| # SPDX-License-Identifier: GPL-2.0 |
| |
| config ARM_PTDUMP_CORE |
| def_bool n |
| |
| config ARM_PTDUMP_DEBUGFS |
| bool "Export kernel pagetable layout to userspace via debugfs" |
| depends on DEBUG_KERNEL |
| depends on MMU |
| select ARM_PTDUMP_CORE |
| select DEBUG_FS |
| help |
| Say Y here if you want to show the kernel pagetable layout in a |
| debugfs file. This information is only useful for kernel developers |
| who are working in architecture specific areas of the kernel. |
| It is probably not a good idea to enable this feature in a production |
| kernel. |
| If in doubt, say "N" |
| |
| config DEBUG_WX |
| bool "Warn on W+X mappings at boot" |
| depends on MMU |
| select ARM_PTDUMP_CORE |
| help |
| Generate a warning if any W+X mappings are found at boot. |
| |
| This is useful for discovering cases where the kernel is leaving |
| W+X mappings after applying NX, as such mappings are a security risk. |
| |
| Look for a message in dmesg output like this: |
| |
| arm/mm: Checked W+X mappings: passed, no W+X pages found. |
| |
| or like this, if the check failed: |
| |
| arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found. |
| |
| Note that even if the check fails, your kernel is possibly |
| still fine, as W+X mappings are not a security hole in |
| themselves, what they do is that they make the exploitation |
| of other unfixed kernel bugs easier. |
| |
| There is no runtime or memory usage effect of this option |
| once the kernel has booted up - it's a one time check. |
| |
| If in doubt, say "Y". |
| |
| choice |
| prompt "Choose kernel unwinder" |
| default UNWINDER_ARM if AEABI |
| default UNWINDER_FRAME_POINTER if !AEABI |
| help |
| This determines which method will be used for unwinding kernel stack |
| traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, |
| livepatch, lockdep, and more. |
| |
| config UNWINDER_FRAME_POINTER |
| bool "Frame pointer unwinder" |
| depends on !THUMB2_KERNEL |
| select ARCH_WANT_FRAME_POINTERS |
| select FRAME_POINTER |
| help |
| This option enables the frame pointer unwinder for unwinding |
| kernel stack traces. |
| |
| config UNWINDER_ARM |
| bool "ARM EABI stack unwinder" |
| depends on AEABI && !FUNCTION_GRAPH_TRACER |
| # https://github.com/ClangBuiltLinux/linux/issues/732 |
| depends on !LD_IS_LLD || LLD_VERSION >= 110000 |
| select ARM_UNWIND |
| help |
| This option enables stack unwinding support in the kernel |
| using the information automatically generated by the |
| compiler. The resulting kernel image is slightly bigger but |
| the performance is not affected. Currently, this feature |
| only works with EABI compilers. |
| |
| endchoice |
| |
| config ARM_UNWIND |
| bool |
| |
| config FRAME_POINTER |
| bool |
| |
| config DEBUG_USER |
| bool "Verbose user fault messages" |
| help |
| When a user program crashes due to an exception, the kernel can |
| print a brief message explaining what the problem was. This is |
| sometimes helpful for debugging but serves no purpose on a |
| production system. Most people should say N here. |
| |
| In addition, you need to pass user_debug=N on the kernel command |
| line to enable this feature. N consists of the sum of: |
| |
| 1 - undefined instruction events |
| 2 - system calls |
| 4 - invalid data aborts |
| 8 - SIGSEGV faults |
| 16 - SIGBUS faults |
| |
| # These options are only for real kernel hackers who want to get their hands dirty. |
| config DEBUG_LL |
| bool "Kernel low-level debugging functions (read help!)" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to include definitions of printascii, printch, printhex |
| in the kernel. This is helpful if you are debugging code that |
| executes before the console is initialized. |
| |
| Note that selecting this option will limit the kernel to a single |
| UART definition, as specified below. Attempting to boot the kernel |
| image on a different platform *will not work*, so this option should |
| not be enabled for kernels that are intended to be portable. |
| |
| choice |
| prompt "Kernel low-level debugging port" |
| depends on DEBUG_LL |
| |
| config DEBUG_ALPINE_UART0 |
| bool "Kernel low-level debugging messages via Alpine UART0" |
| depends on ARCH_ALPINE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Alpine based platforms. |
| |
| config DEBUG_ASM9260_UART |
| bool "Kernel low-level debugging via asm9260 UART" |
| depends on MACH_ASM9260 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to an UART or USART port on asm9260 based |
| machines. |
| |
| DEBUG_UART_PHYS | DEBUG_UART_VIRT |
| |
| 0x80000000 | 0xf0000000 | UART0 |
| 0x80004000 | 0xf0004000 | UART1 |
| 0x80008000 | 0xf0008000 | UART2 |
| 0x8000c000 | 0xf000c000 | UART3 |
| 0x80010000 | 0xf0010000 | UART4 |
| 0x80014000 | 0xf0014000 | UART5 |
| 0x80018000 | 0xf0018000 | UART6 |
| 0x8001c000 | 0xf001c000 | UART7 |
| 0x80020000 | 0xf0020000 | UART8 |
| 0x80024000 | 0xf0024000 | UART9 |
| |
| config DEBUG_AT91_RM9200_DBGU |
| bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU" |
| select DEBUG_AT91_UART |
| depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on the DBGU port of: |
| at91rm9200, at91sam9260, at91sam9g20, at91sam9261, |
| at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60 |
| |
| config DEBUG_AT91_SAM9263_DBGU |
| bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU" |
| select DEBUG_AT91_UART |
| depends on SOC_AT91SAM9 || SOC_SAMA5D3 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on the DBGU port of: |
| at91sam9263, at91sam9g45, at91sam9m10, |
| sama5d3 |
| |
| config DEBUG_AT91_SAMA5D2_UART1 |
| bool "Kernel low-level debugging on SAMA5D2 UART1" |
| select DEBUG_AT91_UART |
| depends on SOC_SAMA5D2 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on the UART1 port of sama5d2. |
| |
| config DEBUG_AT91_SAMA5D4_USART3 |
| bool "Kernel low-level debugging on SAMA5D4 USART3" |
| select DEBUG_AT91_UART |
| depends on SOC_SAMA5D4 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on the USART3 port of sama5d4. |
| |
| config DEBUG_AT91_SAMV7_USART1 |
| bool "Kernel low-level debugging via SAMV7 USART1" |
| select DEBUG_AT91_UART |
| depends on SOC_SAMV7 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the USART1 port on SAMV7 based |
| machines. |
| |
| config DEBUG_AT91_SAMA7G5_FLEXCOM3 |
| bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" |
| select DEBUG_AT91_UART |
| depends on SOC_SAMA7G5 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on the FLEXCOM3 port of SAMA7G5. |
| |
| config DEBUG_BCM2835 |
| bool "Kernel low-level debugging on BCM2835 PL011 UART" |
| depends on ARCH_BCM2835 && ARCH_MULTI_V6 |
| select DEBUG_UART_PL01X |
| |
| config DEBUG_BCM2836 |
| bool "Kernel low-level debugging on BCM2836 PL011 UART" |
| depends on ARCH_BCM2835 && ARCH_MULTI_V7 |
| select DEBUG_UART_PL01X |
| |
| config DEBUG_BCM_5301X |
| bool "Kernel low-level debugging on BCM5301X/NSP UART1" |
| depends on ARCH_BCM_5301X || ARCH_BCM_NSP |
| select DEBUG_UART_8250 |
| |
| config DEBUG_BCM_HR2 |
| bool "Kernel low-level debugging on Hurricane 2 UART2" |
| depends on ARCH_BCM_HR2 |
| select DEBUG_UART_8250 |
| |
| config DEBUG_BCM_IPROC_UART3 |
| bool "Kernel low-level debugging on BCM IPROC UART3" |
| depends on ARCH_BCM_CYGNUS |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the third serial port on these devices. |
| |
| config DEBUG_BCM_KONA_UART |
| bool "Kernel low-level debugging messages via BCM KONA UART" |
| depends on ARCH_BCM_MOBILE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Broadcom SoC platforms. |
