| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #define SWSMU_CODE_LAYER_L2 |
| |
| #include <linux/firmware.h> |
| #include <linux/pci.h> |
| #include <linux/i2c.h> |
| #include "amdgpu.h" |
| #include "amdgpu_dpm.h" |
| #include "amdgpu_smu.h" |
| #include "atomfirmware.h" |
| #include "amdgpu_atomfirmware.h" |
| #include "amdgpu_atombios.h" |
| #include "soc15_common.h" |
| #include "smu_v11_0.h" |
| #include "smu11_driver_if_navi10.h" |
| #include "atom.h" |
| #include "navi10_ppt.h" |
| #include "smu_v11_0_pptable.h" |
| #include "smu_v11_0_ppsmc.h" |
| #include "nbio/nbio_2_3_offset.h" |
| #include "nbio/nbio_2_3_sh_mask.h" |
| #include "thm/thm_11_0_2_offset.h" |
| #include "thm/thm_11_0_2_sh_mask.h" |
| |
| #include "asic_reg/mp/mp_11_0_sh_mask.h" |
| #include "smu_cmn.h" |
| #include "smu_11_0_cdr_table.h" |
| |
| /* |
| * DO NOT use these for err/warn/info/debug messages. |
| * Use dev_err, dev_warn, dev_info and dev_dbg instead. |
| * They are more MGPU friendly. |
| */ |
| #undef pr_err |
| #undef pr_warn |
| #undef pr_info |
| #undef pr_debug |
| |
| #define FEATURE_MASK(feature) (1ULL << feature) |
| #define SMC_DPM_FEATURE ( \ |
| FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_GFX_PACE_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_UCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_LINK_BIT) | \ |
| FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT)) |
| |
| #define SMU_11_0_GFX_BUSY_THRESHOLD 15 |
| |
| static struct cmn2asic_msg_mapping navi10_message_map[SMU_MSG_MAX_COUNT] = { |
| MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 1), |
| MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 1), |
| MSG_MAP(GetDriverIfVersion, PPSMC_MSG_GetDriverIfVersion, 1), |
| MSG_MAP(SetAllowedFeaturesMaskLow, PPSMC_MSG_SetAllowedFeaturesMaskLow, 0), |
| MSG_MAP(SetAllowedFeaturesMaskHigh, PPSMC_MSG_SetAllowedFeaturesMaskHigh, 0), |
| MSG_MAP(EnableAllSmuFeatures, PPSMC_MSG_EnableAllSmuFeatures, 0), |
| MSG_MAP(DisableAllSmuFeatures, PPSMC_MSG_DisableAllSmuFeatures, 0), |
| MSG_MAP(EnableSmuFeaturesLow, PPSMC_MSG_EnableSmuFeaturesLow, 0), |
| MSG_MAP(EnableSmuFeaturesHigh, PPSMC_MSG_EnableSmuFeaturesHigh, 0), |
| MSG_MAP(DisableSmuFeaturesLow, PPSMC_MSG_DisableSmuFeaturesLow, 0), |
| MSG_MAP(DisableSmuFeaturesHigh, PPSMC_MSG_DisableSmuFeaturesHigh, 0), |
| MSG_MAP(GetEnabledSmuFeaturesLow, PPSMC_MSG_GetEnabledSmuFeaturesLow, 1), |
| MSG_MAP(GetEnabledSmuFeaturesHigh, PPSMC_MSG_GetEnabledSmuFeaturesHigh, 1), |
| MSG_MAP(SetWorkloadMask, PPSMC_MSG_SetWorkloadMask, 0), |
| MSG_MAP(SetPptLimit, PPSMC_MSG_SetPptLimit, 0), |
| MSG_MAP(SetDriverDramAddrHigh, PPSMC_MSG_SetDriverDramAddrHigh, 1), |
| MSG_MAP(SetDriverDramAddrLow, PPSMC_MSG_SetDriverDramAddrLow, 1), |
| MSG_MAP(SetToolsDramAddrHigh, PPSMC_MSG_SetToolsDramAddrHigh, 0), |
| MSG_MAP(SetToolsDramAddrLow, PPSMC_MSG_SetToolsDramAddrLow, 0), |
| MSG_MAP(TransferTableSmu2Dram, PPSMC_MSG_TransferTableSmu2Dram, 1), |
| MSG_MAP(TransferTableDram2Smu, PPSMC_MSG_TransferTableDram2Smu, 0), |
| MSG_MAP(UseDefaultPPTable, PPSMC_MSG_UseDefaultPPTable, 0), |
| MSG_MAP(UseBackupPPTable, PPSMC_MSG_UseBackupPPTable, 0), |
| MSG_MAP(RunBtc, PPSMC_MSG_RunBtc, 0), |
| MSG_MAP(EnterBaco, PPSMC_MSG_EnterBaco, 0), |
| MSG_MAP(SetSoftMinByFreq, PPSMC_MSG_SetSoftMinByFreq, 1), |
| MSG_MAP(SetSoftMaxByFreq, PPSMC_MSG_SetSoftMaxByFreq, 1), |
| MSG_MAP(SetHardMinByFreq, PPSMC_MSG_SetHardMinByFreq, 0), |
| MSG_MAP(SetHardMaxByFreq, PPSMC_MSG_SetHardMaxByFreq, 0), |
| MSG_MAP(GetMinDpmFreq, PPSMC_MSG_GetMinDpmFreq, 1), |
| MSG_MAP(GetMaxDpmFreq, PPSMC_MSG_GetMaxDpmFreq, 1), |
| MSG_MAP(GetDpmFreqByIndex, PPSMC_MSG_GetDpmFreqByIndex, 1), |
| MSG_MAP(SetMemoryChannelConfig, PPSMC_MSG_SetMemoryChannelConfig, 0), |
| MSG_MAP(SetGeminiMode, PPSMC_MSG_SetGeminiMode, 0), |
| MSG_MAP(SetGeminiApertureHigh, PPSMC_MSG_SetGeminiApertureHigh, 0), |
| MSG_MAP(SetGeminiApertureLow, PPSMC_MSG_SetGeminiApertureLow, 0), |
| MSG_MAP(OverridePcieParameters, PPSMC_MSG_OverridePcieParameters, 0), |
| MSG_MAP(SetMinDeepSleepDcefclk, PPSMC_MSG_SetMinDeepSleepDcefclk, 0), |
| MSG_MAP(ReenableAcDcInterrupt, PPSMC_MSG_ReenableAcDcInterrupt, 0), |
| MSG_MAP(NotifyPowerSource, PPSMC_MSG_NotifyPowerSource, 0), |
| MSG_MAP(SetUclkFastSwitch, PPSMC_MSG_SetUclkFastSwitch, 0), |
| MSG_MAP(SetVideoFps, PPSMC_MSG_SetVideoFps, 0), |
| MSG_MAP(PrepareMp1ForUnload, PPSMC_MSG_PrepareMp1ForUnload, 1), |
| MSG_MAP(DramLogSetDramAddrHigh, PPSMC_MSG_DramLogSetDramAddrHigh, 0), |
| MSG_MAP(DramLogSetDramAddrLow, PPSMC_MSG_DramLogSetDramAddrLow, 0), |
| MSG_MAP(DramLogSetDramSize, PPSMC_MSG_DramLogSetDramSize, 0), |
| MSG_MAP(ConfigureGfxDidt, PPSMC_MSG_ConfigureGfxDidt, 0), |
| MSG_MAP(NumOfDisplays, PPSMC_MSG_NumOfDisplays, 0), |
| MSG_MAP(SetSystemVirtualDramAddrHigh, PPSMC_MSG_SetSystemVirtualDramAddrHigh, 0), |
| MSG_MAP(SetSystemVirtualDramAddrLow, PPSMC_MSG_SetSystemVirtualDramAddrLow, 0), |
| MSG_MAP(AllowGfxOff, PPSMC_MSG_AllowGfxOff, 0), |
| MSG_MAP(DisallowGfxOff, PPSMC_MSG_DisallowGfxOff, 0), |
| MSG_MAP(GetPptLimit, PPSMC_MSG_GetPptLimit, 0), |
| MSG_MAP(GetDcModeMaxDpmFreq, PPSMC_MSG_GetDcModeMaxDpmFreq, 1), |
| MSG_MAP(GetDebugData, PPSMC_MSG_GetDebugData, 0), |
| MSG_MAP(ExitBaco, PPSMC_MSG_ExitBaco, 0), |
| MSG_MAP(PrepareMp1ForReset, PPSMC_MSG_PrepareMp1ForReset, 0), |
| MSG_MAP(PrepareMp1ForShutdown, PPSMC_MSG_PrepareMp1ForShutdown, 0), |
| MSG_MAP(PowerUpVcn, PPSMC_MSG_PowerUpVcn, 0), |
| MSG_MAP(PowerDownVcn, PPSMC_MSG_PowerDownVcn, 0), |
| MSG_MAP(PowerUpJpeg, PPSMC_MSG_PowerUpJpeg, 0), |
| MSG_MAP(PowerDownJpeg, PPSMC_MSG_PowerDownJpeg, 0), |
| MSG_MAP(BacoAudioD3PME, PPSMC_MSG_BacoAudioD3PME, 0), |
| MSG_MAP(ArmD3, PPSMC_MSG_ArmD3, 0), |
| MSG_MAP(DAL_DISABLE_DUMMY_PSTATE_CHANGE, PPSMC_MSG_DALDisableDummyPstateChange, 0), |
| MSG_MAP(DAL_ENABLE_DUMMY_PSTATE_CHANGE, PPSMC_MSG_DALEnableDummyPstateChange, 0), |
| MSG_MAP(GetVoltageByDpm, PPSMC_MSG_GetVoltageByDpm, 0), |
| MSG_MAP(GetVoltageByDpmOverdrive, PPSMC_MSG_GetVoltageByDpmOverdrive, 0), |
| MSG_MAP(SetMGpuFanBoostLimitRpm, PPSMC_MSG_SetMGpuFanBoostLimitRpm, 0), |
| MSG_MAP(SET_DRIVER_DUMMY_TABLE_DRAM_ADDR_HIGH, PPSMC_MSG_SetDriverDummyTableDramAddrHigh, 0), |
| MSG_MAP(SET_DRIVER_DUMMY_TABLE_DRAM_ADDR_LOW, PPSMC_MSG_SetDriverDummyTableDramAddrLow, 0), |
| MSG_MAP(GET_UMC_FW_WA, PPSMC_MSG_GetUMCFWWA, 0), |
| }; |
| |
| static struct cmn2asic_mapping navi10_clk_map[SMU_CLK_COUNT] = { |
| CLK_MAP(GFXCLK, PPCLK_GFXCLK), |
| CLK_MAP(SCLK, PPCLK_GFXCLK), |
| CLK_MAP(SOCCLK, PPCLK_SOCCLK), |
| CLK_MAP(FCLK, PPCLK_SOCCLK), |
| CLK_MAP(UCLK, PPCLK_UCLK), |
| CLK_MAP(MCLK, PPCLK_UCLK), |
| CLK_MAP(DCLK, PPCLK_DCLK), |
| CLK_MAP(VCLK, PPCLK_VCLK), |
| CLK_MAP(DCEFCLK, PPCLK_DCEFCLK), |
| CLK_MAP(DISPCLK, PPCLK_DISPCLK), |
| CLK_MAP(PIXCLK, PPCLK_PIXCLK), |
| CLK_MAP(PHYCLK, PPCLK_PHYCLK), |
| }; |
| |
| static struct cmn2asic_mapping navi10_feature_mask_map[SMU_FEATURE_COUNT] = { |
| FEA_MAP(DPM_PREFETCHER), |
| FEA_MAP(DPM_GFXCLK), |
| FEA_MAP(DPM_GFX_PACE), |
| FEA_MAP(DPM_UCLK), |
| FEA_MAP(DPM_SOCCLK), |
| FEA_MAP(DPM_MP0CLK), |
| FEA_MAP(DPM_LINK), |
| FEA_MAP(DPM_DCEFCLK), |
| FEA_MAP(MEM_VDDCI_SCALING), |
| FEA_MAP(MEM_MVDD_SCALING), |
| FEA_MAP(DS_GFXCLK), |
| FEA_MAP(DS_SOCCLK), |
| FEA_MAP(DS_LCLK), |
| FEA_MAP(DS_DCEFCLK), |
| FEA_MAP(DS_UCLK), |
| FEA_MAP(GFX_ULV), |
| FEA_MAP(FW_DSTATE), |
| FEA_MAP(GFXOFF), |
| FEA_MAP(BACO), |
| FEA_MAP(VCN_PG), |
| FEA_MAP(JPEG_PG), |
| FEA_MAP(USB_PG), |
| FEA_MAP(RSMU_SMN_CG), |
| FEA_MAP(PPT), |
| FEA_MAP(TDC), |
| FEA_MAP(GFX_EDC), |
| FEA_MAP(APCC_PLUS), |
| FEA_MAP(GTHR), |
| FEA_MAP(ACDC), |
| FEA_MAP(VR0HOT), |
| FEA_MAP(VR1HOT), |
| FEA_MAP(FW_CTF), |
| FEA_MAP(FAN_CONTROL), |
| FEA_MAP(THERMAL), |
| FEA_MAP(GFX_DCS), |
| FEA_MAP(RM), |
| FEA_MAP(LED_DISPLAY), |
| FEA_MAP(GFX_SS), |
| FEA_MAP(OUT_OF_BAND_MONITOR), |
| FEA_MAP(TEMP_DEPENDENT_VMIN), |
| FEA_MAP(MMHUB_PG), |
| FEA_MAP(ATHUB_PG), |
| FEA_MAP(APCC_DFLL), |
| }; |
| |
| static struct cmn2asic_mapping navi10_table_map[SMU_TABLE_COUNT] = { |
| TAB_MAP(PPTABLE), |
| TAB_MAP(WATERMARKS), |
| TAB_MAP(AVFS), |
| TAB_MAP(AVFS_PSM_DEBUG), |
| TAB_MAP(AVFS_FUSE_OVERRIDE), |
| TAB_MAP(PMSTATUSLOG), |
| TAB_MAP(SMU_METRICS), |
| TAB_MAP(DRIVER_SMU_CONFIG), |
| TAB_MAP(ACTIVITY_MONITOR_COEFF), |
| TAB_MAP(OVERDRIVE), |
| TAB_MAP(I2C_COMMANDS), |
| TAB_MAP(PACE), |
| }; |
| |
| static struct cmn2asic_mapping navi10_pwr_src_map[SMU_POWER_SOURCE_COUNT] = { |
| PWR_MAP(AC), |
| PWR_MAP(DC), |
| }; |
| |
| static struct cmn2asic_mapping navi10_workload_map[PP_SMC_POWER_PROFILE_COUNT] = { |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT, WORKLOAD_PPLIB_DEFAULT_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_FULLSCREEN3D, WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_POWERSAVING, WORKLOAD_PPLIB_POWER_SAVING_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VIDEO, WORKLOAD_PPLIB_VIDEO_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_VR, WORKLOAD_PPLIB_VR_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_COMPUTE, WORKLOAD_PPLIB_COMPUTE_BIT), |
| WORKLOAD_MAP(PP_SMC_POWER_PROFILE_CUSTOM, WORKLOAD_PPLIB_CUSTOM_BIT), |
| }; |
| |
| static const uint8_t navi1x_throttler_map[] = { |
| [THROTTLER_TEMP_EDGE_BIT] = (SMU_THROTTLER_TEMP_EDGE_BIT), |
| [THROTTLER_TEMP_HOTSPOT_BIT] = (SMU_THROTTLER_TEMP_HOTSPOT_BIT), |
| [THROTTLER_TEMP_MEM_BIT] = (SMU_THROTTLER_TEMP_MEM_BIT), |
| [THROTTLER_TEMP_VR_GFX_BIT] = (SMU_THROTTLER_TEMP_VR_GFX_BIT), |
| [THROTTLER_TEMP_VR_MEM0_BIT] = (SMU_THROTTLER_TEMP_VR_MEM0_BIT), |
| [THROTTLER_TEMP_VR_MEM1_BIT] = (SMU_THROTTLER_TEMP_VR_MEM1_BIT), |
| [THROTTLER_TEMP_VR_SOC_BIT] = (SMU_THROTTLER_TEMP_VR_SOC_BIT), |
| [THROTTLER_TEMP_LIQUID0_BIT] = (SMU_THROTTLER_TEMP_LIQUID0_BIT), |
| [THROTTLER_TEMP_LIQUID1_BIT] = (SMU_THROTTLER_TEMP_LIQUID1_BIT), |
| [THROTTLER_TDC_GFX_BIT] = (SMU_THROTTLER_TDC_GFX_BIT), |
| [THROTTLER_TDC_SOC_BIT] = (SMU_THROTTLER_TDC_SOC_BIT), |
| [THROTTLER_PPT0_BIT] = (SMU_THROTTLER_PPT0_BIT), |
| [THROTTLER_PPT1_BIT] = (SMU_THROTTLER_PPT1_BIT), |
| [THROTTLER_PPT2_BIT] = (SMU_THROTTLER_PPT2_BIT), |
| [THROTTLER_PPT3_BIT] = (SMU_THROTTLER_PPT3_BIT), |
| [THROTTLER_FIT_BIT] = (SMU_THROTTLER_FIT_BIT), |
| [THROTTLER_PPM_BIT] = (SMU_THROTTLER_PPM_BIT), |
| [THROTTLER_APCC_BIT] = (SMU_THROTTLER_APCC_BIT), |
| }; |
| |
| |
| static bool is_asic_secure(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| bool is_secure = true; |
| uint32_t mp0_fw_intf; |
| |
| mp0_fw_intf = RREG32_PCIE(MP0_Public | |
| (smnMP0_FW_INTF & 0xffffffff)); |
| |
| if (!(mp0_fw_intf & (1 << 19))) |
| is_secure = false; |
| |
| return is_secure; |
| } |
| |
| static int |
| navi10_get_allowed_feature_mask(struct smu_context *smu, |
| uint32_t *feature_mask, uint32_t num) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| memset(feature_mask, 0, sizeof(uint32_t) * num); |
| |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_PREFETCHER_BIT) |
| | FEATURE_MASK(FEATURE_DPM_MP0CLK_BIT) |
| | FEATURE_MASK(FEATURE_RSMU_SMN_CG_BIT) |
| | FEATURE_MASK(FEATURE_DS_SOCCLK_BIT) |
| | FEATURE_MASK(FEATURE_PPT_BIT) |
| | FEATURE_MASK(FEATURE_TDC_BIT) |
| | FEATURE_MASK(FEATURE_GFX_EDC_BIT) |
| | FEATURE_MASK(FEATURE_APCC_PLUS_BIT) |
| | FEATURE_MASK(FEATURE_VR0HOT_BIT) |
| | FEATURE_MASK(FEATURE_FAN_CONTROL_BIT) |
| | FEATURE_MASK(FEATURE_THERMAL_BIT) |
| | FEATURE_MASK(FEATURE_LED_DISPLAY_BIT) |
| | FEATURE_MASK(FEATURE_DS_LCLK_BIT) |
| | FEATURE_MASK(FEATURE_DS_DCEFCLK_BIT) |
| | FEATURE_MASK(FEATURE_FW_DSTATE_BIT) |
| | FEATURE_MASK(FEATURE_BACO_BIT) |
| | FEATURE_MASK(FEATURE_GFX_SS_BIT) |
| | FEATURE_MASK(FEATURE_APCC_DFLL_BIT) |
| | FEATURE_MASK(FEATURE_FW_CTF_BIT) |
| | FEATURE_MASK(FEATURE_OUT_OF_BAND_MONITOR_BIT) |
| | FEATURE_MASK(FEATURE_TEMP_DEPENDENT_VMIN_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_GFXCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_PCIE_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_LINK_BIT); |
| |
| if (adev->pm.pp_feature & PP_DCEFCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_DCEFCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_ULV_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFX_ULV_BIT); |
| |
| if (adev->pm.pp_feature & PP_SCLK_DEEP_SLEEP_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DS_GFXCLK_BIT); |
| |
| if (adev->pm.pp_feature & PP_GFXOFF_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_GFXOFF_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_MMHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_MMHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_ATHUB) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_ATHUB_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_VCN) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_VCN_PG_BIT); |
| |
| if (smu->adev->pg_flags & AMD_PG_SUPPORT_JPEG) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_JPEG_PG_BIT); |
| |
| if (smu->dc_controlled_by_gpio) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_ACDC_BIT); |
| |
| if (adev->pm.pp_feature & PP_SOCCLK_DPM_MASK) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_SOCCLK_BIT); |
| |
| /* DPM UCLK enablement should be skipped for navi10 A0 secure board */ |
| if (!(is_asic_secure(smu) && |
| (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 0)) && |
| (adev->rev_id == 0)) && |
| (adev->pm.pp_feature & PP_MCLK_DPM_MASK)) |
| *(uint64_t *)feature_mask |= FEATURE_MASK(FEATURE_DPM_UCLK_BIT) |
