0; |
| } |
| |
| static void xenon_sdhc_unprepare(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| u8 sdhc_id = priv->sdhc_id; |
| |
| /* disable SDHC */ |
| xenon_disable_sdhc(host, sdhc_id); |
| } |
| |
| static int xenon_probe(struct platform_device *pdev) |
| { |
| struct sdhci_pltfm_host *pltfm_host; |
| struct sdhci_host *host; |
| struct xenon_priv *priv; |
| int err; |
| |
| host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata, |
| sizeof(struct xenon_priv)); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| pltfm_host = sdhci_priv(host); |
| priv = sdhci_pltfm_priv(pltfm_host); |
| |
| /* |
| * Link Xenon specific mmc_host_ops function, |
| * to replace standard ones in sdhci_ops. |
| */ |
| xenon_replace_mmc_host_ops(host); |
| |
| pltfm_host->clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(pltfm_host->clk)) { |
| err = PTR_ERR(pltfm_host->clk); |
| dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err); |
| goto free_pltfm; |
| } |
| err = clk_prepare_enable(pltfm_host->clk); |
| if (err) |
| goto free_pltfm; |
| |
| priv->axi_clk = devm_clk_get(&pdev->dev, "axi"); |
| if (IS_ERR(priv->axi_clk)) { |
| err = PTR_ERR(priv->axi_clk); |
| if (err == -EPROBE_DEFER) |
| goto err_clk; |
| } else { |
| err = clk_prepare_enable(priv->axi_clk); |
| if (err) |
| goto err_clk; |
| } |
| |
| err = mmc_of_parse(host->mmc); |
| if (err) |
| goto err_clk_axi; |
| |
| sdhci_get_of_property(pdev); |
| |
| xenon_set_acg(host, false); |
| |
| /* Xenon specific dt parse */ |
| err = xenon_probe_dt(pdev); |
| if (err) |
| goto err_clk_axi; |
| |
| err = xenon_sdhc_prepare(host); |
| if (err) |
| goto err_clk_axi; |
| |
| pm_runtime_get_noresume(&pdev->dev); |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, 50); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| pm_suspend_ignore_children(&pdev->dev, 1); |
| |
| err = sdhci_add_host(host); |
| if (err) |
| goto remove_sdhc; |
| |
| pm_runtime_put_autosuspend(&pdev->dev); |
| |
| return 0; |
| |
| remove_sdhc: |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| xenon_sdhc_unprepare(host); |
| err_clk_axi: |
| clk_disable_unprepare(priv->axi_clk); |
| err_clk: |
| clk_disable_unprepare(pltfm_host->clk); |
| free_pltfm: |
| sdhci_pltfm_free(pdev); |
| return err; |
| } |
| |
| static int xenon_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| |
| pm_runtime_get_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| sdhci_remove_host(host, 0); |
| |
| xenon_sdhc_unprepare(host); |
| clk_disable_unprepare(priv->axi_clk); |
| clk_disable_unprepare(pltfm_host->clk); |
| |
| sdhci_pltfm_free(pdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int xenon_suspend(struct device *dev) |
| { |
| struct sdhci_host *host = dev_get_drvdata(dev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| int ret; |
| |
| ret = pm_runtime_force_suspend(dev); |
| |
| priv->restore_needed = true; |
| return ret; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM |
| static int xenon_runtime_suspend(struct device *dev) |
| { |
| struct sdhci_host *host = dev_get_drvdata(dev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| int ret; |
| |
| ret = sdhci_runtime_suspend_host(host); |
| if (ret) |
| return ret; |
| |
| if (host->tuning_mode != SDHCI_TUNING_MODE_3) |
| mmc_retune_needed(host->mmc); |
| |
| clk_disable_unprepare(pltfm_host->clk); |
| /* |
| * Need to update the priv->clock here, or when runtime resume |
| * back, phy don't aware the clock change and won't adjust phy |
| * which will cause cmd err |
| */ |
| priv->clock = 0; |
| return 0; |
| } |
| |
| static int xenon_runtime_resume(struct device *dev) |
| { |
| struct sdhci_host *host = dev_get_drvdata(dev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); |
| int ret; |
| |
| ret = clk_prepare_enable(pltfm_host->clk); |
| if (ret) { |
| dev_err(dev, "can't enable mainck\n"); |
| return ret; |
| } |
| |
| if (priv->restore_needed) { |
| ret = xenon_sdhc_prepare(host); |
| if (ret) |
| goto out; |
| priv->restore_needed = false; |
| } |
| |
| ret = sdhci_runtime_resume_host(host, 0); |
| if (ret) |
| goto out; |
| return 0; |
| out: |
| clk_disable_unprepare(pltfm_host->clk); |
| return ret; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(xenon_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(xenon_runtime_suspend, |
| xenon_runtime_resume, |
| NULL) |
| }; |
| |
| static const struct of_device_id sdhci_xenon_dt_ids[] = { |
| { .compatible = "marvell,armada-ap806-sdhci",}, |
| { .compatible = "marvell,armada-cp110-sdhci",}, |
| { .compatible = "marvell,armada-3700-sdhci",}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids); |
| |
| static struct platform_driver sdhci_xenon_driver = { |
| .driver = { |
| .name = "xenon-sdhci", |
| .of_match_table = sdhci_xenon_dt_ids, |
| .pm = &sdhci_xenon_dev_pm_ops, |
| }, |
| .probe = xenon_probe, |
| .remove = xenon_remove, |
| }; |
| |
| module_platform_driver(sdhci_xenon_driver); |
| |
| MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC"); |
| MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>"); |
| MODULE_LICENSE("GPL v2"); |