| This low level debug works for Broadcom |
| mobile SoCs in the Kona family of chips (e.g. bcm28155, |
| bcm11351, etc...) |
| |
| config DEBUG_BCM63XX_UART |
| bool "Kernel low-level debugging on BCM63XX UART" |
| depends on ARCH_BCM_63XX |
| |
| config DEBUG_BERLIN_UART |
| bool "Marvell Berlin SoC Debug UART" |
| depends on ARCH_BERLIN |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Marvell Berlin SoC based platforms. |
| |
| config DEBUG_BRCMSTB_UART |
| bool "Use BRCMSTB UART for low-level debug" |
| depends on ARCH_BRCMSTB |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on these devices. The |
| UART physical and virtual address is automatically provided |
| based on the chip identification register value. |
| |
| If you have a Broadcom STB chip and would like early print |
| messages to appear over the UART, select this option. |
| |
| config DEBUG_CLPS711X_UART1 |
| bool "Kernel low-level debugging messages via UART1" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the first serial port on these devices. |
| |
| config DEBUG_CLPS711X_UART2 |
| bool "Kernel low-level debugging messages via UART2" |
| depends on ARCH_CLPS711X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the second serial port on these devices. |
| |
| config DEBUG_CNS3XXX |
| bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" |
| depends on ARCH_CNS3XXX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the CNS3xxx UART0. |
| |
| config DEBUG_DAVINCI_DA8XX_UART1 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART1" |
| depends on ARCH_DAVINCI_DA8XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DA8XX_UART2 |
| bool "Kernel low-level debugging on DaVinci DA8XX using UART2" |
| depends on ARCH_DAVINCI_DA8XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART2 serial port on DaVinci DA8XX devices. |
| |
| config DEBUG_DAVINCI_DMx_UART0 |
| bool "Kernel low-level debugging on DaVinci DMx using UART0" |
| depends on ARCH_DAVINCI_DMx |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on DaVinci DMx devices. |
| |
| config DEBUG_DC21285_PORT |
| bool "Kernel low-level debugging messages via footbridge serial port" |
| depends on FOOTBRIDGE |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port in the DC21285 (Footbridge). |
| |
| config DEBUG_DIGICOLOR_UA0 |
| bool "Kernel low-level debugging messages via Digicolor UA0" |
| depends on ARCH_DIGICOLOR |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the UA0 serial port in the CX92755. |
| |
| config DEBUG_EP93XX |
| bool "Kernel low-level debugging messages via ep93xx UART" |
| depends on ARCH_EP93XX |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Cirrus Logic EP93xx based platforms. |
| |
| config DEBUG_FOOTBRIDGE_COM1 |
| bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" |
| depends on FOOTBRIDGE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the 8250 at PCI COM1. |
| |
| config DEBUG_GEMINI |
| bool "Kernel low-level debugging messages via Cortina Systems Gemini UART" |
| depends on ARCH_GEMINI |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Cortina Gemini based platforms. |
| |
| config DEBUG_HI3620_UART |
| bool "Hisilicon HI3620 Debug UART" |
| depends on ARCH_HI3xxx |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on HI3620 UART. |
| |
| config DEBUG_HIGHBANK_UART |
| bool "Kernel low-level debugging messages via Highbank UART" |
| depends on ARCH_HIGHBANK |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the UART on Highbank based devices. |
| |
| config DEBUG_HIP01_UART |
| bool "Hisilicon Hip01 Debug UART" |
| depends on ARCH_HIP01 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on HIP01 UART. |
| |
| config DEBUG_HIP04_UART |
| bool "Hisilicon HiP04 Debug UART" |
| depends on ARCH_HIP04 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on HIP04 UART. |
| |
| config DEBUG_HIX5HD2_UART |
| bool "Hisilicon Hix5hd2 Debug UART" |
| depends on ARCH_HIX5HD2 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Hix5hd2 UART. |
| |
| config DEBUG_IMX1_UART |
| bool "i.MX1 Debug UART" |
| depends on SOC_IMX1 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX1. |
| |
| config DEBUG_IMX23_UART |
| bool "i.MX23 Debug UART" |
| depends on SOC_IMX23 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX23. |
| |
| config DEBUG_IMX25_UART |
| bool "i.MX25 Debug UART" |
| depends on SOC_IMX25 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX25. |
| |
| config DEBUG_IMX21_IMX27_UART |
| bool "i.MX21 and i.MX27 Debug UART" |
| depends on SOC_IMX21 || SOC_IMX27 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX21 or i.MX27. |
| |
| config DEBUG_IMX28_UART |
| bool "i.MX28 Debug UART" |
| depends on SOC_IMX28 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX28. |
| |
| config DEBUG_IMX31_UART |
| bool "i.MX31 Debug UART" |
| depends on SOC_IMX31 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX31. |
| |
| config DEBUG_IMX35_UART |
| bool "i.MX35 Debug UART" |
| depends on SOC_IMX35 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX35. |
| |
| config DEBUG_IMX50_UART |
| bool "i.MX50 Debug UART" |
| depends on SOC_IMX50 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX50. |
| |
| config DEBUG_IMX51_UART |
| bool "i.MX51 Debug UART" |
| depends on SOC_IMX51 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX51. |
| |
| config DEBUG_IMX53_UART |
| bool "i.MX53 Debug UART" |
| depends on SOC_IMX53 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX53. |
| |
| config DEBUG_IMX6Q_UART |
| bool "i.MX6Q/DL Debug UART" |
| depends on SOC_IMX6Q |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6Q/DL. |
| |
| config DEBUG_IMX6SL_UART |
| bool "i.MX6SL Debug UART" |
| depends on SOC_IMX6SL |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6SL. |
| |
| config DEBUG_IMX6SX_UART |
| bool "i.MX6SX Debug UART" |
| depends on SOC_IMX6SX |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6SX. |
| |
| config DEBUG_IMX6UL_UART |
| bool "i.MX6UL Debug UART" |
| depends on SOC_IMX6UL |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX6UL. |
| |
| config DEBUG_IMX7D_UART |
| bool "i.MX7D Debug UART" |
| depends on SOC_IMX7D |
| help |
| Say Y here if you want kernel low-level debugging support |
| on i.MX7D. |
| |
| config DEBUG_INTEGRATOR |
| bool "Kernel low-level debugging messages via ARM Integrator UART" |
| depends on ARCH_INTEGRATOR |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on ARM Integrator platforms. |
| |
| config DEBUG_KEYSTONE_UART0 |
| bool "Kernel low-level debugging on KEYSTONE2 using UART0" |
| depends on ARCH_KEYSTONE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 serial port on KEYSTONE2 devices. |
| |
| config DEBUG_KEYSTONE_UART1 |
| bool "Kernel low-level debugging on KEYSTONE2 using UART1" |
| depends on ARCH_KEYSTONE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 serial port on KEYSTONE2 devices. |
| |
| config DEBUG_LPC18XX_UART0 |
| bool "Kernel low-level debugging via LPC18xx/43xx UART0" |
| depends on ARCH_LPC18XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on NXP LPC18xx/43xx UART0. |
| |
| config DEBUG_LPC32XX |
| bool "Kernel low-level debugging messages via NXP LPC32xx UART" |
| depends on ARCH_LPC32XX |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on NXP LPC32xx based platforms. |
| |
| config DEBUG_MESON_UARTAO |
| bool "Kernel low-level debugging via Meson6 UARTAO" |
| depends on ARCH_MESON |
| help |
| Say Y here if you want kernel low-lever debugging support |
| on Amlogic Meson6 based platforms on the UARTAO. |
| |