| | FEATURE_MASK(FEATURE_MEM_VDDCI_SCALING_BIT) |
| | FEATURE_MASK(FEATURE_MEM_MVDD_SCALING_BIT); |
| |
| /* DS SOCCLK enablement should be skipped for navi10 A0 secure board */ |
| if (is_asic_secure(smu) && |
| (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 0)) && |
| (adev->rev_id == 0)) |
| *(uint64_t *)feature_mask &= |
| ~FEATURE_MASK(FEATURE_DS_SOCCLK_BIT); |
| |
| return 0; |
| } |
| |
| static void navi10_check_bxco_support(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| struct smu_baco_context *smu_baco = &smu->smu_baco; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t val; |
| |
| if (powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_BACO || |
| powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_MACO) { |
| val = RREG32_SOC15(NBIO, 0, mmRCC_BIF_STRAP0); |
| smu_baco->platform_support = |
| (val & RCC_BIF_STRAP0__STRAP_PX_CAPABLE_MASK) ? true : |
| false; |
| } |
| } |
| |
| static int navi10_check_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| |
| if (powerplay_table->platform_caps & SMU_11_0_PP_PLATFORM_CAP_HARDWAREDC) |
| smu->dc_controlled_by_gpio = true; |
| |
| navi10_check_bxco_support(smu); |
| |
| table_context->thermal_controller_type = |
| powerplay_table->thermal_controller_type; |
| |
| /* |
| * Instead of having its own buffer space and get overdrive_table copied, |
| * smu->od_settings just points to the actual overdrive_table |
| */ |
| smu->od_settings = &powerplay_table->overdrive_table; |
| |
| return 0; |
| } |
| |
| static int navi10_append_powerplay_table(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *smc_pptable = table_context->driver_pptable; |
| struct atom_smc_dpm_info_v4_5 *smc_dpm_table; |
| struct atom_smc_dpm_info_v4_7 *smc_dpm_table_v4_7; |
| int index, ret; |
| |
| index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1, |
| smc_dpm_info); |
| |
| ret = amdgpu_atombios_get_data_table(adev, index, NULL, NULL, NULL, |
| (uint8_t **)&smc_dpm_table); |
| if (ret) |
| return ret; |
| |
| dev_info(adev->dev, "smc_dpm_info table revision(format.content): %d.%d\n", |
| smc_dpm_table->table_header.format_revision, |
| smc_dpm_table->table_header.content_revision); |
| |
| if (smc_dpm_table->table_header.format_revision != 4) { |
| dev_err(adev->dev, "smc_dpm_info table format revision is not 4!\n"); |
| return -EINVAL; |
| } |
| |
| switch (smc_dpm_table->table_header.content_revision) { |
| case 5: /* nv10 and nv14 */ |
| smu_memcpy_trailing(smc_pptable, I2cControllers, BoardReserved, |
| smc_dpm_table, I2cControllers); |
| break; |
| case 7: /* nv12 */ |
| ret = amdgpu_atombios_get_data_table(adev, index, NULL, NULL, NULL, |
| (uint8_t **)&smc_dpm_table_v4_7); |
| if (ret) |
| return ret; |
| smu_memcpy_trailing(smc_pptable, I2cControllers, BoardReserved, |
| smc_dpm_table_v4_7, I2cControllers); |
| break; |
| default: |
| dev_err(smu->adev->dev, "smc_dpm_info with unsupported content revision %d!\n", |
| smc_dpm_table->table_header.content_revision); |
| return -EINVAL; |
| } |
| |
| if (adev->pm.pp_feature & PP_GFXOFF_MASK) { |
| /* TODO: remove it once SMU fw fix it */ |
| smc_pptable->DebugOverrides |= DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_store_powerplay_table(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| |
| memcpy(table_context->driver_pptable, &powerplay_table->smc_pptable, |
| sizeof(PPTable_t)); |
| |
| return 0; |
| } |
| |
| static int navi10_setup_pptable(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_v11_0_setup_pptable(smu); |
| if (ret) |
| return ret; |
| |
| ret = navi10_store_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = navi10_append_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| ret = navi10_check_powerplay_table(smu); |
| if (ret) |
| return ret; |
| |
| return ret; |
| } |
| |
| static int navi10_tables_init(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *tables = smu_table->tables; |
| struct smu_table *dummy_read_1_table = |
| &smu_table->dummy_read_1_table; |
| |
| SMU_TABLE_INIT(tables, SMU_TABLE_PPTABLE, sizeof(PPTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_NV1X_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_I2C_COMMANDS, sizeof(SwI2cRequest_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_OVERDRIVE, sizeof(OverDriveTable_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_PMSTATUSLOG, SMU11_TOOL_SIZE, |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_ACTIVITY_MONITOR_COEFF, |
| sizeof(DpmActivityMonitorCoeffInt_t), PAGE_SIZE, |
| AMDGPU_GEM_DOMAIN_VRAM); |
| SMU_TABLE_INIT(tables, SMU_TABLE_DRIVER_SMU_CONFIG, sizeof(DriverSmuConfig_t), |
| PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); |
| |
| dummy_read_1_table->size = 0x40000; |
| dummy_read_1_table->align = PAGE_SIZE; |
| dummy_read_1_table->domain = AMDGPU_GEM_DOMAIN_VRAM; |
| |
| smu_table->metrics_table = kzalloc(sizeof(SmuMetrics_NV1X_t), |
| GFP_KERNEL); |
| if (!smu_table->metrics_table) |
| goto err0_out; |
| smu_table->metrics_time = 0; |
| |
| smu_table->gpu_metrics_table_size = sizeof(struct gpu_metrics_v1_3); |
| smu_table->gpu_metrics_table = kzalloc(smu_table->gpu_metrics_table_size, GFP_KERNEL); |
| if (!smu_table->gpu_metrics_table) |
| goto err1_out; |
| |
| smu_table->watermarks_table = kzalloc(sizeof(Watermarks_t), GFP_KERNEL); |
| if (!smu_table->watermarks_table) |
| goto err2_out; |
| |
| smu_table->driver_smu_config_table = |
| kzalloc(tables[SMU_TABLE_DRIVER_SMU_CONFIG].size, GFP_KERNEL); |
| if (!smu_table->driver_smu_config_table) |
| goto err3_out; |
| |
| return 0; |
| |
| err3_out: |
| kfree(smu_table->watermarks_table); |
| err2_out: |
| kfree(smu_table->gpu_metrics_table); |
| err1_out: |
| kfree(smu_table->metrics_table); |
| err0_out: |
| return -ENOMEM; |
| } |
| |
| static int navi10_get_legacy_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| SmuMetrics_legacy_t *metrics = |
| (SmuMetrics_legacy_t *)smu_table->metrics_table; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| false); |
| if (ret) |
| return ret; |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = metrics->CurrClock[PPCLK_VCLK]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = metrics->CurrClock[PPCLK_DCLK]; |
| break; |
| case METRICS_CURR_DCEFCLK: |
| *value = metrics->CurrClock[PPCLK_DCEFCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| *value = metrics->AverageGfxclkFrequency; |
| break; |
| case METRICS_AVERAGE_SOCCLK: |
| *value = metrics->AverageSocclkFrequency; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = metrics->AverageUclkFrequency; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = metrics->TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = metrics->TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = metrics->TemperatureMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = metrics->TemperatureVrGfx * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = metrics->TemperatureVrSoc * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = metrics->ThrottlerStatus; |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = metrics->CurrFanSpeed; |
| break; |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| SmuMetrics_t *metrics = |
| (SmuMetrics_t *)smu_table->metrics_table; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| false); |
| if (ret) |
| return ret; |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = metrics->CurrClock[PPCLK_VCLK]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = metrics->CurrClock[PPCLK_DCLK]; |
| break; |
| case METRICS_CURR_DCEFCLK: |
| *value = metrics->CurrClock[PPCLK_DCEFCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| if (metrics->AverageGfxActivity > SMU_11_0_GFX_BUSY_THRESHOLD) |
| *value = metrics->AverageGfxclkFrequencyPreDs; |
| else |
| *value = metrics->AverageGfxclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_SOCCLK: |
| *value = metrics->AverageSocclkFrequency; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = metrics->AverageUclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = metrics->TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = metrics->TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = metrics->TemperatureMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = metrics->TemperatureVrGfx * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = metrics->TemperatureVrSoc * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = metrics->ThrottlerStatus; |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = metrics->CurrFanSpeed; |
| break; |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi12_get_legacy_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| SmuMetrics_NV12_legacy_t *metrics = |
| (SmuMetrics_NV12_legacy_t *)smu_table->metrics_table; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| false); |
| if (ret) |
| return ret; |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = metrics->CurrClock[PPCLK_VCLK]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = metrics->CurrClock[PPCLK_DCLK]; |
| break; |
| case METRICS_CURR_DCEFCLK: |
| *value = metrics->CurrClock[PPCLK_DCEFCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| *value = metrics->AverageGfxclkFrequency; |
| break; |
| case METRICS_AVERAGE_SOCCLK: |
| *value = metrics->AverageSocclkFrequency; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = metrics->AverageUclkFrequency; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = metrics->TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = metrics->TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = metrics->TemperatureMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = metrics->TemperatureVrGfx * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = metrics->TemperatureVrSoc * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = metrics->ThrottlerStatus; |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = metrics->CurrFanSpeed; |
| break; |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi12_get_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| SmuMetrics_NV12_t *metrics = |
| (SmuMetrics_NV12_t *)smu_table->metrics_table; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| false); |
| if (ret) |
| return ret; |
| |
| switch (member) { |
| case METRICS_CURR_GFXCLK: |
| *value = metrics->CurrClock[PPCLK_GFXCLK]; |
| break; |
| case METRICS_CURR_SOCCLK: |
| *value = metrics->CurrClock[PPCLK_SOCCLK]; |
| break; |
| case METRICS_CURR_UCLK: |
| *value = metrics->CurrClock[PPCLK_UCLK]; |
| break; |
| case METRICS_CURR_VCLK: |
| *value = metrics->CurrClock[PPCLK_VCLK]; |
| break; |
| case METRICS_CURR_DCLK: |
| *value = metrics->CurrClock[PPCLK_DCLK]; |
| break; |
| case METRICS_CURR_DCEFCLK: |
| *value = metrics->CurrClock[PPCLK_DCEFCLK]; |
| break; |
| case METRICS_AVERAGE_GFXCLK: |
| if (metrics->AverageGfxActivity > SMU_11_0_GFX_BUSY_THRESHOLD) |
| *value = metrics->AverageGfxclkFrequencyPreDs; |
| else |
| *value = metrics->AverageGfxclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_SOCCLK: |
| *value = metrics->AverageSocclkFrequency; |
| break; |
| case METRICS_AVERAGE_UCLK: |
| *value = metrics->AverageUclkFrequencyPostDs; |
| break; |
| case METRICS_AVERAGE_GFXACTIVITY: |
| *value = metrics->AverageGfxActivity; |
| break; |
| case METRICS_AVERAGE_MEMACTIVITY: |
| *value = metrics->AverageUclkActivity; |
| break; |
| case METRICS_AVERAGE_SOCKETPOWER: |
| *value = metrics->AverageSocketPower << 8; |
| break; |
| case METRICS_TEMPERATURE_EDGE: |
| *value = metrics->TemperatureEdge * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_HOTSPOT: |
| *value = metrics->TemperatureHotspot * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_MEM: |
| *value = metrics->TemperatureMem * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRGFX: |
| *value = metrics->TemperatureVrGfx * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_TEMPERATURE_VRSOC: |
| *value = metrics->TemperatureVrSoc * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| break; |
| case METRICS_THROTTLER_STATUS: |
| *value = metrics->ThrottlerStatus; |
| break; |
| case METRICS_CURR_FANSPEED: |
| *value = metrics->CurrFanSpeed; |
| break; |
| default: |
| *value = UINT_MAX; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi1x_get_smu_metrics_data(struct smu_context *smu, |
| MetricsMember_t member, |
| uint32_t *value) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 9): |
| if (smu->smc_fw_version > 0x00341C00) |
| ret = navi12_get_smu_metrics_data(smu, member, value); |
| else |
| ret = navi12_get_legacy_smu_metrics_data(smu, member, value); |
| break; |
| case IP_VERSION(11, 0, 0): |
| case IP_VERSION(11, 0, 5): |
| default: |
| if (((amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 5)) && |
| smu->smc_fw_version > 0x00351F00) || |
| ((amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 0)) && |
| smu->smc_fw_version > 0x002A3B00)) |
| ret = navi10_get_smu_metrics_data(smu, member, value); |
| else |
| ret = navi10_get_legacy_smu_metrics_data(smu, member, value); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_allocate_dpm_context(struct smu_context *smu) |
| { |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| |
| smu_dpm->dpm_context = kzalloc(sizeof(struct smu_11_0_dpm_context), |
| GFP_KERNEL); |
| if (!smu_dpm->dpm_context) |
| return -ENOMEM; |
| |
| smu_dpm->dpm_context_size = sizeof(struct smu_11_0_dpm_context); |
