| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DRM driver for Multi-Inno MI0283QT panels |
| * |
| * Copyright 2016 Noralf Trønnes |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_mipi_dbi.h> |
| #include <drm/drm_modeset_helper.h> |
| #include <video/mipi_display.h> |
| |
| #define ILI9341_FRMCTR1 0xb1 |
| #define ILI9341_DISCTRL 0xb6 |
| #define ILI9341_ETMOD 0xb7 |
| |
| #define ILI9341_PWCTRL1 0xc0 |
| #define ILI9341_PWCTRL2 0xc1 |
| #define ILI9341_VMCTRL1 0xc5 |
| #define ILI9341_VMCTRL2 0xc7 |
| #define ILI9341_PWCTRLA 0xcb |
| #define ILI9341_PWCTRLB 0xcf |
| |
| #define ILI9341_PGAMCTRL 0xe0 |
| #define ILI9341_NGAMCTRL 0xe1 |
| #define ILI9341_DTCTRLA 0xe8 |
| #define ILI9341_DTCTRLB 0xea |
| #define ILI9341_PWRSEQ 0xed |
| |
| #define ILI9341_EN3GAM 0xf2 |
| #define ILI9341_PUMPCTRL 0xf7 |
| |
| #define ILI9341_MADCTL_BGR BIT(3) |
| #define ILI9341_MADCTL_MV BIT(5) |
| #define ILI9341_MADCTL_MX BIT(6) |
| #define ILI9341_MADCTL_MY BIT(7) |
| |
| static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, |
| struct drm_crtc_state *crtc_state, |
| struct drm_plane_state *plane_state) |
| { |
| struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); |
| struct mipi_dbi *dbi = &dbidev->dbi; |
| u8 addr_mode; |
| int ret, idx; |
| |
| if (!drm_dev_enter(pipe->crtc.dev, &idx)) |
| return; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| ret = mipi_dbi_poweron_conditional_reset(dbidev); |
| if (ret < 0) |
| goto out_exit; |
| if (ret == 1) |
| goto out_enable; |
| |
| mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); |
| |
| mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); |
| mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); |
| mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); |
| mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); |
| mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); |
| mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); |
| |
| /* Power Control */ |
| mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26); |
| mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11); |
| /* VCOM */ |
| mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e); |
| mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe); |
| |
| /* Memory Access Control */ |
| mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); |
| |
| /* Frame Rate */ |
| mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); |
| |
| /* Gamma */ |
| mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08); |
| mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); |
| mipi_dbi_command(dbi, ILI9341_PGAMCTRL, |
| 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, |
| 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); |
| mipi_dbi_command(dbi, ILI9341_NGAMCTRL, |
| 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, |
| 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); |
| |
| /* DDRAM */ |
| mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); |
| |
| /* Display */ |
| mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); |
| mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); |
| msleep(100); |
| |
| mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); |
| msleep(100); |
| |
| out_enable: |
| /* The PiTFT (ili9340) has a hardware reset circuit that |
| * resets only on power-on and not on each reboot through |
| * a gpio like the rpi-display does. |
| * As a result, we need to always apply the rotation value |
| * regardless of the display "on/off" state. |
| */ |
| switch (dbidev->rotation) { |
| default: |
| addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | |
| ILI9341_MADCTL_MX; |
| break; |
| case 90: |
| addr_mode = ILI9341_MADCTL_MY; |
| break; |
| case 180: |
| addr_mode = ILI9341_MADCTL_MV; |
| break; |
| case 270: |
| addr_mode = ILI9341_MADCTL_MX; |
| break; |
| } |
| addr_mode |= ILI9341_MADCTL_BGR; |
| mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); |
| mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); |
| out_exit: |
| drm_dev_exit(idx); |
| } |
| |
| static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { |
| .enable = mi0283qt_enable, |
| .disable = mipi_dbi_pipe_disable, |
| .update = mipi_dbi_pipe_update, |
| }; |
| |
| static const struct drm_display_mode mi0283qt_mode = { |
| DRM_SIMPLE_MODE(320, 240, 58, 43), |
| }; |
| |
| DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops); |
| |
| static const struct drm_driver mi0283qt_driver = { |
| .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| .fops = &mi0283qt_fops, |
| DRM_GEM_CMA_DRIVER_OPS_VMAP, |
| .debugfs_init = mipi_dbi_debugfs_init, |
| .name = "mi0283qt", |
| .desc = "Multi-Inno MI0283QT", |
| .date = "20160614", |
| .major = 1, |
| .minor = 0, |
| }; |
| |
| static const struct of_device_id mi0283qt_of_match[] = { |
| { .compatible = "multi-inno,mi0283qt" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mi0283qt_of_match); |
| |
| static const struct spi_device_id mi0283qt_id[] = { |
| { "mi0283qt", 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(spi, mi0283qt_id); |
| |
| static int mi0283qt_probe(struct spi_device *spi) |
| { |
| struct device *dev = &spi->dev; |
| struct mipi_dbi_dev *dbidev; |
| struct drm_device *drm; |
| struct mipi_dbi *dbi; |
| struct gpio_desc *dc; |
| u32 rotation = 0; |
| int ret; |
| |
| dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver, |
| struct mipi_dbi_dev, drm); |
| if (IS_ERR(dbidev)) |
| return PTR_ERR(dbidev); |
| |
| dbi = &dbidev->dbi; |
| drm = &dbidev->drm; |
| |
| dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(dbi->reset)) |
| return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); |
| |
| dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); |
| if (IS_ERR(dc)) |
| return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); |
| |
| dbidev->regulator = devm_regulator_get(dev, "power"); |
| if (IS_ERR(dbidev->regulator)) |
| return PTR_ERR(dbidev->regulator); |
| |
| dbidev->backlight = devm_of_find_backlight(dev); |
| if (IS_ERR(dbidev->backlight)) |
| return PTR_ERR(dbidev->backlight); |
| |
| device_property_read_u32(dev, "rotation", &rotation); |
| |
| ret = mipi_dbi_spi_init(spi, dbi, dc); |
| if (ret) |
| return ret; |
| |
| ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation); |
| if (ret) |
| return ret; |
| |
| drm_mode_config_reset(drm); |
| |
| ret = drm_dev_register(drm, 0); |
| if (ret) |
| return ret; |
| |
| spi_set_drvdata(spi, drm); |
| |
| drm_fbdev_generic_setup(drm, 0); |
| |
| return 0; |
| } |
| |
| static int mi0283qt_remove(struct spi_device *spi) |
| { |
| struct drm_device *drm = spi_get_drvdata(spi); |
| |
| drm_dev_unplug(drm); |
| drm_atomic_helper_shutdown(drm); |
| |
| return 0; |
| } |
| |
| static void mi0283qt_shutdown(struct spi_device *spi) |
| { |
| drm_atomic_helper_shutdown(spi_get_drvdata(spi)); |
| } |
| |
| static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) |
| { |
| return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); |
| } |
| |
| static int __maybe_unused mi0283qt_pm_resume(struct device *dev) |
| { |
| drm_mode_config_helper_resume(dev_get_drvdata(dev)); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops mi0283qt_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) |
| }; |
| |
| static struct spi_driver mi0283qt_spi_driver = { |
| .driver = { |
| .name = "mi0283qt", |
| .owner = THIS_MODULE, |
| .of_match_table = mi0283qt_of_match, |
| .pm = &mi0283qt_pm_ops, |
| }, |
| .id_table = mi0283qt_id, |
| .probe = mi0283qt_probe, |
| .remove = mi0283qt_remove, |
| .shutdown = mi0283qt_shutdown, |
| }; |
| module_spi_driver(mi0283qt_spi_driver); |
| |
| MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); |
| MODULE_AUTHOR("Noralf Trønnes"); |
| MODULE_LICENSE("GPL"); |