| /****************************************************************************** | 
 |  * | 
 |  * This file is provided under a dual BSD/GPLv2 license.  When using or | 
 |  * redistributing this file, you may do so under either license. | 
 |  * | 
 |  * GPL LICENSE SUMMARY | 
 |  * | 
 |  * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of version 2 of the GNU General Public License as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | 
 |  * USA | 
 |  * | 
 |  * The full GNU General Public License is included in this distribution | 
 |  * in the file called COPYING. | 
 |  * | 
 |  * Contact Information: | 
 |  *  Intel Linux Wireless <ilw@linux.intel.com> | 
 |  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
 |  * | 
 |  * BSD LICENSE | 
 |  * | 
 |  * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * | 
 |  *  * Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer. | 
 |  *  * Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in | 
 |  *    the documentation and/or other materials provided with the | 
 |  *    distribution. | 
 |  *  * Neither the name Intel Corporation nor the names of its | 
 |  *    contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
 |  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | 
 |  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
 |  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
 |  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
 |  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | 
 |  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | 
 |  * | 
 |  *****************************************************************************/ | 
 | #include <linux/completion.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/firmware.h> | 
 | #include <linux/module.h> | 
 | #include <linux/vmalloc.h> | 
 |  | 
 | #include "iwl-drv.h" | 
 | #include "iwl-debug.h" | 
 | #include "iwl-trans.h" | 
 | #include "iwl-op-mode.h" | 
 | #include "iwl-agn-hw.h" | 
 | #include "iwl-fw.h" | 
 | #include "iwl-config.h" | 
 | #include "iwl-modparams.h" | 
 |  | 
 | /* private includes */ | 
 | #include "iwl-fw-file.h" | 
 |  | 
 | /****************************************************************************** | 
 |  * | 
 |  * module boiler plate | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | /* | 
 |  * module name, copyright, version, etc. | 
 |  */ | 
 | #define DRV_DESCRIPTION	"Intel(R) Wireless WiFi driver for Linux" | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | #define VD "d" | 
 | #else | 
 | #define VD | 
 | #endif | 
 |  | 
 | #define DRV_VERSION     IWLWIFI_VERSION VD | 
 |  | 
 | MODULE_DESCRIPTION(DRV_DESCRIPTION); | 
 | MODULE_VERSION(DRV_VERSION); | 
 | MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | static struct dentry *iwl_dbgfs_root; | 
 | #endif | 
 |  | 
 | /** | 
 |  * struct iwl_drv - drv common data | 
 |  * @list: list of drv structures using this opmode | 
 |  * @fw: the iwl_fw structure | 
 |  * @op_mode: the running op_mode | 
 |  * @trans: transport layer | 
 |  * @dev: for debug prints only | 
 |  * @cfg: configuration struct | 
 |  * @fw_index: firmware revision to try loading | 
 |  * @firmware_name: composite filename of ucode file to load | 
 |  * @request_firmware_complete: the firmware has been obtained from user space | 
 |  */ | 
 | struct iwl_drv { | 
 | 	struct list_head list; | 
 | 	struct iwl_fw fw; | 
 |  | 
 | 	struct iwl_op_mode *op_mode; | 
 | 	struct iwl_trans *trans; | 
 | 	struct device *dev; | 
 | 	const struct iwl_cfg *cfg; | 
 |  | 
 | 	int fw_index;                   /* firmware we're trying to load */ | 
 | 	char firmware_name[25];         /* name of firmware file to load */ | 
 |  | 
 | 	struct completion request_firmware_complete; | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	struct dentry *dbgfs_drv; | 
 | 	struct dentry *dbgfs_trans; | 
 | 	struct dentry *dbgfs_op_mode; | 
 | #endif | 
 | }; | 
 |  | 
 | enum { | 
 | 	DVM_OP_MODE =	0, | 
 | 	MVM_OP_MODE =	1, | 
 | }; | 
 |  | 
 | /* Protects the table contents, i.e. the ops pointer & drv list */ | 
 | static struct mutex iwlwifi_opmode_table_mtx; | 
 | static struct iwlwifi_opmode_table { | 
 | 	const char *name;			/* name: iwldvm, iwlmvm, etc */ | 
 | 	const struct iwl_op_mode_ops *ops;	/* pointer to op_mode ops */ | 
 | 	struct list_head drv;		/* list of devices using this op_mode */ | 
 | } iwlwifi_opmode_table[] = {		/* ops set when driver is initialized */ | 
 | 	[DVM_OP_MODE] = { .name = "iwldvm", .ops = NULL }, | 
 | 	[MVM_OP_MODE] = { .name = "iwlmvm", .ops = NULL }, | 
 | }; | 
 |  | 
 | /* | 
 |  * struct fw_sec: Just for the image parsing proccess. | 
 |  * For the fw storage we are using struct fw_desc. | 
 |  */ | 
 | struct fw_sec { | 
 | 	const void *data;		/* the sec data */ | 
 | 	size_t size;			/* section size */ | 
 | 	u32 offset;			/* offset of writing in the device */ | 
 | }; | 
 |  | 
 | static void iwl_free_fw_desc(struct iwl_drv *drv, struct fw_desc *desc) | 
 | { | 
 | 	vfree(desc->data); | 
 | 	desc->data = NULL; | 
 | 	desc->len = 0; | 
 | } | 
 |  | 