| config DEBUG_MMP_UART2 |
| bool "Kernel low-level debugging message via MMP UART2" |
| depends on ARCH_MMP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART2. |
| |
| config DEBUG_MMP_UART3 |
| bool "Kernel low-level debugging message via MMP UART3" |
| depends on ARCH_MMP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MMP UART3. |
| |
| config DEBUG_MVEBU_UART0 |
| bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" |
| depends on ARCH_MVEBU |
| depends on ARCH_MVEBU && CPU_V7 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms on UART0. |
| |
| This option should be used with the old bootloaders |
| that left the internal registers mapped at |
| 0xd0000000. As of today, this is the case on |
| platforms such as the Globalscale Mirabox or the |
| Plathome OpenBlocks AX3, when using the original |
| bootloader. |
| |
| This option will not work on older Marvell platforms |
| (Kirkwood, Dove, MV78xx0, Orion5x), which should pick |
| the "new bootloader" variant. |
| |
| If the wrong DEBUG_MVEBU_UART* option is selected, |
| when u-boot hands over to the kernel, the system |
| silently crashes, with no serial output at all. |
| |
| config DEBUG_MVEBU_UART0_ALTERNATE |
| bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" |
| depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms on UART0. (Armada XP, Armada 3xx, |
| Kirkwood, Dove, MV78xx0, Orion5x). |
| |
| |
| This option should be used with the new bootloaders |
| that remap the internal registers at 0xf1000000. |
| |
| If the wrong DEBUG_MVEBU_UART* option is selected, |
| when u-boot hands over to the kernel, the system |
| silently crashes, with no serial output at all. |
| |
| config DEBUG_MVEBU_UART1_ALTERNATE |
| bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" |
| depends on ARCH_MVEBU |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on MVEBU based platforms on UART1. (Armada XP, Armada 3xx, |
| Kirkwood, Dove, MV78xx0, Orion5x). |
| |
| This option should be used with the new bootloaders |
| that remap the internal registers at 0xf1000000. |
| All of the older (pre Armada XP/370) platforms also use |
| this address, regardless of the boot loader version. |
| |
| If the wrong DEBUG_MVEBU_UART* option is selected, |
| when u-boot hands over to the kernel, the system |
| silently crashes, with no serial output at all. |
| |
| config DEBUG_MSTARV7_PMUART |
| bool "Kernel low-level debugging messages via MSTARV7 PM UART" |
| depends on ARCH_MSTARV7 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| for MSTAR ARMv7-based platforms on PM UART. |
| |
| config DEBUG_MT6589_UART0 |
| bool "Mediatek mt6589 UART0" |
| depends on ARCH_MEDIATEK |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| for Mediatek mt6589 based platforms on UART0. |
| |
| config DEBUG_MT8127_UART0 |
| bool "Mediatek mt8127/mt6592 UART0" |
| depends on ARCH_MEDIATEK |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| for Mediatek mt8127 based platforms on UART0. |
| |
| config DEBUG_MT8135_UART3 |
| bool "Mediatek mt8135 UART3" |
| depends on ARCH_MEDIATEK |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| for Mediatek mt8135 based platforms on UART3. |
| |
| config DEBUG_NOMADIK_UART |
| bool "Kernel low-level debugging messages via NOMADIK UART" |
| depends on ARCH_NOMADIK |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on NOMADIK based platforms. |
| |
| config DEBUG_NSPIRE_CLASSIC_UART |
| bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" |
| depends on ARCH_NSPIRE |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on TI-NSPIRE classic models. |
| |
| config DEBUG_NSPIRE_CX_UART |
| bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" |
| depends on ARCH_NSPIRE |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on TI-NSPIRE CX models. |
| |
| config DEBUG_OMAP1UART1 |
| bool "Kernel low-level debugging via OMAP1 UART1" |
| depends on ARCH_OMAP1 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP1 based platforms (except OMAP730) on the UART1. |
| |
| config DEBUG_OMAP1UART2 |
| bool "Kernel low-level debugging via OMAP1 UART2" |
| depends on ARCH_OMAP1 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP1 based platforms (except OMAP730) on the UART2. |
| |
| config DEBUG_OMAP1UART3 |
| bool "Kernel low-level debugging via OMAP1 UART3" |
| depends on ARCH_OMAP1 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP1 based platforms (except OMAP730) on the UART3. |
| |
| config DEBUG_OMAP2UART1 |
| bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| help |
| This covers at least h4, 2430sdp, 3430sdp, 3630sdp, |
| omap3 torpedo and 3530 lv som. |
| |
| config DEBUG_OMAP2UART2 |
| bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_OMAP2UART3 |
| bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_OMAP3UART3 |
| bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| help |
| This covers at least cm_t3x, beagle, crane, devkit8000, |
| igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, |
| and 3517evm. |
| |
| config DEBUG_OMAP4UART3 |
| bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_OMAP3UART4 |
| bool "Kernel low-level debugging messages via OMAP36XX UART4" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_OMAP4UART4 |
| bool "Kernel low-level debugging messages via OMAP4/5 UART4" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_OMAP7XXUART1 |
| bool "Kernel low-level debugging via OMAP730 UART1" |
| depends on ARCH_OMAP730 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP730 based platforms on the UART1. |
| |
| config DEBUG_OMAP7XXUART2 |
| bool "Kernel low-level debugging via OMAP730 UART2" |
| depends on ARCH_OMAP730 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP730 based platforms on the UART2. |
| |
| config DEBUG_OMAP7XXUART3 |
| bool "Kernel low-level debugging via OMAP730 UART3" |
| depends on ARCH_OMAP730 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on OMAP730 based platforms on the UART3. |
| |
| config DEBUG_TI81XXUART1 |
| bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_TI81XXUART2 |
| bool "Kernel low-level debugging messages via TI81XX UART2" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_TI81XXUART3 |
| bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_AM33XXUART1 |
| bool "Kernel low-level debugging messages via AM33XX UART1" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_UART_8250 |
| |
| config DEBUG_ZOOM_UART |
| bool "Kernel low-level debugging messages via Zoom2/3 UART" |
| depends on ARCH_OMAP2PLUS |
| select DEBUG_OMAP2PLUS_UART |
| |
| config DEBUG_PXA_UART1 |
| depends on ARCH_PXA |
| bool "Use PXA UART1 for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on PXA UART1. |
| |
| config DEBUG_QCOM_UARTDM |
| bool "Kernel low-level debugging messages via QCOM UARTDM" |
| depends on ARCH_QCOM |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on Qualcomm devices. |
| |
| ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT |
| APQ8064 0x16640000 0xf0040000 |
| APQ8084 0xf995e000 0xfa75e000 |
| IPQ4019 0x078af000 0xf78af000 |
| MSM8X60 0x19c40000 0xf0040000 |
| MSM8960 0x16440000 0xf0040000 |
| MSM8974 0xf991e000 0xfa71e000 |
| |
| Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration |
| options based on your needs. |
| |
| config DEBUG_REALVIEW_STD_PORT |
| bool "RealView Default UART" |
| depends on ARCH_REALVIEW |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the serial port on RealView EB, PB11MP, PBA8 |
| and PBX platforms. |
| |
| config DEBUG_REALVIEW_PB1176_PORT |
| bool "RealView PB1176 UART" |