| |
| return 0; |
| } |
| |
| static int navi10_init_smc_tables(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = navi10_tables_init(smu); |
| if (ret) |
| return ret; |
| |
| ret = navi10_allocate_dpm_context(smu); |
| if (ret) |
| return ret; |
| |
| return smu_v11_0_init_smc_tables(smu); |
| } |
| |
| static int navi10_set_default_dpm_table(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| PPTable_t *driver_ppt = smu->smu_table.driver_pptable; |
| struct smu_11_0_dpm_table *dpm_table; |
| int ret = 0; |
| |
| /* socclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.soc_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_SOCCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_SOCCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.socclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* gfxclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.gfx_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_GFXCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_GFXCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_GFXCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.gfxclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* uclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.uclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_UCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_UCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.uclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* vclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.vclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_VCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_VCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.vclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* dclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.dclk_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_DCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_DCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* dcefclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.dcef_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_DCEFCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_DCEFCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* pixelclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.pixel_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_PIXCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_PIXCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* displayclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.display_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_DISPCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_DISPCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| /* phyclk dpm table setup */ |
| dpm_table = &dpm_context->dpm_tables.phy_table; |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| ret = smu_v11_0_set_single_dpm_table(smu, |
| SMU_PHYCLK, |
| dpm_table); |
| if (ret) |
| return ret; |
| dpm_table->is_fine_grained = |
| !driver_ppt->DpmDescriptor[PPCLK_PHYCLK].SnapToDiscrete; |
| } else { |
| dpm_table->count = 1; |
| dpm_table->dpm_levels[0].value = smu->smu_table.boot_values.dcefclk / 100; |
| dpm_table->dpm_levels[0].enabled = true; |
| dpm_table->min = dpm_table->dpm_levels[0].value; |
| dpm_table->max = dpm_table->dpm_levels[0].value; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_dpm_set_vcn_enable(struct smu_context *smu, bool enable) |
| { |
| int ret = 0; |
| |
| if (enable) { |
| /* vcn dpm on is a prerequisite for vcn power gate messages */ |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1, NULL); |
| if (ret) |
| return ret; |
| } |
| } else { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PowerDownVcn, NULL); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_dpm_set_jpeg_enable(struct smu_context *smu, bool enable) |
| { |
| int ret = 0; |
| |
| if (enable) { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_JPEG_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PowerUpJpeg, NULL); |
| if (ret) |
| return ret; |
| } |
| } else { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_JPEG_PG_BIT)) { |
| ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PowerDownJpeg, NULL); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_current_clk_freq_by_table(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| uint32_t *value) |
| { |
| MetricsMember_t member_type; |
| int clk_id = 0; |
| |
| clk_id = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_CLK, |
| clk_type); |
| if (clk_id < 0) |
| return clk_id; |
| |
| switch (clk_id) { |
| case PPCLK_GFXCLK: |
| member_type = METRICS_CURR_GFXCLK; |
| break; |
| case PPCLK_UCLK: |
| member_type = METRICS_CURR_UCLK; |
| break; |
| case PPCLK_SOCCLK: |
| member_type = METRICS_CURR_SOCCLK; |
| break; |
| case PPCLK_VCLK: |
| member_type = METRICS_CURR_VCLK; |
| break; |
| case PPCLK_DCLK: |
| member_type = METRICS_CURR_DCLK; |
| break; |
| case PPCLK_DCEFCLK: |
| member_type = METRICS_CURR_DCEFCLK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return navi1x_get_smu_metrics_data(smu, |
| member_type, |
| value); |
| } |
| |
| static int navi10_is_support_fine_grained_dpm(struct smu_context *smu, enum smu_clk_type clk_type) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| DpmDescriptor_t *dpm_desc = NULL; |
| int clk_index = 0; |
| |
| clk_index = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_CLK, |
| clk_type); |
| if (clk_index < 0) |
| return clk_index; |
| |
| dpm_desc = &pptable->DpmDescriptor[clk_index]; |
| |
| /* 0 - Fine grained DPM, 1 - Discrete DPM */ |
| return dpm_desc->SnapToDiscrete == 0 ? 1 : 0; |
| } |
| |
| static inline bool navi10_od_feature_is_supported(struct smu_11_0_overdrive_table *od_table, enum SMU_11_0_ODFEATURE_CAP cap) |
| { |
| return od_table->cap[cap]; |
| } |
| |
| static void navi10_od_setting_get_range(struct smu_11_0_overdrive_table *od_table, |
| enum SMU_11_0_ODSETTING_ID setting, |
| uint32_t *min, uint32_t *max) |
| { |
| if (min) |
| *min = od_table->min[setting]; |
| if (max) |
| *max = od_table->max[setting]; |
| } |
| |
| static int navi10_emit_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| char *buf, |
| int *offset) |
| { |
| uint16_t *curve_settings; |
| int ret = 0; |
| uint32_t cur_value = 0, value = 0; |
| uint32_t freq_values[3] = {0}; |
| uint32_t i, levels, mark_index = 0, count = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| uint32_t gen_speed, lane_width; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| PPTable_t *pptable = (PPTable_t *)table_context->driver_pptable; |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)table_context->overdrive_table; |
| struct smu_11_0_overdrive_table *od_settings = smu->od_settings; |
| uint32_t min_value, max_value; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| case SMU_VCLK: |
| case SMU_DCLK: |
| case SMU_DCEFCLK: |
| ret = navi10_get_current_clk_freq_by_table(smu, clk_type, &cur_value); |
| if (ret) |
| return ret; |
| |
| ret = smu_v11_0_get_dpm_level_count(smu, clk_type, &count); |
| if (ret) |
| return ret; |
| |
| ret = navi10_is_support_fine_grained_dpm(smu, clk_type); |
| if (ret < 0) |
| return ret; |
| |
| if (!ret) { |
| for (i = 0; i < count; i++) { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, |
| clk_type, i, &value); |
| if (ret) |
| return ret; |
| |
| *offset += sysfs_emit_at(buf, *offset, |
| "%d: %uMhz %s\n", |
| i, value, |
| cur_value == value ? "*" : ""); |
| } |
| } else { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, |
| clk_type, 0, &freq_values[0]); |
| if (ret) |
| return ret; |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, |
| clk_type, |
| count - 1, |
| &freq_values[2]); |
| if (ret) |
| return ret; |
| |
| freq_values[1] = cur_value; |
| mark_index = cur_value == freq_values[0] ? 0 : |
| cur_value == freq_values[2] ? 2 : 1; |
| |
| levels = 3; |
| if (mark_index != 1) { |
| levels = 2; |
| freq_values[1] = freq_values[2]; |
| } |
| |
| for (i = 0; i < levels; i++) { |
| *offset += sysfs_emit_at(buf, *offset, |
| "%d: %uMhz %s\n", |
| i, freq_values[i], |
| i == mark_index ? "*" : ""); |
| } |
| } |
| break; |
| case SMU_PCIE: |
| gen_speed = smu_v11_0_get_current_pcie_link_speed_level(smu); |
| lane_width = smu_v11_0_get_current_pcie_link_width_level(smu); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) { |
| *offset += sysfs_emit_at(buf, *offset, "%d: %s %s %dMhz %s\n", i, |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 0) ? "2.5GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 1) ? "5.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 2) ? "8.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 3) ? "16.0GT/s," : "", |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 1) ? "x1" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 2) ? "x2" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 3) ? "x4" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 4) ? "x8" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 5) ? "x12" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 6) ? "x16" : "", |
| pptable->LclkFreq[i], |
| (gen_speed == dpm_context->dpm_tables.pcie_table.pcie_gen[i]) && |
| (lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ? |
| "*" : ""); |
| } |
| break; |
| case SMU_OD_SCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| return -EOPNOTSUPP; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) |
| break; |
| *offset += sysfs_emit_at(buf, *offset, "OD_SCLK:\n0: %uMhz\n1: %uMhz\n", |
| od_table->GfxclkFmin, od_table->GfxclkFmax); |
| break; |
| case SMU_OD_MCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| return -EOPNOTSUPP; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) |
| break; |
| *offset += sysfs_emit_at(buf, *offset, "OD_MCLK:\n1: %uMHz\n", od_table->UclkFmax); |
| break; |
| case SMU_OD_VDDC_CURVE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| return -EOPNOTSUPP; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) |
| break; |
| *offset += sysfs_emit_at(buf, *offset, "OD_VDDC_CURVE:\n"); |
| for (i = 0; i < 3; i++) { |
| switch (i) { |
| case 0: |
| curve_settings = &od_table->GfxclkFreq1; |
| break; |
| case 1: |
| curve_settings = &od_table->GfxclkFreq2; |
| break; |
| case 2: |
| curve_settings = &od_table->GfxclkFreq3; |
| break; |
| } |
| *offset += sysfs_emit_at(buf, *offset, "%d: %uMHz %umV\n", |
| i, curve_settings[0], |
| curve_settings[1] / NAVI10_VOLTAGE_SCALE); |
| } |
| break; |
| case SMU_OD_RANGE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| return -EOPNOTSUPP; |
| *offset += sysfs_emit_at(buf, *offset, "%s:\n", "OD_RANGE"); |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMIN, |
| &min_value, NULL); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMAX, |
| NULL, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, "SCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_UCLKFMAX, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, "MCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) { |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P1, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_SCLK[0]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P1, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_VOLT[0]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P2, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_SCLK[1]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P2, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_VOLT[1]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P3, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_SCLK[2]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, |
| SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P3, |
| &min_value, &max_value); |
| *offset += sysfs_emit_at(buf, *offset, |
| "VDDC_CURVE_VOLT[2]: %7dmV %11dmV\n", |
| min_value, max_value); |
| } |
| |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_print_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, char *buf) |
| { |
| uint16_t *curve_settings; |
| int i, levels, size = 0, ret = 0; |
| uint32_t cur_value = 0, value = 0, count = 0; |
| uint32_t freq_values[3] = {0}; |
| uint32_t mark_index = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| uint32_t gen_speed, lane_width; |
| struct smu_dpm_context *smu_dpm = &smu->smu_dpm; |
| struct smu_11_0_dpm_context *dpm_context = smu_dpm->dpm_context; |
| PPTable_t *pptable = (PPTable_t *)table_context->driver_pptable; |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)table_context->overdrive_table; |
| struct smu_11_0_overdrive_table *od_settings = smu->od_settings; |
| uint32_t min_value, max_value; |
| |
| smu_cmn_get_sysfs_buf(&buf, &size); |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| case SMU_VCLK: |
| case SMU_DCLK: |
| case SMU_DCEFCLK: |
| ret = navi10_get_current_clk_freq_by_table(smu, clk_type, &cur_value); |
| if (ret) |
| return size; |
| |
| ret = smu_v11_0_get_dpm_level_count(smu, clk_type, &count); |
| if (ret) |
| return size; |
| |
| ret = navi10_is_support_fine_grained_dpm(smu, clk_type); |
| if (ret < 0) |
| return ret; |
| |
| if (!ret) { |
| for (i = 0; i < count; i++) { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, i, &value); |
| if (ret) |
| return size; |
| |
| size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, value, |
| cur_value == value ? "*" : ""); |
| } |