 | static void iwl_free_fw_img(struct iwl_drv *drv, struct fw_img *img) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < IWL_UCODE_SECTION_MAX; i++) | 
 | 		iwl_free_fw_desc(drv, &img->sec[i]); | 
 | } | 
 |  | 
 | static void iwl_dealloc_ucode(struct iwl_drv *drv) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) | 
 | 		iwl_free_fw_img(drv, drv->fw.img + i); | 
 | } | 
 |  | 
 | static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc, | 
 | 			     struct fw_sec *sec) | 
 | { | 
 | 	void *data; | 
 |  | 
 | 	desc->data = NULL; | 
 |  | 
 | 	if (!sec || !sec->size) | 
 | 		return -EINVAL; | 
 |  | 
 | 	data = vmalloc(sec->size); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	desc->len = sec->size; | 
 | 	desc->offset = sec->offset; | 
 | 	memcpy(data, sec->data, desc->len); | 
 | 	desc->data = data; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void iwl_req_fw_callback(const struct firmware *ucode_raw, | 
 | 				void *context); | 
 |  | 
 | #define UCODE_EXPERIMENTAL_INDEX	100 | 
 | #define UCODE_EXPERIMENTAL_TAG		"exp" | 
 |  | 
 | static int iwl_request_firmware(struct iwl_drv *drv, bool first) | 
 | { | 
 | 	const char *name_pre = drv->cfg->fw_name_pre; | 
 | 	char tag[8]; | 
 |  | 
 | 	if (first) { | 
 | #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE | 
 | 		drv->fw_index = UCODE_EXPERIMENTAL_INDEX; | 
 | 		strcpy(tag, UCODE_EXPERIMENTAL_TAG); | 
 | 	} else if (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) { | 
 | #endif | 
 | 		drv->fw_index = drv->cfg->ucode_api_max; | 
 | 		sprintf(tag, "%d", drv->fw_index); | 
 | 	} else { | 
 | 		drv->fw_index--; | 
 | 		sprintf(tag, "%d", drv->fw_index); | 
 | 	} | 
 |  | 
 | 	if (drv->fw_index < drv->cfg->ucode_api_min) { | 
 | 		IWL_ERR(drv, "no suitable firmware found!\n"); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	sprintf(drv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); | 
 |  | 
 | 	IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", | 
 | 		       (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) | 
 | 				? "EXPERIMENTAL " : "", | 
 | 		       drv->firmware_name); | 
 |  | 
 | 	return request_firmware_nowait(THIS_MODULE, 1, drv->firmware_name, | 
 | 				       drv->trans->dev, | 
 | 				       GFP_KERNEL, drv, iwl_req_fw_callback); | 
 | } | 
 |  | 
 | struct fw_img_parsing { | 
 | 	struct fw_sec sec[IWL_UCODE_SECTION_MAX]; | 
 | 	int sec_counter; | 
 | }; | 
 |  | 
 | /* | 
 |  * struct fw_sec_parsing: to extract fw section and it's offset from tlv | 
 |  */ | 
 | struct fw_sec_parsing { | 
 | 	__le32 offset; | 
 | 	const u8 data[]; | 
 | } __packed; | 
 |  | 
 | /** | 
 |  * struct iwl_tlv_calib_data - parse the default calib data from TLV | 
 |  * | 
 |  * @ucode_type: the uCode to which the following default calib relates. | 
 |  * @calib: default calibrations. | 
 |  */ | 
 | struct iwl_tlv_calib_data { | 
 | 	__le32 ucode_type; | 
 | 	struct iwl_tlv_calib_ctrl calib; | 
 | } __packed; | 
 |  | 
 | struct iwl_firmware_pieces { | 
 | 	struct fw_img_parsing img[IWL_UCODE_TYPE_MAX]; | 
 |  | 
 | 	u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; | 
 | 	u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; | 
 | }; | 
 |  | 
 | /* | 
 |  * These functions are just to extract uCode section data from the pieces | 
 |  * structure. | 
 |  */ | 
 | static struct fw_sec *get_sec(struct iwl_firmware_pieces *pieces, | 
 | 			      enum iwl_ucode_type type, | 
 | 			      int  sec) | 
 | { | 
 | 	return &pieces->img[type].sec[sec]; | 
 | } | 
 |  | 
 | static void set_sec_data(struct iwl_firmware_pieces *pieces, | 
 | 			 enum iwl_ucode_type type, | 
 | 			 int sec, | 
 | 			 const void *data) | 
 | { | 
 | 	pieces->img[type].sec[sec].data = data; | 
 | } | 
 |  | 
 | static void set_sec_size(struct iwl_firmware_pieces *pieces, | 
 | 			 enum iwl_ucode_type type, | 
 | 			 int sec, | 
 | 			 size_t size) | 
 | { | 
 | 	pieces->img[type].sec[sec].size = size; | 
 | } | 
 |  | 
 | static size_t get_sec_size(struct iwl_firmware_pieces *pieces, | 
 | 			   enum iwl_ucode_type type, | 
 | 			   int sec) | 
 | { | 
 | 	return pieces->img[type].sec[sec].size; | 
 | } | 
 |  | 
 | static void set_sec_offset(struct iwl_firmware_pieces *pieces, | 
 | 			   enum iwl_ucode_type type, | 
 | 			   int sec, | 
 | 			   u32 offset) | 
 | { | 
 | 	pieces->img[type].sec[sec].offset = offset; | 
 | } | 
 |  | 
 | /* | 
 |  * Gets uCode section from tlv. | 
 |  */ | 
 | static int iwl_store_ucode_sec(struct iwl_firmware_pieces *pieces, | 
 | 			       const void *data, enum iwl_ucode_type type, | 
 | 			       int size) | 
 | { | 
 | 	struct fw_img_parsing *img; | 
 | 	struct fw_sec *sec; | 
 | 	struct fw_sec_parsing *sec_parse; | 
 |  | 
 | 	if (WARN_ON(!pieces || !data || type >= IWL_UCODE_TYPE_MAX)) | 
 | 		return -1; | 
 |  | 
 | 	sec_parse = (struct fw_sec_parsing *)data; | 
 |  | 
 | 	img = &pieces->img[type]; | 
 | 	sec = &img->sec[img->sec_counter]; | 
 |  | 
 | 	sec->offset = le32_to_cpu(sec_parse->offset); | 
 | 	sec->data = sec_parse->data; | 
 | 	sec->size = size - sizeof(sec_parse->offset); | 
 |  | 
 | 	++img->sec_counter; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iwl_set_default_calib(struct iwl_drv *drv, const u8 *data) | 
