| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Microchip switch driver main logic |
| * |
| * Copyright (C) 2017-2019 Microchip Technology Inc. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/export.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/microchip-ksz.h> |
| #include <linux/phy.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_bridge.h> |
| #include <linux/of_net.h> |
| #include <net/dsa.h> |
| #include <net/switchdev.h> |
| |
| #include "ksz_common.h" |
| |
| void ksz_update_port_member(struct ksz_device *dev, int port) |
| { |
| struct ksz_port *p = &dev->ports[port]; |
| struct dsa_switch *ds = dev->ds; |
| u8 port_member = 0, cpu_port; |
| const struct dsa_port *dp; |
| int i; |
| |
| if (!dsa_is_user_port(ds, port)) |
| return; |
| |
| dp = dsa_to_port(ds, port); |
| cpu_port = BIT(dsa_upstream_port(ds, port)); |
| |
| for (i = 0; i < ds->num_ports; i++) { |
| const struct dsa_port *other_dp = dsa_to_port(ds, i); |
| struct ksz_port *other_p = &dev->ports[i]; |
| u8 val = 0; |
| |
| if (!dsa_is_user_port(ds, i)) |
| continue; |
| if (port == i) |
| continue; |
| if (!dp->bridge_dev || dp->bridge_dev != other_dp->bridge_dev) |
| continue; |
| |
| if (other_p->stp_state == BR_STATE_FORWARDING && |
| p->stp_state == BR_STATE_FORWARDING) { |
| val |= BIT(port); |
| port_member |= BIT(i); |
| } |
| |
| dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); |
| } |
| |
| dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); |
| } |
| EXPORT_SYMBOL_GPL(ksz_update_port_member); |
| |
| static void port_r_cnt(struct ksz_device *dev, int port) |
| { |
| struct ksz_port_mib *mib = &dev->ports[port].mib; |
| u64 *dropped; |
| |
| /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ |
| while (mib->cnt_ptr < dev->reg_mib_cnt) { |
| dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, |
| &mib->counters[mib->cnt_ptr]); |
| ++mib->cnt_ptr; |
| } |
| |
| /* last one in storage */ |
| dropped = &mib->counters[dev->mib_cnt]; |
| |
| /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ |
| while (mib->cnt_ptr < dev->mib_cnt) { |
| dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, |
| dropped, &mib->counters[mib->cnt_ptr]); |
| ++mib->cnt_ptr; |
| } |
| mib->cnt_ptr = 0; |
| } |
| |
| static void ksz_mib_read_work(struct work_struct *work) |
| { |
| struct ksz_device *dev = container_of(work, struct ksz_device, |
| mib_read.work); |
| struct ksz_port_mib *mib; |
| struct ksz_port *p; |
| int i; |
| |
| for (i = 0; i < dev->port_cnt; i++) { |
| if (dsa_is_unused_port(dev->ds, i)) |
| continue; |
| |
| p = &dev->ports[i]; |
| mib = &p->mib; |
| mutex_lock(&mib->cnt_mutex); |
| |
| /* Only read MIB counters when the port is told to do. |
| * If not, read only dropped counters when link is not up. |
| */ |
| if (!p->read) { |
| const struct dsa_port *dp = dsa_to_port(dev->ds, i); |
| |
| if (!netif_carrier_ok(dp->slave)) |
| mib->cnt_ptr = dev->reg_mib_cnt; |
| } |
| port_r_cnt(dev, i); |
| p->read = false; |
| mutex_unlock(&mib->cnt_mutex); |
| } |
| |
| schedule_delayed_work(&dev->mib_read, dev->mib_read_interval); |
| } |
| |
| void ksz_init_mib_timer(struct ksz_device *dev) |
| { |
| int i; |
| |
| INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work); |
| |
| for (i = 0; i < dev->port_cnt; i++) |
| dev->dev_ops->port_init_cnt(dev, i); |
| } |
| EXPORT_SYMBOL_GPL(ksz_init_mib_timer); |
| |
| int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) |
| { |
| struct ksz_device *dev = ds->priv; |
| u16 val = 0xffff; |
| |
| dev->dev_ops->r_phy(dev, addr, reg, &val); |
| |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(ksz_phy_read16); |
| |
| int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) |
| { |
| struct ksz_device *dev = ds->priv; |
| |
| dev->dev_ops->w_phy(dev, addr, reg, val); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ksz_phy_write16); |
| |
| void ksz_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, |
| phy_interface_t interface) |
| { |
| struct ksz_device *dev = ds->priv; |
| struct ksz_port *p = &dev->ports[port]; |
| |