| depends on MACH_REALVIEW_PB1176 |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the standard serial port on the RealView |
| PB1176 platform. |
| |
| config DEBUG_RV1108_UART0 |
| bool "Kernel low-level debugging messages via Rockchip RV1108 UART0" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip RV1108 based platforms. |
| |
| config DEBUG_RV1108_UART1 |
| bool "Kernel low-level debugging messages via Rockchip RV1108 UART1" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip RV1108 based platforms. |
| |
| config DEBUG_RV1108_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RV1108 UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip RV1108 based platforms. |
| |
| config DEBUG_RK29_UART0 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART0" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK29_UART1 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART1" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK29_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RK29 UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART0 |
| bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART1 |
| bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK3X_UART3 |
| bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip based platforms. |
| |
| config DEBUG_RK32_UART2 |
| bool "Kernel low-level debugging messages via Rockchip RK32 UART2" |
| depends on ARCH_ROCKCHIP |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Rockchip RK32xx based platforms. |
| |
| config DEBUG_R7S72100_SCIF2 |
| bool "Kernel low-level debugging messages via SCIF2 on R7S72100" |
| depends on ARCH_R7S72100 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF2 on Renesas RZ/A1H (R7S72100). |
| |
| config DEBUG_R7S9210_SCIF2 |
| bool "Kernel low-level debugging messages via SCIF2 on R7S9210" |
| depends on ARCH_R7S9210 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF2 on Renesas RZ/A2M (R7S9210). |
| |
| config DEBUG_R7S9210_SCIF4 |
| bool "Kernel low-level debugging messages via SCIF4 on R7S9210" |
| depends on ARCH_R7S9210 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF4 on Renesas RZ/A2M (R7S9210). |
| |
| config DEBUG_RCAR_GEN1_SCIF0 |
| bool "Kernel low-level debugging messages via SCIF0 on R8A7778" |
| depends on ARCH_R8A7778 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF0 on Renesas R-Car M1A (R8A7778). |
| |
| config DEBUG_RCAR_GEN1_SCIF2 |
| bool "Kernel low-level debugging messages via SCIF2 on R8A7779" |
| depends on ARCH_R8A7779 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF2 on Renesas R-Car H1 (R8A7779). |
| |
| config DEBUG_RCAR_GEN2_SCIF0 |
| bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1" |
| depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \ |
| ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744), |
| R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or |
| M2-N (R8A7793). |
| |
| config DEBUG_RCAR_GEN2_SCIF1 |
| bool "Kernel low-level debugging messages via SCIF1 on R8A77470" |
| depends on ARCH_R8A77470 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF1 on Renesas RZ/G1C (R8A77470). |
| |
| config DEBUG_RCAR_GEN2_SCIF2 |
| bool "Kernel low-level debugging messages via SCIF2 on R8A7794" |
| depends on ARCH_R8A7794 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF2 on Renesas R-Car E2 (R8A7794). |
| |
| config DEBUG_RCAR_GEN2_SCIF4 |
| bool "Kernel low-level debugging messages via SCIF4 on R8A7745" |
| depends on ARCH_R8A7745 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIF4 on Renesas RZ/G1E (R8A7745). |
| |
| config DEBUG_RCAR_GEN2_SCIFA2 |
| bool "Kernel low-level debugging messages via SCIFA2 on R8A7742" |
| depends on ARCH_R8A7742 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIFA2 on Renesas RZ/G1H (R8A7742). |
| |
| config DEBUG_RMOBILE_SCIFA0 |
| bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" |
| depends on ARCH_R8A73A4 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4). |
| |
| config DEBUG_RMOBILE_SCIFA1 |
| bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" |
| depends on ARCH_R8A7740 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIFA1 on Renesas R-Mobile A1 (R8A7740). |
| |
| config DEBUG_RMOBILE_SCIFA4 |
| bool "Kernel low-level debugging messages via SCIFA4 on SH73A0" |
| depends on ARCH_SH73A0 |
| help |
| Say Y here if you want kernel low-level debugging support |
| via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). |
| |
| config DEBUG_S3C_UART0 |
| depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| select DEBUG_S3C24XX_UART if ARCH_S3C24XX |
| select DEBUG_S3C64XX_UART if ARCH_S3C64XX |
| select DEBUG_S5PV210_UART if ARCH_S5PV210 |
| bool "Use Samsung S3C UART 0 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 0. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C_UART1 |
| depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| select DEBUG_S3C24XX_UART if ARCH_S3C24XX |
| select DEBUG_S3C64XX_UART if ARCH_S3C64XX |
| select DEBUG_S5PV210_UART if ARCH_S5PV210 |
| bool "Use Samsung S3C UART 1 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 1. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C_UART2 |
| depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| select DEBUG_S3C24XX_UART if ARCH_S3C24XX |
| select DEBUG_S3C64XX_UART if ARCH_S3C64XX |
| select DEBUG_S5PV210_UART if ARCH_S5PV210 |
| bool "Use Samsung S3C UART 2 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 2. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C_UART3 |
| depends on ARCH_EXYNOS || ARCH_S5PV210 |
| select DEBUG_EXYNOS_UART if ARCH_EXYNOS |
| select DEBUG_S3C64XX_UART if ARCH_S3C64XX |
| select DEBUG_S5PV210_UART if ARCH_S5PV210 |
| bool "Use Samsung S3C UART 3 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 3. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C2410_UART0 |
| depends on ARCH_S3C24XX |
| select DEBUG_S3C2410_UART |
| bool "Use S3C2410/S3C2412 UART 0 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 0. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C2410_UART1 |
| depends on ARCH_S3C24XX |
| select DEBUG_S3C2410_UART |
| bool "Use S3C2410/S3C2412 UART 1 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 1. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_S3C2410_UART2 |
| depends on ARCH_S3C24XX |
| select DEBUG_S3C2410_UART |
| bool "Use S3C2410/S3C2412 UART 2 for low-level debug" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART 2. The port must have been initialised |
| by the boot-loader before use. |
| |
| config DEBUG_SA1100 |
| depends on ARCH_SA1100 |
| bool "Use SA1100 UARTs for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SA-11x0 UART ports. The kernel will check for the first |
| enabled UART in a sequence 3-1-2. |
| |
| config DEBUG_SD5203_UART |
| bool "Hisilicon SD5203 Debug UART" |
| depends on ARCH_SD5203 |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SD5203 UART. |
| |
| config DEBUG_SOCFPGA_UART0 |
| depends on ARCH_INTEL_SOCFPGA |
| bool "Use SOCFPGA UART0 for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SOCFPGA(Cyclone 5 and Arria 5) based platforms. |
| |
| config DEBUG_SOCFPGA_ARRIA10_UART1 |
| depends on ARCH_INTEL_SOCFPGA |
| bool "Use SOCFPGA Arria10 UART1 for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SOCFPGA(Arria 10) based platforms. |
| |
| config DEBUG_SOCFPGA_CYCLONE5_UART1 |
| depends on ARCH_INTEL_SOCFPGA |
| bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on SOCFPGA(Cyclone 5 and Arria 5) based platforms. |
| |
| config DEBUG_SUN9I_UART0 |