 | { | 
 | 	struct iwl_tlv_calib_data *def_calib = | 
 | 					(struct iwl_tlv_calib_data *)data; | 
 | 	u32 ucode_type = le32_to_cpu(def_calib->ucode_type); | 
 | 	if (ucode_type >= IWL_UCODE_TYPE_MAX) { | 
 | 		IWL_ERR(drv, "Wrong ucode_type %u for default calibration.\n", | 
 | 			ucode_type); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	drv->fw.default_calib[ucode_type].flow_trigger = | 
 | 		def_calib->calib.flow_trigger; | 
 | 	drv->fw.default_calib[ucode_type].event_trigger = | 
 | 		def_calib->calib.event_trigger; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iwl_parse_v1_v2_firmware(struct iwl_drv *drv, | 
 | 				    const struct firmware *ucode_raw, | 
 | 				    struct iwl_firmware_pieces *pieces) | 
 | { | 
 | 	struct iwl_ucode_header *ucode = (void *)ucode_raw->data; | 
 | 	u32 api_ver, hdr_size, build; | 
 | 	char buildstr[25]; | 
 | 	const u8 *src; | 
 |  | 
 | 	drv->fw.ucode_ver = le32_to_cpu(ucode->ver); | 
 | 	api_ver = IWL_UCODE_API(drv->fw.ucode_ver); | 
 |  | 
 | 	switch (api_ver) { | 
 | 	default: | 
 | 		hdr_size = 28; | 
 | 		if (ucode_raw->size < hdr_size) { | 
 | 			IWL_ERR(drv, "File size too small!\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		build = le32_to_cpu(ucode->u.v2.build); | 
 | 		set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | 
 | 			     le32_to_cpu(ucode->u.v2.inst_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | 
 | 			     le32_to_cpu(ucode->u.v2.data_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | 
 | 			     le32_to_cpu(ucode->u.v2.init_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | 
 | 			     le32_to_cpu(ucode->u.v2.init_data_size)); | 
 | 		src = ucode->u.v2.data; | 
 | 		break; | 
 | 	case 0: | 
 | 	case 1: | 
 | 	case 2: | 
 | 		hdr_size = 24; | 
 | 		if (ucode_raw->size < hdr_size) { | 
 | 			IWL_ERR(drv, "File size too small!\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		build = 0; | 
 | 		set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | 
 | 			     le32_to_cpu(ucode->u.v1.inst_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | 
 | 			     le32_to_cpu(ucode->u.v1.data_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | 
 | 			     le32_to_cpu(ucode->u.v1.init_size)); | 
 | 		set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | 
 | 			     le32_to_cpu(ucode->u.v1.init_data_size)); | 
 | 		src = ucode->u.v1.data; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (build) | 
 | 		sprintf(buildstr, " build %u%s", build, | 
 | 		       (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) | 
 | 				? " (EXP)" : ""); | 
 | 	else | 
 | 		buildstr[0] = '\0'; | 
 |  | 
 | 	snprintf(drv->fw.fw_version, | 
 | 		 sizeof(drv->fw.fw_version), | 
 | 		 "%u.%u.%u.%u%s", | 
 | 		 IWL_UCODE_MAJOR(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_MINOR(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_API(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_SERIAL(drv->fw.ucode_ver), | 
 | 		 buildstr); | 
 |  | 
 | 	/* Verify size of file vs. image size info in file's header */ | 
 |  | 
 | 	if (ucode_raw->size != hdr_size + | 
 | 	    get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) + | 
 | 	    get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) + | 
 | 	    get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) + | 
 | 	    get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)) { | 
 |  | 
 | 		IWL_ERR(drv, | 
 | 			"uCode file size %d does not match expected size\n", | 
 | 			(int)ucode_raw->size); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 |  | 
 | 	set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, src); | 
 | 	src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST); | 
 | 	set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, | 
 | 		       IWLAGN_RTC_INST_LOWER_BOUND); | 
 | 	set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, src); | 
 | 	src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA); | 
 | 	set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, | 
 | 		       IWLAGN_RTC_DATA_LOWER_BOUND); | 
 | 	set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, src); | 
 | 	src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST); | 
 | 	set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, | 
 | 		       IWLAGN_RTC_INST_LOWER_BOUND); | 
 | 	set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, src); | 
 | 	src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA); | 
 | 	set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, | 
 | 		       IWLAGN_RTC_DATA_LOWER_BOUND); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iwl_parse_tlv_firmware(struct iwl_drv *drv, | 
 | 				const struct firmware *ucode_raw, | 
 | 				struct iwl_firmware_pieces *pieces, | 
 | 				struct iwl_ucode_capabilities *capa) | 
 | { | 
 | 	struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; | 
 | 	struct iwl_ucode_tlv *tlv; | 
 | 	size_t len = ucode_raw->size; | 
 | 	const u8 *data; | 
 | 	u32 tlv_len; | 
 | 	enum iwl_ucode_tlv_type tlv_type; | 
 | 	const u8 *tlv_data; | 
 | 	char buildstr[25]; | 
 | 	u32 build; | 
 |  | 
 | 	if (len < sizeof(*ucode)) { | 
