| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), |
| * IBM Corp. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| |
| #include <asm/sections.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/iommu.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/isa-bridge.h> |
| |
| #include "maple.h" |
| |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| static struct pci_controller *u3_agp, *u3_ht, *u4_pcie; |
| |
| static int __init fixup_one_level_bus_range(struct device_node *node, int higher) |
| { |
| for (; node; node = node->sibling) { |
| const int *bus_range; |
| const unsigned int *class_code; |
| int len; |
| |
| /* For PCI<->PCI bridges or CardBus bridges, we go down */ |
| class_code = of_get_property(node, "class-code", NULL); |
| if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && |
| (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) |
| continue; |
| bus_range = of_get_property(node, "bus-range", &len); |
| if (bus_range != NULL && len > 2 * sizeof(int)) { |
| if (bus_range[1] > higher) |
| higher = bus_range[1]; |
| } |
| higher = fixup_one_level_bus_range(node->child, higher); |
| } |
| return higher; |
| } |
| |
| /* This routine fixes the "bus-range" property of all bridges in the |
| * system since they tend to have their "last" member wrong on macs |
| * |
| * Note that the bus numbers manipulated here are OF bus numbers, they |
| * are not Linux bus numbers. |
| */ |
| static void __init fixup_bus_range(struct device_node *bridge) |
| { |
| int *bus_range; |
| struct property *prop; |
| int len; |
| |
| /* Lookup the "bus-range" property for the hose */ |
| prop = of_find_property(bridge, "bus-range", &len); |
| if (prop == NULL || prop->value == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %pOF\n", |
| bridge); |
| return; |
| } |
| bus_range = prop->value; |
| bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); |
| } |
| |
| |
| static unsigned long u3_agp_cfa0(u8 devfn, u8 off) |
| { |
| return (1 << (unsigned long)PCI_SLOT(devfn)) | |
| ((unsigned long)PCI_FUNC(devfn) << 8) | |
| ((unsigned long)off & 0xFCUL); |
| } |
| |
| static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off) |
| { |
| return ((unsigned long)bus << 16) | |
| ((unsigned long)devfn << 8) | |
| ((unsigned long)off & 0xFCUL) | |
| 1UL; |
| } |
| |
| static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose, |
| u8 bus, u8 dev_fn, u8 offset) |
| { |
| unsigned int caddr; |
| |
| if (bus == hose->first_busno) { |
| if (dev_fn < (11 << 3)) |
| return NULL; |
| caddr = u3_agp_cfa0(dev_fn, offset); |
| } else |
| caddr = u3_agp_cfa1(bus, dev_fn, offset); |
| |
| /* Uninorth will return garbage if we don't read back the value ! */ |
| do { |
| out_le32(hose->cfg_addr, caddr); |
| } while (in_le32(hose->cfg_addr) != caddr); |
| |
| offset &= 0x07; |
| return hose->cfg_data + offset; |
| } |
| |
| static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| *val = in_8(addr); |
| break; |
| case 2: |
| *val = in_le16(addr); |
| break; |
| default: |
| *val = in_le32(addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| out_8(addr, val); |
| break; |
| case 2: |
| out_le16(addr, val); |
| break; |
| default: |
| out_le32(addr, val); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops u3_agp_pci_ops = |
| { |
| .read = u3_agp_read_config, |
| .write = u3_agp_write_config, |
| }; |
| |
| static unsigned long u3_ht_cfa0(u8 devfn, u8 off) |
| { |
| return (devfn << 8) | off; |
| } |
| |
| static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off) |
| { |
| return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL; |
| } |
| |
| static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose, |
| u8 bus, u8 devfn, u8 offset) |
| { |
| if (bus == hose->first_busno) { |
| if (PCI_SLOT(devfn) == 0) |
| return NULL; |
| return hose->cfg_data + u3_ht_cfa0(devfn, offset); |
| } else |
| return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset); |
| } |
| |
| static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset, |
| int len, u32 *val) |
| { |
| volatile void __iomem *addr; |
| |
| addr = hose->cfg_addr; |
| addr += ((offset & ~3) << 2) + (4 - len - (offset & 3)); |
| |
| switch (len) { |
| case 1: |
| *val = in_8(addr); |
| break; |
| case 2: |
| *val = in_be16(addr); |
| break; |
| default: |
| *val = in_be32(addr); |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset, |
| int len, u32 val) |
| { |
| volatile void __iomem *addr; |
| |
| addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3)); |
| |
| if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST) |
| return PCIBIOS_SUCCESSFUL; |
| |
| switch (len) { |
| case 1: |
| out_8(addr, val); |
| break; |
| case 2: |
| out_be16(addr, val); |