| bool "Kernel low-level debugging messages via sun9i UART0" |
| depends on MACH_SUN9I |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A80 based platforms on the UART0. |
| |
| config DEBUG_SUNXI_UART0 |
| bool "Kernel low-level debugging messages via sunXi UART0" |
| depends on ARCH_SUNXI |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART0. |
| |
| config DEBUG_SUNXI_UART1 |
| bool "Kernel low-level debugging messages via sunXi UART1" |
| depends on ARCH_SUNXI |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A1X based platforms on the UART1. |
| |
| config DEBUG_SUNXI_R_UART |
| bool "Kernel low-level debugging messages via sunXi R_UART" |
| depends on MACH_SUN6I || MACH_SUN8I |
| select DEBUG_UART_8250 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Allwinner A31/A23 based platforms on the R_UART. |
| |
| config DEBUG_SPEAR3XX |
| bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" |
| depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on ST SPEAr based platforms. |
| |
| config DEBUG_SPEAR13XX |
| bool "Kernel low-level debugging messages via ST SPEAr 13xx UART" |
| depends on ARCH_SPEAR13XX |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on ST SPEAr13xx based platforms. |
| |
| config DEBUG_STIH41X_ASC2 |
| bool "Use StiH415/416 ASC2 UART for low-level debug" |
| depends on ARCH_STI |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STiH415/416 based platforms like b2000, which has |
| default UART wired up to ASC2. |
| |
| If unsure, say N. |
| |
| config DEBUG_STIH41X_SBC_ASC1 |
| bool "Use StiH415/416 SBC ASC1 UART for low-level debug" |
| depends on ARCH_STI |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STiH415/416 based platforms like b2020. which has |
| default UART wired up to SBC ASC1. |
| |
| If unsure, say N. |
| |
| config DEBUG_STIH418_SBC_ASC0 |
| bool "Use StiH418 SBC ASC0 UART for low-level debug" |
| depends on ARCH_STI |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STiH418 based platforms which has default UART wired |
| up to SBC ASC0. |
| |
| If unsure, say N. |
| |
| config STM32F4_DEBUG_UART |
| bool "Use STM32F4 UART for low-level debug" |
| depends on MACH_STM32F429 || MACH_STM32F469 |
| select DEBUG_STM32_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STM32F4 based platforms, which default UART is wired on |
| USART1, but another UART instance can be selected by modifying |
| CONFIG_DEBUG_UART_PHYS. |
| |
| If unsure, say N. |
| |
| config STM32F7_DEBUG_UART |
| bool "Use STM32F7 UART for low-level debug" |
| depends on MACH_STM32F746 || MACH_STM32F769 |
| select DEBUG_STM32_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STM32F7 based platforms, which default UART is wired on |
| USART1, but another UART instance can be selected by modifying |
| CONFIG_DEBUG_UART_PHYS. |
| |
| If unsure, say N. |
| |
| config STM32H7_DEBUG_UART |
| bool "Use STM32H7 UART for low-level debug" |
| depends on MACH_STM32H743 |
| select DEBUG_STM32_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STM32H7 based platforms, which default UART is wired on |
| USART1, but another UART instance can be selected by modifying |
| CONFIG_DEBUG_UART_PHYS. |
| |
| If unsure, say N. |
| |
| config STM32MP1_DEBUG_UART |
| bool "Use STM32MP1 UART for low-level debug" |
| depends on MACH_STM32MP157 |
| select DEBUG_STM32_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on STM32MP1 based platforms, wich default UART is wired on |
| UART4, but another UART instance can be selected by modifying |
| CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. |
| |
| If unsure, say N. |
| |
| config TEGRA_DEBUG_UART_AUTO_ODMDATA |
| bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Automatically determines which UART to use for low-level |
| debug based on the ODMDATA value. This value is part of |
| the BCT, and is written to the boot memory device using |
| nvflash, or other flashing tool. When bits 19:18 are 3, |
| then bits 17:15 indicate which UART to use; 0/1/2/3/4 |
| are UART A/B/C/D/E. |
| |
| config TEGRA_DEBUG_UARTA |
| bool "Kernel low-level debugging messages via Tegra UART A" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTB |
| bool "Kernel low-level debugging messages via Tegra UART B" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTC |
| bool "Kernel low-level debugging messages via Tegra UART C" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTD |
| bool "Kernel low-level debugging messages via Tegra UART D" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config TEGRA_DEBUG_UARTE |
| bool "Kernel low-level debugging messages via Tegra UART E" |
| depends on ARCH_TEGRA |
| select DEBUG_TEGRA_UART |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Tegra based platforms. |
| |
| config DEBUG_UX500_UART |
| depends on ARCH_U8500 |
| bool "Use Ux500 UART for low-level debug" |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Ux500 based platforms. |
| |
| config DEBUG_VERSATILE |
| bool "Kernel low-level debugging messages via ARM Versatile UART" |
| depends on ARCH_VERSATILE |
| select DEBUG_UART_PL01X |
| help |
| Say Y here if you want kernel low-level debugging support |
| on ARM Versatile platforms. |
| |
| config DEBUG_VEXPRESS_UART0_DETECT |
| bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" |
| depends on ARCH_VEXPRESS && CPU_CP15_MMU |
| help |
| This option enables a simple heuristic which tries to determine |
| the motherboard's memory map variant (original or RS1) and then |
| choose the relevant UART0 base address. |
| |
| Note that this will only work with standard A-class core tiles, |
| and may fail with non-standard SMM or custom software models. |
| |
| config DEBUG_VEXPRESS_UART0_CA9 |
| bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" |
| depends on ARCH_VEXPRESS |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0x10009000. Except for custom models, |
| this applies only to the V2P-CA9 tile. |
| |
| config DEBUG_VEXPRESS_UART0_RS1 |
| bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" |
| depends on ARCH_VEXPRESS |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0x1c090000. This applies to most |
| of the tiles using the RS1 memory map, including all new A-class |
| core tiles, FPGA-based SMMs and software models. |
| |
| config DEBUG_VEXPRESS_UART0_CRX |
| bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" |
| depends on ARCH_VEXPRESS && !MMU |
| select DEBUG_UART_PL01X |
| help |
| This option selects UART0 at 0xb0090000. This is appropriate for |
| Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 |
| |
| config DEBUG_VF_UART |
| bool "Vybrid UART" |
| depends on SOC_VF610 |
| help |
| Say Y here if you want kernel low-level debugging support |
| on Vybrid based platforms. |
| |
| config DEBUG_VT8500_UART0 |
| bool "Use UART0 on VIA/Wondermedia SoCs" |
| depends on ARCH_VT8500 |
| help |
| This option selects UART0 on VIA/Wondermedia System-on-a-chip |
| devices, including VT8500, WM8505, WM8650 and WM8850. |
| |
| config DEBUG_ZYNQ_UART0 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART0" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART0 on the Zynq platform. |
| |
| config DEBUG_ZYNQ_UART1 |
| bool "Kernel low-level debugging on Xilinx Zynq using UART1" |
| depends on ARCH_ZYNQ |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to UART1 on the Zynq platform. |
| |
| If you have a ZC702 board and want early boot messages to |
| appear on the USB serial adaptor, select this option. |
| |
| config DEBUG_ICEDCC |
| bool "Kernel low-level debugging via EmbeddedICE DCC channel" |