 | 		IWL_ERR(drv, "uCode has invalid length: %zd\n", len); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { | 
 | 		IWL_ERR(drv, "invalid uCode magic: 0X%x\n", | 
 | 			le32_to_cpu(ucode->magic)); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	drv->fw.ucode_ver = le32_to_cpu(ucode->ver); | 
 | 	build = le32_to_cpu(ucode->build); | 
 |  | 
 | 	if (build) | 
 | 		sprintf(buildstr, " build %u%s", build, | 
 | 		       (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) | 
 | 				? " (EXP)" : ""); | 
 | 	else | 
 | 		buildstr[0] = '\0'; | 
 |  | 
 | 	snprintf(drv->fw.fw_version, | 
 | 		 sizeof(drv->fw.fw_version), | 
 | 		 "%u.%u.%u.%u%s", | 
 | 		 IWL_UCODE_MAJOR(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_MINOR(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_API(drv->fw.ucode_ver), | 
 | 		 IWL_UCODE_SERIAL(drv->fw.ucode_ver), | 
 | 		 buildstr); | 
 |  | 
 | 	data = ucode->data; | 
 |  | 
 | 	len -= sizeof(*ucode); | 
 |  | 
 | 	while (len >= sizeof(*tlv)) { | 
 | 		len -= sizeof(*tlv); | 
 | 		tlv = (void *)data; | 
 |  | 
 | 		tlv_len = le32_to_cpu(tlv->length); | 
 | 		tlv_type = le32_to_cpu(tlv->type); | 
 | 		tlv_data = tlv->data; | 
 |  | 
 | 		if (len < tlv_len) { | 
 | 			IWL_ERR(drv, "invalid TLV len: %zd/%u\n", | 
 | 				len, tlv_len); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 		len -= ALIGN(tlv_len, 4); | 
 | 		data += sizeof(*tlv) + ALIGN(tlv_len, 4); | 
 |  | 
 | 		switch (tlv_type) { | 
 | 		case IWL_UCODE_TLV_INST: | 
 | 			set_sec_data(pieces, IWL_UCODE_REGULAR, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_REGULAR, | 
 | 				       IWL_UCODE_SECTION_INST, | 
 | 				       IWLAGN_RTC_INST_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_DATA: | 
 | 			set_sec_data(pieces, IWL_UCODE_REGULAR, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_REGULAR, | 
 | 				       IWL_UCODE_SECTION_DATA, | 
 | 				       IWLAGN_RTC_DATA_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_INIT: | 
 | 			set_sec_data(pieces, IWL_UCODE_INIT, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_INIT, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_INIT, | 
 | 				       IWL_UCODE_SECTION_INST, | 
 | 				       IWLAGN_RTC_INST_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_INIT_DATA: | 
 | 			set_sec_data(pieces, IWL_UCODE_INIT, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_INIT, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_INIT, | 
 | 				       IWL_UCODE_SECTION_DATA, | 
 | 				       IWLAGN_RTC_DATA_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_BOOT: | 
 | 			IWL_ERR(drv, "Found unexpected BOOT ucode\n"); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_PROBE_MAX_LEN: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			capa->max_probe_length = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_PAN: | 
 | 			if (tlv_len) | 
 | 				goto invalid_tlv_len; | 
 | 			capa->flags |= IWL_UCODE_TLV_FLAGS_PAN; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_FLAGS: | 
 | 			/* must be at least one u32 */ | 
 | 			if (tlv_len < sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			/* and a proper number of u32s */ | 
 | 			if (tlv_len % sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			/* | 
 | 			 * This driver only reads the first u32 as | 
 | 			 * right now no more features are defined, | 
 | 			 * if that changes then either the driver | 
 | 			 * will not work with the new firmware, or | 
 | 			 * it'll not take advantage of new features. | 
 | 			 */ | 
 | 			capa->flags = le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_INIT_EVTLOG_PTR: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->init_evtlog_ptr = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->init_evtlog_size = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_INIT_ERRLOG_PTR: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->init_errlog_ptr = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->inst_evtlog_ptr = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->inst_evtlog_size = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			pieces->inst_errlog_ptr = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_ENHANCE_SENS_TBL: | 
 | 			if (tlv_len) | 
 | 				goto invalid_tlv_len; | 
 | 			drv->fw.enhance_sensitivity_table = true; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_WOWLAN_INST: | 
 | 			set_sec_data(pieces, IWL_UCODE_WOWLAN, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_WOWLAN, | 
 | 				     IWL_UCODE_SECTION_INST, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_WOWLAN, | 
 | 				       IWL_UCODE_SECTION_INST, | 
 | 				       IWLAGN_RTC_INST_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_WOWLAN_DATA: | 
 | 			set_sec_data(pieces, IWL_UCODE_WOWLAN, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_data); | 
 | 			set_sec_size(pieces, IWL_UCODE_WOWLAN, | 
 | 				     IWL_UCODE_SECTION_DATA, tlv_len); | 
 | 			set_sec_offset(pieces, IWL_UCODE_WOWLAN, | 
 | 				       IWL_UCODE_SECTION_DATA, | 
 | 				       IWLAGN_RTC_DATA_LOWER_BOUND); | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			capa->standard_phy_calibration_size = | 
