| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* Handle fileserver selection and rotation. |
| * |
| * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/fs.h> |
| #include <linux/sched.h> |
| #include <linux/delay.h> |
| #include <linux/sched/signal.h> |
| #include "internal.h" |
| #include "afs_fs.h" |
| |
| /* |
| * Begin iteration through a server list, starting with the vnode's last used |
| * server if possible, or the last recorded good server if not. |
| */ |
| static bool afs_start_fs_iteration(struct afs_operation *op, |
| struct afs_vnode *vnode) |
| { |
| struct afs_server *server; |
| void *cb_server; |
| int i; |
| |
| read_lock(&op->volume->servers_lock); |
| op->server_list = afs_get_serverlist( |
| rcu_dereference_protected(op->volume->servers, |
| lockdep_is_held(&op->volume->servers_lock))); |
| read_unlock(&op->volume->servers_lock); |
| |
| op->untried = (1UL << op->server_list->nr_servers) - 1; |
| op->index = READ_ONCE(op->server_list->preferred); |
| |
| cb_server = vnode->cb_server; |
| if (cb_server) { |
| /* See if the vnode's preferred record is still available */ |
| for (i = 0; i < op->server_list->nr_servers; i++) { |
| server = op->server_list->servers[i].server; |
| if (server == cb_server) { |
| op->index = i; |
| goto found_interest; |
| } |
| } |
| |
| /* If we have a lock outstanding on a server that's no longer |
| * serving this vnode, then we can't switch to another server |
| * and have to return an error. |
| */ |
| if (op->flags & AFS_OPERATION_CUR_ONLY) { |
| op->error = -ESTALE; |
| return false; |
| } |
| |
| /* Note that the callback promise is effectively broken */ |
| write_seqlock(&vnode->cb_lock); |
| ASSERTCMP(cb_server, ==, vnode->cb_server); |
| vnode->cb_server = NULL; |
| if (test_and_clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) |
| vnode->cb_break++; |
| write_sequnlock(&vnode->cb_lock); |
| } |
| |
| found_interest: |
| return true; |
| } |
| |
| /* |
| * Post volume busy note. |
| */ |
| static void afs_busy(struct afs_volume *volume, u32 abort_code) |
| { |
| const char *m; |
| |
| switch (abort_code) { |
| case VOFFLINE: m = "offline"; break; |
| case VRESTARTING: m = "restarting"; break; |
| case VSALVAGING: m = "being salvaged"; break; |
| default: m = "busy"; break; |
| } |
| |
| pr_notice("kAFS: Volume %llu '%s' is %s\n", volume->vid, volume->name, m); |
| } |
| |
| /* |
| * Sleep and retry the operation to the same fileserver. |
| */ |
| static bool afs_sleep_and_retry(struct afs_operation *op) |
| { |
| if (!(op->flags & AFS_OPERATION_UNINTR)) { |
| msleep_interruptible(1000); |
| if (signal_pending(current)) { |
| op->error = -ERESTARTSYS; |
| return false; |
| } |
| } else { |
| msleep(1000); |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Select the fileserver to use. May be called multiple times to rotate |
| * through the fileservers. |
| */ |
| bool afs_select_fileserver(struct afs_operation *op) |
| { |
| struct afs_addr_list *alist; |
| struct afs_server *server; |
| struct afs_vnode *vnode = op->file[0].vnode; |
| struct afs_error e; |
| u32 rtt; |
| int error = op->ac.error, i; |
| |
| _enter("%lx[%d],%lx[%d],%d,%d", |
| op->untried, op->index, |
| op->ac.tried, op->ac.index, |
| error, op->ac.abort_code); |
| |
| if (op->flags & AFS_OPERATION_STOP) { |
| _leave(" = f [stopped]"); |
| return false; |
| } |
| |
| op->nr_iterations++; |
| |
| /* Evaluate the result of the previous operation, if there was one. */ |
| switch (error) { |
| case SHRT_MAX: |
| goto start; |
| |
| case 0: |
| default: |
