| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * /dev/lcd driver for Apple Network Servers. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/fcntl.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| |
| #include <linux/uaccess.h> |
| #include <asm/sections.h> |
| #include <asm/prom.h> |
| #include <asm/io.h> |
| |
| #include "ans-lcd.h" |
| |
| #define ANSLCD_ADDR 0xf301c000 |
| #define ANSLCD_CTRL_IX 0x00 |
| #define ANSLCD_DATA_IX 0x10 |
| |
| static unsigned long anslcd_short_delay = 80; |
| static unsigned long anslcd_long_delay = 3280; |
| static volatile unsigned char __iomem *anslcd_ptr; |
| static DEFINE_MUTEX(anslcd_mutex); |
| |
| #undef DEBUG |
| |
| static void |
| anslcd_write_byte_ctrl ( unsigned char c ) |
| { |
| #ifdef DEBUG |
| printk(KERN_DEBUG "LCD: CTRL byte: %02x\n",c); |
| #endif |
| out_8(anslcd_ptr + ANSLCD_CTRL_IX, c); |
| switch(c) { |
| case 1: |
| case 2: |
| case 3: |
| udelay(anslcd_long_delay); break; |
| default: udelay(anslcd_short_delay); |
| } |
| } |
| |
| static void |
| anslcd_write_byte_data ( unsigned char c ) |
| { |
| out_8(anslcd_ptr + ANSLCD_DATA_IX, c); |
| udelay(anslcd_short_delay); |
| } |
| |
| static ssize_t |
| anslcd_write( struct file * file, const char __user * buf, |
| size_t count, loff_t *ppos ) |
| { |
| const char __user *p = buf; |
| int i; |
| |
| #ifdef DEBUG |
| printk(KERN_DEBUG "LCD: write\n"); |
| #endif |
| |
| if (!access_ok(buf, count)) |
| return -EFAULT; |
| |
| mutex_lock(&anslcd_mutex); |
| for ( i = *ppos; count > 0; ++i, ++p, --count ) |
| { |
| char c; |
| __get_user(c, p); |
| anslcd_write_byte_data( c ); |
| } |
| mutex_unlock(&anslcd_mutex); |
| *ppos = i; |
| return p - buf; |
| } |
| |
| static long |
| anslcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| char ch, __user *temp; |
| long ret = 0; |
| |
| #ifdef DEBUG |
| printk(KERN_DEBUG "LCD: ioctl(%d,%d)\n",cmd,arg); |
| #endif |
| |
| mutex_lock(&anslcd_mutex); |
| |
| switch ( cmd ) |
| { |
| case ANSLCD_CLEAR: |
| anslcd_write_byte_ctrl ( 0x38 ); |
| anslcd_write_byte_ctrl ( 0x0f ); |
| anslcd_write_byte_ctrl ( 0x06 ); |
| anslcd_write_byte_ctrl ( 0x01 ); |
| anslcd_write_byte_ctrl ( 0x02 ); |
| break; |
| case ANSLCD_SENDCTRL: |
| temp = (char __user *) arg; |
| __get_user(ch, temp); |
| for (; ch; temp++) { /* FIXME: This is ugly, but should work, as a \0 byte is not a valid command code */ |
| anslcd_write_byte_ctrl ( ch ); |
| __get_user(ch, temp); |
| } |
| break; |
| case ANSLCD_SETSHORTDELAY: |
| if (!capable(CAP_SYS_ADMIN)) |
| ret =-EACCES; |
| else |
| anslcd_short_delay=arg; |
| break; |
| case ANSLCD_SETLONGDELAY: |
| if (!capable(CAP_SYS_ADMIN)) |
| ret = -EACCES; |
| else |
| anslcd_long_delay=arg; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| mutex_unlock(&anslcd_mutex); |
| return ret; |
| } |
| |
| static int |
| anslcd_open( struct inode * inode, struct file * file ) |
| { |
| return 0; |
| } |
| |
| const struct file_operations anslcd_fops = { |
| .write = anslcd_write, |
| .unlocked_ioctl = anslcd_ioctl, |
| .open = anslcd_open, |
| .llseek = default_llseek, |
| }; |
| |
| static struct miscdevice anslcd_dev = { |
| LCD_MINOR, |
| "anslcd", |
| &anslcd_fops |
| }; |
| |
| static const char anslcd_logo[] __initconst = |
| "********************" /* Line #1 */ |
| "* LINUX! *" /* Line #3 */ |
| "* Welcome to *" /* Line #2 */ |
| "********************"; /* Line #4 */ |
| |
| static int __init |
| anslcd_init(void) |
| { |
| int a; |
| int retval; |
| struct device_node* node; |
| |
| node = of_find_node_by_name(NULL, "lcd"); |
| if (!node || !of_node_name_eq(node->parent, "gc")) { |
| of_node_put(node); |
| return -ENODEV; |
| } |
| of_node_put(node); |
| |
| anslcd_ptr = ioremap(ANSLCD_ADDR, 0x20); |
| |
| retval = misc_register(&anslcd_dev); |
| if(retval < 0){ |
| printk(KERN_INFO "LCD: misc_register failed\n"); |
| iounmap(anslcd_ptr); |
| return retval; |
| } |
| |
| #ifdef DEBUG |
| printk(KERN_DEBUG "LCD: init\n"); |
| #endif |
| |
| mutex_lock(&anslcd_mutex); |
| anslcd_write_byte_ctrl ( 0x38 ); |
| anslcd_write_byte_ctrl ( 0x0c ); |
| anslcd_write_byte_ctrl ( 0x06 ); |
| anslcd_write_byte_ctrl ( 0x01 ); |
| anslcd_write_byte_ctrl ( 0x02 ); |
| for(a=0;a<80;a++) { |
| anslcd_write_byte_data(anslcd_logo[a]); |
| } |
| mutex_unlock(&anslcd_mutex); |
| return 0; |
| } |
| |
| static void __exit |
| anslcd_exit(void) |
| { |
| misc_deregister(&anslcd_dev); |
| iounmap(anslcd_ptr); |
| } |
| |
| module_init(anslcd_init); |
| module_exit(anslcd_exit); |
| MODULE_LICENSE("GPL v2"); |