 | 					le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		 case IWL_UCODE_TLV_SEC_RT: | 
 | 			iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_REGULAR, | 
 | 					    tlv_len); | 
 | 			drv->fw.mvm_fw = true; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_SEC_INIT: | 
 | 			iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_INIT, | 
 | 					    tlv_len); | 
 | 			drv->fw.mvm_fw = true; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_SEC_WOWLAN: | 
 | 			iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_WOWLAN, | 
 | 					    tlv_len); | 
 | 			drv->fw.mvm_fw = true; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_DEF_CALIB: | 
 | 			if (tlv_len != sizeof(struct iwl_tlv_calib_data)) | 
 | 				goto invalid_tlv_len; | 
 | 			if (iwl_set_default_calib(drv, tlv_data)) | 
 | 				goto tlv_error; | 
 | 			break; | 
 | 		case IWL_UCODE_TLV_PHY_SKU: | 
 | 			if (tlv_len != sizeof(u32)) | 
 | 				goto invalid_tlv_len; | 
 | 			drv->fw.phy_config = le32_to_cpup((__le32 *)tlv_data); | 
 | 			break; | 
 | 		default: | 
 | 			IWL_DEBUG_INFO(drv, "unknown TLV: %d\n", tlv_type); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (len) { | 
 | 		IWL_ERR(drv, "invalid TLV after parsing: %zd\n", len); | 
 | 		iwl_print_hex_dump(drv, IWL_DL_FW, (u8 *)data, len); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 |  invalid_tlv_len: | 
 | 	IWL_ERR(drv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); | 
 |  tlv_error: | 
 | 	iwl_print_hex_dump(drv, IWL_DL_FW, tlv_data, tlv_len); | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int iwl_alloc_ucode(struct iwl_drv *drv, | 
 | 			   struct iwl_firmware_pieces *pieces, | 
 | 			   enum iwl_ucode_type type) | 
 | { | 
 | 	int i; | 
 | 	for (i = 0; | 
 | 	     i < IWL_UCODE_SECTION_MAX && get_sec_size(pieces, type, i); | 
 | 	     i++) | 
 | 		if (iwl_alloc_fw_desc(drv, &(drv->fw.img[type].sec[i]), | 
 | 				      get_sec(pieces, type, i))) | 
 | 			return -ENOMEM; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int validate_sec_sizes(struct iwl_drv *drv, | 
 | 			      struct iwl_firmware_pieces *pieces, | 
 | 			      const struct iwl_cfg *cfg) | 
 | { | 
 | 	IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", | 
 | 		get_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 			     IWL_UCODE_SECTION_INST)); | 
 | 	IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", | 
 | 		get_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 			     IWL_UCODE_SECTION_DATA)); | 
 | 	IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", | 
 | 		get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); | 
 | 	IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", | 
 | 		get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); | 
 |  | 
 | 	/* Verify that uCode images will fit in card's SRAM. */ | 
 | 	if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > | 
 | 							cfg->max_inst_size) { | 
 | 		IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", | 
 | 			get_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 						IWL_UCODE_SECTION_INST)); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > | 
 | 							cfg->max_data_size) { | 
 | 		IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", | 
 | 			get_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 						IWL_UCODE_SECTION_DATA)); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	 if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) > | 
 | 							cfg->max_inst_size) { | 
 | 		IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n", | 
 | 			get_sec_size(pieces, IWL_UCODE_INIT, | 
 | 						IWL_UCODE_SECTION_INST)); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) > | 
 | 							cfg->max_data_size) { | 
 | 		IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n", | 
 | 			get_sec_size(pieces, IWL_UCODE_REGULAR, | 
 | 						IWL_UCODE_SECTION_DATA)); | 
 | 		return -1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct iwl_op_mode * | 
 | _iwl_op_mode_start(struct iwl_drv *drv, struct iwlwifi_opmode_table *op) | 
 | { | 
 | 	const struct iwl_op_mode_ops *ops = op->ops; | 
 | 	struct dentry *dbgfs_dir = NULL; | 
 | 	struct iwl_op_mode *op_mode = NULL; | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	drv->dbgfs_op_mode = debugfs_create_dir(op->name, | 
 | 						drv->dbgfs_drv); | 
 | 	if (!drv->dbgfs_op_mode) { | 
 | 		IWL_ERR(drv, | 
 | 			"failed to create opmode debugfs directory\n"); | 
 | 		return op_mode; | 
 | 	} | 
 | 	dbgfs_dir = drv->dbgfs_op_mode; | 
 | #endif | 
 |  | 
 | 	op_mode = ops->start(drv->trans, drv->cfg, &drv->fw, dbgfs_dir); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	if (!op_mode) { | 
 | 		debugfs_remove_recursive(drv->dbgfs_op_mode); | 
 | 		drv->dbgfs_op_mode = NULL; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	return op_mode; | 
 | } | 
 |  | 
 | static void _iwl_op_mode_stop(struct iwl_drv *drv) | 
 | { | 
 | 	/* op_mode can be NULL if its start failed */ | 
 | 	if (drv->op_mode) { | 
 | 		iwl_op_mode_stop(drv->op_mode); | 
 | 		drv->op_mode = NULL; | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 		debugfs_remove_recursive(drv->dbgfs_op_mode); | 