| /* Success or local failure. Stop. */ |
| op->error = error; |
| op->flags |= AFS_OPERATION_STOP; |
| _leave(" = f [okay/local %d]", error); |
| return false; |
| |
| case -ECONNABORTED: |
| /* The far side rejected the operation on some grounds. This |
| * might involve the server being busy or the volume having been moved. |
| */ |
| switch (op->ac.abort_code) { |
| case VNOVOL: |
| /* This fileserver doesn't know about the volume. |
| * - May indicate that the VL is wrong - retry once and compare |
| * the results. |
| * - May indicate that the fileserver couldn't attach to the vol. |
| */ |
| if (op->flags & AFS_OPERATION_VNOVOL) { |
| op->error = -EREMOTEIO; |
| goto next_server; |
| } |
| |
| write_lock(&op->volume->servers_lock); |
| op->server_list->vnovol_mask |= 1 << op->index; |
| write_unlock(&op->volume->servers_lock); |
| |
| set_bit(AFS_VOLUME_NEEDS_UPDATE, &op->volume->flags); |
| error = afs_check_volume_status(op->volume, op); |
| if (error < 0) |
| goto failed_set_error; |
| |
| if (test_bit(AFS_VOLUME_DELETED, &op->volume->flags)) { |
| op->error = -ENOMEDIUM; |
| goto failed; |
| } |
| |
| /* If the server list didn't change, then assume that |
| * it's the fileserver having trouble. |
| */ |
| if (rcu_access_pointer(op->volume->servers) == op->server_list) { |
| op->error = -EREMOTEIO; |
| goto next_server; |
| } |
| |
| /* Try again */ |
| op->flags |= AFS_OPERATION_VNOVOL; |
| _leave(" = t [vnovol]"); |
| return true; |
| |
| case VSALVAGE: /* TODO: Should this return an error or iterate? */ |
| case VVOLEXISTS: |
| case VNOSERVICE: |
| case VONLINE: |
| case VDISKFULL: |
| case VOVERQUOTA: |
| op->error = afs_abort_to_error(op->ac.abort_code); |
| goto next_server; |
| |
| case VOFFLINE: |
| if (!test_and_set_bit(AFS_VOLUME_OFFLINE, &op->volume->flags)) { |
| afs_busy(op->volume, op->ac.abort_code); |
| clear_bit(AFS_VOLUME_BUSY, &op->volume->flags); |
| } |
| if (op->flags & AFS_OPERATION_NO_VSLEEP) { |
| op->error = -EADV; |
| goto failed; |
| } |
| if (op->flags & AFS_OPERATION_CUR_ONLY) { |
| op->error = -ESTALE; |
| goto failed; |
| } |
| goto busy; |
| |
| case VSALVAGING: |
| case VRESTARTING: |
| case VBUSY: |
| /* Retry after going round all the servers unless we |
| * have a file lock we need to maintain. |
| */ |
| if (op->flags & AFS_OPERATION_NO_VSLEEP) { |
| op->error = -EBUSY; |
| goto failed; |
| } |
| if (!test_and_set_bit(AFS_VOLUME_BUSY, &op->volume->flags)) { |
| afs_busy(op->volume, op->ac.abort_code); |
| clear_bit(AFS_VOLUME_OFFLINE, &op->volume->flags); |
| } |
| busy: |
| if (op->flags & AFS_OPERATION_CUR_ONLY) { |
| if (!afs_sleep_and_retry(op)) |
| goto failed; |
| |
| /* Retry with same server & address */ |
| _leave(" = t [vbusy]"); |
| return true; |
| } |
| |
| op->flags |= AFS_OPERATION_VBUSY; |
| goto next_server; |
| |
| case VMOVED: |
| /* The volume migrated to another server. We consider |
| * consider all locks and callbacks broken and request |
| * an update from the VLDB. |
| * |
| * We also limit the number of VMOVED hops we will |
| * honour, just in case someone sets up a loop. |
| */ |
| if (op->flags & AFS_OPERATION_VMOVED) { |
| op->error = -EREMOTEIO; |
| goto failed; |
| } |
| op->flags |= AFS_OPERATION_VMOVED; |
| |
| set_bit(AFS_VOLUME_WAIT, &op->volume->flags); |
| set_bit(AFS_VOLUME_NEEDS_UPDATE, &op->volume->flags); |
| error = afs_check_volume_status(op->volume, op); |
| if (error < 0) |
| goto failed_set_error; |
| |
| /* If the server list didn't change, then the VLDB is |
| * out of sync with the fileservers. This is hopefully |
