| /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*- |
| */ |
| /* |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/oom.h> |
| #include <linux/pci.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/string_helpers.h> |
| #include <linux/vga_switcheroo.h> |
| #include <linux/vt.h> |
| |
| #include <drm/drm_aperture.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_ioctl.h> |
| #include <drm/drm_managed.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "display/intel_acpi.h" |
| #include "display/intel_bw.h" |
| #include "display/intel_cdclk.h" |
| #include "display/intel_display_driver.h" |
| #include "display/intel_display.h" |
| #include "display/intel_dmc.h" |
| #include "display/intel_dp.h" |
| #include "display/intel_dpt.h" |
| #include "display/intel_encoder.h" |
| #include "display/intel_fbdev.h" |
| #include "display/intel_hotplug.h" |
| #include "display/intel_overlay.h" |
| #include "display/intel_pch_refclk.h" |
| #include "display/intel_pps.h" |
| #include "display/intel_sprite.h" |
| #include "display/skl_watermark.h" |
| |
| #include "gem/i915_gem_context.h" |
| #include "gem/i915_gem_create.h" |
| #include "gem/i915_gem_dmabuf.h" |
| #include "gem/i915_gem_ioctls.h" |
| #include "gem/i915_gem_mman.h" |
| #include "gem/i915_gem_pm.h" |
| #include "gt/intel_gt.h" |
| #include "gt/intel_gt_pm.h" |
| #include "gt/intel_gt_print.h" |
| #include "gt/intel_rc6.h" |
| |
| #include "pxp/intel_pxp.h" |
| #include "pxp/intel_pxp_debugfs.h" |
| #include "pxp/intel_pxp_pm.h" |
| |
| #include "soc/intel_dram.h" |
| #include "soc/intel_gmch.h" |
| |
| #include "i915_debugfs.h" |
| #include "i915_driver.h" |
| #include "i915_drm_client.h" |
| #include "i915_drv.h" |
| #include "i915_file_private.h" |
| #include "i915_getparam.h" |
| #include "i915_hwmon.h" |
| #include "i915_ioc32.h" |
| #include "i915_ioctl.h" |
| #include "i915_irq.h" |
| #include "i915_memcpy.h" |
| #include "i915_perf.h" |
| #include "i915_query.h" |
| #include "i915_suspend.h" |
| #include "i915_switcheroo.h" |
| #include "i915_sysfs.h" |
| #include "i915_utils.h" |
| #include "i915_vgpu.h" |
| #include "intel_clock_gating.h" |
| #include "intel_gvt.h" |
| #include "intel_memory_region.h" |
| #include "intel_pci_config.h" |
| #include "intel_pcode.h" |
| #include "intel_region_ttm.h" |
| #include "vlv_suspend.h" |
| |
| static const struct drm_driver i915_drm_driver; |
| |
| static int i915_workqueues_init(struct drm_i915_private *dev_priv) |
| { |
| /* |
| * The i915 workqueue is primarily used for batched retirement of |
| * requests (and thus managing bo) once the task has been completed |
| * by the GPU. i915_retire_requests() is called directly when we |
| * need high-priority retirement, such as waiting for an explicit |
| * bo. |
| * |
| * It is also used for periodic low-priority events, such as |
| * idle-timers and recording error state. |
| * |
| * All tasks on the workqueue are expected to acquire the dev mutex |
| * so there is no point in running more than one instance of the |
| * workqueue at any time. Use an ordered one. |
| */ |
| dev_priv->wq = alloc_ordered_workqueue("i915", 0); |
| if (dev_priv->wq == NULL) |
| goto out_err; |
| |
