| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SH-2007 board support. |
| * |
| * Copyright (C) 2003, 2004 SUGIOKA Toshinobu |
| * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> |
| */ |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/smsc911x.h> |
| #include <linux/platform_device.h> |
| #include <linux/ata_platform.h> |
| #include <linux/io.h> |
| #include <asm/machvec.h> |
| #include <mach/sh2007.h> |
| |
| /* Dummy supplies, where voltage doesn't matter */ |
| static struct regulator_consumer_supply dummy_supplies[] = { |
| REGULATOR_SUPPLY("vddvario", "smsc911x.0"), |
| REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), |
| REGULATOR_SUPPLY("vddvario", "smsc911x.1"), |
| REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), |
| }; |
| |
| struct smsc911x_platform_config smc911x_info = { |
| .flags = SMSC911X_USE_32BIT, |
| .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, |
| .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, |
| }; |
| |
| static struct resource smsc9118_0_resources[] = { |
| [0] = { |
| .start = SMC0_BASE, |
| .end = SMC0_BASE + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x240), |
| .end = evt2irq(0x240), |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct resource smsc9118_1_resources[] = { |
| [0] = { |
| .start = SMC1_BASE, |
| .end = SMC1_BASE + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = evt2irq(0x280), |
| .end = evt2irq(0x280), |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device smsc9118_0_device = { |
| .name = "smsc911x", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(smsc9118_0_resources), |
| .resource = smsc9118_0_resources, |
| .dev = { |
| .platform_data = &smc911x_info, |
| }, |
| }; |
| |
| static struct platform_device smsc9118_1_device = { |
| .name = "smsc911x", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(smsc9118_1_resources), |
| .resource = smsc9118_1_resources, |
| .dev = { |
| .platform_data = &smc911x_info, |
| }, |
| }; |
| |
| static struct resource cf_resources[] = { |
| [0] = { |
| .start = CF_BASE + CF_OFFSET, |
| .end = CF_BASE + CF_OFFSET + 0x0f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = CF_BASE + CF_OFFSET + 0x206, |
| .end = CF_BASE + CF_OFFSET + 0x20f, |
| .flags = IORESOURCE_MEM, |
| }, |
| [2] = { |
| .start = evt2irq(0x2c0), |
| .end = evt2irq(0x2c0), |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device cf_device = { |
| .name = "pata_platform", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(cf_resources), |
| .resource = cf_resources, |
| }; |
| |
| static struct platform_device *sh2007_devices[] __initdata = { |
| &smsc9118_0_device, |
| &smsc9118_1_device, |
| &cf_device, |
| }; |
| |
| static int __init sh2007_io_init(void) |
| { |
| regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); |
| |
| platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); |
| return 0; |
| } |
| subsys_initcall(sh2007_io_init); |
| |
| static void __init sh2007_init_irq(void) |
| { |
| plat_irq_setup_pins(IRQ_MODE_IRQ); |
| } |
| |
| /* |
| * Initialize the board |
| */ |
| static void __init sh2007_setup(char **cmdline_p) |
| { |
| pr_info("SH-2007 Setup..."); |
| |
| /* setup wait control registers for area 5 */ |
| __raw_writel(CS5BCR_D, CS5BCR); |
| __raw_writel(CS5WCR_D, CS5WCR); |
| __raw_writel(CS5PCR_D, CS5PCR); |
| |
| pr_cont(" done.\n"); |
| } |
| |
| /* |
| * The Machine Vector |
| */ |
| struct sh_machine_vector mv_sh2007 __initmv = { |
| .mv_setup = sh2007_setup, |
| .mv_name = "sh2007", |
| .mv_init_irq = sh2007_init_irq, |
| }; |