| } else { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, 0, &freq_values[0]); |
| if (ret) |
| return size; |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, count - 1, &freq_values[2]); |
| if (ret) |
| return size; |
| |
| freq_values[1] = cur_value; |
| mark_index = cur_value == freq_values[0] ? 0 : |
| cur_value == freq_values[2] ? 2 : 1; |
| |
| levels = 3; |
| if (mark_index != 1) { |
| levels = 2; |
| freq_values[1] = freq_values[2]; |
| } |
| |
| for (i = 0; i < levels; i++) { |
| size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, freq_values[i], |
| i == mark_index ? "*" : ""); |
| } |
| } |
| break; |
| case SMU_PCIE: |
| gen_speed = smu_v11_0_get_current_pcie_link_speed_level(smu); |
| lane_width = smu_v11_0_get_current_pcie_link_width_level(smu); |
| for (i = 0; i < NUM_LINK_LEVELS; i++) |
| size += sysfs_emit_at(buf, size, "%d: %s %s %dMhz %s\n", i, |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 0) ? "2.5GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 1) ? "5.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 2) ? "8.0GT/s," : |
| (dpm_context->dpm_tables.pcie_table.pcie_gen[i] == 3) ? "16.0GT/s," : "", |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 1) ? "x1" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 2) ? "x2" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 3) ? "x4" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 4) ? "x8" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 5) ? "x12" : |
| (dpm_context->dpm_tables.pcie_table.pcie_lane[i] == 6) ? "x16" : "", |
| pptable->LclkFreq[i], |
| (gen_speed == dpm_context->dpm_tables.pcie_table.pcie_gen[i]) && |
| (lane_width == dpm_context->dpm_tables.pcie_table.pcie_lane[i]) ? |
| "*" : ""); |
| break; |
| case SMU_OD_SCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) |
| break; |
| size += sysfs_emit_at(buf, size, "OD_SCLK:\n"); |
| size += sysfs_emit_at(buf, size, "0: %uMhz\n1: %uMhz\n", |
| od_table->GfxclkFmin, od_table->GfxclkFmax); |
| break; |
| case SMU_OD_MCLK: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) |
| break; |
| size += sysfs_emit_at(buf, size, "OD_MCLK:\n"); |
| size += sysfs_emit_at(buf, size, "1: %uMHz\n", od_table->UclkFmax); |
| break; |
| case SMU_OD_VDDC_CURVE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) |
| break; |
| size += sysfs_emit_at(buf, size, "OD_VDDC_CURVE:\n"); |
| for (i = 0; i < 3; i++) { |
| switch (i) { |
| case 0: |
| curve_settings = &od_table->GfxclkFreq1; |
| break; |
| case 1: |
| curve_settings = &od_table->GfxclkFreq2; |
| break; |
| case 2: |
| curve_settings = &od_table->GfxclkFreq3; |
| break; |
| } |
| size += sysfs_emit_at(buf, size, "%d: %uMHz %umV\n", |
| i, curve_settings[0], |
| curve_settings[1] / NAVI10_VOLTAGE_SCALE); |
| } |
| break; |
| case SMU_OD_RANGE: |
| if (!smu->od_enabled || !od_table || !od_settings) |
| break; |
| size += sysfs_emit_at(buf, size, "%s:\n", "OD_RANGE"); |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMIN, |
| &min_value, NULL); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_GFXCLKFMAX, |
| NULL, &max_value); |
| size += sysfs_emit_at(buf, size, "SCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_UCLKFMAX, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "MCLK: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| } |
| |
| if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) { |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P1, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_SCLK[0]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P1, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_VOLT[0]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P2, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_SCLK[1]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P2, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_VOLT[1]: %7dmV %11dmV\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P3, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_SCLK[2]: %7uMhz %10uMhz\n", |
| min_value, max_value); |
| navi10_od_setting_get_range(od_settings, SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P3, |
| &min_value, &max_value); |
| size += sysfs_emit_at(buf, size, "VDDC_CURVE_VOLT[2]: %7dmV %11dmV\n", |
| min_value, max_value); |
| } |
| |
| break; |
| default: |
| break; |
| } |
| |
| return size; |
| } |
| |
| static int navi10_force_clk_levels(struct smu_context *smu, |
| enum smu_clk_type clk_type, uint32_t mask) |
| { |
| |
| int ret = 0; |
| uint32_t soft_min_level = 0, soft_max_level = 0, min_freq = 0, max_freq = 0; |
| |
| soft_min_level = mask ? (ffs(mask) - 1) : 0; |
| soft_max_level = mask ? (fls(mask) - 1) : 0; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_SCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| case SMU_FCLK: |
| /* There is only 2 levels for fine grained DPM */ |
| ret = navi10_is_support_fine_grained_dpm(smu, clk_type); |
| if (ret < 0) |
| return ret; |
| |
| if (ret) { |
| soft_max_level = (soft_max_level >= 1 ? 1 : 0); |
| soft_min_level = (soft_min_level >= 1 ? 1 : 0); |
| } |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, soft_min_level, &min_freq); |
| if (ret) |
| return 0; |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, soft_max_level, &max_freq); |
| if (ret) |
| return 0; |
| |
| ret = smu_v11_0_set_soft_freq_limited_range(smu, clk_type, min_freq, max_freq); |
| if (ret) |
| return 0; |
| break; |
| case SMU_DCEFCLK: |
| dev_info(smu->adev->dev, "Setting DCEFCLK min/max dpm level is not supported!\n"); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_populate_umd_state_clk(struct smu_context *smu) |
| { |
| struct smu_11_0_dpm_context *dpm_context = |
| smu->smu_dpm.dpm_context; |
| struct smu_11_0_dpm_table *gfx_table = |
| &dpm_context->dpm_tables.gfx_table; |
| struct smu_11_0_dpm_table *mem_table = |
| &dpm_context->dpm_tables.uclk_table; |
| struct smu_11_0_dpm_table *soc_table = |
| &dpm_context->dpm_tables.soc_table; |
| struct smu_umd_pstate_table *pstate_table = |
| &smu->pstate_table; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t sclk_freq; |
| |
| pstate_table->gfxclk_pstate.min = gfx_table->min; |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 0): |
| switch (adev->pdev->revision) { |
| case 0xf0: /* XTX */ |
| case 0xc0: |
| sclk_freq = NAVI10_PEAK_SCLK_XTX; |
| break; |
| case 0xf1: /* XT */ |
| case 0xc1: |
| sclk_freq = NAVI10_PEAK_SCLK_XT; |
| break; |
| default: /* XL */ |
| sclk_freq = NAVI10_PEAK_SCLK_XL; |
| break; |
| } |
| break; |
| case IP_VERSION(11, 0, 5): |
| switch (adev->pdev->revision) { |
| case 0xc7: /* XT */ |
| case 0xf4: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XT_GFXCLK; |
| break; |
| case 0xc1: /* XTM */ |
| case 0xf2: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XTM_GFXCLK; |
| break; |
| case 0xc3: /* XLM */ |
| case 0xf3: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK; |
| break; |
| case 0xc5: /* XTX */ |
| case 0xf6: |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK; |
| break; |
| default: /* XL */ |
| sclk_freq = NAVI14_UMD_PSTATE_PEAK_XL_GFXCLK; |
| break; |
| } |
| break; |
| case IP_VERSION(11, 0, 9): |
| sclk_freq = NAVI12_UMD_PSTATE_PEAK_GFXCLK; |
| break; |
| default: |
| sclk_freq = gfx_table->dpm_levels[gfx_table->count - 1].value; |
| break; |
| } |
| pstate_table->gfxclk_pstate.peak = sclk_freq; |
| |
| pstate_table->uclk_pstate.min = mem_table->min; |
| pstate_table->uclk_pstate.peak = mem_table->max; |
| |
| pstate_table->socclk_pstate.min = soc_table->min; |
| pstate_table->socclk_pstate.peak = soc_table->max; |
| |
| if (gfx_table->max > NAVI10_UMD_PSTATE_PROFILING_GFXCLK && |
| mem_table->max > NAVI10_UMD_PSTATE_PROFILING_MEMCLK && |
| soc_table->max > NAVI10_UMD_PSTATE_PROFILING_SOCCLK) { |
| pstate_table->gfxclk_pstate.standard = |
| NAVI10_UMD_PSTATE_PROFILING_GFXCLK; |
| pstate_table->uclk_pstate.standard = |
| NAVI10_UMD_PSTATE_PROFILING_MEMCLK; |
| pstate_table->socclk_pstate.standard = |
| NAVI10_UMD_PSTATE_PROFILING_SOCCLK; |
| } else { |
| pstate_table->gfxclk_pstate.standard = |
| pstate_table->gfxclk_pstate.min; |
| pstate_table->uclk_pstate.standard = |
| pstate_table->uclk_pstate.min; |
| pstate_table->socclk_pstate.standard = |
| pstate_table->socclk_pstate.min; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_get_clock_by_type_with_latency(struct smu_context *smu, |
| enum smu_clk_type clk_type, |
| struct pp_clock_levels_with_latency *clocks) |
| { |
| int ret = 0, i = 0; |
| uint32_t level_count = 0, freq = 0; |
| |
| switch (clk_type) { |
| case SMU_GFXCLK: |
| case SMU_DCEFCLK: |
| case SMU_SOCCLK: |
| case SMU_MCLK: |
| case SMU_UCLK: |
| ret = smu_v11_0_get_dpm_level_count(smu, clk_type, &level_count); |
| if (ret) |
| return ret; |
| |
| level_count = min(level_count, (uint32_t)MAX_NUM_CLOCKS); |
| clocks->num_levels = level_count; |
| |
| for (i = 0; i < level_count; i++) { |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, clk_type, i, &freq); |
| if (ret) |
| return ret; |
| |
| clocks->data[i].clocks_in_khz = freq * 1000; |
| clocks->data[i].latency_in_us = 0; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_pre_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint32_t max_freq = 0; |
| |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, 0, NULL); |
| if (ret) |
| return ret; |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_get_dpm_ultimate_freq(smu, SMU_UCLK, NULL, &max_freq); |
| if (ret) |
| return ret; |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, 0, max_freq); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_display_config_changed(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT) && |
| smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_SOCCLK_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_NumOfDisplays, |
| smu->display_config->num_display, |
| NULL); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static bool navi10_is_dpm_running(struct smu_context *smu) |
| { |
| int ret = 0; |
| uint64_t feature_enabled; |
| |
| ret = smu_cmn_get_enabled_mask(smu, &feature_enabled); |
| if (ret) |
| return false; |
| |
| return !!(feature_enabled & SMC_DPM_FEATURE); |
| } |
| |
| static int navi10_get_fan_speed_rpm(struct smu_context *smu, |
| uint32_t *speed) |
| { |
| int ret = 0; |
| |
| if (!speed) |
| return -EINVAL; |
| |
| switch (smu_v11_0_get_fan_control_mode(smu)) { |
| case AMD_FAN_CTRL_AUTO: |
| ret = navi10_get_smu_metrics_data(smu, |
| METRICS_CURR_FANSPEED, |
| speed); |
| break; |
| default: |
| ret = smu_v11_0_get_fan_speed_rpm(smu, |
| speed); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_fan_parameters(struct smu_context *smu) |
| { |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| |
| smu->fan_max_rpm = pptable->FanMaximumRpm; |
| |
| return 0; |
| } |
| |
| static int navi10_get_power_profile_mode(struct smu_context *smu, char *buf) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| uint32_t i, size = 0; |
| int16_t workload_type = 0; |
| static const char *title[] = { |
| "PROFILE_INDEX(NAME)", |
| "CLOCK_TYPE(NAME)", |
| "FPS", |
| "MinFreqType", |
| "MinActiveFreqType", |
| "MinActiveFreq", |
| "BoosterFreqType", |
| "BoosterFreq", |
| "PD_Data_limit_c", |
| "PD_Data_error_coeff", |
| "PD_Data_error_rate_coeff"}; |
| int result = 0; |
| |
| if (!buf) |
| return -EINVAL; |
| |
| size += sysfs_emit_at(buf, size, "%16s %s %s %s %s %s %s %s %s %s %s\n", |
| title[0], title[1], title[2], title[3], title[4], title[5], |
| title[6], title[7], title[8], title[9], title[10]); |
| |
| for (i = 0; i <= PP_SMC_POWER_PROFILE_CUSTOM; i++) { |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| i); |
| if (workload_type < 0) |
| return -EINVAL; |
| |
| result = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, workload_type, |
| (void *)(&activity_monitor), false); |
| if (result) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return result; |
| } |
| |
| size += sysfs_emit_at(buf, size, "%2d %14s%s:\n", |
| i, amdgpu_pp_profile_name[i], (i == smu->power_profile_mode) ? "*" : " "); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 0, |
| "GFXCLK", |
| activity_monitor.Gfx_FPS, |
| activity_monitor.Gfx_MinFreqStep, |
| activity_monitor.Gfx_MinActiveFreqType, |
| activity_monitor.Gfx_MinActiveFreq, |
| activity_monitor.Gfx_BoosterFreqType, |
| activity_monitor.Gfx_BoosterFreq, |
| activity_monitor.Gfx_PD_Data_limit_c, |
| activity_monitor.Gfx_PD_Data_error_coeff, |
| activity_monitor.Gfx_PD_Data_error_rate_coeff); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 1, |
| "SOCCLK", |
| activity_monitor.Soc_FPS, |
| activity_monitor.Soc_MinFreqStep, |
| activity_monitor.Soc_MinActiveFreqType, |
| activity_monitor.Soc_MinActiveFreq, |
| activity_monitor.Soc_BoosterFreqType, |
| activity_monitor.Soc_BoosterFreq, |
| activity_monitor.Soc_PD_Data_limit_c, |
| activity_monitor.Soc_PD_Data_error_coeff, |
| activity_monitor.Soc_PD_Data_error_rate_coeff); |
| |
| size += sysfs_emit_at(buf, size, "%19s %d(%13s) %7d %7d %7d %7d %7d %7d %7d %7d %7d\n", |
| " ", |
| 2, |
| "MEMCLK", |
| activity_monitor.Mem_FPS, |
| activity_monitor.Mem_MinFreqStep, |
| activity_monitor.Mem_MinActiveFreqType, |
| activity_monitor.Mem_MinActiveFreq, |
| activity_monitor.Mem_BoosterFreqType, |
| activity_monitor.Mem_BoosterFreq, |
| activity_monitor.Mem_PD_Data_limit_c, |
| activity_monitor.Mem_PD_Data_error_coeff, |
| activity_monitor.Mem_PD_Data_error_rate_coeff); |
| } |
| |
| return size; |
| } |
| |
| static int navi10_set_power_profile_mode(struct smu_context *smu, long *input, uint32_t size) |
| { |
| DpmActivityMonitorCoeffInt_t activity_monitor; |
| int workload_type, ret = 0; |
| |
| smu->power_profile_mode = input[size]; |
| |
| if (smu->power_profile_mode > PP_SMC_POWER_PROFILE_CUSTOM) { |
| dev_err(smu->adev->dev, "Invalid power profile mode %d\n", smu->power_profile_mode); |
| return -EINVAL; |
| } |
| |
| if (smu->power_profile_mode == PP_SMC_POWER_PROFILE_CUSTOM) { |
| if (size != 10) |
| return -EINVAL; |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), false); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to get activity monitor!", __func__); |
| return ret; |
| } |
| |
| switch (input[0]) { |
| case 0: /* Gfxclk */ |
| activity_monitor.Gfx_FPS = input[1]; |
| activity_monitor.Gfx_MinFreqStep = input[2]; |
| activity_monitor.Gfx_MinActiveFreqType = input[3]; |
| activity_monitor.Gfx_MinActiveFreq = input[4]; |
| activity_monitor.Gfx_BoosterFreqType = input[5]; |
| activity_monitor.Gfx_BoosterFreq = input[6]; |
| activity_monitor.Gfx_PD_Data_limit_c = input[7]; |
| activity_monitor.Gfx_PD_Data_error_coeff = input[8]; |
| activity_monitor.Gfx_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 1: /* Socclk */ |
| activity_monitor.Soc_FPS = input[1]; |
| activity_monitor.Soc_MinFreqStep = input[2]; |
| activity_monitor.Soc_MinActiveFreqType = input[3]; |
| activity_monitor.Soc_MinActiveFreq = input[4]; |
| activity_monitor.Soc_BoosterFreqType = input[5]; |
| activity_monitor.Soc_BoosterFreq = input[6]; |
| activity_monitor.Soc_PD_Data_limit_c = input[7]; |
| activity_monitor.Soc_PD_Data_error_coeff = input[8]; |
| activity_monitor.Soc_PD_Data_error_rate_coeff = input[9]; |
| break; |
| case 2: /* Memclk */ |
| activity_monitor.Mem_FPS = input[1]; |
| activity_monitor.Mem_MinFreqStep = input[2]; |
| activity_monitor.Mem_MinActiveFreqType = input[3]; |
| activity_monitor.Mem_MinActiveFreq = input[4]; |
| activity_monitor.Mem_BoosterFreqType = input[5]; |
| activity_monitor.Mem_BoosterFreq = input[6]; |
| activity_monitor.Mem_PD_Data_limit_c = input[7]; |
| activity_monitor.Mem_PD_Data_error_coeff = input[8]; |
| activity_monitor.Mem_PD_Data_error_rate_coeff = input[9]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = smu_cmn_update_table(smu, |
| SMU_TABLE_ACTIVITY_MONITOR_COEFF, WORKLOAD_PPLIB_CUSTOM_BIT, |
| (void *)(&activity_monitor), true); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Failed to set activity monitor!", __func__); |
| return ret; |
| } |
| } |
| |
| /* conv PP_SMC_POWER_PROFILE* to WORKLOAD_PPLIB_*_BIT */ |
| workload_type = smu_cmn_to_asic_specific_index(smu, |
| CMN2ASIC_MAPPING_WORKLOAD, |
| smu->power_profile_mode); |
| if (workload_type < 0) |
| return -EINVAL; |
| ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetWorkloadMask, |
| 1 << workload_type, NULL); |
| if (ret) |
| dev_err(smu->adev->dev, "[%s] Failed to set work load mask!", __func__); |
| |
| return ret; |
| } |
| |
| static int navi10_notify_smc_display_config(struct smu_context *smu) |
| { |
| struct smu_clocks min_clocks = {0}; |
| struct pp_display_clock_request clock_req; |
| int ret = 0; |
| |
| min_clocks.dcef_clock = smu->display_config->min_dcef_set_clk; |
| min_clocks.dcef_clock_in_sr = smu->display_config->min_dcef_deep_sleep_set_clk; |
| min_clocks.memory_clock = smu->display_config->min_mem_set_clock; |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_DCEFCLK_BIT)) { |
| clock_req.clock_type = amd_pp_dcef_clock; |
| clock_req.clock_freq_in_khz = min_clocks.dcef_clock * 10; |
| |
| ret = smu_v11_0_display_clock_voltage_request(smu, &clock_req); |
| if (!ret) { |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DS_DCEFCLK_BIT)) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetMinDeepSleepDcefclk, |
| min_clocks.dcef_clock_in_sr/100, |
| NULL); |
| if (ret) { |
| dev_err(smu->adev->dev, "Attempt to set divider for DCEFCLK Failed!"); |
| return ret; |
| } |
| } |
| } else { |
| dev_info(smu->adev->dev, "Attempt to set Hard Min for DCEFCLK Failed!"); |
| } |
| } |
| |
| if (smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) { |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, min_clocks.memory_clock/100, 0); |
| if (ret) { |
| dev_err(smu->adev->dev, "[%s] Set hard min uclk failed!", __func__); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_set_watermarks_table(struct smu_context *smu, |
| struct pp_smu_wm_range_sets *clock_ranges) |
| { |
| Watermarks_t *table = smu->smu_table.watermarks_table; |
| int ret = 0; |
| int i; |
| |
| if (clock_ranges) { |
| if (clock_ranges->num_reader_wm_sets > NUM_WM_RANGES || |
| clock_ranges->num_writer_wm_sets > NUM_WM_RANGES) |
| return -EINVAL; |
| |
| for (i = 0; i < clock_ranges->num_reader_wm_sets; i++) { |
| table->WatermarkRow[WM_DCEFCLK][i].MinClock = |
| clock_ranges->reader_wm_sets[i].min_drain_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MaxClock = |
| clock_ranges->reader_wm_sets[i].max_drain_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MinUclk = |
| clock_ranges->reader_wm_sets[i].min_fill_clk_mhz; |
| table->WatermarkRow[WM_DCEFCLK][i].MaxUclk = |
| clock_ranges->reader_wm_sets[i].max_fill_clk_mhz; |
| |
| table->WatermarkRow[WM_DCEFCLK][i].WmSetting = |
| clock_ranges->reader_wm_sets[i].wm_inst; |
| } |
| |
| for (i = 0; i < clock_ranges->num_writer_wm_sets; i++) { |
| table->WatermarkRow[WM_SOCCLK][i].MinClock = |
| clock_ranges->writer_wm_sets[i].min_fill_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MaxClock = |
| clock_ranges->writer_wm_sets[i].max_fill_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MinUclk = |
| clock_ranges->writer_wm_sets[i].min_drain_clk_mhz; |
| table->WatermarkRow[WM_SOCCLK][i].MaxUclk = |
| clock_ranges->writer_wm_sets[i].max_drain_clk_mhz; |
| |
| table->WatermarkRow[WM_SOCCLK][i].WmSetting = |
| clock_ranges->writer_wm_sets[i].wm_inst; |
| } |
| |
| smu->watermarks_bitmap |= WATERMARKS_EXIST; |
| } |
| |
| /* pass data to smu controller */ |
| if ((smu->watermarks_bitmap & WATERMARKS_EXIST) && |
| !(smu->watermarks_bitmap & WATERMARKS_LOADED)) { |
| ret = smu_cmn_write_watermarks_table(smu); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to update WMTABLE!"); |
| return ret; |
| } |
| smu->watermarks_bitmap |= WATERMARKS_LOADED; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_read_sensor(struct smu_context *smu, |
| enum amd_pp_sensors sensor, |
| void *data, uint32_t *size) |
| { |
| int ret = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *pptable = table_context->driver_pptable; |
| |
| if (!data || !size) |
| return -EINVAL; |
| |
| switch (sensor) { |
| case AMDGPU_PP_SENSOR_MAX_FAN_RPM: |
| *(uint32_t *)data = pptable->FanMaximumRpm; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_LOAD: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_MEMACTIVITY, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_LOAD: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_GFXACTIVITY, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_AVG_POWER: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_AVERAGE_SOCKETPOWER, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_HOTSPOT_TEMP: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_HOTSPOT, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_EDGE_TEMP: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_EDGE, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_MEM_TEMP: |
| ret = navi1x_get_smu_metrics_data(smu, |
| METRICS_TEMPERATURE_MEM, |
| (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_MCLK: |
| ret = navi10_get_current_clk_freq_by_table(smu, SMU_UCLK, (uint32_t *)data); |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GFX_SCLK: |
| ret = navi1x_get_smu_metrics_data(smu, METRICS_AVERAGE_GFXCLK, (uint32_t *)data); |
| *(uint32_t *)data *= 100; |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_VDDGFX: |
| ret = smu_v11_0_get_gfx_vdd(smu, (uint32_t *)data); |
| *size = 4; |
| break; |
| case AMDGPU_PP_SENSOR_GPU_INPUT_POWER: |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_get_uclk_dpm_states(struct smu_context *smu, uint32_t *clocks_in_khz, uint32_t *num_states) |
| { |
| uint32_t num_discrete_levels = 0; |
| uint16_t *dpm_levels = NULL; |
| uint16_t i = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *driver_ppt = NULL; |
| |
| if (!clocks_in_khz || !num_states || !table_context->driver_pptable) |
| return -EINVAL; |
| |
| driver_ppt = table_context->driver_pptable; |
| num_discrete_levels = driver_ppt->DpmDescriptor[PPCLK_UCLK].NumDiscreteLevels; |
| dpm_levels = driver_ppt->FreqTableUclk; |
| |
| if (num_discrete_levels == 0 || dpm_levels == NULL) |
| return -EINVAL; |
| |
| *num_states = num_discrete_levels; |
| for (i = 0; i < num_discrete_levels; i++) { |
| /* convert to khz */ |
| *clocks_in_khz = (*dpm_levels) * 1000; |
| clocks_in_khz++; |
| dpm_levels++; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_get_thermal_temperature_range(struct smu_context *smu, |
| struct smu_temperature_range *range) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| struct smu_11_0_powerplay_table *powerplay_table = |
| table_context->power_play_table; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| |
| if (!range) |
| return -EINVAL; |
| |
| memcpy(range, &smu11_thermal_policy[0], sizeof(struct smu_temperature_range)); |
| |
| range->max = pptable->TedgeLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_crit_max = pptable->ThotspotLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT) * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_crit_max = pptable->TmemLimit * |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->mem_emergency_max = (pptable->TmemLimit + CTF_OFFSET_MEM)* |
| SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; |
| range->software_shutdown_temp = powerplay_table->software_shutdown_temp; |
| |
| return 0; |
| } |
| |
| static int navi10_display_disable_memory_clock_switch(struct smu_context *smu, |
| bool disable_memory_clock_switch) |
| { |
| int ret = 0; |
| struct smu_11_0_max_sustainable_clocks *max_sustainable_clocks = |
| (struct smu_11_0_max_sustainable_clocks *) |
| smu->smu_table.max_sustainable_clocks; |
| uint32_t min_memory_clock = smu->hard_min_uclk_req_from_dal; |
| uint32_t max_memory_clock = max_sustainable_clocks->uclock; |
| |
| if (smu->disable_uclk_switch == disable_memory_clock_switch) |
| return 0; |
| |
| if (disable_memory_clock_switch) |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, max_memory_clock, 0); |
| else |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, min_memory_clock, 0); |
| |
| if (!ret) |
| smu->disable_uclk_switch = disable_memory_clock_switch; |
| |
| return ret; |
| } |
| |
| static int navi10_get_power_limit(struct smu_context *smu, |
| uint32_t *current_power_limit, |
| uint32_t *default_power_limit, |
| uint32_t *max_power_limit, |
| uint32_t *min_power_limit) |
| { |
| struct smu_11_0_powerplay_table *powerplay_table = |
| (struct smu_11_0_powerplay_table *)smu->smu_table.power_play_table; |
| struct smu_11_0_overdrive_table *od_settings = smu->od_settings; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| uint32_t power_limit, od_percent_upper = 0, od_percent_lower = 0; |
| |
| if (smu_v11_0_get_current_power_limit(smu, &power_limit)) { |
| /* the last hope to figure out the ppt limit */ |
| if (!pptable) { |
| dev_err(smu->adev->dev, "Cannot get PPT limit due to pptable missing!"); |
| return -EINVAL; |
| } |
| power_limit = |
| pptable->SocketPowerLimitAc[PPT_THROTTLER_PPT0]; |
| } |
| |
| if (current_power_limit) |
| *current_power_limit = power_limit; |
| if (default_power_limit) |
| *default_power_limit = power_limit; |
| |
| if (powerplay_table) { |
| if (smu->od_enabled && |
| navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_POWER_LIMIT)) { |
| od_percent_upper = le32_to_cpu(powerplay_table->overdrive_table.max[SMU_11_0_ODSETTING_POWERPERCENTAGE]); |
| od_percent_lower = le32_to_cpu(powerplay_table->overdrive_table.min[SMU_11_0_ODSETTING_POWERPERCENTAGE]); |
| } else if (navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_POWER_LIMIT)) { |
| od_percent_upper = 0; |
| od_percent_lower = le32_to_cpu(powerplay_table->overdrive_table.min[SMU_11_0_ODSETTING_POWERPERCENTAGE]); |
| } |
| } |
| |
| dev_dbg(smu->adev->dev, "od percent upper:%d, od percent lower:%d (default power: %d)\n", |
| od_percent_upper, od_percent_lower, power_limit); |
| |
| if (max_power_limit) { |
| *max_power_limit = power_limit * (100 + od_percent_upper); |
| *max_power_limit /= 100; |
| } |
| |
| if (min_power_limit) { |
| *min_power_limit = power_limit * (100 - od_percent_lower); |
| *min_power_limit /= 100; |
| } |
| |
| return 0; |
| } |
| |
| static int navi10_update_pcie_parameters(struct smu_context *smu, |
| uint8_t pcie_gen_cap, |
| uint8_t pcie_width_cap) |
| { |
| struct smu_11_0_dpm_context *dpm_context = smu->smu_dpm.dpm_context; |
| PPTable_t *pptable = smu->smu_table.driver_pptable; |
| uint32_t smu_pcie_arg; |
| int ret, i; |
| |
| /* lclk dpm table setup */ |
| for (i = 0; i < MAX_PCIE_CONF; i++) { |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = pptable->PcieGenSpeed[i]; |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = pptable->PcieLaneCount[i]; |