 | 		drv->dbgfs_op_mode = NULL; | 
 | #endif | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * iwl_req_fw_callback - callback when firmware was loaded | 
 |  * | 
 |  * If loaded successfully, copies the firmware into buffers | 
 |  * for the card to fetch (via DMA). | 
 |  */ | 
 | static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) | 
 | { | 
 | 	struct iwl_drv *drv = context; | 
 | 	struct iwl_fw *fw = &drv->fw; | 
 | 	struct iwl_ucode_header *ucode; | 
 | 	struct iwlwifi_opmode_table *op; | 
 | 	int err; | 
 | 	struct iwl_firmware_pieces pieces; | 
 | 	const unsigned int api_max = drv->cfg->ucode_api_max; | 
 | 	unsigned int api_ok = drv->cfg->ucode_api_ok; | 
 | 	const unsigned int api_min = drv->cfg->ucode_api_min; | 
 | 	u32 api_ver; | 
 | 	int i; | 
 | 	bool load_module = false; | 
 |  | 
 | 	fw->ucode_capa.max_probe_length = 200; | 
 | 	fw->ucode_capa.standard_phy_calibration_size = | 
 | 			IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; | 
 |  | 
 | 	if (!api_ok) | 
 | 		api_ok = api_max; | 
 |  | 
 | 	memset(&pieces, 0, sizeof(pieces)); | 
 |  | 
 | 	if (!ucode_raw) { | 
 | 		if (drv->fw_index <= api_ok) | 
 | 			IWL_ERR(drv, | 
 | 				"request for firmware file '%s' failed.\n", | 
 | 				drv->firmware_name); | 
 | 		goto try_again; | 
 | 	} | 
 |  | 
 | 	IWL_DEBUG_INFO(drv, "Loaded firmware file '%s' (%zd bytes).\n", | 
 | 		       drv->firmware_name, ucode_raw->size); | 
 |  | 
 | 	/* Make sure that we got at least the API version number */ | 
 | 	if (ucode_raw->size < 4) { | 
 | 		IWL_ERR(drv, "File size way too small!\n"); | 
 | 		goto try_again; | 
 | 	} | 
 |  | 
 | 	/* Data from ucode file:  header followed by uCode images */ | 
 | 	ucode = (struct iwl_ucode_header *)ucode_raw->data; | 
 |  | 
 | 	if (ucode->ver) | 
 | 		err = iwl_parse_v1_v2_firmware(drv, ucode_raw, &pieces); | 
 | 	else | 
 | 		err = iwl_parse_tlv_firmware(drv, ucode_raw, &pieces, | 
 | 					   &fw->ucode_capa); | 
 |  | 
 | 	if (err) | 
 | 		goto try_again; | 
 |  | 
 | 	api_ver = IWL_UCODE_API(drv->fw.ucode_ver); | 
 |  | 
 | 	/* | 
 | 	 * api_ver should match the api version forming part of the | 
 | 	 * firmware filename ... but we don't check for that and only rely | 
 | 	 * on the API version read from firmware header from here on forward | 
 | 	 */ | 
 | 	/* no api version check required for experimental uCode */ | 
 | 	if (drv->fw_index != UCODE_EXPERIMENTAL_INDEX) { | 
 | 		if (api_ver < api_min || api_ver > api_max) { | 
 | 			IWL_ERR(drv, | 
 | 				"Driver unable to support your firmware API. " | 
 | 				"Driver supports v%u, firmware is v%u.\n", | 
 | 				api_max, api_ver); | 
 | 			goto try_again; | 
 | 		} | 
 |  | 
 | 		if (api_ver < api_ok) { | 
 | 			if (api_ok != api_max) | 
 | 				IWL_ERR(drv, "Firmware has old API version, " | 
 | 					"expected v%u through v%u, got v%u.\n", | 
 | 					api_ok, api_max, api_ver); | 
 | 			else | 
 | 				IWL_ERR(drv, "Firmware has old API version, " | 
 | 					"expected v%u, got v%u.\n", | 
 | 					api_max, api_ver); | 
 | 			IWL_ERR(drv, "New firmware can be obtained from " | 
 | 				      "http://www.intellinuxwireless.org/.\n"); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * In mvm uCode there is no difference between data and instructions | 
 | 	 * sections. | 
 | 	 */ | 
 | 	if (!fw->mvm_fw && validate_sec_sizes(drv, &pieces, drv->cfg)) | 
 | 		goto try_again; | 
 |  | 
 | 	/* Allocate ucode buffers for card's bus-master loading ... */ | 
 |  | 
 | 	/* Runtime instructions and 2 copies of data: | 
 | 	 * 1) unmodified from disk | 
 | 	 * 2) backup cache for save/restore during power-downs */ | 
 | 	for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) | 
 | 		if (iwl_alloc_ucode(drv, &pieces, i)) | 
 | 			goto out_free_fw; | 
 |  | 
 | 	/* Now that we can no longer fail, copy information */ | 
 |  | 
 | 	/* | 
 | 	 * The (size - 16) / 12 formula is based on the information recorded | 
 | 	 * for each event, which is of mode 1 (including timestamp) for all | 
 | 	 * new microcodes that include this information. | 
 | 	 */ | 
 | 	fw->init_evtlog_ptr = pieces.init_evtlog_ptr; | 
 | 	if (pieces.init_evtlog_size) | 
 | 		fw->init_evtlog_size = (pieces.init_evtlog_size - 16)/12; | 
 | 	else | 
 | 		fw->init_evtlog_size = | 
 | 			drv->cfg->base_params->max_event_log_size; | 
 | 	fw->init_errlog_ptr = pieces.init_errlog_ptr; | 
 | 	fw->inst_evtlog_ptr = pieces.inst_evtlog_ptr; | 
 | 	if (pieces.inst_evtlog_size) | 
 | 		fw->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12; | 
 | 	else | 
 | 		fw->inst_evtlog_size = | 
 | 			drv->cfg->base_params->max_event_log_size; | 
 | 	fw->inst_errlog_ptr = pieces.inst_errlog_ptr; | 
 |  | 
 | 	/* | 
 | 	 * figure out the offset of chain noise reset and gain commands | 
 | 	 * base on the size of standard phy calibration commands table size | 
 | 	 */ | 
 | 	if (fw->ucode_capa.standard_phy_calibration_size > | 
 | 	    IWL_MAX_PHY_CALIBRATE_TBL_SIZE) | 
 | 		fw->ucode_capa.standard_phy_calibration_size = | 
 | 			IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; | 
 |  | 
 | 	/* We have our copies now, allow OS release its copies */ | 
