| /* |
| * linux/arch/arm/plat-omap/debug-leds.c |
| * |
| * Copyright 2003 by Texas Instruments Incorporated |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/io.h> |
| #include <linux/platform_data/gpio-omap.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/leds.h> |
| #include <asm/mach-types.h> |
| |
| #include <plat/fpga.h> |
| |
| |
| /* Many OMAP development platforms reuse the same "debug board"; these |
| * platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the |
| * debug board (all green), accessed through FPGA registers. |
| * |
| * The "surfer" expansion board and H2 sample board also have two-color |
| * green+red LEDs (in parallel), used here for timer and idle indicators |
| * in preference to the ones on the debug board, for a "Disco LED" effect. |
| * |
| * This driver exports either the original ARM LED API, the new generic |
| * one, or both. |
| */ |
| |
| static spinlock_t lock; |
| static struct h2p2_dbg_fpga __iomem *fpga; |
| static u16 led_state, hw_led_state; |
| |
| |
| #ifdef CONFIG_OMAP_DEBUG_LEDS |
| #define new_led_api() 1 |
| #else |
| #define new_led_api() 0 |
| #endif |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* original ARM debug LED API: |
| * - timer and idle leds (some boards use non-FPGA leds here); |
| * - up to 4 generic leds, easily accessed in-kernel (any context) |
| */ |
| |
| #define GPIO_LED_RED 3 |
| #define GPIO_LED_GREEN OMAP_MPUIO(4) |
| |
| #define LED_STATE_ENABLED 0x01 |
| #define LED_STATE_CLAIMED 0x02 |
| #define LED_TIMER_ON 0x04 |
| |
| #define GPIO_IDLE GPIO_LED_GREEN |
| #define GPIO_TIMER GPIO_LED_RED |
| |
| static void h2p2_dbg_leds_event(led_event_t evt) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lock, flags); |
| |
| if (!(led_state & LED_STATE_ENABLED) && evt != led_start) |
| goto done; |
| |
| switch (evt) { |
| case led_start: |
| if (fpga) |
| led_state |= LED_STATE_ENABLED; |
| break; |
| |
| case led_stop: |
| case led_halted: |
| /* all leds off during suspend or shutdown */ |
| |
| if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) { |
| gpio_set_value(GPIO_TIMER, 0); |
| gpio_set_value(GPIO_IDLE, 0); |
| } |
| |
| __raw_writew(~0, &fpga->leds); |
| led_state &= ~LED_STATE_ENABLED; |
| goto done; |
| |
| case led_claim: |
| led_state |= LED_STATE_CLAIMED; |
| hw_led_state = 0; |
| break; |
| |
| case led_release: |
| led_state &= ~LED_STATE_CLAIMED; |
| break; |
| |
| #ifdef CONFIG_LEDS_TIMER |
| case led_timer: |
| led_state ^= LED_TIMER_ON; |
| |
| if (machine_is_omap_perseus2() || machine_is_omap_h4()) |
| hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER; |
| else { |
| gpio_set_value(GPIO_TIMER, |
| led_state & LED_TIMER_ON); |
| goto done; |
| } |
| |
| break; |
| #endif |
| |
| #ifdef CONFIG_LEDS_CPU |
| /* LED lit iff busy */ |
| case led_idle_start: |
| if (machine_is_omap_perseus2() || machine_is_omap_h4()) |
| hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE; |
| else { |
| gpio_set_value(GPIO_IDLE, 1); |
| goto done; |
| } |
| |
| break; |
| |
| case led_idle_end: |
| if (machine_is_omap_perseus2() || machine_is_omap_h4()) |
| hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE; |
| else { |
| gpio_set_value(GPIO_IDLE, 0); |
| goto done; |
| } |
| |
| break; |
| #endif |
| |
| case led_green_on: |
| hw_led_state |= H2P2_DBG_FPGA_LED_GREEN; |
| break; |
| case led_green_off: |
| hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN; |
| break; |
| |
| case led_amber_on: |
| hw_led_state |= H2P2_DBG_FPGA_LED_AMBER; |
| break; |
| case led_amber_off: |
| hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER; |
| break; |
| |
| case led_red_on: |
| hw_led_state |= H2P2_DBG_FPGA_LED_RED; |
| break; |
| case led_red_off: |
| hw_led_state &= ~H2P2_DBG_FPGA_LED_RED; |
| break; |
| |
| case led_blue_on: |