| } |
| |
| for (i = 0; i < NUM_LINK_LEVELS; i++) { |
| smu_pcie_arg = (i << 16) | |
| ((pptable->PcieGenSpeed[i] <= pcie_gen_cap) ? (pptable->PcieGenSpeed[i] << 8) : |
| (pcie_gen_cap << 8)) | ((pptable->PcieLaneCount[i] <= pcie_width_cap) ? |
| pptable->PcieLaneCount[i] : pcie_width_cap); |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_OverridePcieParameters, |
| smu_pcie_arg, |
| NULL); |
| |
| if (ret) |
| return ret; |
| |
| if (pptable->PcieGenSpeed[i] > pcie_gen_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_gen[i] = pcie_gen_cap; |
| if (pptable->PcieLaneCount[i] > pcie_width_cap) |
| dpm_context->dpm_tables.pcie_table.pcie_lane[i] = pcie_width_cap; |
| } |
| |
| return 0; |
| } |
| |
| static inline void navi10_dump_od_table(struct smu_context *smu, |
| OverDriveTable_t *od_table) |
| { |
| dev_dbg(smu->adev->dev, "OD: Gfxclk: (%d, %d)\n", od_table->GfxclkFmin, od_table->GfxclkFmax); |
| dev_dbg(smu->adev->dev, "OD: Gfx1: (%d, %d)\n", od_table->GfxclkFreq1, od_table->GfxclkVolt1); |
| dev_dbg(smu->adev->dev, "OD: Gfx2: (%d, %d)\n", od_table->GfxclkFreq2, od_table->GfxclkVolt2); |
| dev_dbg(smu->adev->dev, "OD: Gfx3: (%d, %d)\n", od_table->GfxclkFreq3, od_table->GfxclkVolt3); |
| dev_dbg(smu->adev->dev, "OD: UclkFmax: %d\n", od_table->UclkFmax); |
| dev_dbg(smu->adev->dev, "OD: OverDrivePct: %d\n", od_table->OverDrivePct); |
| } |
| |
| static int navi10_od_setting_check_range(struct smu_context *smu, |
| struct smu_11_0_overdrive_table *od_table, |
| enum SMU_11_0_ODSETTING_ID setting, |
| uint32_t value) |
| { |
| if (value < od_table->min[setting]) { |
| dev_warn(smu->adev->dev, "OD setting (%d, %d) is less than the minimum allowed (%d)\n", setting, value, od_table->min[setting]); |
| return -EINVAL; |
| } |
| if (value > od_table->max[setting]) { |
| dev_warn(smu->adev->dev, "OD setting (%d, %d) is greater than the maximum allowed (%d)\n", setting, value, od_table->max[setting]); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int navi10_overdrive_get_gfx_clk_base_voltage(struct smu_context *smu, |
| uint16_t *voltage, |
| uint32_t freq) |
| { |
| uint32_t param = (freq & 0xFFFF) | (PPCLK_GFXCLK << 16); |
| uint32_t value = 0; |
| int ret; |
| |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_GetVoltageByDpm, |
| param, |
| &value); |
| if (ret) { |
| dev_err(smu->adev->dev, "[GetBaseVoltage] failed to get GFXCLK AVFS voltage from SMU!"); |
| return ret; |
| } |
| |
| *voltage = (uint16_t)value; |
| |
| return 0; |
| } |
| |
| static int navi10_baco_enter(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| /* |
| * This aims the case below: |
| * amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded |
| * |
| * For NAVI10 and later ASICs, we rely on PMFW to handle the runpm. To |
| * make that possible, PMFW needs to acknowledge the dstate transition |
| * process for both gfx(function 0) and audio(function 1) function of |
| * the ASIC. |
| * |
| * The PCI device's initial runpm status is RUNPM_SUSPENDED. So as the |
| * device representing the audio function of the ASIC. And that means |
| * even if the sound driver(snd_hda_intel) was not loaded yet, it's still |
| * possible runpm suspend kicked on the ASIC. However without the dstate |
| * transition notification from audio function, pmfw cannot handle the |
| * BACO in/exit correctly. And that will cause driver hang on runpm |
| * resuming. |
| * |
| * To address this, we revert to legacy message way(driver masters the |
| * timing for BACO in/exit) on sound driver missing. |
| */ |
| if (adev->in_runpm && smu_cmn_is_audio_func_enabled(adev)) |
| return smu_v11_0_baco_set_armd3_sequence(smu, BACO_SEQ_BACO); |
| else |
| return smu_v11_0_baco_enter(smu); |
| } |
| |
| static int navi10_baco_exit(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (adev->in_runpm && smu_cmn_is_audio_func_enabled(adev)) { |
| /* Wait for PMFW handling for the Dstate change */ |
| msleep(10); |
| return smu_v11_0_baco_set_armd3_sequence(smu, BACO_SEQ_ULPS); |
| } else { |
| return smu_v11_0_baco_exit(smu); |
| } |
| } |
| |
| static int navi10_set_default_od_settings(struct smu_context *smu) |
| { |
| OverDriveTable_t *od_table = |
| (OverDriveTable_t *)smu->smu_table.overdrive_table; |
| OverDriveTable_t *boot_od_table = |
| (OverDriveTable_t *)smu->smu_table.boot_overdrive_table; |
| OverDriveTable_t *user_od_table = |
| (OverDriveTable_t *)smu->smu_table.user_overdrive_table; |
| int ret = 0; |
| |
| /* |
| * For S3/S4/Runpm resume, no need to setup those overdrive tables again as |
| * - either they already have the default OD settings got during cold bootup |
| * - or they have some user customized OD settings which cannot be overwritten |
| */ |
| if (smu->adev->in_suspend) |
| return 0; |
| |
| ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE, 0, (void *)boot_od_table, false); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to get overdrive table!\n"); |
| return ret; |
| } |
| |
| if (!boot_od_table->GfxclkVolt1) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &boot_od_table->GfxclkVolt1, |
| boot_od_table->GfxclkFreq1); |
| if (ret) |
| return ret; |
| } |
| |
| if (!boot_od_table->GfxclkVolt2) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &boot_od_table->GfxclkVolt2, |
| boot_od_table->GfxclkFreq2); |
| if (ret) |
| return ret; |
| } |
| |
| if (!boot_od_table->GfxclkVolt3) { |
| ret = navi10_overdrive_get_gfx_clk_base_voltage(smu, |
| &boot_od_table->GfxclkVolt3, |
| boot_od_table->GfxclkFreq3); |
| if (ret) |
| return ret; |
| } |
| |
| navi10_dump_od_table(smu, boot_od_table); |
| |
| memcpy(od_table, boot_od_table, sizeof(OverDriveTable_t)); |
| memcpy(user_od_table, boot_od_table, sizeof(OverDriveTable_t)); |
| |
| return 0; |
| } |
| |
| static int navi10_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TABLE_COMMAND type, long input[], uint32_t size) |
| { |
| int i; |
| int ret = 0; |
| struct smu_table_context *table_context = &smu->smu_table; |
| OverDriveTable_t *od_table; |
| struct smu_11_0_overdrive_table *od_settings; |
| enum SMU_11_0_ODSETTING_ID freq_setting, voltage_setting; |
| uint16_t *freq_ptr, *voltage_ptr; |
| od_table = (OverDriveTable_t *)table_context->overdrive_table; |
| |
| if (!smu->od_enabled) { |
| dev_warn(smu->adev->dev, "OverDrive is not enabled!\n"); |
| return -EINVAL; |
| } |
| |
| if (!smu->od_settings) { |
| dev_err(smu->adev->dev, "OD board limits are not set!\n"); |
| return -ENOENT; |
| } |
| |
| od_settings = smu->od_settings; |
| |
| switch (type) { |
| case PP_OD_EDIT_SCLK_VDDC_TABLE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_LIMITS)) { |
| dev_warn(smu->adev->dev, "GFXCLK_LIMITS not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (!table_context->overdrive_table) { |
| dev_err(smu->adev->dev, "Overdrive is not initialized\n"); |
| return -EINVAL; |
| } |
| for (i = 0; i < size; i += 2) { |
| if (i + 2 > size) { |
| dev_info(smu->adev->dev, "invalid number of input parameters %d\n", size); |
| return -EINVAL; |
| } |
| switch (input[i]) { |
| case 0: |
| freq_setting = SMU_11_0_ODSETTING_GFXCLKFMIN; |
| freq_ptr = &od_table->GfxclkFmin; |
| if (input[i + 1] > od_table->GfxclkFmax) { |
| dev_info(smu->adev->dev, "GfxclkFmin (%ld) must be <= GfxclkFmax (%u)!\n", |
| input[i + 1], |
| od_table->GfxclkFmin); |
| return -EINVAL; |
| } |
| break; |
| case 1: |
| freq_setting = SMU_11_0_ODSETTING_GFXCLKFMAX; |
| freq_ptr = &od_table->GfxclkFmax; |
| if (input[i + 1] < od_table->GfxclkFmin) { |
| dev_info(smu->adev->dev, "GfxclkFmax (%ld) must be >= GfxclkFmin (%u)!\n", |
| input[i + 1], |
| od_table->GfxclkFmax); |
| return -EINVAL; |
| } |
| break; |
| default: |
| dev_info(smu->adev->dev, "Invalid SCLK_VDDC_TABLE index: %ld\n", input[i]); |
| dev_info(smu->adev->dev, "Supported indices: [0:min,1:max]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(smu, od_settings, freq_setting, input[i + 1]); |
| if (ret) |
| return ret; |
| *freq_ptr = input[i + 1]; |
| } |
| break; |
| case PP_OD_EDIT_MCLK_VDDC_TABLE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_UCLK_MAX)) { |
| dev_warn(smu->adev->dev, "UCLK_MAX not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (size < 2) { |
| dev_info(smu->adev->dev, "invalid number of parameters: %d\n", size); |
| return -EINVAL; |
| } |
| if (input[0] != 1) { |
| dev_info(smu->adev->dev, "Invalid MCLK_VDDC_TABLE index: %ld\n", input[0]); |
| dev_info(smu->adev->dev, "Supported indices: [1:max]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(smu, od_settings, SMU_11_0_ODSETTING_UCLKFMAX, input[1]); |
| if (ret) |
| return ret; |
| od_table->UclkFmax = input[1]; |
| break; |
| case PP_OD_RESTORE_DEFAULT_TABLE: |
| if (!(table_context->overdrive_table && table_context->boot_overdrive_table)) { |
| dev_err(smu->adev->dev, "Overdrive table was not initialized!\n"); |
| return -EINVAL; |
| } |
| memcpy(table_context->overdrive_table, table_context->boot_overdrive_table, sizeof(OverDriveTable_t)); |
| break; |
| case PP_OD_COMMIT_DPM_TABLE: |
| if (memcmp(od_table, table_context->user_overdrive_table, sizeof(OverDriveTable_t))) { |
| navi10_dump_od_table(smu, od_table); |
| ret = smu_cmn_update_table(smu, SMU_TABLE_OVERDRIVE, 0, (void *)od_table, true); |
| if (ret) { |
| dev_err(smu->adev->dev, "Failed to import overdrive table!\n"); |
| return ret; |
| } |
| memcpy(table_context->user_overdrive_table, od_table, sizeof(OverDriveTable_t)); |
| smu->user_dpm_profile.user_od = true; |
| |
| if (!memcmp(table_context->user_overdrive_table, |
| table_context->boot_overdrive_table, |
| sizeof(OverDriveTable_t))) |
| smu->user_dpm_profile.user_od = false; |
| } |
| break; |
| case PP_OD_EDIT_VDDC_CURVE: |
| if (!navi10_od_feature_is_supported(od_settings, SMU_11_0_ODCAP_GFXCLK_CURVE)) { |
| dev_warn(smu->adev->dev, "GFXCLK_CURVE not supported!\n"); |
| return -ENOTSUPP; |
| } |
| if (size < 3) { |
| dev_info(smu->adev->dev, "invalid number of parameters: %d\n", size); |
| return -EINVAL; |
| } |
| if (!od_table) { |
| dev_info(smu->adev->dev, "Overdrive is not initialized\n"); |
| return -EINVAL; |
| } |
| |
| switch (input[0]) { |
| case 0: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P1; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P1; |
| freq_ptr = &od_table->GfxclkFreq1; |
| voltage_ptr = &od_table->GfxclkVolt1; |
| break; |
| case 1: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P2; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P2; |
| freq_ptr = &od_table->GfxclkFreq2; |
| voltage_ptr = &od_table->GfxclkVolt2; |
| break; |
| case 2: |
| freq_setting = SMU_11_0_ODSETTING_VDDGFXCURVEFREQ_P3; |
| voltage_setting = SMU_11_0_ODSETTING_VDDGFXCURVEVOLTAGE_P3; |
| freq_ptr = &od_table->GfxclkFreq3; |
| voltage_ptr = &od_table->GfxclkVolt3; |
| break; |
| default: |
| dev_info(smu->adev->dev, "Invalid VDDC_CURVE index: %ld\n", input[0]); |
| dev_info(smu->adev->dev, "Supported indices: [0, 1, 2]\n"); |
| return -EINVAL; |
| } |
| ret = navi10_od_setting_check_range(smu, od_settings, freq_setting, input[1]); |
| if (ret) |
| return ret; |
| // Allow setting zero to disable the OverDrive VDDC curve |
| if (input[2] != 0) { |
| ret = navi10_od_setting_check_range(smu, od_settings, voltage_setting, input[2]); |
| if (ret) |
| return ret; |
| *freq_ptr = input[1]; |
| *voltage_ptr = ((uint16_t)input[2]) * NAVI10_VOLTAGE_SCALE; |
| dev_dbg(smu->adev->dev, "OD: set curve %ld: (%d, %d)\n", input[0], *freq_ptr, *voltage_ptr); |
| } else { |
| // If setting 0, disable all voltage curve settings |
| od_table->GfxclkVolt1 = 0; |
| od_table->GfxclkVolt2 = 0; |
| od_table->GfxclkVolt3 = 0; |
| } |
| navi10_dump_od_table(smu, od_table); |
| break; |
| default: |
| return -ENOSYS; |
| } |
| return ret; |
| } |
| |
| static int navi10_run_btc(struct smu_context *smu) |
| { |
| int ret = 0; |
| |
| ret = smu_cmn_send_smc_msg(smu, SMU_MSG_RunBtc, NULL); |
| if (ret) |
| dev_err(smu->adev->dev, "RunBtc failed!\n"); |
| |
| return ret; |
| } |
| |
| static bool navi10_need_umc_cdr_workaround(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| |
| if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) |
| return false; |
| |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 0) || |
| amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 5)) |
| return true; |
| |
| return false; |
| } |
| |
| static int navi10_umc_hybrid_cdr_workaround(struct smu_context *smu) |
| { |
| uint32_t uclk_count, uclk_min, uclk_max; |
| int ret = 0; |
| |
| /* This workaround can be applied only with uclk dpm enabled */ |
| if (!smu_cmn_feature_is_enabled(smu, SMU_FEATURE_DPM_UCLK_BIT)) |
| return 0; |
| |
| ret = smu_v11_0_get_dpm_level_count(smu, SMU_UCLK, &uclk_count); |
| if (ret) |
| return ret; |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, SMU_UCLK, (uint16_t)(uclk_count - 1), &uclk_max); |
| if (ret) |
| return ret; |
| |
| /* |
| * The NAVI10_UMC_HYBRID_CDR_WORKAROUND_UCLK_THRESHOLD is 750Mhz. |
| * This workaround is needed only when the max uclk frequency |
| * not greater than that. |
| */ |
| if (uclk_max > 0x2EE) |
| return 0; |
| |
| ret = smu_v11_0_get_dpm_freq_by_index(smu, SMU_UCLK, (uint16_t)0, &uclk_min); |
| if (ret) |
| return ret; |
| |
| /* Force UCLK out of the highest DPM */ |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, 0, uclk_min); |