| help |
| Say Y here if you want the debug print routines to direct |
| their output to the EmbeddedICE macrocell's DCC channel using |
| co-processor 14. This is known to work on the ARM9 style ICE |
| channel and on the XScale with the PEEDI. |
| |
| Note that the system will appear to hang during boot if there |
| is nothing connected to read from the DCC. |
| |
| config DEBUG_SEMIHOSTING |
| bool "Kernel low-level debug output via semihosting I/O" |
| help |
| Semihosting enables code running on an ARM target to use |
| the I/O facilities on a host debugger/emulator through a |
| simple SVC call. The host debugger or emulator must have |
| semihosting enabled for the special svc call to be trapped |
| otherwise the kernel will crash. |
| |
| This is known to work with OpenOCD, as well as |
| ARM's Fast Models, or any other controlling environment |
| that implements semihosting. |
| |
| For more details about semihosting, please see |
| chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. |
| |
| config DEBUG_LL_UART_8250 |
| bool "Kernel low-level debugging via 8250 UART" |
| help |
| Say Y here if you wish the debug print routes to direct |
| their output to an 8250 UART. You can use this option |
| to provide the parameters for the 8250 UART rather than |
| selecting one of the platform specific options above if |
| you know the parameters for the port. |
| |
| This option is preferred over the platform specific |
| options; the platform specific options are deprecated |
| and will be soon removed. |
| |
| config DEBUG_LL_UART_PL01X |
| bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" |
| help |
| Say Y here if you wish the debug print routes to direct |
| their output to a PL01x Primecell UART. You can use |
| this option to provide the parameters for the UART |
| rather than selecting one of the platform specific |
| options above if you know the parameters for the port. |
| |
| This option is preferred over the platform specific |
| options; the platform specific options are deprecated |
| and will be soon removed. |
| |
| endchoice |
| |
| config DEBUG_AT91_UART |
| bool |
| depends on ARCH_AT91 |
| |
| config DEBUG_EXYNOS_UART |
| bool |
| |
| config DEBUG_S3C2410_UART |
| bool |
| select DEBUG_S3C24XX_UART |
| |
| config DEBUG_S3C24XX_UART |
| bool |
| |
| config DEBUG_S3C64XX_UART |
| bool |
| |
| config DEBUG_S5PV210_UART |
| bool |
| |
| config DEBUG_S3C_UART |
| depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \ |
| DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \ |
| DEBUG_EXYNOS_UART |
| int |
| default "0" if DEBUG_S3C_UART0 |
| default "1" if DEBUG_S3C_UART1 |
| default "2" if DEBUG_S3C_UART2 |
| default "3" if DEBUG_S3C_UART3 |
| |
| config DEBUG_OMAP2PLUS_UART |
| bool |
| depends on ARCH_OMAP2PLUS |
| |
| config DEBUG_IMX_UART_PORT |
| int "i.MX Debug UART Port Selection" |
| depends on DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX50_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART || \ |
| DEBUG_IMX6Q_UART || \ |
| DEBUG_IMX6SL_UART || \ |
| DEBUG_IMX6SX_UART || \ |
| DEBUG_IMX6UL_UART || \ |
| DEBUG_IMX7D_UART |
| default 1 |
| help |
| Choose UART port on which kernel low-level debug messages |
| should be output. |
| |
| config DEBUG_VF_UART_PORT |
| int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART |
| default 1 |
| range 0 3 |
| depends on SOC_VF610 |
| help |
| Choose UART port on which kernel low-level debug messages |
| should be output. |
| |
| config DEBUG_TEGRA_UART |
| bool |
| depends on ARCH_TEGRA |
| |
| config DEBUG_STM32_UART |
| bool |
| depends on ARCH_STM32 |
| |
| config DEBUG_UART_FLOW_CONTROL |
| bool "Enable flow control (CTS) for the debug UART" |
| depends on DEBUG_LL |
| default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC |
| help |
| Some UART ports are connected to terminals that will use modem |
| control signals to indicate whether they are ready to receive text. |
| In practice this means that the terminal is asserting the special |
| control signal CTS (Clear To Send). If your debug UART supports |
| this and your debug terminal will require it, enable this option. |
| |
| config DEBUG_LL_INCLUDE |
| string |
| default "debug/sa1100.S" if DEBUG_SA1100 |
| default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP |
| default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| default "debug/at91.S" if DEBUG_AT91_UART |
| default "debug/asm9260.S" if DEBUG_ASM9260_UART |
| default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 |
| default "debug/dc21285.S" if DEBUG_DC21285_PORT |
| default "debug/meson.S" if DEBUG_MESON_UARTAO |
| default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X |
| default "debug/exynos.S" if DEBUG_EXYNOS_UART |
| default "debug/icedcc.S" if DEBUG_ICEDCC |
| default "debug/imx.S" if DEBUG_IMX1_UART || \ |
| DEBUG_IMX25_UART || \ |
| DEBUG_IMX21_IMX27_UART || \ |
| DEBUG_IMX31_UART || \ |
| DEBUG_IMX35_UART || \ |
| DEBUG_IMX50_UART || \ |
| DEBUG_IMX51_UART || \ |
| DEBUG_IMX53_UART ||\ |
| DEBUG_IMX6Q_UART || \ |
| DEBUG_IMX6SL_UART || \ |
| DEBUG_IMX6SX_UART || \ |
| DEBUG_IMX6UL_UART || \ |
| DEBUG_IMX7D_UART |
| default "debug/msm.S" if DEBUG_QCOM_UARTDM |
| default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART |
| default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 |
| default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2 |
| default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 |
| default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2 |
| default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 |
| default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 |
| default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 |
| default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART |
| default "debug/s5pv210.S" if DEBUG_S5PV210_UART |
| default "debug/sti.S" if DEBUG_STIH41X_ASC2 |
| default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 |
| default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0 |
| default "debug/stm32.S" if DEBUG_STM32_UART |
| default "debug/tegra.S" if DEBUG_TEGRA_UART |
| default "debug/ux500.S" if DEBUG_UX500_UART |
| default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT |
| default "debug/vf.S" if DEBUG_VF_UART |
| default "debug/vt8500.S" if DEBUG_VT8500_UART0 |
| default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 |
| default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART |
| default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 |
| default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART |
| default "mach/debug-macro.S" |
| |
| # Compatibility options for PL01x |
| config DEBUG_UART_PL01X |
| bool |
| |
| # Compatibility options for 8250 |
| config DEBUG_UART_8250 |
| def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC |
| |
| config DEBUG_UART_PHYS |
| hex "Physical base address of debug UART" |
| default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 |
| default 0x01c28000 if DEBUG_SUNXI_UART0 |
| default 0x01c28400 if DEBUG_SUNXI_UART1 |
| default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 |
| default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 |
| default 0x01f02800 if DEBUG_SUNXI_R_UART |
| default 0x02530c00 if DEBUG_KEYSTONE_UART0 |
| default 0x02531000 if DEBUG_KEYSTONE_UART1 |
| default 0x03010fe0 if ARCH_RPC |
| default 0x07000000 if DEBUG_SUN9I_UART0 |
| default 0x09530000 if DEBUG_STIH418_SBC_ASC0 |
| default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ |
| DEBUG_VEXPRESS_UART0_CA9 |