| hw_led_state |= H2P2_DBG_FPGA_LED_BLUE; |
| break; |
| case led_blue_off: |
| hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE; |
| break; |
| |
| default: |
| break; |
| } |
| |
| |
| /* |
| * Actually burn the LEDs |
| */ |
| if (led_state & LED_STATE_ENABLED) |
| __raw_writew(~hw_led_state, &fpga->leds); |
| |
| done: |
| spin_unlock_irqrestore(&lock, flags); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* "new" LED API |
| * - with syfs access and generic triggering |
| * - not readily accessible to in-kernel drivers |
| */ |
| |
| struct dbg_led { |
| struct led_classdev cdev; |
| u16 mask; |
| }; |
| |
| static struct dbg_led dbg_leds[] = { |
| /* REVISIT at least H2 uses different timer & cpu leds... */ |
| #ifndef CONFIG_LEDS_TIMER |
| { .mask = 1 << 0, .cdev.name = "d4:green", |
| .cdev.default_trigger = "heartbeat", }, |
| #endif |
| #ifndef CONFIG_LEDS_CPU |
| { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */ |
| #endif |
| { .mask = 1 << 2, .cdev.name = "d6:green", }, |
| { .mask = 1 << 3, .cdev.name = "d7:green", }, |
| |
| { .mask = 1 << 4, .cdev.name = "d8:green", }, |
| { .mask = 1 << 5, .cdev.name = "d9:green", }, |
| { .mask = 1 << 6, .cdev.name = "d10:green", }, |
| { .mask = 1 << 7, .cdev.name = "d11:green", }, |
| |
| { .mask = 1 << 8, .cdev.name = "d12:green", }, |
| { .mask = 1 << 9, .cdev.name = "d13:green", }, |
| { .mask = 1 << 10, .cdev.name = "d14:green", }, |
| { .mask = 1 << 11, .cdev.name = "d15:green", }, |
| |
| #ifndef CONFIG_LEDS |
| { .mask = 1 << 12, .cdev.name = "d16:green", }, |
| { .mask = 1 << 13, .cdev.name = "d17:green", }, |
| { .mask = 1 << 14, .cdev.name = "d18:green", }, |
| { .mask = 1 << 15, .cdev.name = "d19:green", }, |
| #endif |
| }; |
| |
| static void |
| fpga_led_set(struct led_classdev *cdev, enum led_brightness value) |
| { |
| struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&lock, flags); |
| if (value == LED_OFF) |
| hw_led_state &= ~led->mask; |
| else |
| hw_led_state |= led->mask; |
| __raw_writew(~hw_led_state, &fpga->leds); |
| spin_unlock_irqrestore(&lock, flags); |
| } |
| |
| static void __init newled_init(struct device *dev) |
| { |
| unsigned i; |
| struct dbg_led *led; |
| int status; |
| |
| for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) { |
| led->cdev.brightness_set = fpga_led_set; |
| status = led_classdev_register(dev, &led->cdev); |
| if (status < 0) |
| break; |
| } |
| return; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int /* __init */ fpga_probe(struct platform_device *pdev) |
| { |
| struct resource *iomem; |
| |
| spin_lock_init(&lock); |
| |
| iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!iomem) |
| return -ENODEV; |
| |
| fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE); |
| __raw_writew(~0, &fpga->leds); |
| |
| #ifdef CONFIG_LEDS |
| leds_event = h2p2_dbg_leds_event; |
| leds_event(led_start); |
| #endif |
| |
| if (new_led_api()) { |
| newled_init(&pdev->dev); |
| } |
| |
| return 0; |
| } |
| |
| static int fpga_suspend_noirq(struct device *dev) |
| { |
| __raw_writew(~0, &fpga->leds); |
| return 0; |
| } |
| |
| static int fpga_resume_noirq(struct device *dev) |
| { |
| __raw_writew(~hw_led_state, &fpga->leds); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops fpga_dev_pm_ops = { |
| .suspend_noirq = fpga_suspend_noirq, |
| .resume_noirq = fpga_resume_noirq, |
| }; |
| |
| static struct platform_driver led_driver = { |
| .driver.name = "omap_dbg_led", |
| .driver.pm = &fpga_dev_pm_ops, |
| .probe = fpga_probe, |
| }; |
| |
| static int __init fpga_init(void) |
| { |
| if (machine_is_omap_h4() |
| || machine_is_omap_h3() |
| || machine_is_omap_h2() |
| || machine_is_omap_perseus2() |
| ) |
| return platform_driver_register(&led_driver); |
| return 0; |
| } |
| fs_initcall(fpga_init); |