| dev_priv->display.hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0); |
| if (dev_priv->display.hotplug.dp_wq == NULL) |
| goto out_free_wq; |
| |
| /* |
| * The unordered i915 workqueue should be used for all work |
| * scheduling that do not require running in order, which used |
| * to be scheduled on the system_wq before moving to a driver |
| * instance due deprecation of flush_scheduled_work(). |
| */ |
| dev_priv->unordered_wq = alloc_workqueue("i915-unordered", 0, 0); |
| if (dev_priv->unordered_wq == NULL) |
| goto out_free_dp_wq; |
| |
| return 0; |
| |
| out_free_dp_wq: |
| destroy_workqueue(dev_priv->display.hotplug.dp_wq); |
| out_free_wq: |
| destroy_workqueue(dev_priv->wq); |
| out_err: |
| drm_err(&dev_priv->drm, "Failed to allocate workqueues.\n"); |
| |
| return -ENOMEM; |
| } |
| |
| static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv) |
| { |
| destroy_workqueue(dev_priv->unordered_wq); |
| destroy_workqueue(dev_priv->display.hotplug.dp_wq); |
| destroy_workqueue(dev_priv->wq); |
| } |
| |
| /* |
| * We don't keep the workarounds for pre-production hardware, so we expect our |
| * driver to fail on these machines in one way or another. A little warning on |
| * dmesg may help both the user and the bug triagers. |
| * |
| * Our policy for removing pre-production workarounds is to keep the |
| * current gen workarounds as a guide to the bring-up of the next gen |
| * (workarounds have a habit of persisting!). Anything older than that |
| * should be removed along with the complications they introduce. |
| */ |
| static void intel_detect_preproduction_hw(struct drm_i915_private *dev_priv) |
| { |
| bool pre = false; |
| |
| pre |= IS_HASWELL_EARLY_SDV(dev_priv); |
| pre |= IS_SKYLAKE(dev_priv) && INTEL_REVID(dev_priv) < 0x6; |
| pre |= IS_BROXTON(dev_priv) && INTEL_REVID(dev_priv) < 0xA; |
| pre |= IS_KABYLAKE(dev_priv) && INTEL_REVID(dev_priv) < 0x1; |
| pre |= IS_GEMINILAKE(dev_priv) && INTEL_REVID(dev_priv) < 0x3; |
| pre |= IS_ICELAKE(dev_priv) && INTEL_REVID(dev_priv) < 0x7; |
| pre |= IS_TIGERLAKE(dev_priv) && INTEL_REVID(dev_priv) < 0x1; |
| pre |= IS_DG1(dev_priv) && INTEL_REVID(dev_priv) < 0x1; |
| pre |= IS_DG2_G10(dev_priv) && INTEL_REVID(dev_priv) < 0x8; |
| pre |= IS_DG2_G11(dev_priv) && INTEL_REVID(dev_priv) < 0x5; |
| pre |= IS_DG2_G12(dev_priv) && INTEL_REVID(dev_priv) < 0x1; |
| |
| if (pre) { |
| drm_err(&dev_priv->drm, "This is a pre-production stepping. " |
| "It may not be fully functional.\n"); |
| add_taint(TAINT_MACHINE_CHECK, LOCKDEP_STILL_OK); |
| } |
| } |
| |
| static void sanitize_gpu(struct drm_i915_private *i915) |
| { |
| if (!INTEL_INFO(i915)->gpu_reset_clobbers_display) { |
| struct intel_gt *gt; |
| unsigned int i; |
| |
| for_each_gt(gt, i915, i) |
| intel_gt_reset_all_engines(gt); |
| } |
| } |
| |
| /** |
| * i915_driver_early_probe - setup state not requiring device access |
| * @dev_priv: device private |
| * |
| * Initialize everything that is a "SW-only" state, that is state not |
| * requiring accessing the device or exposing the driver via kernel internal |
| * or userspace interfaces. Example steps belonging here: lock initialization, |
| * system memory allocation, setting up device specific attributes and |
| * function hooks not requiring accessing the device. |
