| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TM2 touchkey device driver |
| * |
| * Copyright 2005 Phil Blundell |
| * Copyright 2016 Samsung Electronics Co., Ltd. |
| * |
| * Author: Beomho Seo <beomho.seo@samsung.com> |
| * Author: Jaechul Lee <jcsing.lee@samsung.com> |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pm.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" |
| |
| #define ARIES_TOUCHKEY_CMD_LED_ON 0x1 |
| #define ARIES_TOUCHKEY_CMD_LED_OFF 0x2 |
| #define TM2_TOUCHKEY_CMD_LED_ON 0x10 |
| #define TM2_TOUCHKEY_CMD_LED_OFF 0x20 |
| #define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) |
| #define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) |
| #define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 |
| #define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 |
| |
| struct touchkey_variant { |
| u8 keycode_reg; |
| u8 base_reg; |
| u8 cmd_led_on; |
| u8 cmd_led_off; |
| bool no_reg; |
| bool fixed_regulator; |
| }; |
| |
| struct tm2_touchkey_data { |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| struct led_classdev led_dev; |
| struct regulator *vdd; |
| struct regulator_bulk_data regulators[3]; |
| const struct touchkey_variant *variant; |
| u32 keycodes[4]; |
| int num_keycodes; |
| }; |
| |
| static const struct touchkey_variant tm2_touchkey_variant = { |
| .keycode_reg = 0x03, |
| .base_reg = 0x00, |
| .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON, |
| .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF, |
| }; |
| |
| static const struct touchkey_variant midas_touchkey_variant = { |
| .keycode_reg = 0x00, |
| .base_reg = 0x00, |
| .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON, |
| .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF, |
| }; |
| |
| static struct touchkey_variant aries_touchkey_variant = { |
| .no_reg = true, |
| .fixed_regulator = true, |
| .cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON, |
| .cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF, |
| }; |
| |
| static const struct touchkey_variant tc360_touchkey_variant = { |
| .keycode_reg = 0x00, |
| .base_reg = 0x00, |
| .fixed_regulator = true, |
| .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON, |
| .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF, |
| }; |
| |
| static int tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, |
| enum led_brightness brightness) |
| { |
| struct tm2_touchkey_data *touchkey = |
| container_of(led_dev, struct tm2_touchkey_data, led_dev); |
| u32 volt; |
| u8 data; |
| |
| if (brightness == LED_OFF) { |
| volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; |
| data = touchkey->variant->cmd_led_off; |
| } else { |
| volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; |
| data = touchkey->variant->cmd_led_on; |
| } |
| |
| if (!touchkey->variant->fixed_regulator) |
| regulator_set_voltage(touchkey->vdd, volt, volt); |
| |
| return touchkey->variant->no_reg ? |
| i2c_smbus_write_byte(touchkey->client, data) : |
| i2c_smbus_write_byte_data(touchkey->client, |
| touchkey->variant->base_reg, data); |
| } |
| |
| static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey) |
| { |
| int error; |
| |
| error = regulator_bulk_enable(ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| if (error) |
| return error; |
| |
| /* waiting for device initialization, at least 150ms */ |
| msleep(150); |
| |
| return 0; |
| } |
| |
| static void tm2_touchkey_power_disable(void *data) |
| { |
| struct tm2_touchkey_data *touchkey = data; |
| |
| regulator_bulk_disable(ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| } |
| |
| static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) |
| { |
| struct tm2_touchkey_data *touchkey = devid; |
| int data; |
| int index; |
| int i; |
| |
| if (touchkey->variant->no_reg) |
| data = i2c_smbus_read_byte(touchkey->client); |
| else |
| data = i2c_smbus_read_byte_data(touchkey->client, |
| touchkey->variant->keycode_reg); |
| if (data < 0) { |
| dev_err(&touchkey->client->dev, |
| "failed to read i2c data: %d\n", data); |
| goto out; |
| } |
| |
| index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1; |
| if (index < 0 || index >= touchkey->num_keycodes) { |
| dev_warn(&touchkey->client->dev, |
| "invalid keycode index %d\n", index); |
| goto out; |
| } |
| |
| input_event(touchkey->input_dev, EV_MSC, MSC_SCAN, index); |
| |
| if (data & TM2_TOUCHKEY_BIT_PRESS_EV) { |
| for (i = 0; i < touchkey->num_keycodes; i++) |
| input_report_key(touchkey->input_dev, |
| touchkey->keycodes[i], 0); |
| } else { |
| input_report_key(touchkey->input_dev, |
| touchkey->keycodes[index], 1); |
| } |
| |
| input_sync(touchkey->input_dev); |
| |
| out: |
| if (touchkey->variant->fixed_regulator && |
| data & TM2_TOUCHKEY_BIT_PRESS_EV) { |
| /* touch turns backlight on, so make sure we're in sync */ |
| if (touchkey->led_dev.brightness == LED_OFF) |
| tm2_touchkey_led_brightness_set(&touchkey->led_dev, |
| LED_OFF); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tm2_touchkey_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device_node *np = client->dev.of_node; |