| * a temporary condition, however, so we don't want to |
| * permanently block access to the file. |
| * |
| * TODO: Try other fileservers if we can. |
| * |
| * TODO: Retry a few times with sleeps. |
| */ |
| if (rcu_access_pointer(op->volume->servers) == op->server_list) { |
| op->error = -ENOMEDIUM; |
| goto failed; |
| } |
| |
| goto restart_from_beginning; |
| |
| default: |
| clear_bit(AFS_VOLUME_OFFLINE, &op->volume->flags); |
| clear_bit(AFS_VOLUME_BUSY, &op->volume->flags); |
| op->error = afs_abort_to_error(op->ac.abort_code); |
| goto failed; |
| } |
| |
| case -ETIMEDOUT: |
| case -ETIME: |
| if (op->error != -EDESTADDRREQ) |
| goto iterate_address; |
| fallthrough; |
| case -ERFKILL: |
| case -EADDRNOTAVAIL: |
| case -ENETUNREACH: |
| case -EHOSTUNREACH: |
| case -EHOSTDOWN: |
| case -ECONNREFUSED: |
| _debug("no conn"); |
| op->error = error; |
| goto iterate_address; |
| |
| case -ECONNRESET: |
| _debug("call reset"); |
| op->error = error; |
| goto failed; |
| } |
| |
| restart_from_beginning: |
| _debug("restart"); |
| afs_end_cursor(&op->ac); |
| op->server = NULL; |
| afs_put_serverlist(op->net, op->server_list); |
| op->server_list = NULL; |
| start: |
| _debug("start"); |
| /* See if we need to do an update of the volume record. Note that the |
| * volume may have moved or even have been deleted. |
| */ |
| error = afs_check_volume_status(op->volume, op); |
| if (error < 0) |
| goto failed_set_error; |
| |
| if (!afs_start_fs_iteration(op, vnode)) |
| goto failed; |
| |
| _debug("__ VOL %llx __", op->volume->vid); |
| |
| pick_server: |
| _debug("pick [%lx]", op->untried); |
| |
| error = afs_wait_for_fs_probes(op->server_list, op->untried); |
| if (error < 0) |
| goto failed_set_error; |
| |
| /* Pick the untried server with the lowest RTT. If we have outstanding |
| * callbacks, we stick with the server we're already using if we can. |
| */ |
| if (op->server) { |
| _debug("server %u", op->index); |
| if (test_bit(op->index, &op->untried)) |
| goto selected_server; |
| op->server = NULL; |
| _debug("no server"); |
| } |
| |
| op->index = -1; |
| rtt = U32_MAX; |
| for (i = 0; i < op->server_list->nr_servers; i++) { |
| struct afs_server *s = op->server_list->servers[i].server; |
| |
| if (!test_bit(i, &op->untried) || |
| !test_bit(AFS_SERVER_FL_RESPONDING, &s->flags)) |
| continue; |
| if (s->probe.rtt < rtt) { |
| op->index = i; |
| rtt = s->probe.rtt; |
| } |
| } |
| |
| if (op->index == -1) |
| goto no_more_servers; |
| |
| selected_server: |
| _debug("use %d", op->index); |
| __clear_bit(op->index, &op->untried); |
| |
| /* We're starting on a different fileserver from the list. We need to |
| * check it, create a callback intercept, find its address list and |
| * probe its capabilities before we use it. |
| */ |
| ASSERTCMP(op->ac.alist, ==, NULL); |
| server = op->server_list->servers[op->index].server; |
| |
| if (!afs_check_server_record(op, server)) |
| goto failed; |
| |
| _debug("USING SERVER: %pU", &server->uuid); |
| |
| op->flags |= AFS_OPERATION_RETRY_SERVER; |
| op->server = server; |
| if (vnode->cb_server != server) { |
| vnode->cb_server = server; |
| vnode->cb_s_break = server->cb_s_break; |
| vnode->cb_fs_s_break = atomic_read(&server->cell->fs_s_break); |
| vnode->cb_v_break = vnode->volume->cb_v_break; |
| clear_bit(AFS_VNODE_CB_PROMISED, &vnode->flags); |
| } |
| |
| read_lock(&server->fs_lock); |
| alist = rcu_dereference_protected(server->addresses, |
| lockdep_is_held(&server->fs_lock)); |
| afs_get_addrlist(alist); |