| */ |
| static int i915_driver_early_probe(struct drm_i915_private *dev_priv) |
| { |
| int ret = 0; |
| |
| if (i915_inject_probe_failure(dev_priv)) |
| return -ENODEV; |
| |
| intel_device_info_runtime_init_early(dev_priv); |
| |
| intel_step_init(dev_priv); |
| |
| intel_uncore_mmio_debug_init_early(dev_priv); |
| |
| spin_lock_init(&dev_priv->irq_lock); |
| spin_lock_init(&dev_priv->gpu_error.lock); |
| |
| mutex_init(&dev_priv->sb_lock); |
| cpu_latency_qos_add_request(&dev_priv->sb_qos, PM_QOS_DEFAULT_VALUE); |
| |
| i915_memcpy_init_early(dev_priv); |
| intel_runtime_pm_init_early(&dev_priv->runtime_pm); |
| |
| ret = i915_workqueues_init(dev_priv); |
| if (ret < 0) |
| return ret; |
| |
| ret = vlv_suspend_init(dev_priv); |
| if (ret < 0) |
| goto err_workqueues; |
| |
| ret = intel_region_ttm_device_init(dev_priv); |
| if (ret) |
| goto err_ttm; |
| |
| ret = intel_root_gt_init_early(dev_priv); |
| if (ret < 0) |
| goto err_rootgt; |
| |
| i915_gem_init_early(dev_priv); |
| |
| /* This must be called before any calls to HAS_PCH_* */ |
| intel_detect_pch(dev_priv); |
| |
| intel_irq_init(dev_priv); |
| intel_display_driver_early_probe(dev_priv); |
| intel_clock_gating_hooks_init(dev_priv); |
| |
| intel_detect_preproduction_hw(dev_priv); |
| |
| return 0; |
| |
| err_rootgt: |
| intel_region_ttm_device_fini(dev_priv); |
| err_ttm: |
| vlv_suspend_cleanup(dev_priv); |
| err_workqueues: |
| i915_workqueues_cleanup(dev_priv); |
| return ret; |
| } |
| |
| /** |
| * i915_driver_late_release - cleanup the setup done in |
| * i915_driver_early_probe() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_late_release(struct drm_i915_private *dev_priv) |
| { |
| intel_irq_fini(dev_priv); |
| intel_power_domains_cleanup(dev_priv); |
| i915_gem_cleanup_early(dev_priv); |
| intel_gt_driver_late_release_all(dev_priv); |
| intel_region_ttm_device_fini(dev_priv); |
| vlv_suspend_cleanup(dev_priv); |
| i915_workqueues_cleanup(dev_priv); |
| |
| cpu_latency_qos_remove_request(&dev_priv->sb_qos); |
| mutex_destroy(&dev_priv->sb_lock); |
| |
| i915_params_free(&dev_priv->params); |
| } |
| |
| /** |
| * i915_driver_mmio_probe - setup device MMIO |
| * @dev_priv: device private |
| * |
| * Setup minimal device state necessary for MMIO accesses later in the |
| * initialization sequence. The setup here should avoid any other device-wide |
| * side effects or exposing the driver via kernel internal or user space |
| * interfaces. |
| */ |
| static int i915_driver_mmio_probe(struct drm_i915_private *dev_priv) |
| { |
| struct intel_gt *gt; |
| int ret, i; |
| |
| if (i915_inject_probe_failure(dev_priv)) |
| return -ENODEV; |
| |
| ret = intel_gmch_bridge_setup(dev_priv); |
| if (ret < 0) |
| return ret; |
| |
| for_each_gt(gt, dev_priv, i) { |
| ret = intel_uncore_init_mmio(gt->uncore); |
| if (ret) |
| return ret; |
| |
| ret = drmm_add_action_or_reset(&dev_priv->drm, |
| intel_uncore_fini_mmio, |
| gt->uncore); |
| if (ret) |
| return ret; |
| } |
| |
| /* Try to make sure MCHBAR is enabled before poking at it */ |
| intel_gmch_bar_setup(dev_priv); |
| intel_device_info_runtime_init(dev_priv); |
| intel_display_device_info_runtime_init(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) { |
| ret = intel_gt_init_mmio(gt); |
| if (ret) |
| goto err_uncore; |
| } |
| |
| /* As early as possible, scrub existing GPU state before clobbering */ |
| sanitize_gpu(dev_priv); |
| |
| return 0; |
| |
| err_uncore: |
| intel_gmch_bar_teardown(dev_priv); |
| |
| return ret; |
| } |
| |
| /** |
| * i915_driver_mmio_release - cleanup the setup done in i915_driver_mmio_probe() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_mmio_release(struct drm_i915_private *dev_priv) |
| { |
| intel_gmch_bar_teardown(dev_priv); |
| } |
| |
| /** |
| * i915_set_dma_info - set all relevant PCI dma info as configured for the |
| * platform |
| * @i915: valid i915 instance |
| * |
| * Set the dma max segment size, device and coherent masks. The dma mask set |
| * needs to occur before i915_ggtt_probe_hw. |
| * |
| * A couple of platforms have special needs. Address them as well. |
| * |
| */ |
| static int i915_set_dma_info(struct drm_i915_private *i915) |
| { |
| unsigned int mask_size = INTEL_INFO(i915)->dma_mask_size; |
| int ret; |
| |
| GEM_BUG_ON(!mask_size); |
| |
| /* |
| * We don't have a max segment size, so set it to the max so sg's |
| * debugging layer doesn't complain |
| */ |
| dma_set_max_seg_size(i915->drm.dev, UINT_MAX); |
| |
| ret = dma_set_mask(i915->drm.dev, DMA_BIT_MASK(mask_size)); |
| if (ret) |
| goto mask_err; |
| |
| /* overlay on gen2 is broken and can't address above 1G */ |
| if (GRAPHICS_VER(i915) == 2) |
| mask_size = 30; |
| |
| /* |
| * 965GM sometimes incorrectly writes to hardware status page (HWS) |
| * using 32bit addressing, overwriting memory if HWS is located |
| * above 4GB. |
| * |
| * The documentation also mentions an issue with undefined |
| * behaviour if any general state is accessed within a page above 4GB, |
| * which also needs to be handled carefully. |
| */ |
| if (IS_I965G(i915) || IS_I965GM(i915)) |
| mask_size = 32; |
| |
| ret = dma_set_coherent_mask(i915->drm.dev, DMA_BIT_MASK(mask_size)); |
| if (ret) |
| goto mask_err; |
| |
| return 0; |
| |
| mask_err: |
| drm_err(&i915->drm, "Can't set DMA mask/consistent mask (%d)\n", ret); |
| return ret; |
| } |
| |
| static int i915_pcode_init(struct drm_i915_private *i915) |
| { |
| struct intel_gt *gt; |
| int id, ret; |
| |
| for_each_gt(gt, i915, id) { |
| ret = intel_pcode_init(gt->uncore); |
| if (ret) { |
| gt_err(gt, "intel_pcode_init failed %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * i915_driver_hw_probe - setup state requiring device access |
| * @dev_priv: device private |
| * |
| * Setup state that requires accessing the device, but doesn't require |
| * exposing the driver via kernel internal or userspace interfaces. |
| */ |
| static int i915_driver_hw_probe(struct drm_i915_private *dev_priv) |
| { |
| struct intel_display *display = &dev_priv->display; |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| int ret; |
| |
| if (i915_inject_probe_failure(dev_priv)) |
| return -ENODEV; |
| |
| if (HAS_PPGTT(dev_priv)) { |
| if (intel_vgpu_active(dev_priv) && |
| !intel_vgpu_has_full_ppgtt(dev_priv)) { |
| drm_err(&dev_priv->drm, |
| "incompatible vGPU found, support for isolated ppGTT required\n"); |
| return -ENXIO; |
| } |
| } |
| |
| if (HAS_EXECLISTS(dev_priv)) { |
| /* |
| * Older GVT emulation depends upon intercepting CSB mmio, |
| * which we no longer use, preferring to use the HWSP cache |
| * instead. |
| */ |
| if (intel_vgpu_active(dev_priv) && |
| !intel_vgpu_has_hwsp_emulation(dev_priv)) { |
| drm_err(&dev_priv->drm, |
| "old vGPU host found, support for HWSP emulation required\n"); |
| return -ENXIO; |
| } |
| } |
| |
| /* needs to be done before ggtt probe */ |
| intel_dram_edram_detect(dev_priv); |
| |
| ret = i915_set_dma_info(dev_priv); |
| if (ret) |
| return ret; |
| |
| ret = i915_perf_init(dev_priv); |
| if (ret) |
| return ret; |
| |
| ret = i915_ggtt_probe_hw(dev_priv); |
| if (ret) |
| goto err_perf; |
| |
| ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, dev_priv->drm.driver); |
| if (ret) |
| goto err_ggtt; |
| |
| ret = i915_ggtt_init_hw(dev_priv); |
| if (ret) |
| goto err_ggtt; |
| |
| /* |
| * Make sure we probe lmem before we probe stolen-lmem. The BAR size |
| * might be different due to bar resizing. |
| */ |
| ret = intel_gt_tiles_init(dev_priv); |
| if (ret) |
| goto err_ggtt; |
| |
| ret = intel_memory_regions_hw_probe(dev_priv); |
| if (ret) |
| goto err_ggtt; |
| |
| ret = i915_ggtt_enable_hw(dev_priv); |
| if (ret) { |
| drm_err(&dev_priv->drm, "failed to enable GGTT\n"); |
| goto err_mem_regions; |
| } |
| |
| pci_set_master(pdev); |
| |
| /* On the 945G/GM, the chipset reports the MSI capability on the |
| * integrated graphics even though the support isn't actually there |
| * according to the published specs. It doesn't appear to function |
| * correctly in testing on 945G. |
| * This may be a side effect of MSI having been made available for PEG |
| * and the registers being closely associated. |
| * |
| * According to chipset errata, on the 965GM, MSI interrupts may |
| * be lost or delayed, and was defeatured. MSI interrupts seem to |
| * get lost on g4x as well, and interrupt delivery seems to stay |
| * properly dead afterwards. So we'll just disable them for all |
| * pre-gen5 chipsets. |
| * |
| * dp aux and gmbus irq on gen4 seems to be able to generate legacy |
| * interrupts even when in MSI mode. This results in spurious |
| * interrupt warnings if the legacy irq no. is shared with another |
| * device. The kernel then disables that interrupt source and so |
| * prevents the other device from working properly. |
| */ |
| if (GRAPHICS_VER(dev_priv) >= 5) { |
| if (pci_enable_msi(pdev) < 0) |
| drm_dbg(&dev_priv->drm, "can't enable MSI"); |
| } |
| |
| ret = intel_gvt_init(dev_priv); |
| if (ret) |
| goto err_msi; |
| |
| intel_opregion_setup(display); |
| |
| ret = i915_pcode_init(dev_priv); |
| if (ret) |
| goto err_opregion; |
| |
| /* |
| * Fill the dram structure to get the system dram info. This will be |
| * used for memory latency calculation. |
| */ |
| intel_dram_detect(dev_priv); |
| |
| intel_bw_init_hw(dev_priv); |
| |
| return 0; |
| |
| err_opregion: |
| intel_opregion_cleanup(display); |
| err_msi: |
| if (pdev->msi_enabled) |
| pci_disable_msi(pdev); |
| err_mem_regions: |
| intel_memory_regions_driver_release(dev_priv); |
| err_ggtt: |
| i915_ggtt_driver_release(dev_priv); |
| i915_gem_drain_freed_objects(dev_priv); |
| i915_ggtt_driver_late_release(dev_priv); |
| err_perf: |
| i915_perf_fini(dev_priv); |
| return ret; |
| } |
| |
| /** |
| * i915_driver_hw_remove - cleanup the setup done in i915_driver_hw_probe() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_hw_remove(struct drm_i915_private *dev_priv) |
| { |
| struct intel_display *display = &dev_priv->display; |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| |
| i915_perf_fini(dev_priv); |
| |
| intel_opregion_cleanup(display); |
| |
| if (pdev->msi_enabled) |
| pci_disable_msi(pdev); |
| } |
| |
| /** |
| * i915_driver_register - register the driver with the rest of the system |
| * @dev_priv: device private |
| * |
| * Perform any steps necessary to make the driver available via kernel |
| * internal or userspace interfaces. |
| */ |
| static void i915_driver_register(struct drm_i915_private *dev_priv) |
| { |
| struct intel_gt *gt; |
| unsigned int i; |
| |
| i915_gem_driver_register(dev_priv); |
| i915_pmu_register(dev_priv); |
| |
| intel_vgpu_register(dev_priv); |
| |
| /* Reveal our presence to userspace */ |
| if (drm_dev_register(&dev_priv->drm, 0)) { |
| drm_err(&dev_priv->drm, |
| "Failed to register driver for userspace access!\n"); |
| return; |
| } |
| |
| i915_debugfs_register(dev_priv); |
| i915_setup_sysfs(dev_priv); |
| |
| /* Depends on sysfs having been initialized */ |
| i915_perf_register(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_driver_register(gt); |
| |
| intel_pxp_debugfs_register(dev_priv->pxp); |
| |
| i915_hwmon_register(dev_priv); |
| |
| intel_display_driver_register(dev_priv); |
| |
| intel_power_domains_enable(dev_priv); |
| intel_runtime_pm_enable(&dev_priv->runtime_pm); |
| |
| intel_register_dsm_handler(); |
| |
| if (i915_switcheroo_register(dev_priv)) |
| drm_err(&dev_priv->drm, "Failed to register vga switcheroo!\n"); |
| } |
| |
| /** |
| * i915_driver_unregister - cleanup the registration done in i915_driver_regiser() |
| * @dev_priv: device private |
| */ |
| static void i915_driver_unregister(struct drm_i915_private *dev_priv) |
| { |
| struct intel_gt *gt; |
| unsigned int i; |
| |
| i915_switcheroo_unregister(dev_priv); |
| |
| intel_unregister_dsm_handler(); |
| |
| intel_runtime_pm_disable(&dev_priv->runtime_pm); |
| intel_power_domains_disable(dev_priv); |
| |
| intel_display_driver_unregister(dev_priv); |
| |
| intel_pxp_fini(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_driver_unregister(gt); |
| |
| i915_hwmon_unregister(dev_priv); |
| |
| i915_perf_unregister(dev_priv); |
| i915_pmu_unregister(dev_priv); |
| |
| i915_teardown_sysfs(dev_priv); |
| drm_dev_unplug(&dev_priv->drm); |
| |
| i915_gem_driver_unregister(dev_priv); |
| } |
| |
| void |
| i915_print_iommu_status(struct drm_i915_private *i915, struct drm_printer *p) |
| { |
| drm_printf(p, "iommu: %s\n", |
| str_enabled_disabled(i915_vtd_active(i915))); |
| } |
| |
| static void i915_welcome_messages(struct drm_i915_private *dev_priv) |
| { |
| if (drm_debug_enabled(DRM_UT_DRIVER)) { |
| struct drm_printer p = drm_dbg_printer(&dev_priv->drm, DRM_UT_DRIVER, |
| "device info:"); |
| struct intel_gt *gt; |
| unsigned int i; |
| |
| drm_printf(&p, "pciid=0x%04x rev=0x%02x platform=%s (subplatform=0x%x) gen=%i\n", |