 | 	release_firmware(ucode_raw); | 
 |  | 
 | 	mutex_lock(&iwlwifi_opmode_table_mtx); | 
 | 	if (fw->mvm_fw) | 
 | 		op = &iwlwifi_opmode_table[MVM_OP_MODE]; | 
 | 	else | 
 | 		op = &iwlwifi_opmode_table[DVM_OP_MODE]; | 
 |  | 
 | 	IWL_INFO(drv, "loaded firmware version %s op_mode %s\n", | 
 | 		 drv->fw.fw_version, op->name); | 
 |  | 
 | 	/* add this device to the list of devices using this op_mode */ | 
 | 	list_add_tail(&drv->list, &op->drv); | 
 |  | 
 | 	if (op->ops) { | 
 | 		drv->op_mode = _iwl_op_mode_start(drv, op); | 
 |  | 
 | 		if (!drv->op_mode) { | 
 | 			mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 | 			goto out_unbind; | 
 | 		} | 
 | 	} else { | 
 | 		load_module = true; | 
 | 	} | 
 | 	mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 |  | 
 | 	/* | 
 | 	 * Complete the firmware request last so that | 
 | 	 * a driver unbind (stop) doesn't run while we | 
 | 	 * are doing the start() above. | 
 | 	 */ | 
 | 	complete(&drv->request_firmware_complete); | 
 |  | 
 | 	/* | 
 | 	 * Load the module last so we don't block anything | 
 | 	 * else from proceeding if the module fails to load | 
 | 	 * or hangs loading. | 
 | 	 */ | 
 | 	if (load_module) { | 
 | 		err = request_module("%s", op->name); | 
 | 		if (err) | 
 | 			IWL_ERR(drv, | 
 | 				"failed to load module %s (error %d), is dynamic loading enabled?\n", | 
 | 				op->name, err); | 
 | 	} | 
 | 	return; | 
 |  | 
 |  try_again: | 
 | 	/* try next, if any */ | 
 | 	release_firmware(ucode_raw); | 
 | 	if (iwl_request_firmware(drv, false)) | 
 | 		goto out_unbind; | 
 | 	return; | 
 |  | 
 |  out_free_fw: | 
 | 	IWL_ERR(drv, "failed to allocate pci memory\n"); | 
 | 	iwl_dealloc_ucode(drv); | 
 | 	release_firmware(ucode_raw); | 
 |  out_unbind: | 
 | 	complete(&drv->request_firmware_complete); | 
 | 	device_release_driver(drv->trans->dev); | 
 | } | 
 |  | 
 | struct iwl_drv *iwl_drv_start(struct iwl_trans *trans, | 
 | 			      const struct iwl_cfg *cfg) | 
 | { | 
 | 	struct iwl_drv *drv; | 
 | 	int ret; | 
 |  | 
 | 	drv = kzalloc(sizeof(*drv), GFP_KERNEL); | 
 | 	if (!drv) | 
 | 		return NULL; | 
 |  | 
 | 	drv->trans = trans; | 
 | 	drv->dev = trans->dev; | 
 | 	drv->cfg = cfg; | 
 |  | 
 | 	init_completion(&drv->request_firmware_complete); | 
 | 	INIT_LIST_HEAD(&drv->list); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	/* Create the device debugfs entries. */ | 
 | 	drv->dbgfs_drv = debugfs_create_dir(dev_name(trans->dev), | 
 | 					    iwl_dbgfs_root); | 
 |  | 
 | 	if (!drv->dbgfs_drv) { | 
 | 		IWL_ERR(drv, "failed to create debugfs directory\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_drv; | 
 | 	} | 
 |  | 
 | 	/* Create transport layer debugfs dir */ | 
 | 	drv->trans->dbgfs_dir = debugfs_create_dir("trans", drv->dbgfs_drv); | 
 |  | 
 | 	if (!drv->trans->dbgfs_dir) { | 
 | 		IWL_ERR(drv, "failed to create transport debugfs directory\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto err_free_dbgfs; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	ret = iwl_request_firmware(drv, true); | 
 | 	if (ret) { | 
 | 		IWL_ERR(trans, "Couldn't request the fw\n"); | 
 | 		goto err_fw; | 
 | 	} | 
 |  | 
 | 	return drv; | 
 |  | 
 | err_fw: | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | err_free_dbgfs: | 
 | 	debugfs_remove_recursive(drv->dbgfs_drv); | 
 | err_free_drv: | 
 | #endif | 
 | 	kfree(drv); | 
 |  | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | void iwl_drv_stop(struct iwl_drv *drv) | 
 | { | 
 | 	wait_for_completion(&drv->request_firmware_complete); | 
 |  | 
 | 	_iwl_op_mode_stop(drv); | 
 |  | 
 | 	iwl_dealloc_ucode(drv); | 
 |  | 
 | 	mutex_lock(&iwlwifi_opmode_table_mtx); | 
 | 	/* | 
 | 	 * List is empty (this item wasn't added) | 
 | 	 * when firmware loading failed -- in that | 
 | 	 * case we can't remove it from any list. | 
 | 	 */ | 
 | 	if (!list_empty(&drv->list)) | 
 | 		list_del(&drv->list); | 
 | 	mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	debugfs_remove_recursive(drv->dbgfs_drv); | 
 | #endif | 
 |  | 
 | 	kfree(drv); | 
 | } | 
 |  | 
 |  | 
 | /* shared module parameters */ | 
 | struct iwl_mod_params iwlwifi_mod_params = { | 
 | 	.restart_fw = true, | 
 | 	.plcp_check = true, | 
 | 	.bt_coex_active = true, | 
 | 	.power_level = IWL_POWER_INDEX_1, | 
 | 	.bt_ch_announce = true, | 
 | 	.auto_agg = true, | 
 | 	.wd_disable = true, | 
 | 	/* the rest are 0 by default */ | 
 | }; | 
 | IWL_EXPORT_SYMBOL(iwlwifi_mod_params); | 
 |  | 
 | int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops) | 
 | { | 
 | 	int i; | 
 | 	struct iwl_drv *drv; | 
 | 	struct iwlwifi_opmode_table *op; | 
 |  | 
 | 	mutex_lock(&iwlwifi_opmode_table_mtx); | 
 | 	for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) { | 
 | 		op = &iwlwifi_opmode_table[i]; | 
 | 		if (strcmp(op->name, name)) | 
 | 			continue; | 
 | 		op->ops = ops; | 
 | 		/* TODO: need to handle exceptional case */ | 
 | 		list_for_each_entry(drv, &op->drv, list) | 
 | 			drv->op_mode = _iwl_op_mode_start(drv, op); | 
 |  | 
 | 		mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 | 		return 0; | 
 | 	} | 
