| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T |
| * |
| * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> |
| * http://royale.zerezo.com/dtv5100/ |
| * |
| * Inspired by gl861.c and au6610.c drivers |
| */ |
| |
| #include "dtv5100.h" |
| #include "zl10353.h" |
| #include "qt1010.h" |
| |
| /* debug */ |
| static int dvb_usb_dtv5100_debug; |
| module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| struct dtv5100_state { |
| unsigned char data[80]; |
| }; |
| |
| static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, |
| u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) |
| { |
| struct dtv5100_state *st = d->priv; |
| unsigned int pipe; |
| u8 request; |
| u8 type; |
| u16 value; |
| u16 index; |
| |
| switch (wlen) { |
| case 1: |
| /* write { reg }, read { value } */ |
| pipe = usb_rcvctrlpipe(d->udev, 0); |
| request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : |
| DTV5100_TUNER_READ); |
| type = USB_TYPE_VENDOR | USB_DIR_IN; |
| value = 0; |
| break; |
| case 2: |
| /* write { reg, value } */ |
| pipe = usb_sndctrlpipe(d->udev, 0); |
| request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : |
| DTV5100_TUNER_WRITE); |
| type = USB_TYPE_VENDOR | USB_DIR_OUT; |
| value = wbuf[1]; |
| break; |
| default: |
| warn("wlen = %x, aborting.", wlen); |
| return -EINVAL; |
| } |
| index = (addr << 8) + wbuf[0]; |
| |
| memcpy(st->data, rbuf, rlen); |
| msleep(1); /* avoid I2C errors */ |
| return usb_control_msg(d->udev, pipe, request, |
| type, value, index, st->data, rlen, |
| DTV5100_USB_TIMEOUT); |
| } |
| |
| /* I2C */ |
| static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| for (i = 0; i < num; i++) { |
| /* write/read request */ |
| if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { |
| if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, |
| msg[i].len, msg[i+1].buf, |
| msg[i+1].len) < 0) |
| break; |
| i++; |
| } else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, |
| msg[i].len, NULL, 0) < 0) |
| break; |
| } |
| |
| mutex_unlock(&d->i2c_mutex); |
| return i; |
| } |
| |
| static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dtv5100_i2c_algo = { |
| .master_xfer = dtv5100_i2c_xfer, |
| .functionality = dtv5100_i2c_func, |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static struct zl10353_config dtv5100_zl10353_config = { |
| .demod_address = DTV5100_DEMOD_ADDR, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| }; |
| |
| static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, |
| &adap->dev->i2c_adap); |
| if (adap->fe_adap[0].fe == NULL) |
| return -EIO; |
| |
| /* disable i2c gate, or it won't work... is this safe? */ |
| adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL; |
| |
| return 0; |
| } |
| |
| static struct qt1010_config dtv5100_qt1010_config = { |
| .i2c_address = DTV5100_TUNER_ADDR |
| }; |
| |
| static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| return dvb_attach(qt1010_attach, |
| adap->fe_adap[0].fe, &adap->dev->i2c_adap, |
| &dtv5100_qt1010_config) == NULL ? -ENODEV : 0; |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties dtv5100_properties; |
| |
| static int dtv5100_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| int i, ret; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| |
| /* initialize non qt1010/zl10353 part? */ |
| for (i = 0; dtv5100_init[i].request; i++) { |
| ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), |
| dtv5100_init[i].request, |
| USB_TYPE_VENDOR | USB_DIR_OUT, |
| dtv5100_init[i].value, |
| dtv5100_init[i].index, NULL, 0, |
| DTV5100_USB_TIMEOUT); |
| if (ret) |
| return ret; |
| } |
| |
| ret = dvb_usb_device_init(intf, &dtv5100_properties, |
| THIS_MODULE, NULL, adapter_nr); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct usb_device_id dtv5100_table[] = { |
| { USB_DEVICE(0x06be, 0xa232) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, dtv5100_table); |
| |
| static struct dvb_usb_device_properties dtv5100_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| .usb_ctrl = DEVICE_SPECIFIC, |
| |
| .size_of_priv = sizeof(struct dtv5100_state), |
| |
| .num_adapters = 1, |
| .adapter = {{ |
| .num_frontends = 1, |
| .fe = {{ |
| .frontend_attach = dtv5100_frontend_attach, |
| .tuner_attach = dtv5100_tuner_attach, |
| |
| .stream = { |
| .type = USB_BULK, |
| .count = 8, |
| .endpoint = 0x82, |
| .u = { |
| .bulk = { |
| .buffersize = 4096, |
| } |
| } |
| }, |
| }}, |
| } }, |
| |
| .i2c_algo = &dtv5100_i2c_algo, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { |
| .name = "AME DTV-5100 USB2.0 DVB-T", |
| .cold_ids = { NULL }, |
| .warm_ids = { &dtv5100_table[0], NULL }, |
| }, |
| } |
| }; |
| |
| static struct usb_driver dtv5100_driver = { |
| .name = "dvb_usb_dtv5100", |
| .probe = dtv5100_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = dtv5100_table, |
| }; |
| |
| module_usb_driver(dtv5100_driver); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |