| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (C) 2005-2017 Andes Technology Corporation |
| |
| #include <linux/linkage.h> |
| #include <linux/init.h> |
| #include <linux/pgtable.h> |
| #include <asm/ptrace.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/page.h> |
| #include <linux/sizes.h> |
| #include <asm/thread_info.h> |
| |
| #ifdef CONFIG_CPU_BIG_ENDIAN |
| #define OF_DT_MAGIC 0xd00dfeed |
| #else |
| #define OF_DT_MAGIC 0xedfe0dd0 |
| #endif |
| |
| .globl swapper_pg_dir |
| .equ swapper_pg_dir, TEXTADDR - 0x4000 |
| |
| /* |
| * Kernel startup entry point. |
| */ |
| .section ".head.text", "ax" |
| .type _stext, %function |
| ENTRY(_stext) |
| setgie.d ! Disable interrupt |
| isb |
| /* |
| * Disable I/D-cache and enable it at a proper time |
| */ |
| mfsr $r0, $mr8 |
| li $r1, #~(CACHE_CTL_mskIC_EN|CACHE_CTL_mskDC_EN) |
| and $r0, $r0, $r1 |
| mtsr $r0, $mr8 |
| |
| /* |
| * Process device tree blob |
| */ |
| andi $r0,$r2,#0x3 |
| li $r10, 0 |
| bne $r0, $r10, _nodtb |
| lwi $r0, [$r2] |
| li $r1, OF_DT_MAGIC |
| bne $r0, $r1, _nodtb |
| move $r10, $r2 |
| _nodtb: |
| |
| /* |
| * Create a temporary mapping area for booting, before start_kernel |
| */ |
| sethi $r4, hi20(swapper_pg_dir) |
| li $p0, (PAGE_OFFSET - PHYS_OFFSET) |
| sub $r4, $r4, $p0 |
| tlbop FlushAll ! invalidate TLB\n" |
| isb |
| mtsr $r4, $L1_PPTB ! load page table pointer\n" |
| |
| #ifdef CONFIG_CPU_DCACHE_DISABLE |
| #define MMU_CTL_NTCC MMU_CTL_CACHEABLE_NON |
| #else |
| #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH |
| #define MMU_CTL_NTCC MMU_CTL_CACHEABLE_WT |
| #else |
| #define MMU_CTL_NTCC MMU_CTL_CACHEABLE_WB |
| #endif |
| #endif |
| |
| /* set NTC cacheability, mutliple page size in use */ |
| mfsr $r3, $MMU_CTL |
| #if CONFIG_MEMORY_START >= 0xc0000000 |
| ori $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC3) |
| #elif CONFIG_MEMORY_START >= 0x80000000 |
| ori $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC2) |
| #elif CONFIG_MEMORY_START >= 0x40000000 |
| ori $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC1) |
| #else |
| ori $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC0) |
| #endif |
| |
| #ifdef CONFIG_ANDES_PAGE_SIZE_4KB |
| ori $r3, $r3, #(MMU_CTL_mskMPZIU) |
| #else |
| ori $r3, $r3, #(MMU_CTL_mskMPZIU|MMU_CTL_D8KB) |
| #endif |
| #ifdef CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS |
| li $r0, #MMU_CTL_UNA |
| or $r3, $r3, $r0 |
| #endif |
| mtsr $r3, $MMU_CTL |
| isb |
| |
| /* set page size and size of kernel image */ |
| mfsr $r0, $MMU_CFG |
| srli $r3, $r0, MMU_CFG_offfEPSZ |
| zeb $r3, $r3 |
| bnez $r3, _extra_page_size_support |