| break; |
| default: |
| out_be32(addr, val); |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) |
| return u3_ht_root_read_config(hose, offset, len, val); |
| |
| if (offset > 0xff) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| *val = in_8(addr); |
| break; |
| case 2: |
| *val = in_le16(addr); |
| break; |
| default: |
| *val = in_le32(addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0)) |
| return u3_ht_root_write_config(hose, offset, len, val); |
| |
| if (offset > 0xff) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| out_8(addr, val); |
| break; |
| case 2: |
| out_le16(addr, val); |
| break; |
| default: |
| out_le32(addr, val); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops u3_ht_pci_ops = |
| { |
| .read = u3_ht_read_config, |
| .write = u3_ht_write_config, |
| }; |
| |
| static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off) |
| { |
| return (1 << PCI_SLOT(devfn)) | |
| (PCI_FUNC(devfn) << 8) | |
| ((off >> 8) << 28) | |
| (off & 0xfcu); |
| } |
| |
| static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn, |
| unsigned int off) |
| { |
| return (bus << 16) | |
| (devfn << 8) | |
| ((off >> 8) << 28) | |
| (off & 0xfcu) | 1u; |
| } |
| |
| static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose, |
| u8 bus, u8 dev_fn, int offset) |
| { |
| unsigned int caddr; |
| |
| if (bus == hose->first_busno) |
| caddr = u4_pcie_cfa0(dev_fn, offset); |
| else |
| caddr = u4_pcie_cfa1(bus, dev_fn, offset); |
| |
| /* Uninorth will return garbage if we don't read back the value ! */ |
| do { |
| out_le32(hose->cfg_addr, caddr); |
| } while (in_le32(hose->cfg_addr) != caddr); |
| |
| offset &= 0x03; |
| return hose->cfg_data + offset; |
| } |
| |
| static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (offset >= 0x1000) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| *val = in_8(addr); |
| break; |
| case 2: |
| *val = in_le16(addr); |
| break; |
| default: |
| *val = in_le32(addr); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose; |
| volatile void __iomem *addr; |
| |
| hose = pci_bus_to_host(bus); |
| if (hose == NULL) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (offset >= 0x1000) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); |
| if (!addr) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| /* |
| * Note: the caller has already checked that offset is |
| * suitably aligned and that len is 1, 2 or 4. |
| */ |
| switch (len) { |
| case 1: |
| out_8(addr, val); |
| break; |
| case 2: |
| out_le16(addr, val); |
| break; |
| default: |
| out_le32(addr, val); |
| break; |
| } |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops u4_pcie_pci_ops = |
| { |
| .read = u4_pcie_read_config, |
| .write = u4_pcie_write_config, |
| }; |
| |
| static void __init setup_u3_agp(struct pci_controller* hose) |
| { |
| /* On G5, we move AGP up to high bus number so we don't need |
| * to reassign bus numbers for HT. If we ever have P2P bridges |
| * on AGP, we'll have to move pci_assign_all_buses to the |
| * pci_controller structure so we enable it for AGP and not for |
| * HT childs. |
| * We hard code the address because of the different size of |
| * the reg address cell, we shall fix that by killing struct |
| * reg_property and using some accessor functions instead |
| */ |
| hose->first_busno = 0xf0; |
| hose->last_busno = 0xff; |
| hose->ops = &u3_agp_pci_ops; |
| hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); |
| hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); |
| |
| u3_agp = hose; |
| } |
| |
| static void __init setup_u4_pcie(struct pci_controller* hose) |
| { |
| /* We currently only implement the "non-atomic" config space, to |
| * be optimised later. |
| */ |
| hose->ops = &u4_pcie_pci_ops; |
| hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); |
| hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); |
| |
| u4_pcie = hose; |
| } |
| |
| static void __init setup_u3_ht(struct pci_controller* hose) |
| { |
| hose->ops = &u3_ht_pci_ops; |
| |
| /* We hard code the address because of the different size of |
| * the reg address cell, we shall fix that by killing struct |
| * reg_property and using some accessor functions instead |
| */ |
| hose->cfg_data = ioremap(0xf2000000, 0x02000000); |
| hose->cfg_addr = ioremap(0xf8070000, 0x1000); |
| |
| hose->first_busno = 0; |
| hose->last_busno = 0xef; |
| |
| u3_ht = hose; |
| } |
| |
| static int __init maple_add_bridge(struct device_node *dev) |
| { |
| int len; |
| struct pci_controller *hose; |
| char* disp_name; |
| const int *bus_range; |
| int primary = 1; |
| |
| DBG("Adding PCI host bridge %pOF\n", dev); |
| |
| bus_range = of_get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n", |
