| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // General Purpose SPI multiplexer |
| |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mux/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| |
| #define SPI_MUX_NO_CS ((unsigned int)-1) |
| |
| /** |
| * DOC: Driver description |
| * |
| * This driver supports a MUX on an SPI bus. This can be useful when you need |
| * more chip selects than the hardware peripherals support, or than are |
| * available in a particular board setup. |
| * |
| * The driver will create an additional SPI controller. Devices added under the |
| * mux will be handled as 'chip selects' on this controller. |
| */ |
| |
| /** |
| * struct spi_mux_priv - the basic spi_mux structure |
| * @spi: pointer to the device struct attached to the parent |
| * spi controller |
| * @current_cs: The current chip select set in the mux |
| * @child_msg_complete: The mux replaces the complete callback in the child's |
| * message to its own callback; this field is used by the |
| * driver to store the child's callback during a transfer |
| * @child_msg_context: Used to store the child's context to the callback |
| * @child_msg_dev: Used to store the spi_device pointer to the child |
| * @mux: mux_control structure used to provide chip selects for |
| * downstream spi devices |
| */ |
| struct spi_mux_priv { |
| struct spi_device *spi; |
| unsigned int current_cs; |
| |
| void (*child_msg_complete)(void *context); |
| void *child_msg_context; |
| struct spi_device *child_msg_dev; |
| struct mux_control *mux; |
| }; |
| |
| /* should not get called when the parent controller is doing a transfer */ |
| static int spi_mux_select(struct spi_device *spi) |
| { |
| struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); |
| int ret; |
| |
| ret = mux_control_select(priv->mux, spi->chip_select); |
| if (ret) |
| return ret; |
| |
| if (priv->current_cs == spi->chip_select) |
| return 0; |
| |
| dev_dbg(&priv->spi->dev, "setting up the mux for cs %d\n", |
| spi->chip_select); |
| |
| /* copy the child device's settings except for the cs */ |
| priv->spi->max_speed_hz = spi->max_speed_hz; |
| priv->spi->mode = spi->mode; |
| priv->spi->bits_per_word = spi->bits_per_word; |
| |
| priv->current_cs = spi->chip_select; |
| |
| return 0; |
| } |
| |
| static int spi_mux_setup(struct spi_device *spi) |
| { |
| struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); |
| |
| /* |
| * can be called multiple times, won't do a valid setup now but we will |
| * change the settings when we do a transfer (necessary because we |
| * can't predict from which device it will be anyway) |
| */ |
| return spi_setup(priv->spi); |
| } |
| |
| static void spi_mux_complete_cb(void *context) |
| { |
| struct spi_mux_priv *priv = (struct spi_mux_priv *)context; |
| struct spi_controller *ctlr = spi_get_drvdata(priv->spi); |
| struct spi_message *m = ctlr->cur_msg; |
| |
| m->complete = priv->child_msg_complete; |
| m->context = priv->child_msg_context; |
| m->spi = priv->child_msg_dev; |
| spi_finalize_current_message(ctlr); |
| mux_control_deselect(priv->mux); |
| } |
| |
| static int spi_mux_transfer_one_message(struct spi_controller *ctlr, |
| struct spi_message *m) |
| { |
| struct spi_mux_priv *priv = spi_controller_get_devdata(ctlr); |
| struct spi_device *spi = m->spi; |
| int ret; |
| |
| ret = spi_mux_select(spi); |
| if (ret) |
| return ret; |
| |
| /* |
| * Replace the complete callback, context and spi_device with our own |
| * pointers. Save originals |
| */ |
| priv->child_msg_complete = m->complete; |
| priv->child_msg_context = m->context; |
| priv->child_msg_dev = m->spi; |
| |
| m->complete = spi_mux_complete_cb; |
| m->context = priv; |
| m->spi = priv->spi; |
| |
| /* do the transfer */ |
| return spi_async(priv->spi, m); |
| } |
| |
| static int spi_mux_probe(struct spi_device *spi) |
| { |
| struct spi_controller *ctlr; |
| struct spi_mux_priv *priv; |
| int ret; |
| |
| ctlr = spi_alloc_master(&spi->dev, sizeof(*priv)); |
| if (!ctlr) |
| return -ENOMEM; |
| |
| spi_set_drvdata(spi, ctlr); |
| priv = spi_controller_get_devdata(ctlr); |
| priv->spi = spi; |
| |
| /* |
| * Increase lockdep class as these lock are taken while the parent bus |
| * already holds their instance's lock. |
| */ |
| lockdep_set_subclass(&ctlr->io_mutex, 1); |
| lockdep_set_subclass(&ctlr->add_lock, 1); |
| |
| priv->mux = devm_mux_control_get(&spi->dev, NULL); |
| if (IS_ERR(priv->mux)) { |
| ret = dev_err_probe(&spi->dev, PTR_ERR(priv->mux), |
| "failed to get control-mux\n"); |
| goto err_put_ctlr; |
| } |
| |
| priv->current_cs = SPI_MUX_NO_CS; |
| |
| /* supported modes are the same as our parent's */ |
| ctlr->mode_bits = spi->controller->mode_bits; |
| ctlr->flags = spi->controller->flags; |
| ctlr->transfer_one_message = spi_mux_transfer_one_message; |
| ctlr->setup = spi_mux_setup; |
| ctlr->num_chipselect = mux_control_states(priv->mux); |
| ctlr->bus_num = -1; |
| ctlr->dev.of_node = spi->dev.of_node; |
| |
| ret = devm_spi_register_controller(&spi->dev, ctlr); |
| if (ret) |
| goto err_put_ctlr; |
| |
| return 0; |
| |
| err_put_ctlr: |
| spi_controller_put(ctlr); |
| |
| return ret; |
| } |
| |
| static const struct spi_device_id spi_mux_id[] = { |
| { "spi-mux" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, spi_mux_id); |
| |
| static const struct of_device_id spi_mux_of_match[] = { |
| { .compatible = "spi-mux" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, spi_mux_of_match); |
| |
| static struct spi_driver spi_mux_driver = { |
| .probe = spi_mux_probe, |
| .driver = { |
| .name = "spi-mux", |
| .of_match_table = spi_mux_of_match, |
| }, |
| .id_table = spi_mux_id, |
| }; |
| |
| module_spi_driver(spi_mux_driver); |
| |
| MODULE_DESCRIPTION("SPI multiplexer"); |
| MODULE_LICENSE("GPL"); |