| if (ret) |
| return ret; |
| |
| /* Revert the UCLK Hardmax */ |
| ret = smu_v11_0_set_hard_freq_limited_range(smu, SMU_UCLK, 0, uclk_max); |
| if (ret) |
| return ret; |
| |
| /* |
| * In this case, SMU already disabled dummy pstate during enablement |
| * of UCLK DPM, we have to re-enabled it. |
| */ |
| return smu_cmn_send_smc_msg(smu, SMU_MSG_DAL_ENABLE_DUMMY_PSTATE_CHANGE, NULL); |
| } |
| |
| static int navi10_set_dummy_pstates_table_location(struct smu_context *smu) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *dummy_read_table = |
| &smu_table->dummy_read_1_table; |
| char *dummy_table = dummy_read_table->cpu_addr; |
| int ret = 0; |
| uint32_t i; |
| |
| for (i = 0; i < 0x40000; i += 0x1000 * 2) { |
| memcpy(dummy_table, &NoDbiPrbs7[0], 0x1000); |
| dummy_table += 0x1000; |
| memcpy(dummy_table, &DbiPrbs7[0], 0x1000); |
| dummy_table += 0x1000; |
| } |
| |
| amdgpu_asic_flush_hdp(smu->adev, NULL); |
| |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SET_DRIVER_DUMMY_TABLE_DRAM_ADDR_HIGH, |
| upper_32_bits(dummy_read_table->mc_address), |
| NULL); |
| if (ret) |
| return ret; |
| |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SET_DRIVER_DUMMY_TABLE_DRAM_ADDR_LOW, |
| lower_32_bits(dummy_read_table->mc_address), |
| NULL); |
| } |
| |
| static int navi10_run_umc_cdr_workaround(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| uint8_t umc_fw_greater_than_v136 = false; |
| uint8_t umc_fw_disable_cdr = false; |
| uint32_t param; |
| int ret = 0; |
| |
| if (!navi10_need_umc_cdr_workaround(smu)) |
| return 0; |
| |
| /* |
| * The messages below are only supported by Navi10 42.53.0 and later |
| * PMFWs and Navi14 53.29.0 and later PMFWs. |
| * - PPSMC_MSG_SetDriverDummyTableDramAddrHigh |
| * - PPSMC_MSG_SetDriverDummyTableDramAddrLow |
| * - PPSMC_MSG_GetUMCFWWA |
| */ |
| if (((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 0)) && |
| (smu->smc_fw_version >= 0x2a3500)) || |
| ((amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 5)) && |
| (smu->smc_fw_version >= 0x351D00))) { |
| ret = smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_GET_UMC_FW_WA, |
| 0, |
| ¶m); |
| if (ret) |
| return ret; |
| |
| /* First bit indicates if the UMC f/w is above v137 */ |
| umc_fw_greater_than_v136 = param & 0x1; |
| |
| /* Second bit indicates if hybrid-cdr is disabled */ |
| umc_fw_disable_cdr = param & 0x2; |
| |
| /* w/a only allowed if UMC f/w is <= 136 */ |
| if (umc_fw_greater_than_v136) |
| return 0; |
| |
| if (umc_fw_disable_cdr) { |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 0)) |
| return navi10_umc_hybrid_cdr_workaround(smu); |
| } else { |
| return navi10_set_dummy_pstates_table_location(smu); |
| } |
| } else { |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 0)) |
| return navi10_umc_hybrid_cdr_workaround(smu); |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t navi10_get_legacy_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_3 *gpu_metrics = |
| (struct gpu_metrics_v1_3 *)smu_table->gpu_metrics_table; |
| SmuMetrics_legacy_t metrics; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| true); |
| if (ret) |
| return ret; |
| |
| memcpy(&metrics, smu_table->metrics_table, sizeof(SmuMetrics_legacy_t)); |
| |
| smu_cmn_init_soft_gpu_metrics(gpu_metrics, 1, 3); |
| |
| gpu_metrics->temperature_edge = metrics.TemperatureEdge; |
| gpu_metrics->temperature_hotspot = metrics.TemperatureHotspot; |
| gpu_metrics->temperature_mem = metrics.TemperatureMem; |
| gpu_metrics->temperature_vrgfx = metrics.TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = metrics.TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = metrics.TemperatureVrMem0; |
| |
| gpu_metrics->average_gfx_activity = metrics.AverageGfxActivity; |
| gpu_metrics->average_umc_activity = metrics.AverageUclkActivity; |
| |
| gpu_metrics->average_socket_power = metrics.AverageSocketPower; |
| |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequency; |
| gpu_metrics->average_socclk_frequency = metrics.AverageSocclkFrequency; |
| gpu_metrics->average_uclk_frequency = metrics.AverageUclkFrequency; |
| |
| gpu_metrics->current_gfxclk = metrics.CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = metrics.CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = metrics.CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = metrics.CurrClock[PPCLK_VCLK]; |
| gpu_metrics->current_dclk0 = metrics.CurrClock[PPCLK_DCLK]; |
| |
| gpu_metrics->throttle_status = metrics.ThrottlerStatus; |
| gpu_metrics->indep_throttle_status = |
| smu_cmn_get_indep_throttler_status(metrics.ThrottlerStatus, |
| navi1x_throttler_map); |
| |
| gpu_metrics->current_fan_speed = metrics.CurrFanSpeed; |
| |
| gpu_metrics->pcie_link_width = |
| smu_v11_0_get_current_pcie_link_width(smu); |
| gpu_metrics->pcie_link_speed = |
| smu_v11_0_get_current_pcie_link_speed(smu); |
| |
| gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); |
| |
| if (metrics.CurrGfxVoltageOffset) |
| gpu_metrics->voltage_gfx = |
| (155000 - 625 * metrics.CurrGfxVoltageOffset) / 100; |
| if (metrics.CurrMemVidOffset) |
| gpu_metrics->voltage_mem = |
| (155000 - 625 * metrics.CurrMemVidOffset) / 100; |
| if (metrics.CurrSocVoltageOffset) |
| gpu_metrics->voltage_soc = |
| (155000 - 625 * metrics.CurrSocVoltageOffset) / 100; |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_3); |
| } |
| |
| static int navi10_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msg, int num_msgs) |
| { |
| struct amdgpu_smu_i2c_bus *smu_i2c = i2c_get_adapdata(i2c_adap); |
| struct amdgpu_device *adev = smu_i2c->adev; |
| struct smu_context *smu = adev->powerplay.pp_handle; |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct smu_table *table = &smu_table->driver_table; |
| SwI2cRequest_t *req, *res = (SwI2cRequest_t *)table->cpu_addr; |
| int i, j, r, c; |
| u16 dir; |
| |
| if (!adev->pm.dpm_enabled) |
| return -EBUSY; |
| |
| req = kzalloc(sizeof(*req), GFP_KERNEL); |
| if (!req) |
| return -ENOMEM; |
| |
| req->I2CcontrollerPort = smu_i2c->port; |
| req->I2CSpeed = I2C_SPEED_FAST_400K; |
| req->SlaveAddress = msg[0].addr << 1; /* wants an 8-bit address */ |
| dir = msg[0].flags & I2C_M_RD; |
| |
| for (c = i = 0; i < num_msgs; i++) { |
| for (j = 0; j < msg[i].len; j++, c++) { |
| SwI2cCmd_t *cmd = &req->SwI2cCmds[c]; |
| |
| if (!(msg[i].flags & I2C_M_RD)) { |
| /* write */ |
| cmd->Cmd = I2C_CMD_WRITE; |
| cmd->RegisterAddr = msg[i].buf[j]; |
| } |
| |
| if ((dir ^ msg[i].flags) & I2C_M_RD) { |
| /* The direction changes. |
| */ |
| dir = msg[i].flags & I2C_M_RD; |
| cmd->CmdConfig |= CMDCONFIG_RESTART_MASK; |
| } |
| |
| req->NumCmds++; |
| |
| /* |
| * Insert STOP if we are at the last byte of either last |
| * message for the transaction or the client explicitly |
| * requires a STOP at this particular message. |
| */ |
| if ((j == msg[i].len - 1) && |
| ((i == num_msgs - 1) || (msg[i].flags & I2C_M_STOP))) { |
| cmd->CmdConfig &= ~CMDCONFIG_RESTART_MASK; |
| cmd->CmdConfig |= CMDCONFIG_STOP_MASK; |
| } |
| } |
| } |
| mutex_lock(&adev->pm.mutex); |
| r = smu_cmn_update_table(smu, SMU_TABLE_I2C_COMMANDS, 0, req, true); |
| if (r) |
| goto fail; |
| |
| for (c = i = 0; i < num_msgs; i++) { |
| if (!(msg[i].flags & I2C_M_RD)) { |
| c += msg[i].len; |
| continue; |
| } |
| for (j = 0; j < msg[i].len; j++, c++) { |
| SwI2cCmd_t *cmd = &res->SwI2cCmds[c]; |
| |
| msg[i].buf[j] = cmd->Data; |
| } |
| } |
| r = num_msgs; |
| fail: |
| mutex_unlock(&adev->pm.mutex); |
| kfree(req); |
| return r; |
| } |
| |
| static u32 navi10_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| |
| static const struct i2c_algorithm navi10_i2c_algo = { |
| .master_xfer = navi10_i2c_xfer, |
| .functionality = navi10_i2c_func, |
| }; |
| |
| static const struct i2c_adapter_quirks navi10_i2c_control_quirks = { |
| .flags = I2C_AQ_COMB | I2C_AQ_COMB_SAME_ADDR | I2C_AQ_NO_ZERO_LEN, |
| .max_read_len = MAX_SW_I2C_COMMANDS, |
| .max_write_len = MAX_SW_I2C_COMMANDS, |
| .max_comb_1st_msg_len = 2, |
| .max_comb_2nd_msg_len = MAX_SW_I2C_COMMANDS - 2, |
| }; |
| |
| static int navi10_i2c_control_init(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int res, i; |
| |
| for (i = 0; i < MAX_SMU_I2C_BUSES; i++) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| smu_i2c->adev = adev; |
| smu_i2c->port = i; |
| mutex_init(&smu_i2c->mutex); |
| control->owner = THIS_MODULE; |
| control->class = I2C_CLASS_HWMON; |
| control->dev.parent = &adev->pdev->dev; |
| control->algo = &navi10_i2c_algo; |
| snprintf(control->name, sizeof(control->name), "AMDGPU SMU %d", i); |
| control->quirks = &navi10_i2c_control_quirks; |
| i2c_set_adapdata(control, smu_i2c); |
| |
| res = i2c_add_adapter(control); |
| if (res) { |
| DRM_ERROR("Failed to register hw i2c, err: %d\n", res); |
| goto Out_err; |
| } |
| } |
| |
| adev->pm.ras_eeprom_i2c_bus = &adev->pm.smu_i2c[0].adapter; |
| adev->pm.fru_eeprom_i2c_bus = &adev->pm.smu_i2c[1].adapter; |
| |
| return 0; |
| Out_err: |
| for ( ; i >= 0; i--) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| i2c_del_adapter(control); |
| } |
| return res; |
| } |
| |
| static void navi10_i2c_control_fini(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int i; |
| |
| for (i = 0; i < MAX_SMU_I2C_BUSES; i++) { |
| struct amdgpu_smu_i2c_bus *smu_i2c = &adev->pm.smu_i2c[i]; |
| struct i2c_adapter *control = &smu_i2c->adapter; |
| |
| i2c_del_adapter(control); |
| } |
| adev->pm.ras_eeprom_i2c_bus = NULL; |
| adev->pm.fru_eeprom_i2c_bus = NULL; |
| } |
| |
| static ssize_t navi10_get_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_3 *gpu_metrics = |
| (struct gpu_metrics_v1_3 *)smu_table->gpu_metrics_table; |
| SmuMetrics_t metrics; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| true); |
| if (ret) |
| return ret; |
| |
| memcpy(&metrics, smu_table->metrics_table, sizeof(SmuMetrics_t)); |
| |
| smu_cmn_init_soft_gpu_metrics(gpu_metrics, 1, 3); |
| |
| gpu_metrics->temperature_edge = metrics.TemperatureEdge; |
| gpu_metrics->temperature_hotspot = metrics.TemperatureHotspot; |
| gpu_metrics->temperature_mem = metrics.TemperatureMem; |
| gpu_metrics->temperature_vrgfx = metrics.TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = metrics.TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = metrics.TemperatureVrMem0; |
| |
| gpu_metrics->average_gfx_activity = metrics.AverageGfxActivity; |
| gpu_metrics->average_umc_activity = metrics.AverageUclkActivity; |
| |
| gpu_metrics->average_socket_power = metrics.AverageSocketPower; |
| |
| if (metrics.AverageGfxActivity > SMU_11_0_GFX_BUSY_THRESHOLD) |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequencyPreDs; |
| else |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequencyPostDs; |
| |
| gpu_metrics->average_socclk_frequency = metrics.AverageSocclkFrequency; |
| gpu_metrics->average_uclk_frequency = metrics.AverageUclkFrequencyPostDs; |
| |
| gpu_metrics->current_gfxclk = metrics.CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = metrics.CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = metrics.CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = metrics.CurrClock[PPCLK_VCLK]; |
| gpu_metrics->current_dclk0 = metrics.CurrClock[PPCLK_DCLK]; |
| |
| gpu_metrics->throttle_status = metrics.ThrottlerStatus; |
| gpu_metrics->indep_throttle_status = |
| smu_cmn_get_indep_throttler_status(metrics.ThrottlerStatus, |
| navi1x_throttler_map); |
| |
| gpu_metrics->current_fan_speed = metrics.CurrFanSpeed; |
| |
| gpu_metrics->pcie_link_width = metrics.PcieWidth; |
| gpu_metrics->pcie_link_speed = link_speed[metrics.PcieRate]; |
| |
| gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); |
| |
| if (metrics.CurrGfxVoltageOffset) |
| gpu_metrics->voltage_gfx = |
| (155000 - 625 * metrics.CurrGfxVoltageOffset) / 100; |
| if (metrics.CurrMemVidOffset) |
| gpu_metrics->voltage_mem = |
| (155000 - 625 * metrics.CurrMemVidOffset) / 100; |
| if (metrics.CurrSocVoltageOffset) |
| gpu_metrics->voltage_soc = |
| (155000 - 625 * metrics.CurrSocVoltageOffset) / 100; |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_3); |
| } |
| |
| static ssize_t navi12_get_legacy_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_3 *gpu_metrics = |
| (struct gpu_metrics_v1_3 *)smu_table->gpu_metrics_table; |
| SmuMetrics_NV12_legacy_t metrics; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| true); |
| if (ret) |
| return ret; |
| |
| memcpy(&metrics, smu_table->metrics_table, sizeof(SmuMetrics_NV12_legacy_t)); |
| |
| smu_cmn_init_soft_gpu_metrics(gpu_metrics, 1, 3); |
| |
| gpu_metrics->temperature_edge = metrics.TemperatureEdge; |
| gpu_metrics->temperature_hotspot = metrics.TemperatureHotspot; |
| gpu_metrics->temperature_mem = metrics.TemperatureMem; |
| gpu_metrics->temperature_vrgfx = metrics.TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = metrics.TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = metrics.TemperatureVrMem0; |
| |
| gpu_metrics->average_gfx_activity = metrics.AverageGfxActivity; |
| gpu_metrics->average_umc_activity = metrics.AverageUclkActivity; |
| |
| gpu_metrics->average_socket_power = metrics.AverageSocketPower; |
| |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequency; |
| gpu_metrics->average_socclk_frequency = metrics.AverageSocclkFrequency; |
| gpu_metrics->average_uclk_frequency = metrics.AverageUclkFrequency; |