| read_unlock(&server->fs_lock); |
| |
| retry_server: |
| memset(&op->ac, 0, sizeof(op->ac)); |
| |
| if (!op->ac.alist) |
| op->ac.alist = alist; |
| else |
| afs_put_addrlist(alist); |
| |
| op->ac.index = -1; |
| |
| iterate_address: |
| ASSERT(op->ac.alist); |
| /* Iterate over the current server's address list to try and find an |
| * address on which it will respond to us. |
| */ |
| if (!afs_iterate_addresses(&op->ac)) |
| goto out_of_addresses; |
| |
| _debug("address [%u] %u/%u %pISp", |
| op->index, op->ac.index, op->ac.alist->nr_addrs, |
| &op->ac.alist->addrs[op->ac.index].transport); |
| |
| _leave(" = t"); |
| return true; |
| |
| out_of_addresses: |
| /* We've now had a failure to respond on all of a server's addresses - |
| * immediately probe them again and consider retrying the server. |
| */ |
| afs_probe_fileserver(op->net, op->server); |
| if (op->flags & AFS_OPERATION_RETRY_SERVER) { |
| alist = op->ac.alist; |
| error = afs_wait_for_one_fs_probe( |
| op->server, !(op->flags & AFS_OPERATION_UNINTR)); |
| switch (error) { |
| case 0: |
| op->flags &= ~AFS_OPERATION_RETRY_SERVER; |
| goto retry_server; |
| case -ERESTARTSYS: |
| goto failed_set_error; |
| case -ETIME: |
| case -EDESTADDRREQ: |
| goto next_server; |
| } |
| } |
| |
| next_server: |
| _debug("next"); |
| afs_end_cursor(&op->ac); |
| goto pick_server; |
| |
| no_more_servers: |
| /* That's all the servers poked to no good effect. Try again if some |
| * of them were busy. |
| */ |
| if (op->flags & AFS_OPERATION_VBUSY) |
| goto restart_from_beginning; |
| |
| e.error = -EDESTADDRREQ; |
| e.responded = false; |
| for (i = 0; i < op->server_list->nr_servers; i++) { |
| struct afs_server *s = op->server_list->servers[i].server; |
| |
| afs_prioritise_error(&e, READ_ONCE(s->probe.error), |
| s->probe.abort_code); |
| } |
| |
| error = e.error; |
| |
| failed_set_error: |
| op->error = error; |
| failed: |
| op->flags |= AFS_OPERATION_STOP; |
| afs_end_cursor(&op->ac); |
| _leave(" = f [failed %d]", op->error); |
| return false; |
| } |
| |
| /* |
| * Dump cursor state in the case of the error being EDESTADDRREQ. |
| */ |
| void afs_dump_edestaddrreq(const struct afs_operation *op) |
| { |
| static int count; |
| int i; |
| |
| if (!IS_ENABLED(CONFIG_AFS_DEBUG_CURSOR) || count > 3) |
| return; |
| count++; |
| |
| rcu_read_lock(); |
| |
| pr_notice("EDESTADDR occurred\n"); |
| pr_notice("FC: cbb=%x cbb2=%x fl=%x err=%hd\n", |
| op->file[0].cb_break_before, |
| op->file[1].cb_break_before, op->flags, op->error); |
| pr_notice("FC: ut=%lx ix=%d ni=%u\n", |
| op->untried, op->index, op->nr_iterations); |
| |
| if (op->server_list) { |
| const struct afs_server_list *sl = op->server_list; |
| pr_notice("FC: SL nr=%u pr=%u vnov=%hx\n", |
| sl->nr_servers, sl->preferred, sl->vnovol_mask); |
| for (i = 0; i < sl->nr_servers; i++) { |
| const struct afs_server *s = sl->servers[i].server; |
| pr_notice("FC: server fl=%lx av=%u %pU\n", |
| s->flags, s->addr_version, &s->uuid); |
| if (s->addresses) { |
| const struct afs_addr_list *a = |
| rcu_dereference(s->addresses); |
| pr_notice("FC: - av=%u nr=%u/%u/%u pr=%u\n", |
| a->version, |
| a->nr_ipv4, a->nr_addrs, a->max_addrs, |
| a->preferred); |
| pr_notice("FC: - R=%lx F=%lx\n", |
| a->responded, a->failed); |
| if (a == op->ac.alist) |
| pr_notice("FC: - current\n"); |
| } |
| } |
| } |
| |
| pr_notice("AC: t=%lx ax=%u ac=%d er=%d r=%u ni=%u\n", |
| op->ac.tried, op->ac.index, op->ac.abort_code, op->ac.error, |
| op->ac.responded, op->ac.nr_iterations); |
| rcu_read_unlock(); |
| } |