| What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump debug registers from the HPRE cluster. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Write the HPRE core selection in the cluster into this file, |
| and then we can read the debug information of the core. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: HPRE cores debug registers read clear control. 1 means enable |
| register read clear, otherwise 0. Writing to this file has no |
| functional effect, only enable or disable counters clear after |
| reading of these registers. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/current_qm |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: One HPRE controller has one PF and multiple VFs, each function |
| has a QM. Select the QM which below qm refers to. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/alg_qos |
| Date: Jun 2021 |
| Contact: linux-crypto@vger.kernel.org |
| Description: The <bdf> is related the function for PF and VF. |
| HPRE driver supports to configure each function's QoS, the driver |
| supports to write <bdf> value to alg_qos in the host. Such as |
| "echo <bdf> value > alg_qos". The qos value is 1~1000, means |
| 1/1000~1000/1000 of total QoS. The driver reading alg_qos to |
| get related QoS in the host and VM, Such as "cat alg_qos". |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/regs |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump debug registers from the HPRE. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump debug registers from the QM. |
| Available for PF and VF in host. VF in guest currently only |
| has one debug register. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: One QM may contain multiple queues. Select specific queue to |
| show its debug registers in above regs. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable |
| Date: Sep 2019 |
| Contact: linux-crypto@vger.kernel.org |
| Description: QM debug registers(regs) read clear control. 1 means enable |
| register read clear, otherwise 0. |
| Writing to this file has no functional effect, only enable or |
| disable counters clear after reading of these registers. |
| Only available for PF. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the number of invalid interrupts for |
| QM task completion. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the number of QM async event queue interrupts. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the number of interrupts for QM abnormal event. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the number of queue allocation errors. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the number of failed QM mailbox commands. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the status of the QM. |
| Two states: work, stop. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs |
| Date: Mar 2022 |
| Contact: linux-crypto@vger.kernel.org |
| Description: QM debug registers(regs) read hardware register value. This |
| node is used to show the change of the qm register values. This |
| node can be help users to check the change of register values. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_state |
| Date: Jan 2024 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the state of the device. |
| 0: busy, 1: idle. |
| Only available for PF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_timeout |
| Date: Feb 2024 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Set the wait time when stop queue fails. Available for both PF |
| and VF, and take no other effect on HPRE. |
| 0: not wait(default), others value: wait dev_timeout * 20 microsecond. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/dev_state |
| Date: Feb 2024 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the stop queue status of the QM. The default value is 0, |
| if dev_timeout is set, when stop queue fails, the dev_state |
| will return non-zero value. Available for both PF and VF, |
| and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs |
| Date: Mar 2022 |
| Contact: linux-crypto@vger.kernel.org |
| Description: HPRE debug registers(regs) read hardware register value. This |
| node is used to show the change of the register values. This |
| node can be help users to check the change of register values. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of sent requests. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of received requests. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of requests sent |
| with returning busy. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of completed but error requests. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of invalid requests being received. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Set the threshold time for counting the request which is |
| processed longer than the threshold. |
| 0: disable(default), 1: 1 microsecond. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt |
| Date: Apr 2020 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the total number of time out requests. |
| Available for both PF and VF, and take no other effect on HPRE. |
| |
| What: /sys/kernel/debug/hisi_hpre/<bdf>/cap_regs |
| Date: Oct 2024 |
| Contact: linux-crypto@vger.kernel.org |
| Description: Dump the values of the qm and hpre capability bit registers and |
| support the query of device specifications to facilitate fault locating. |
| Available for both PF and VF, and take no other effect on HPRE. |
