| // SPDX-License-Identifier: GPL-2.0-or-later |
| |
| /* |
| NetWinder Floating Point Emulator |
| (c) Rebel.com, 1998-1999 |
| (c) Philip Blundell, 1998-1999 |
| |
| Direct questions, comments to Scott Bambrough <scottb@netwinder.org> |
| |
| */ |
| |
| #include "fpa11.h" |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| |
| /* XXX */ |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/sched/signal.h> |
| #include <linux/init.h> |
| |
| #include <asm/thread_notify.h> |
| |
| #include "softfloat.h" |
| #include "fpopcode.h" |
| #include "fpmodule.h" |
| #include "fpa11.inl" |
| |
| /* kernel symbols required for signal handling */ |
| #ifdef CONFIG_FPE_NWFPE_XP |
| #define NWFPE_BITS "extended" |
| #else |
| #define NWFPE_BITS "double" |
| #endif |
| |
| #ifdef MODULE |
| void fp_send_sig(unsigned long sig, struct task_struct *p, int priv); |
| #else |
| #define fp_send_sig send_sig |
| #define kern_fp_enter fp_enter |
| |
| extern char fpe_type[]; |
| #endif |
| |
| static int nwfpe_notify(struct notifier_block *self, unsigned long cmd, void *v) |
| { |
| struct thread_info *thread = v; |
| |
| if (cmd == THREAD_NOTIFY_FLUSH) |
| nwfpe_init_fpa(&thread->fpstate); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block nwfpe_notifier_block = { |
| .notifier_call = nwfpe_notify, |
| }; |
| |
| /* kernel function prototypes required */ |
| void fp_setup(void); |
| |
| /* external declarations for saved kernel symbols */ |
| extern void (*kern_fp_enter)(void); |
| |
| /* Original value of fp_enter from kernel before patched by fpe_init. */ |
| static void (*orig_fp_enter)(void); |
| |
| /* forward declarations */ |
| extern void nwfpe_enter(void); |
| |
| static int __init fpe_init(void) |
| { |
| if (sizeof(FPA11) > sizeof(union fp_state)) { |
| pr_err("nwfpe: bad structure size\n"); |
| return -EINVAL; |
| } |
| |
| if (sizeof(FPREG) != 12) { |
| pr_err("nwfpe: bad register size\n"); |
| return -EINVAL; |
| } |
| if (fpe_type[0] && strcmp(fpe_type, "nwfpe")) |
| return 0; |
| |
| /* Display title, version and copyright information. */ |
| pr_info("NetWinder Floating Point Emulator V0.97 (" |
| NWFPE_BITS " precision)\n"); |
| |
| thread_register_notifier(&nwfpe_notifier_block); |
| |
| /* Save pointer to the old FP handler and then patch ourselves in */ |
| orig_fp_enter = kern_fp_enter; |
| kern_fp_enter = nwfpe_enter; |
| |
| return 0; |
| } |
| |
| static void __exit fpe_exit(void) |
| { |
| thread_unregister_notifier(&nwfpe_notifier_block); |
| /* Restore the values we saved earlier. */ |
| kern_fp_enter = orig_fp_enter; |
| } |
| |
| /* |
| ScottB: November 4, 1998 |
| |
| Moved this function out of softfloat-specialize into fpmodule.c. |
| This effectively isolates all the changes required for integrating with the |
| Linux kernel into fpmodule.c. Porting to NetBSD should only require modifying |
| fpmodule.c to integrate with the NetBSD kernel (I hope!). |
| |
| [1/1/99: Not quite true any more unfortunately. There is Linux-specific |
| code to access data in user space in some other source files at the |
| moment (grep for get_user / put_user calls). --philb] |
| |
| This function is called by the SoftFloat routines to raise a floating |
| point exception. We check the trap enable byte in the FPSR, and raise |
| a SIGFPE exception if necessary. If not the relevant bits in the |
| cumulative exceptions flag byte are set and we return. |
| */ |
| |
| #ifdef CONFIG_DEBUG_USER |
| /* By default, ignore inexact errors as there are far too many of them to log */ |
| static int debug = ~BIT_IXC; |
| #endif |
| |
| void float_raise(signed char flags) |
| { |
| register unsigned int fpsr, cumulativeTraps; |
| |
| #ifdef CONFIG_DEBUG_USER |
| if (flags & debug) |
| printk(KERN_DEBUG |
| "NWFPE: %s[%d] takes exception %08x at %ps from %08lx\n", |
| current->comm, current->pid, flags, |
| __builtin_return_address(0), GET_USERREG()->ARM_pc); |
| #endif |
| |
| /* Read fpsr and initialize the cumulativeTraps. */ |
| fpsr = readFPSR(); |
| cumulativeTraps = 0; |
| |
| /* For each type of exception, the cumulative trap exception bit is only |
| set if the corresponding trap enable bit is not set. */ |
| if ((!(fpsr & BIT_IXE)) && (flags & BIT_IXC)) |
| cumulativeTraps |= BIT_IXC; |
| if ((!(fpsr & BIT_UFE)) && (flags & BIT_UFC)) |
| cumulativeTraps |= BIT_UFC; |
| if ((!(fpsr & BIT_OFE)) && (flags & BIT_OFC)) |
| cumulativeTraps |= BIT_OFC; |
| if ((!(fpsr & BIT_DZE)) && (flags & BIT_DZC)) |
| cumulativeTraps |= BIT_DZC; |
| if ((!(fpsr & BIT_IOE)) && (flags & BIT_IOC)) |
| cumulativeTraps |= BIT_IOC; |
| |
| /* Set the cumulative exceptions flags. */ |
| if (cumulativeTraps) |
| writeFPSR(fpsr | cumulativeTraps); |
| |
| /* Raise an exception if necessary. */ |
| if (fpsr & (flags << 16)) |
| fp_send_sig(SIGFPE, current, 1); |
| } |
| |
| module_init(fpe_init); |
| module_exit(fpe_exit); |
| |
| MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>"); |
| MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)"); |
| MODULE_LICENSE("GPL"); |
| |
| #ifdef CONFIG_DEBUG_USER |
| module_param(debug, int, 0644); |
| #endif |