 | 	mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 | 	return -EIO; | 
 | } | 
 | IWL_EXPORT_SYMBOL(iwl_opmode_register); | 
 |  | 
 | void iwl_opmode_deregister(const char *name) | 
 | { | 
 | 	int i; | 
 | 	struct iwl_drv *drv; | 
 |  | 
 | 	mutex_lock(&iwlwifi_opmode_table_mtx); | 
 | 	for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) { | 
 | 		if (strcmp(iwlwifi_opmode_table[i].name, name)) | 
 | 			continue; | 
 | 		iwlwifi_opmode_table[i].ops = NULL; | 
 |  | 
 | 		/* call the stop routine for all devices */ | 
 | 		list_for_each_entry(drv, &iwlwifi_opmode_table[i].drv, list) | 
 | 			_iwl_op_mode_stop(drv); | 
 |  | 
 | 		mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 | 		return; | 
 | 	} | 
 | 	mutex_unlock(&iwlwifi_opmode_table_mtx); | 
 | } | 
 | IWL_EXPORT_SYMBOL(iwl_opmode_deregister); | 
 |  | 
 | static int __init iwl_drv_init(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	mutex_init(&iwlwifi_opmode_table_mtx); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(iwlwifi_opmode_table); i++) | 
 | 		INIT_LIST_HEAD(&iwlwifi_opmode_table[i].drv); | 
 |  | 
 | 	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); | 
 | 	pr_info(DRV_COPYRIGHT "\n"); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	/* Create the root of iwlwifi debugfs subsystem. */ | 
 | 	iwl_dbgfs_root = debugfs_create_dir(DRV_NAME, NULL); | 
 |  | 
 | 	if (!iwl_dbgfs_root) | 
 | 		return -EFAULT; | 
 | #endif | 
 |  | 
 | 	return iwl_pci_register_driver(); | 
 | } | 
 | module_init(iwl_drv_init); | 
 |  | 
 | static void __exit iwl_drv_exit(void) | 
 | { | 
 | 	iwl_pci_unregister_driver(); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 | 	debugfs_remove_recursive(iwl_dbgfs_root); | 
 | #endif | 
 | } | 
 | module_exit(iwl_drv_exit); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | module_param_named(debug, iwlwifi_mod_params.debug_level, uint, | 
 | 		   S_IRUGO | S_IWUSR); | 
 | MODULE_PARM_DESC(debug, "debug output mask"); | 
 | #endif | 
 |  | 
 | module_param_named(swcrypto, iwlwifi_mod_params.sw_crypto, int, S_IRUGO); | 
 | MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); | 
 | module_param_named(11n_disable, iwlwifi_mod_params.disable_11n, uint, S_IRUGO); | 
 | MODULE_PARM_DESC(11n_disable, | 
 | 	"disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); | 
 | module_param_named(amsdu_size_8K, iwlwifi_mod_params.amsdu_size_8K, | 
 | 		   int, S_IRUGO); | 
 | MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0)"); | 
 | module_param_named(fw_restart, iwlwifi_mod_params.restart_fw, bool, S_IRUGO); | 
 | MODULE_PARM_DESC(fw_restart, "restart firmware in case of error (default true)"); | 
 |  | 
 | module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling, | 
 | 		   int, S_IRUGO); | 
 | MODULE_PARM_DESC(antenna_coupling, | 
 | 		 "specify antenna coupling in dB (defualt: 0 dB)"); | 
 |  | 
 | module_param_named(bt_ch_inhibition, iwlwifi_mod_params.bt_ch_announce, | 
 | 		   bool, S_IRUGO); | 
 | MODULE_PARM_DESC(bt_ch_inhibition, | 
 | 		 "Enable BT channel inhibition (default: enable)"); | 
 |  | 
 | module_param_named(plcp_check, iwlwifi_mod_params.plcp_check, bool, S_IRUGO); | 
 | MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); | 
 |  | 
 | module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO); | 
 | MODULE_PARM_DESC(wd_disable, | 
 | 		"Disable stuck queue watchdog timer 0=system default, " | 
 | 		"1=disable, 2=enable (default: 0)"); | 
 |  | 
 | /* | 
 |  * set bt_coex_active to true, uCode will do kill/defer | 
 |  * every time the priority line is asserted (BT is sending signals on the | 
 |  * priority line in the PCIx). | 
 |  * set bt_coex_active to false, uCode will ignore the BT activity and | 
 |  * perform the normal operation | 
 |  * | 
 |  * User might experience transmit issue on some platform due to WiFi/BT | 
 |  * co-exist problem. The possible behaviors are: | 
 |  *   Able to scan and finding all the available AP | 
 |  *   Not able to associate with any AP | 
 |  * On those platforms, WiFi communication can be restored by set | 
 |  * "bt_coex_active" module parameter to "false" | 
 |  * | 
 |  * default: bt_coex_active = true (BT_COEX_ENABLE) | 
 |  */ | 
 | module_param_named(bt_coex_active, iwlwifi_mod_params.bt_coex_active, | 
 | 		bool, S_IRUGO); | 
 | MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)"); | 
 |  | 
 | module_param_named(led_mode, iwlwifi_mod_params.led_mode, int, S_IRUGO); | 
 | MODULE_PARM_DESC(led_mode, "0=system default, " | 
 | 		"1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)"); | 
 |  | 
 | module_param_named(power_save, iwlwifi_mod_params.power_save, | 
 | 		bool, S_IRUGO); | 
 | MODULE_PARM_DESC(power_save, | 
 | 		 "enable WiFi power management (default: disable)"); | 
 |  | 
 | module_param_named(power_level, iwlwifi_mod_params.power_level, | 
 | 		int, S_IRUGO); | 
 | MODULE_PARM_DESC(power_level, | 
 | 		 "default power save level (range from 1 - 5, default: 1)"); | 
 |  | 
 | module_param_named(auto_agg, iwlwifi_mod_params.auto_agg, | 
 | 		bool, S_IRUGO); | 
 | MODULE_PARM_DESC(auto_agg, | 
 | 		 "enable agg w/o check traffic load (default: enable)"); |