| dev); |
| } |
| |
| hose = pcibios_alloc_controller(dev); |
| if (hose == NULL) |
| return -ENOMEM; |
| hose->first_busno = bus_range ? bus_range[0] : 0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| hose->controller_ops = maple_pci_controller_ops; |
| |
| disp_name = NULL; |
| if (of_device_is_compatible(dev, "u3-agp")) { |
| setup_u3_agp(hose); |
| disp_name = "U3-AGP"; |
| primary = 0; |
| } else if (of_device_is_compatible(dev, "u3-ht")) { |
| setup_u3_ht(hose); |
| disp_name = "U3-HT"; |
| primary = 1; |
| } else if (of_device_is_compatible(dev, "u4-pcie")) { |
| setup_u4_pcie(hose); |
| disp_name = "U4-PCIE"; |
| primary = 0; |
| } |
| printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", |
| disp_name, hose->first_busno, hose->last_busno); |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| pci_process_bridge_OF_ranges(hose, dev, primary); |
| |
| /* Fixup "bus-range" OF property */ |
| fixup_bus_range(dev); |
| |
| /* Check for legacy IOs */ |
| isa_bridge_find_early(hose); |
| |
| /* create pci_dn's for DT nodes under this PHB */ |
| pci_devs_phb_init_dynamic(hose); |
| |
| return 0; |
| } |
| |
| |
| void maple_pci_irq_fixup(struct pci_dev *dev) |
| { |
| DBG(" -> maple_pci_irq_fixup\n"); |
| |
| /* Fixup IRQ for PCIe host */ |
| if (u4_pcie != NULL && dev->bus->number == 0 && |
| pci_bus_to_host(dev->bus) == u4_pcie) { |
| printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); |
| dev->irq = irq_create_mapping(NULL, 1); |
| if (dev->irq) |
| irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); |
| } |
| |
| /* Hide AMD8111 IDE interrupt when in legacy mode so |
| * the driver calls pci_get_legacy_ide_irq() |
| */ |
| if (dev->vendor == PCI_VENDOR_ID_AMD && |
| dev->device == PCI_DEVICE_ID_AMD_8111_IDE && |
| (dev->class & 5) != 5) { |
| dev->irq = 0; |
| } |
| |
| DBG(" <- maple_pci_irq_fixup\n"); |
| } |
| |
| static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge) |
| { |
| struct pci_controller *hose = pci_bus_to_host(bridge->bus); |
| struct device_node *np, *child; |
| |
| if (hose != u3_agp) |
| return 0; |
| |
| /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We |
| * assume there is no P2P bridge on the AGP bus, which should be a |
| * safe assumptions hopefully. |
| */ |
| np = hose->dn; |
| PCI_DN(np)->busno = 0xf0; |
| for_each_child_of_node(np, child) |
| PCI_DN(child)->busno = 0xf0; |
| |
| return 0; |
| } |
| |
| void __init maple_pci_init(void) |
| { |
| struct device_node *np, *root; |
| struct device_node *ht = NULL; |
| |
| /* Probe root PCI hosts, that is on U3 the AGP host and the |
| * HyperTransport host. That one is actually "kept" around |
| * and actually added last as it's resource management relies |
| * on the AGP resources to have been setup first |
| */ |
| root = of_find_node_by_path("/"); |
| if (root == NULL) { |
| printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); |
| return; |
| } |
| for_each_child_of_node(root, np) { |
| if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "ht")) |
| continue; |
| if ((of_device_is_compatible(np, "u4-pcie") || |
| of_device_is_compatible(np, "u3-agp")) && |
| maple_add_bridge(np) == 0) |
| of_node_get(np); |
| |
| if (of_device_is_compatible(np, "u3-ht")) { |
| of_node_get(np); |
| ht = np; |
| } |
| } |
| of_node_put(root); |
| |
| /* Now setup the HyperTransport host if we found any |
| */ |
| if (ht && maple_add_bridge(ht) != 0) |
| of_node_put(ht); |
| |
| ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare; |
| |
| /* Tell pci.c to not change any resource allocations. */ |
| pci_add_flags(PCI_PROBE_ONLY); |
| } |
| |
| int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) |
| { |
| struct device_node *np; |
| unsigned int defirq = channel ? 15 : 14; |
| unsigned int irq; |
| |
| if (pdev->vendor != PCI_VENDOR_ID_AMD || |
| pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) |
| return defirq; |
| |
| np = pci_device_to_OF_node(pdev); |
| if (np == NULL) { |
| printk("Failed to locate OF node for IDE %s\n", |
| pci_name(pdev)); |
| return defirq; |
| } |
| irq = irq_of_parse_and_map(np, channel & 0x1); |
| if (!irq) { |
| printk("Failed to map onboard IDE interrupt for channel %d\n", |
| channel); |
| return defirq; |
| } |
| return irq; |
| } |
| |
| static void quirk_ipr_msi(struct pci_dev *dev) |
| { |
| /* Something prevents MSIs from the IPR from working on Bimini, |
| * and the driver has no smarts to recover. So disable MSI |
| * on it for now. */ |
| |
| if (machine_is(maple)) { |
| dev->no_msi = 1; |
| dev_info(&dev->dev, "Quirk disabled MSI\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, |
| quirk_ipr_msi); |
| |
| struct pci_controller_ops maple_pci_controller_ops = { |
| }; |