| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: ROHM BD96801 Power Management Integrated Circuit regulators |
| |
| maintainers: |
| - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> |
| |
| description: |
| This module is part of the ROHM BD96801 MFD device. For more details |
| see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml. |
| |
| The regulator controller is represented as a sub-node of the PMIC node |
| on the device tree. |
| |
| Regulator nodes should be named to buck_<number> and ldo_<number>. |
| The valid names for BD96801 regulator nodes are |
| buck1, buck2, buck3, buck4, ldo5, ldo6, ldo7 |
| |
| patternProperties: |
| "^ldo[5-7]$": |
| type: object |
| description: |
| Properties for single LDO regulator. |
| $ref: regulator.yaml# |
| |
| properties: |
| rohm,initial-voltage-microvolt: |
| description: |
| Initial voltage for regulator. Voltage can be tuned +/-150 mV from |
| this value. NOTE, This can be modified via I2C only when PMIC is in |
| STBY state. |
| minimum: 300000 |
| maximum: 3300000 |
| |
| unevaluatedProperties: false |
| |
| "^buck[1-4]$": |
| type: object |
| description: |
| Properties for single BUCK regulator. |
| $ref: regulator.yaml# |
| |
| properties: |
| rohm,initial-voltage-microvolt: |
| description: |
| Initial voltage for regulator. Voltage can be tuned +/-150 mV from |
| this value. NOTE, This can be modified via I2C only when PMIC is in |
| STBY state. |
| minimum: 500000 |
| maximum: 3300000 |
| |
| rohm,keep-on-stby: |
| description: |
| Keep the regulator powered when PMIC transitions to STBY state. |
| type: boolean |
| |
| unevaluatedProperties: false |
| |
| additionalProperties: false |