| struct tm2_touchkey_data *touchkey; |
| int error; |
| int i; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_err(&client->dev, "incompatible I2C adapter\n"); |
| return -EIO; |
| } |
| |
| touchkey = devm_kzalloc(&client->dev, sizeof(*touchkey), GFP_KERNEL); |
| if (!touchkey) |
| return -ENOMEM; |
| |
| touchkey->client = client; |
| i2c_set_clientdata(client, touchkey); |
| |
| touchkey->variant = of_device_get_match_data(&client->dev); |
| |
| touchkey->regulators[0].supply = "vcc"; |
| touchkey->regulators[1].supply = "vdd"; |
| touchkey->regulators[2].supply = "vddio"; |
| error = devm_regulator_bulk_get(&client->dev, |
| ARRAY_SIZE(touchkey->regulators), |
| touchkey->regulators); |
| if (error) { |
| dev_err(&client->dev, "failed to get regulators: %d\n", error); |
| return error; |
| } |
| |
| /* Save VDD for easy access */ |
| touchkey->vdd = touchkey->regulators[1].consumer; |
| |
| touchkey->num_keycodes = of_property_read_variable_u32_array(np, |
| "linux,keycodes", touchkey->keycodes, 0, |
| ARRAY_SIZE(touchkey->keycodes)); |
| if (touchkey->num_keycodes <= 0) { |
| /* default keycodes */ |
| touchkey->keycodes[0] = KEY_PHONE; |
| touchkey->keycodes[1] = KEY_BACK; |
| touchkey->num_keycodes = 2; |
| } |
| |
| error = tm2_touchkey_power_enable(touchkey); |
| if (error) { |
| dev_err(&client->dev, "failed to power up device: %d\n", error); |
| return error; |
| } |
| |
| error = devm_add_action_or_reset(&client->dev, |
| tm2_touchkey_power_disable, touchkey); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to install poweroff handler: %d\n", error); |
| return error; |
| } |
| |
| /* input device */ |
| touchkey->input_dev = devm_input_allocate_device(&client->dev); |
| if (!touchkey->input_dev) { |
| dev_err(&client->dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; |
| touchkey->input_dev->id.bustype = BUS_I2C; |
| |
| touchkey->input_dev->keycode = touchkey->keycodes; |
| touchkey->input_dev->keycodemax = touchkey->num_keycodes; |
| touchkey->input_dev->keycodesize = sizeof(touchkey->keycodes[0]); |
| |
| input_set_capability(touchkey->input_dev, EV_MSC, MSC_SCAN); |
| for (i = 0; i < touchkey->num_keycodes; i++) |
| input_set_capability(touchkey->input_dev, EV_KEY, |
| touchkey->keycodes[i]); |
| |
| error = input_register_device(touchkey->input_dev); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to register input device: %d\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, tm2_touchkey_irq_handler, |
| IRQF_ONESHOT, |
| TM2_TOUCHKEY_DEV_NAME, touchkey); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to request threaded irq: %d\n", error); |
| return error; |
| } |
| |
| /* led device */ |
| touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; |
| touchkey->led_dev.brightness = LED_ON; |
| touchkey->led_dev.max_brightness = LED_ON; |
| touchkey->led_dev.brightness_set_blocking = |
| tm2_touchkey_led_brightness_set; |
| |
| error = devm_led_classdev_register(&client->dev, &touchkey->led_dev); |
| if (error) { |
| dev_err(&client->dev, |
| "failed to register touchkey led: %d\n", error); |
| return error; |
| } |
| |
| if (touchkey->variant->fixed_regulator) |
| tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tm2_touchkey_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); |
| |
| disable_irq(client->irq); |
| tm2_touchkey_power_disable(touchkey); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused tm2_touchkey_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct tm2_touchkey_data *touchkey = i2c_get_clientdata(client); |
| int ret; |
| |
| enable_irq(client->irq); |
| |
| ret = tm2_touchkey_power_enable(touchkey); |
| if (ret) |
| dev_err(dev, "failed to enable power: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, |
| tm2_touchkey_suspend, tm2_touchkey_resume); |
| |
| static const struct i2c_device_id tm2_touchkey_id_table[] = { |
| { TM2_TOUCHKEY_DEV_NAME, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table); |
| |
| static const struct of_device_id tm2_touchkey_of_match[] = { |
| { |
| .compatible = "cypress,tm2-touchkey", |
| .data = &tm2_touchkey_variant, |
| }, { |
| .compatible = "cypress,midas-touchkey", |
| .data = &midas_touchkey_variant, |
| }, { |
| .compatible = "cypress,aries-touchkey", |
| .data = &aries_touchkey_variant, |
| }, { |
| .compatible = "coreriver,tc360-touchkey", |
| .data = &tc360_touchkey_variant, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match); |
| |
| static struct i2c_driver tm2_touchkey_driver = { |
| .driver = { |
| .name = TM2_TOUCHKEY_DEV_NAME, |
| .pm = &tm2_touchkey_pm_ops, |
| .of_match_table = of_match_ptr(tm2_touchkey_of_match), |
| }, |
| .probe = tm2_touchkey_probe, |
| .id_table = tm2_touchkey_id_table, |
| }; |
| module_i2c_driver(tm2_touchkey_driver); |
| |
| MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); |
| MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung touchkey driver"); |
| MODULE_LICENSE("GPL v2"); |