| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Rockchip PCIE3.0 phy driver |
| * |
| * Copyright (C) 2022 Rockchip Electronics Co., Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/pcie.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| |
| /* Register for RK3568 */ |
| #define GRF_PCIE30PHY_CON1 0x4 |
| #define GRF_PCIE30PHY_CON6 0x18 |
| #define GRF_PCIE30PHY_CON9 0x24 |
| #define GRF_PCIE30PHY_DA_OCM (BIT(15) | BIT(31)) |
| #define GRF_PCIE30PHY_STATUS0 0x80 |
| #define GRF_PCIE30PHY_WR_EN (0xf << 16) |
| #define SRAM_INIT_DONE(reg) (reg & BIT(14)) |
| |
| #define RK3568_BIFURCATION_LANE_0_1 BIT(0) |
| |
| /* Register for RK3588 */ |
| #define PHP_GRF_PCIESEL_CON 0x100 |
| #define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0 |
| #define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904 |
| #define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04 |
| #define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0)) |
| |
| #define RK3588_BIFURCATION_LANE_0_1 BIT(0) |
| #define RK3588_BIFURCATION_LANE_2_3 BIT(1) |
| #define RK3588_LANE_AGGREGATION BIT(2) |
| |
| struct rockchip_p3phy_ops; |
| |
| struct rockchip_p3phy_priv { |
| const struct rockchip_p3phy_ops *ops; |
| void __iomem *mmio; |
| /* mode: RC, EP */ |
| int mode; |
| /* pcie30_phymode: Aggregation, Bifurcation */ |
| int pcie30_phymode; |
| struct regmap *phy_grf; |
| struct regmap *pipe_grf; |
| struct reset_control *p30phy; |
| struct phy *phy; |
| struct clk_bulk_data *clks; |
| int num_clks; |
| int num_lanes; |
| u32 lanes[4]; |
| }; |
| |
| struct rockchip_p3phy_ops { |
| int (*phy_init)(struct rockchip_p3phy_priv *priv); |
| }; |
| |
| static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) |
| { |
| struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy); |
| |
| /* Actually We don't care EP/RC mode, but just record it */ |
| switch (submode) { |
| case PHY_MODE_PCIE_RC: |
| priv->mode = PHY_MODE_PCIE_RC; |
| break; |
| case PHY_MODE_PCIE_EP: |
| priv->mode = PHY_MODE_PCIE_EP; |
| break; |
| default: |
| dev_err(&phy->dev, "%s, invalid mode\n", __func__); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv) |
| { |
| struct phy *phy = priv->phy; |
| bool bifurcation = false; |
| int ret; |
| u32 reg; |
| |
| /* Deassert PCIe PMA output clamp mode */ |
| regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM); |
| |
| for (int i = 0; i < priv->num_lanes; i++) { |
| dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]); |
| if (priv->lanes[i] > 1) |
| bifurcation = true; |
| } |
| |
| /* Set bifurcation if needed, and it doesn't care RC/EP */ |
| if (bifurcation) { |
| dev_info(&phy->dev, "bifurcation enabled\n"); |
| regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6, |
| GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1); |
| regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1, |
| GRF_PCIE30PHY_DA_OCM); |
| } else { |
| dev_dbg(&phy->dev, "bifurcation disabled\n"); |
| regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6, |
| GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1); |
| } |
| |
| reset_control_deassert(priv->p30phy); |
| |
| ret = regmap_read_poll_timeout(priv->phy_grf, |
| GRF_PCIE30PHY_STATUS0, |
| reg, SRAM_INIT_DONE(reg), |
| 0, 500); |
| if (ret) |
| dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n", |
| __func__, reg); |
| return ret; |
| } |
| |
| static const struct rockchip_p3phy_ops rk3568_ops = { |
| .phy_init = rockchip_p3phy_rk3568_init, |
| }; |
| |
| static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv) |
| { |
| u32 reg = 0; |
| u8 mode = 0; |
| int ret; |
| |
| /* Deassert PCIe PMA output clamp mode */ |
| regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24)); |
| |
| /* Set bifurcation if needed */ |
| for (int i = 0; i < priv->num_lanes; i++) { |
| if (!priv->lanes[i]) |
| mode |= (BIT(i) << 3); |
| |
| if (priv->lanes[i] > 1) |
| mode |= (BIT(i) >> 1); |
| } |
| |
| if (!mode) |
| reg = RK3588_LANE_AGGREGATION; |
| else { |
| if (mode & (BIT(0) | BIT(1))) |
| reg |= RK3588_BIFURCATION_LANE_0_1; |
| |
| if (mode & (BIT(2) | BIT(3))) |
| reg |= RK3588_BIFURCATION_LANE_2_3; |
| } |
| |
| regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg); |
| |
| /* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */ |
| if (!IS_ERR(priv->pipe_grf)) { |