| /* Read all MIB counters when the link is going down. */ |
| p->read = true; |
| /* timer started */ |
| if (dev->mib_read_interval) |
| schedule_delayed_work(&dev->mib_read, 0); |
| } |
| EXPORT_SYMBOL_GPL(ksz_mac_link_down); |
| |
| int ksz_sset_count(struct dsa_switch *ds, int port, int sset) |
| { |
| struct ksz_device *dev = ds->priv; |
| |
| if (sset != ETH_SS_STATS) |
| return 0; |
| |
| return dev->mib_cnt; |
| } |
| EXPORT_SYMBOL_GPL(ksz_sset_count); |
| |
| void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf) |
| { |
| const struct dsa_port *dp = dsa_to_port(ds, port); |
| struct ksz_device *dev = ds->priv; |
| struct ksz_port_mib *mib; |
| |
| mib = &dev->ports[port].mib; |
| mutex_lock(&mib->cnt_mutex); |
| |
| /* Only read dropped counters if no link. */ |
| if (!netif_carrier_ok(dp->slave)) |
| mib->cnt_ptr = dev->reg_mib_cnt; |
| port_r_cnt(dev, port); |
| memcpy(buf, mib->counters, dev->mib_cnt * sizeof(u64)); |
| mutex_unlock(&mib->cnt_mutex); |
| } |
| EXPORT_SYMBOL_GPL(ksz_get_ethtool_stats); |
| |
| int ksz_port_bridge_join(struct dsa_switch *ds, int port, |
| struct net_device *br) |
| { |
| /* port_stp_state_set() will be called after to put the port in |
| * appropriate state so there is no need to do anything. |
| */ |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_bridge_join); |
| |
| void ksz_port_bridge_leave(struct dsa_switch *ds, int port, |
| struct net_device *br) |
| { |
| /* port_stp_state_set() will be called after to put the port in |
| * forwarding state so there is no need to do anything. |
| */ |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_bridge_leave); |
| |
| void ksz_port_fast_age(struct dsa_switch *ds, int port) |
| { |
| struct ksz_device *dev = ds->priv; |
| |
| dev->dev_ops->flush_dyn_mac_table(dev, port); |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_fast_age); |
| |
| int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb, |
| void *data) |
| { |
| struct ksz_device *dev = ds->priv; |
| int ret = 0; |
| u16 i = 0; |
| u16 entries = 0; |
| u8 timestamp = 0; |
| u8 fid; |
| u8 member; |
| struct alu_struct alu; |
| |
| do { |
| alu.is_static = false; |
| ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid, |
| &member, ×tamp, |
| &entries); |
| if (!ret && (member & BIT(port))) { |
| ret = cb(alu.mac, alu.fid, alu.is_static, data); |
| if (ret) |
| break; |
| } |
| i++; |
| } while (i < entries); |
| if (i >= entries) |
| ret = 0; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_fdb_dump); |
| |
| int ksz_port_mdb_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct ksz_device *dev = ds->priv; |
| struct alu_struct alu; |
| int index; |
| int empty = 0; |
| |
| alu.port_forward = 0; |
| for (index = 0; index < dev->num_statics; index++) { |
| if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { |
| /* Found one already in static MAC table. */ |
| if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && |
| alu.fid == mdb->vid) |
| break; |
| /* Remember the first empty entry. */ |
| } else if (!empty) { |
| empty = index + 1; |
| } |
| } |
| |
| /* no available entry */ |
| if (index == dev->num_statics && !empty) |
| return -ENOSPC; |
| |
| /* add entry */ |
| if (index == dev->num_statics) { |
| index = empty - 1; |
| memset(&alu, 0, sizeof(alu)); |
| memcpy(alu.mac, mdb->addr, ETH_ALEN); |
| alu.is_static = true; |
| } |
| alu.port_forward |= BIT(port); |
| if (mdb->vid) { |
| alu.is_use_fid = true; |
| |
| /* Need a way to map VID to FID. */ |
| alu.fid = mdb->vid; |
| } |
| dev->dev_ops->w_sta_mac_table(dev, index, &alu); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_mdb_add); |
| |
| int ksz_port_mdb_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct ksz_device *dev = ds->priv; |
| struct alu_struct alu; |
| int index; |
| int ret = 0; |
| |
| for (index = 0; index < dev->num_statics; index++) { |
| if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) { |
| /* Found one already in static MAC table. */ |
| if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) && |
| alu.fid == mdb->vid) |