| default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT |
| default 0x10124000 if DEBUG_RK3X_UART0 |
| default 0x10126000 if DEBUG_RK3X_UART1 |
| default 0x101f1000 if DEBUG_VERSATILE |
| default 0x101fb000 if DEBUG_NOMADIK_UART |
| default 0x10210000 if DEBUG_RV1108_UART2 |
| default 0x10220000 if DEBUG_RV1108_UART1 |
| default 0x10230000 if DEBUG_RV1108_UART0 |
| default 0x11002000 if DEBUG_MT8127_UART0 |
| default 0x11006000 if DEBUG_MT6589_UART0 |
| default 0x11009000 if DEBUG_MT8135_UART3 |
| default 0x16000000 if DEBUG_INTEGRATOR |
| default 0x1600d000 if DEBUG_SD5203_UART |
| default 0x18000300 if DEBUG_BCM_5301X |
| default 0x18000400 if DEBUG_BCM_HR2 |
| default 0x18023000 if DEBUG_BCM_IPROC_UART3 |
| default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 |
| default 0x1f221000 if DEBUG_MSTARV7_PMUART |
| default 0x20001000 if DEBUG_HIP01_UART |
| default 0x20060000 if DEBUG_RK29_UART0 |
| default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 |
| default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 |
| default 0x20201000 if DEBUG_BCM2835 |
| default 0x3e000000 if DEBUG_BCM_KONA_UART |
| default 0x3f201000 if DEBUG_BCM2836 |
| default 0x40010000 if STM32MP1_DEBUG_UART |
| default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ |
| STM32H7_DEBUG_UART |
| default 0x40028000 if DEBUG_AT91_SAMV7_USART1 |
| default 0x40081000 if DEBUG_LPC18XX_UART0 |
| default 0x40090000 if DEBUG_LPC32XX |
| default 0x40100000 if DEBUG_PXA_UART1 |
| default 0x42000000 if DEBUG_GEMINI |
| default 0x44e09000 if DEBUG_AM33XXUART1 |
| default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 |
| default 0x48022000 if DEBUG_TI81XXUART2 |
| default 0x48024000 if DEBUG_TI81XXUART3 |
| default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ |
| DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 |
| default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ |
| DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 |
| default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 |
| default 0x49020000 if DEBUG_OMAP3UART3 |
| default 0x49042000 if DEBUG_OMAP3UART4 |
| default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ |
| DEBUG_S3C2410_UART0) |
| default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ |
| DEBUG_S3C2410_UART1) |
| default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ |
| DEBUG_S3C2410_UART2) |
| default 0x78000000 if DEBUG_CNS3XXX |
| default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 |
| default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 |
| default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 |
| default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 |
| default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 |
| default 0x80010000 if DEBUG_ASM9260_UART |
| default 0x80070000 if DEBUG_IMX23_UART |
| default 0x80074000 if DEBUG_IMX28_UART |
| default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX |
| default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART |
| default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX |
| default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN |
| default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN |
| default 0xd0000000 if DEBUG_SPEAR3XX |
| default 0xd0012000 if DEBUG_MVEBU_UART0 |
| default 0xc81004c0 if DEBUG_MESON_UARTAO |
| default 0xd4017000 if DEBUG_MMP_UART2 |
| default 0xd4018000 if DEBUG_MMP_UART3 |
| default 0xe0000000 if DEBUG_SPEAR13XX |
| default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 |
| default 0xe4007000 if DEBUG_HIP04_UART |
| default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 |
| default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 |
| default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2 |
| default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 |
| default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 |
| default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 |
| default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 |
| default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 |
| default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 |
| default 0xe8009000 if DEBUG_R7S9210_SCIF4 |
| default 0xf0000000 if DEBUG_DIGICOLOR_UA0 |
| default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE |
| default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE |
| default 0xf7fc9000 if DEBUG_BERLIN_UART |
| default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1 |
| default 0xf8b00000 if DEBUG_HIX5HD2_UART |
| default 0xf991e000 if DEBUG_QCOM_UARTDM |
| default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 |
| default 0xfcb00000 if DEBUG_HI3620_UART |
| default 0xfd883000 if DEBUG_ALPINE_UART0 |
| default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 |
| default 0xfe800000 if ARCH_IOP32X |
| default 0xfed32000 if DEBUG_STIH41X_ASC2 |
| default 0xff690000 if DEBUG_RK32_UART2 |
| default 0xffc02000 if DEBUG_SOCFPGA_UART0 |
| default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 |
| default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 |
| default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 |
| default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 |
| default 0xfff36000 if DEBUG_HIGHBANK_UART |
| default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 |
| default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 |
| default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 |
| default 0xfffe8600 if DEBUG_BCM63XX_UART |
| default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU |
| default 0xfffff200 if DEBUG_AT91_RM9200_DBGU |
| depends on ARCH_EP93XX || \ |
| DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ |
| DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ |
| DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ |
| DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ |
| DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ |
| DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ |
| DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ |
| DEBUG_RCAR_GEN2_SCIFA2 || \ |
| DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ |
| DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ |
| DEBUG_S3C64XX_UART || \ |
| DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ |
| DEBUG_DIGICOLOR_UA0 || \ |
| DEBUG_AT91_UART || DEBUG_STM32_UART || \ |
| DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ |
| DEBUG_STIH418_SBC_ASC0 |
| |
| config DEBUG_UART_VIRT |
| hex "Virtual base address of debug UART" |
| default 0xc881f000 if DEBUG_RV1108_UART2 |
| default 0xc8821000 if DEBUG_RV1108_UART1 |
| default 0xc8912000 if DEBUG_RV1108_UART0 |
| default 0xe0010fe0 if ARCH_RPC |
| default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 |
| default 0xf0010000 if DEBUG_ASM9260_UART |
| default 0xf0100000 if DEBUG_DIGICOLOR_UA0 |
| default 0xf01fb000 if DEBUG_NOMADIK_UART |
| default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 |
| default 0xf0221000 if DEBUG_MSTARV7_PMUART |
| default 0xf1000300 if DEBUG_BCM_5301X |
| default 0xf1000400 if DEBUG_BCM_HR2 |
| default 0xf1002000 if DEBUG_MT8127_UART0 |
| default 0xf1006000 if DEBUG_MT6589_UART0 |
| default 0xf1009000 if DEBUG_MT8135_UART3 |
| default 0xf1023000 if DEBUG_BCM_IPROC_UART3 |
| default 0xf11f1000 if DEBUG_VERSATILE |
| default 0xf1600000 if DEBUG_INTEGRATOR |
| default 0xf1c28000 if DEBUG_SUNXI_UART0 |
| default 0xf1c28400 if DEBUG_SUNXI_UART1 |
| default 0xf1f02800 if DEBUG_SUNXI_R_UART |
| default 0xf31004c0 if DEBUG_MESON_UARTAO |