| |
| gpu_metrics->energy_accumulator = metrics.EnergyAccumulator; |
| gpu_metrics->average_vclk0_frequency = metrics.AverageVclkFrequency; |
| gpu_metrics->average_dclk0_frequency = metrics.AverageDclkFrequency; |
| gpu_metrics->average_mm_activity = metrics.VcnActivityPercentage; |
| |
| gpu_metrics->current_gfxclk = metrics.CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = metrics.CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = metrics.CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = metrics.CurrClock[PPCLK_VCLK]; |
| gpu_metrics->current_dclk0 = metrics.CurrClock[PPCLK_DCLK]; |
| |
| gpu_metrics->throttle_status = metrics.ThrottlerStatus; |
| gpu_metrics->indep_throttle_status = |
| smu_cmn_get_indep_throttler_status(metrics.ThrottlerStatus, |
| navi1x_throttler_map); |
| |
| gpu_metrics->current_fan_speed = metrics.CurrFanSpeed; |
| |
| gpu_metrics->pcie_link_width = |
| smu_v11_0_get_current_pcie_link_width(smu); |
| gpu_metrics->pcie_link_speed = |
| smu_v11_0_get_current_pcie_link_speed(smu); |
| |
| gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); |
| |
| if (metrics.CurrGfxVoltageOffset) |
| gpu_metrics->voltage_gfx = |
| (155000 - 625 * metrics.CurrGfxVoltageOffset) / 100; |
| if (metrics.CurrMemVidOffset) |
| gpu_metrics->voltage_mem = |
| (155000 - 625 * metrics.CurrMemVidOffset) / 100; |
| if (metrics.CurrSocVoltageOffset) |
| gpu_metrics->voltage_soc = |
| (155000 - 625 * metrics.CurrSocVoltageOffset) / 100; |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_3); |
| } |
| |
| static ssize_t navi12_get_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct smu_table_context *smu_table = &smu->smu_table; |
| struct gpu_metrics_v1_3 *gpu_metrics = |
| (struct gpu_metrics_v1_3 *)smu_table->gpu_metrics_table; |
| SmuMetrics_NV12_t metrics; |
| int ret = 0; |
| |
| ret = smu_cmn_get_metrics_table(smu, |
| NULL, |
| true); |
| if (ret) |
| return ret; |
| |
| memcpy(&metrics, smu_table->metrics_table, sizeof(SmuMetrics_NV12_t)); |
| |
| smu_cmn_init_soft_gpu_metrics(gpu_metrics, 1, 3); |
| |
| gpu_metrics->temperature_edge = metrics.TemperatureEdge; |
| gpu_metrics->temperature_hotspot = metrics.TemperatureHotspot; |
| gpu_metrics->temperature_mem = metrics.TemperatureMem; |
| gpu_metrics->temperature_vrgfx = metrics.TemperatureVrGfx; |
| gpu_metrics->temperature_vrsoc = metrics.TemperatureVrSoc; |
| gpu_metrics->temperature_vrmem = metrics.TemperatureVrMem0; |
| |
| gpu_metrics->average_gfx_activity = metrics.AverageGfxActivity; |
| gpu_metrics->average_umc_activity = metrics.AverageUclkActivity; |
| |
| gpu_metrics->average_socket_power = metrics.AverageSocketPower; |
| |
| if (metrics.AverageGfxActivity > SMU_11_0_GFX_BUSY_THRESHOLD) |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequencyPreDs; |
| else |
| gpu_metrics->average_gfxclk_frequency = metrics.AverageGfxclkFrequencyPostDs; |
| |
| gpu_metrics->average_socclk_frequency = metrics.AverageSocclkFrequency; |
| gpu_metrics->average_uclk_frequency = metrics.AverageUclkFrequencyPostDs; |
| |
| gpu_metrics->energy_accumulator = metrics.EnergyAccumulator; |
| gpu_metrics->average_vclk0_frequency = metrics.AverageVclkFrequency; |
| gpu_metrics->average_dclk0_frequency = metrics.AverageDclkFrequency; |
| gpu_metrics->average_mm_activity = metrics.VcnActivityPercentage; |
| |
| gpu_metrics->current_gfxclk = metrics.CurrClock[PPCLK_GFXCLK]; |
| gpu_metrics->current_socclk = metrics.CurrClock[PPCLK_SOCCLK]; |
| gpu_metrics->current_uclk = metrics.CurrClock[PPCLK_UCLK]; |
| gpu_metrics->current_vclk0 = metrics.CurrClock[PPCLK_VCLK]; |
| gpu_metrics->current_dclk0 = metrics.CurrClock[PPCLK_DCLK]; |
| |
| gpu_metrics->throttle_status = metrics.ThrottlerStatus; |
| gpu_metrics->indep_throttle_status = |
| smu_cmn_get_indep_throttler_status(metrics.ThrottlerStatus, |
| navi1x_throttler_map); |
| |
| gpu_metrics->current_fan_speed = metrics.CurrFanSpeed; |
| |
| gpu_metrics->pcie_link_width = metrics.PcieWidth; |
| gpu_metrics->pcie_link_speed = link_speed[metrics.PcieRate]; |
| |
| gpu_metrics->system_clock_counter = ktime_get_boottime_ns(); |
| |
| if (metrics.CurrGfxVoltageOffset) |
| gpu_metrics->voltage_gfx = |
| (155000 - 625 * metrics.CurrGfxVoltageOffset) / 100; |
| if (metrics.CurrMemVidOffset) |
| gpu_metrics->voltage_mem = |
| (155000 - 625 * metrics.CurrMemVidOffset) / 100; |
| if (metrics.CurrSocVoltageOffset) |
| gpu_metrics->voltage_soc = |
| (155000 - 625 * metrics.CurrSocVoltageOffset) / 100; |
| |
| *table = (void *)gpu_metrics; |
| |
| return sizeof(struct gpu_metrics_v1_3); |
| } |
| |
| static ssize_t navi1x_get_gpu_metrics(struct smu_context *smu, |
| void **table) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| switch (amdgpu_ip_version(adev, MP1_HWIP, 0)) { |
| case IP_VERSION(11, 0, 9): |
| if (smu->smc_fw_version > 0x00341C00) |
| ret = navi12_get_gpu_metrics(smu, table); |
| else |
| ret = navi12_get_legacy_gpu_metrics(smu, table); |
| break; |
| case IP_VERSION(11, 0, 0): |
| case IP_VERSION(11, 0, 5): |
| default: |
| if (((amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 5)) && |
| smu->smc_fw_version > 0x00351F00) || |
| ((amdgpu_ip_version(adev, MP1_HWIP, 0) == |
| IP_VERSION(11, 0, 0)) && |
| smu->smc_fw_version > 0x002A3B00)) |
| ret = navi10_get_gpu_metrics(smu, table); |
| else |
| ret = navi10_get_legacy_gpu_metrics(smu, table); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int navi10_enable_mgpu_fan_boost(struct smu_context *smu) |
| { |
| struct smu_table_context *table_context = &smu->smu_table; |
| PPTable_t *smc_pptable = table_context->driver_pptable; |
| struct amdgpu_device *adev = smu->adev; |
| uint32_t param = 0; |
| |
| /* Navi12 does not support this */ |
| if (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(11, 0, 9)) |
| return 0; |
| |
| /* |
| * Skip the MGpuFanBoost setting for those ASICs |
| * which do not support it |
| */ |
| if (!smc_pptable->MGpuFanBoostLimitRpm) |
| return 0; |
| |
| /* Workaround for WS SKU */ |
| if (adev->pdev->device == 0x7312 && |
| adev->pdev->revision == 0) |
| param = 0xD188; |
| |
| return smu_cmn_send_smc_msg_with_param(smu, |
| SMU_MSG_SetMGpuFanBoostLimitRpm, |
| param, |
| NULL); |
| } |
| |
| static int navi10_post_smu_init(struct smu_context *smu) |
| { |
| struct amdgpu_device *adev = smu->adev; |
| int ret = 0; |
| |
| if (amdgpu_sriov_vf(adev)) |
| return 0; |
| |
| ret = navi10_run_umc_cdr_workaround(smu); |
| if (ret) |
| dev_err(adev->dev, "Failed to apply umc cdr workaround!\n"); |
| |
| return ret; |
| } |
| |
| static int navi10_get_default_config_table_settings(struct smu_context *smu, |
| struct config_table_setting *table) |
| { |
| if (!table) |
| return -EINVAL; |
| |
| table->gfxclk_average_tau = 10; |
| table->socclk_average_tau = 10; |
| table->uclk_average_tau = 10; |
| table->gfx_activity_average_tau = 10; |
| table->mem_activity_average_tau = 10; |
| table->socket_power_average_tau = 10; |
| |
| return 0; |
| } |
| |
| static int navi10_set_config_table(struct smu_context *smu, |
| struct config_table_setting *table) |
| { |
| DriverSmuConfig_t driver_smu_config_table; |
| |
| if (!table) |
| return -EINVAL; |
| |
| memset(&driver_smu_config_table, |
| 0, |
| sizeof(driver_smu_config_table)); |
| |
| driver_smu_config_table.GfxclkAverageLpfTau = |
| table->gfxclk_average_tau; |
| driver_smu_config_table.SocclkAverageLpfTau = |
| table->socclk_average_tau; |
| driver_smu_config_table.UclkAverageLpfTau = |
| table->uclk_average_tau; |
| driver_smu_config_table.GfxActivityLpfTau = |
| table->gfx_activity_average_tau; |
| driver_smu_config_table.UclkActivityLpfTau = |
| table->mem_activity_average_tau; |
| driver_smu_config_table.SocketPowerLpfTau = |
| table->socket_power_average_tau; |
| |
| return smu_cmn_update_table(smu, |
| SMU_TABLE_DRIVER_SMU_CONFIG, |
| 0, |
| (void *)&driver_smu_config_table, |
| true); |
| } |
| |
| static const struct pptable_funcs navi10_ppt_funcs = { |
| .get_allowed_feature_mask = navi10_get_allowed_feature_mask, |
| .set_default_dpm_table = navi10_set_default_dpm_table, |
| .dpm_set_vcn_enable = navi10_dpm_set_vcn_enable, |
| .dpm_set_jpeg_enable = navi10_dpm_set_jpeg_enable, |
| .i2c_init = navi10_i2c_control_init, |
| .i2c_fini = navi10_i2c_control_fini, |
| .print_clk_levels = navi10_print_clk_levels, |
| .emit_clk_levels = navi10_emit_clk_levels, |
| .force_clk_levels = navi10_force_clk_levels, |
| .populate_umd_state_clk = navi10_populate_umd_state_clk, |
| .get_clock_by_type_with_latency = navi10_get_clock_by_type_with_latency, |
| .pre_display_config_changed = navi10_pre_display_config_changed, |
| .display_config_changed = navi10_display_config_changed, |
| .notify_smc_display_config = navi10_notify_smc_display_config, |
| .is_dpm_running = navi10_is_dpm_running, |
| .get_fan_speed_pwm = smu_v11_0_get_fan_speed_pwm, |
| .get_fan_speed_rpm = navi10_get_fan_speed_rpm, |
| .get_power_profile_mode = navi10_get_power_profile_mode, |
| .set_power_profile_mode = navi10_set_power_profile_mode, |
| .set_watermarks_table = navi10_set_watermarks_table, |
| .read_sensor = navi10_read_sensor, |
| .get_uclk_dpm_states = navi10_get_uclk_dpm_states, |
| .set_performance_level = smu_v11_0_set_performance_level, |
| .get_thermal_temperature_range = navi10_get_thermal_temperature_range, |
| .display_disable_memory_clock_switch = navi10_display_disable_memory_clock_switch, |
| .get_power_limit = navi10_get_power_limit, |
| .update_pcie_parameters = navi10_update_pcie_parameters, |
| .init_microcode = smu_v11_0_init_microcode, |
| .load_microcode = smu_v11_0_load_microcode, |
| .fini_microcode = smu_v11_0_fini_microcode, |
| .init_smc_tables = navi10_init_smc_tables, |
| .fini_smc_tables = smu_v11_0_fini_smc_tables, |
| .init_power = smu_v11_0_init_power, |
| .fini_power = smu_v11_0_fini_power, |
| .check_fw_status = smu_v11_0_check_fw_status, |
| .setup_pptable = navi10_setup_pptable, |
| .get_vbios_bootup_values = smu_v11_0_get_vbios_bootup_values, |
| .check_fw_version = smu_v11_0_check_fw_version, |
| .write_pptable = smu_cmn_write_pptable, |
| .set_driver_table_location = smu_v11_0_set_driver_table_location, |
| .set_tool_table_location = smu_v11_0_set_tool_table_location, |
| .notify_memory_pool_location = smu_v11_0_notify_memory_pool_location, |
| .system_features_control = smu_v11_0_system_features_control, |
| .send_smc_msg_with_param = smu_cmn_send_smc_msg_with_param, |
| .send_smc_msg = smu_cmn_send_smc_msg, |
| .init_display_count = smu_v11_0_init_display_count, |
| .set_allowed_mask = smu_v11_0_set_allowed_mask, |
| .get_enabled_mask = smu_cmn_get_enabled_mask, |
| .feature_is_enabled = smu_cmn_feature_is_enabled, |
| .disable_all_features_with_exception = smu_cmn_disable_all_features_with_exception, |
| .notify_display_change = smu_v11_0_notify_display_change, |
| .set_power_limit = smu_v11_0_set_power_limit, |
| .init_max_sustainable_clocks = smu_v11_0_init_max_sustainable_clocks, |
| .enable_thermal_alert = smu_v11_0_enable_thermal_alert, |
| .disable_thermal_alert = smu_v11_0_disable_thermal_alert, |
| .set_min_dcef_deep_sleep = smu_v11_0_set_min_deep_sleep_dcefclk, |
| .display_clock_voltage_request = smu_v11_0_display_clock_voltage_request, |
| .get_fan_control_mode = smu_v11_0_get_fan_control_mode, |
| .set_fan_control_mode = smu_v11_0_set_fan_control_mode, |
| .set_fan_speed_pwm = smu_v11_0_set_fan_speed_pwm, |
| .set_fan_speed_rpm = smu_v11_0_set_fan_speed_rpm, |
| .set_xgmi_pstate = smu_v11_0_set_xgmi_pstate, |
| .gfx_off_control = smu_v11_0_gfx_off_control, |
| .register_irq_handler = smu_v11_0_register_irq_handler, |
| .set_azalia_d3_pme = smu_v11_0_set_azalia_d3_pme, |
| .get_max_sustainable_clocks_by_dc = smu_v11_0_get_max_sustainable_clocks_by_dc, |
| .get_bamaco_support = smu_v11_0_get_bamaco_support, |
| .baco_enter = navi10_baco_enter, |
| .baco_exit = navi10_baco_exit, |
| .get_dpm_ultimate_freq = smu_v11_0_get_dpm_ultimate_freq, |
| .set_soft_freq_limited_range = smu_v11_0_set_soft_freq_limited_range, |
| .set_default_od_settings = navi10_set_default_od_settings, |
| .od_edit_dpm_table = navi10_od_edit_dpm_table, |
| .restore_user_od_settings = smu_v11_0_restore_user_od_settings, |
| .run_btc = navi10_run_btc, |
| .set_power_source = smu_v11_0_set_power_source, |
| .get_pp_feature_mask = smu_cmn_get_pp_feature_mask, |
| .set_pp_feature_mask = smu_cmn_set_pp_feature_mask, |
| .get_gpu_metrics = navi1x_get_gpu_metrics, |
| .enable_mgpu_fan_boost = navi10_enable_mgpu_fan_boost, |
| .gfx_ulv_control = smu_v11_0_gfx_ulv_control, |
| .deep_sleep_control = smu_v11_0_deep_sleep_control, |
| .get_fan_parameters = navi10_get_fan_parameters, |
| .post_init = navi10_post_smu_init, |
| .interrupt_work = smu_v11_0_interrupt_work, |
| .set_mp1_state = smu_cmn_set_mp1_state, |
| .get_default_config_table_settings = navi10_get_default_config_table_settings, |
| .set_config_table = navi10_set_config_table, |
| }; |
| |
| void navi10_set_ppt_funcs(struct smu_context *smu) |
| { |
| smu->ppt_funcs = &navi10_ppt_funcs; |
| smu->message_map = navi10_message_map; |
| smu->clock_map = navi10_clk_map; |
| smu->feature_map = navi10_feature_mask_map; |
| smu->table_map = navi10_table_map; |
| smu->pwr_src_map = navi10_pwr_src_map; |
| smu->workload_map = navi10_workload_map; |
| smu_v11_0_set_smu_mailbox_registers(smu); |
| } |