| break; |
| } |
| } |
| |
| /* no available entry */ |
| if (index == dev->num_statics) |
| goto exit; |
| |
| /* clear port */ |
| alu.port_forward &= ~BIT(port); |
| if (!alu.port_forward) |
| alu.is_static = false; |
| dev->dev_ops->w_sta_mac_table(dev, index, &alu); |
| |
| exit: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ksz_port_mdb_del); |
| |
| int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) |
| { |
| struct ksz_device *dev = ds->priv; |
| |
| if (!dsa_is_user_port(ds, port)) |
| return 0; |
| |
| /* setup slave port */ |
| dev->dev_ops->port_setup(dev, port, false); |
| |
| /* port_stp_state_set() will be called after to enable the port so |
| * there is no need to do anything. |
| */ |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(ksz_enable_port); |
| |
| struct ksz_device *ksz_switch_alloc(struct device *base, void *priv) |
| { |
| struct dsa_switch *ds; |
| struct ksz_device *swdev; |
| |
| ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL); |
| if (!ds) |
| return NULL; |
| |
| ds->dev = base; |
| ds->num_ports = DSA_MAX_PORTS; |
| |
| swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL); |
| if (!swdev) |
| return NULL; |
| |
| ds->priv = swdev; |
| swdev->dev = base; |
| |
| swdev->ds = ds; |
| swdev->priv = priv; |
| |
| return swdev; |
| } |
| EXPORT_SYMBOL(ksz_switch_alloc); |
| |
| int ksz_switch_register(struct ksz_device *dev, |
| const struct ksz_dev_ops *ops) |
| { |
| struct device_node *port, *ports; |
| phy_interface_t interface; |
| unsigned int port_num; |
| int ret; |
| |
| if (dev->pdata) |
| dev->chip_id = dev->pdata->chip_id; |
| |
| dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(dev->reset_gpio)) |
| return PTR_ERR(dev->reset_gpio); |
| |
| if (dev->reset_gpio) { |
| gpiod_set_value_cansleep(dev->reset_gpio, 1); |
| usleep_range(10000, 12000); |
| gpiod_set_value_cansleep(dev->reset_gpio, 0); |
| msleep(100); |
| } |
| |
| mutex_init(&dev->dev_mutex); |
| mutex_init(&dev->regmap_mutex); |
| mutex_init(&dev->alu_mutex); |
| mutex_init(&dev->vlan_mutex); |
| |
| dev->dev_ops = ops; |
| |
| if (dev->dev_ops->detect(dev)) |
| return -EINVAL; |
| |
| ret = dev->dev_ops->init(dev); |
| if (ret) |
| return ret; |
| |
| /* Host port interface will be self detected, or specifically set in |
| * device tree. |
| */ |
| for (port_num = 0; port_num < dev->port_cnt; ++port_num) |
| dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA; |
| if (dev->dev->of_node) { |
| ret = of_get_phy_mode(dev->dev->of_node, &interface); |
| if (ret == 0) |
| dev->compat_interface = interface; |
| ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports"); |
| if (!ports) |
| ports = of_get_child_by_name(dev->dev->of_node, "ports"); |
| if (ports) |
| for_each_available_child_of_node(ports, port) { |
| if (of_property_read_u32(port, "reg", |
| &port_num)) |
| continue; |
| if (!(dev->port_mask & BIT(port_num))) { |
| of_node_put(port); |
| return -EINVAL; |
| } |
| of_get_phy_mode(port, |
| &dev->ports[port_num].interface); |
| } |
| dev->synclko_125 = of_property_read_bool(dev->dev->of_node, |
| "microchip,synclko-125"); |
| } |
| |
| ret = dsa_register_switch(dev->ds); |
| if (ret) { |
| dev->dev_ops->exit(dev); |
| return ret; |
| } |
| |
| /* Read MIB counters every 30 seconds to avoid overflow. */ |
| dev->mib_read_interval = msecs_to_jiffies(30000); |
| |
| /* Start the MIB timer. */ |
| schedule_delayed_work(&dev->mib_read, 0); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ksz_switch_register); |
| |
| void ksz_switch_remove(struct ksz_device *dev) |
| { |
| /* timer started */ |
| if (dev->mib_read_interval) { |
| dev->mib_read_interval = 0; |
| cancel_delayed_work_sync(&dev->mib_read); |
| } |
| |
| dev->dev_ops->exit(dev); |
| dsa_unregister_switch(dev->ds); |
| |
| if (dev->reset_gpio) |
| gpiod_set_value_cansleep(dev->reset_gpio, 1); |
| |
| } |
| EXPORT_SYMBOL(ksz_switch_remove); |
| |
| MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); |
| MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); |
| MODULE_LICENSE("GPL"); |