| reg = (mode & (BIT(6) | BIT(7))) >> 6; |
| if (reg) |
| regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON, |
| (reg << 16) | reg); |
| } |
| |
| reset_control_deassert(priv->p30phy); |
| |
| ret = regmap_read_poll_timeout(priv->phy_grf, |
| RK3588_PCIE3PHY_GRF_PHY0_STATUS1, |
| reg, RK3588_SRAM_INIT_DONE(reg), |
| 0, 500); |
| ret |= regmap_read_poll_timeout(priv->phy_grf, |
| RK3588_PCIE3PHY_GRF_PHY1_STATUS1, |
| reg, RK3588_SRAM_INIT_DONE(reg), |
| 0, 500); |
| if (ret) |
| dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n", |
| reg); |
| return ret; |
| } |
| |
| static const struct rockchip_p3phy_ops rk3588_ops = { |
| .phy_init = rockchip_p3phy_rk3588_init, |
| }; |
| |
| static int rochchip_p3phy_init(struct phy *phy) |
| { |
| struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks); |
| if (ret) { |
| dev_err(&priv->phy->dev, "failed to enable PCIe bulk clks %d\n", ret); |
| return ret; |
| } |
| |
| reset_control_assert(priv->p30phy); |
| udelay(1); |
| |
| if (priv->ops->phy_init) { |
| ret = priv->ops->phy_init(priv); |
| if (ret) |
| clk_bulk_disable_unprepare(priv->num_clks, priv->clks); |
| } |
| |
| return ret; |
| } |
| |
| static int rochchip_p3phy_exit(struct phy *phy) |
| { |
| struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy); |
| |
| clk_bulk_disable_unprepare(priv->num_clks, priv->clks); |
| reset_control_assert(priv->p30phy); |
| return 0; |
| } |
| |
| static const struct phy_ops rochchip_p3phy_ops = { |
| .init = rochchip_p3phy_init, |
| .exit = rochchip_p3phy_exit, |
| .set_mode = rockchip_p3phy_set_mode, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int rockchip_p3phy_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct device *dev = &pdev->dev; |
| struct rockchip_p3phy_priv *priv; |
| struct device_node *np = dev->of_node; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(priv->mmio)) { |
| ret = PTR_ERR(priv->mmio); |
| return ret; |
| } |
| |
| priv->ops = of_device_get_match_data(&pdev->dev); |
| if (!priv->ops) { |
| dev_err(dev, "no of match data provided\n"); |
| return -EINVAL; |
| } |
| |
| priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf"); |
| if (IS_ERR(priv->phy_grf)) { |
| dev_err(dev, "failed to find rockchip,phy_grf regmap\n"); |
| return PTR_ERR(priv->phy_grf); |
| } |
| |
| if (of_device_is_compatible(np, "rockchip,rk3588-pcie3-phy")) { |
| priv->pipe_grf = |
| syscon_regmap_lookup_by_phandle(dev->of_node, |
| "rockchip,pipe-grf"); |
| if (IS_ERR(priv->pipe_grf)) |
| dev_info(dev, "failed to find rockchip,pipe_grf regmap\n"); |
| } else { |
| priv->pipe_grf = NULL; |
| } |
| |
| priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes", |
| priv->lanes, 2, |
| ARRAY_SIZE(priv->lanes)); |
| |
| /* if no data-lanes assume aggregation */ |
| if (priv->num_lanes == -EINVAL) { |
| dev_dbg(dev, "no data-lanes property found\n"); |
| priv->num_lanes = 1; |
| priv->lanes[0] = 1; |
| } else if (priv->num_lanes < 0) { |
| dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes); |
| return priv->num_lanes; |
| } |
| |
| priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops); |
| if (IS_ERR(priv->phy)) { |
| dev_err(dev, "failed to create combphy\n"); |
| return PTR_ERR(priv->phy); |
| } |
| |
| priv->p30phy = devm_reset_control_get_optional_exclusive(dev, "phy"); |
| if (IS_ERR(priv->p30phy)) { |
| return dev_err_probe(dev, PTR_ERR(priv->p30phy), |
| "failed to get phy reset control\n"); |
| } |
| if (!priv->p30phy) |
| dev_info(dev, "no phy reset control specified\n"); |
| |
| priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks); |
| if (priv->num_clks < 1) |
| return -ENODEV; |
| |
| dev_set_drvdata(dev, priv); |
| phy_set_drvdata(priv->phy, priv); |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static const struct of_device_id rockchip_p3phy_of_match[] = { |
| { .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops }, |
| { .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match); |
| |
| static struct platform_driver rockchip_p3phy_driver = { |
| .probe = rockchip_p3phy_probe, |
| .driver = { |
| .name = "rockchip-snps-pcie3-phy", |
| .of_match_table = rockchip_p3phy_of_match, |
| }, |
| }; |
| module_platform_driver(rockchip_p3phy_driver); |
| MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver"); |
| MODULE_LICENSE("GPL"); |