| default 0xf4090000 if DEBUG_LPC32XX |
| default 0xf4200000 if DEBUG_GEMINI |
| default 0xf6200000 if DEBUG_PXA_UART1 |
| default 0xf7000000 if DEBUG_SUN9I_UART0 |
| default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 |
| default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ |
| DEBUG_S3C2410_UART0) |
| default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 |
| default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 |
| default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 |
| default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ |
| DEBUG_S3C2410_UART1) |
| default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ |
| DEBUG_S3C2410_UART2) |
| default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 |
| default 0xf7fc9000 if DEBUG_BERLIN_UART |
| default 0xf8007000 if DEBUG_HIP04_UART |
| default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 |
| default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 |
| default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU |
| default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU |
| default 0xf9530000 if DEBUG_STIH418_SBC_ASC0 |
| default 0xf9e09000 if DEBUG_AM33XXUART1 |
| default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 |
| default 0xfa022000 if DEBUG_TI81XXUART2 |
| default 0xfa024000 if DEBUG_TI81XXUART3 |
| default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ |
| DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 |
| default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ |
| DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 |
| default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 |
| default 0xfa71e000 if DEBUG_QCOM_UARTDM |
| default 0xfb002000 if DEBUG_CNS3XXX |
| default 0xfb009000 if DEBUG_REALVIEW_STD_PORT |
| default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 |
| default 0xfb020000 if DEBUG_OMAP3UART3 |
| default 0xfb042000 if DEBUG_OMAP3UART4 |
| default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT |
| default 0xfcfe8600 if DEBUG_BCM63XX_UART |
| default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX |
| default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 |
| default 0xfd883000 if DEBUG_ALPINE_UART0 |
| default 0xfdd32000 if DEBUG_STIH41X_ASC2 |
| default 0xfe010000 if STM32MP1_DEBUG_UART |
| default 0xfe017000 if DEBUG_MMP_UART2 |
| default 0xfe018000 if DEBUG_MMP_UART3 |
| default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART |
| default 0xfe300000 if DEBUG_BCM_KONA_UART |
| default 0xfe800000 if ARCH_IOP32X |
| default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART |
| default 0xfeb24000 if DEBUG_RK3X_UART0 |
| default 0xfeb26000 if DEBUG_RK3X_UART1 |
| default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 |
| default 0xfeb31000 if DEBUG_KEYSTONE_UART1 |
| default 0xfec02000 if DEBUG_SOCFPGA_UART0 |
| default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1 |
| default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 |
| default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE |
| default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE |
| default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 |
| default 0xfec90000 if DEBUG_RK32_UART2 |
| default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 |
| default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART |
| default 0xfed60000 if DEBUG_RK29_UART0 |
| default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 |
| default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 |
| default 0xfedc0000 if DEBUG_EP93XX |
| default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 |
| default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART |
| default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN |
| default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN |
| default 0xfef36000 if DEBUG_HIGHBANK_UART |
| default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 |
| default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 |
| default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 |
| default 0xffd01000 if DEBUG_HIP01_UART |
| default DEBUG_UART_PHYS if !MMU |
| depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ |
| DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ |
| DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ |
| DEBUG_S3C64XX_UART || \ |
| DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ |
| DEBUG_DIGICOLOR_UA0 || \ |
| DEBUG_AT91_UART || DEBUG_STM32_UART || \ |
| DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ |
| DEBUG_STIH418_SBC_ASC0 |
| |
| config DEBUG_UART_8250_SHIFT |
| int "Register offset shift for the 8250 debug UART" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ |
| DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ |
| DEBUG_OMAP7XXUART3 |
| default 3 if DEBUG_MSTARV7_PMUART |
| default 2 |
| |
| config DEBUG_UART_8250_WORD |
| bool "Use 32-bit accesses for 8250 UART" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| depends on DEBUG_UART_8250_SHIFT >= 2 |
| default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ |
| DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ |
| DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ |
| DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ |
| DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ |
| DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 |
| |
| config DEBUG_UART_8250_PALMCHIP |
| bool "8250 UART is Palmchip BK-310x" |
| depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 |
| help |
| Palmchip provides a UART implementation compatible with 16550 |
| except for having a different register layout. Say Y here if |
| the debug UART is of this type. |
| |
| config DEBUG_UNCOMPRESS |
| bool "Enable decompressor debugging via DEBUG_LL output" |
| depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M |
| depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ |
| (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ |
| !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING |
| help |
| This option influences the normal decompressor output for |
| multiplatform kernels. Normally, multiplatform kernels disable |
| decompressor output because it is not possible to know where to |
| send the decompressor output. |
| |
| When this option is set, the selected DEBUG_LL output method |
| will be re-used for normal decompressor output on multiplatform |
| kernels. |
| |
| |
| config UNCOMPRESS_INCLUDE |
| string |
| default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ |
| PLAT_SAMSUNG || ARM_SINGLE_ARMV7M |
| default "mach/uncompress.h" |
| |
| config EARLY_PRINTK |
| bool "Early printk" |
| depends on DEBUG_LL |
| help |
| Say Y here if you want to have an early console using the |
| kernel low-level debugging functions. Add earlyprintk to your |
| kernel parameters to enable this console. |
| |
| config ARM_KPROBES_TEST |
| tristate "Kprobes test module" |
| depends on KPROBES && MODULES |
| help |
| Perform tests of kprobes API and instruction set simulation. |
| |
| config PID_IN_CONTEXTIDR |
| bool "Write the current PID to the CONTEXTIDR register" |
| depends on CPU_COPY_V6 |
| help |
| Enabling this option causes the kernel to write the current PID to |
| the PROCID field of the CONTEXTIDR register, at the expense of some |
| additional instructions during context switch. Say Y here only if you |
| are planning to use hardware trace tools with this kernel. |
| |
| source "drivers/hwtracing/coresight/Kconfig" |