| #ifdef CONFIG_ANDES_PAGE_SIZE_4KB |
| li $r5, #SZ_4K ! Use 4KB page size |
| #else |
| li $r5, #SZ_8K ! Use 8KB page size |
| li $r3, #1 |
| #endif |
| mtsr $r3, $TLB_MISC |
| b _image_size_check |
| |
| _extra_page_size_support: ! Use epzs pages size |
| clz $r6, $r3 |
| subri $r2, $r6, #31 |
| li $r3, #1 |
| sll $r3, $r3, $r2 |
| /* MMU_CFG.EPSZ value -> meaning */ |
| mul $r5, $r3, $r3 |
| slli $r5, $r5, #14 |
| /* MMU_CFG.EPSZ -> TLB_MISC.ACC_PSZ */ |
| addi $r3, $r2, #0x2 |
| mtsr $r3, $TLB_MISC |
| |
| _image_size_check: |
| /* calculate the image maximum size accepted by TLB config */ |
| andi $r6, $r0, MMU_CFG_mskTBW |
| andi $r0, $r0, MMU_CFG_mskTBS |
| srli $r6, $r6, MMU_CFG_offTBW |
| srli $r0, $r0, MMU_CFG_offTBS |
| addi $r6, $r6, #0x1 ! MMU_CFG.TBW value -> meaning |
| addi $r0, $r0, #0x2 ! MMU_CFG.TBS value -> meaning |
| sll $r0, $r6, $r0 ! entries = k-way * n-set |
| mul $r6, $r0, $r5 ! max size = entries * page size |
| /* check kernel image size */ |
| la $r3, (_end - PAGE_OFFSET) |
| bgt $r3, $r6, __error |
| |
| li $r2, #(PHYS_OFFSET + TLB_DATA_kernel_text_attr) |
| li $r3, PAGE_OFFSET |
| add $r6, $r6, $r3 |
| |
| _tlb: |
| mtsr $r3, $TLB_VPN |
| dsb |
| tlbop $r2, RWR |
| isb |
| add $r3, $r3, $r5 |
| add $r2, $r2, $r5 |
| bgt $r6, $r3, _tlb |
| mfsr $r3, $TLB_MISC ! setup access page size |
| li $r2, #~0xf |
| and $r3, $r3, $r2 |
| #ifdef CONFIG_ANDES_PAGE_SIZE_8KB |
| ori $r3, $r3, #0x1 |
| #endif |
| mtsr $r3, $TLB_MISC |
| |
| mfsr $r0, $MISC_CTL ! Enable BTB, RTP, shadow sp, and HW_PRE |
| ori $r0, $r0, #MISC_init |
| mtsr $r0, $MISC_CTL |
| |
| mfsr $p1, $PSW |
| li $r15, #~PSW_clr ! clear WBNA|DME|IME|DT|IT|POM|INTL|GIE |
| and $p1, $p1, $r15 |
| ori $p1, $p1, #PSW_init |
| mtsr $p1, $IPSW ! when iret, it will automatically enable MMU |
| la $lp, __mmap_switched |
| mtsr $lp, $IPC |
| iret |
| nop |
| |
| .type __switch_data, %object |
| __switch_data: |
| .long __bss_start ! $r6 |
| .long _end ! $r7 |
| .long __atags_pointer ! $atag_pointer |
| .long init_task ! $r9, move to $r25 |
| .long init_thread_union + THREAD_SIZE ! $sp |
| |
| |
| /* |
| * The following fragment of code is executed with the MMU on in MMU mode, |
| * and uses absolute addresses; this is not position independent. |
| */ |
| .align |
| .type __mmap_switched, %function |
| __mmap_switched: |
| la $r3, __switch_data |
| lmw.bim $r6, [$r3], $r9, #0b0001 |
| move $r25, $r9 |
| move $fp, #0 ! Clear BSS (and zero $fp) |
| beq $r7, $r6, _RRT |
| 1: swi.bi $fp, [$r6], #4 |
| bne $r7, $r6, 1b |
| swi $r10, [$r8] |
| |
| _RRT: |
| b start_kernel |
| |
| __error: |
| b __error |