| INTEL_DEVID(dev_priv), |
| INTEL_REVID(dev_priv), |
| intel_platform_name(INTEL_INFO(dev_priv)->platform), |
| intel_subplatform(RUNTIME_INFO(dev_priv), |
| INTEL_INFO(dev_priv)->platform), |
| GRAPHICS_VER(dev_priv)); |
| |
| intel_device_info_print(INTEL_INFO(dev_priv), |
| RUNTIME_INFO(dev_priv), &p); |
| i915_print_iommu_status(dev_priv, &p); |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_info_print(>->info, &p); |
| } |
| |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG)) |
| drm_info(&dev_priv->drm, "DRM_I915_DEBUG enabled\n"); |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)) |
| drm_info(&dev_priv->drm, "DRM_I915_DEBUG_GEM enabled\n"); |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM)) |
| drm_info(&dev_priv->drm, |
| "DRM_I915_DEBUG_RUNTIME_PM enabled\n"); |
| } |
| |
| static struct drm_i915_private * |
| i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| const struct intel_device_info *match_info = |
| (struct intel_device_info *)ent->driver_data; |
| struct drm_i915_private *i915; |
| |
| i915 = devm_drm_dev_alloc(&pdev->dev, &i915_drm_driver, |
| struct drm_i915_private, drm); |
| if (IS_ERR(i915)) |
| return i915; |
| |
| pci_set_drvdata(pdev, &i915->drm); |
| |
| /* Device parameters start as a copy of module parameters. */ |
| i915_params_copy(&i915->params, &i915_modparams); |
| |
| /* Set up device info and initial runtime info. */ |
| intel_device_info_driver_create(i915, pdev->device, match_info); |
| |
| intel_display_device_probe(i915); |
| |
| return i915; |
| } |
| |
| /** |
| * i915_driver_probe - setup chip and create an initial config |
| * @pdev: PCI device |
| * @ent: matching PCI ID entry |
| * |
| * The driver probe routine has to do several things: |
| * - drive output discovery via intel_display_driver_probe() |
| * - initialize the memory manager |
| * - allocate initial config memory |
| * - setup the DRM framebuffer with the allocated memory |
| */ |
| int i915_driver_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct drm_i915_private *i915; |
| int ret; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) { |
| pr_err("Failed to enable graphics device: %pe\n", ERR_PTR(ret)); |
| return ret; |
| } |
| |
| i915 = i915_driver_create(pdev, ent); |
| if (IS_ERR(i915)) { |
| pci_disable_device(pdev); |
| return PTR_ERR(i915); |
| } |
| |
| ret = i915_driver_early_probe(i915); |
| if (ret < 0) |
| goto out_pci_disable; |
| |
| disable_rpm_wakeref_asserts(&i915->runtime_pm); |
| |
| intel_vgpu_detect(i915); |
| |
| ret = intel_gt_probe_all(i915); |
| if (ret < 0) |
| goto out_runtime_pm_put; |
| |
| ret = i915_driver_mmio_probe(i915); |
| if (ret < 0) |
| goto out_runtime_pm_put; |
| |
| ret = i915_driver_hw_probe(i915); |
| if (ret < 0) |
| goto out_cleanup_mmio; |
| |
| ret = intel_display_driver_probe_noirq(i915); |
| if (ret < 0) |
| goto out_cleanup_hw; |
| |
| ret = intel_irq_install(i915); |
| if (ret) |
| goto out_cleanup_modeset; |
| |
| ret = intel_display_driver_probe_nogem(i915); |
| if (ret) |
| goto out_cleanup_irq; |
| |
| ret = i915_gem_init(i915); |
| if (ret) |
| goto out_cleanup_modeset2; |
| |
| ret = intel_pxp_init(i915); |
| if (ret && ret != -ENODEV) |
| drm_dbg(&i915->drm, "pxp init failed with %d\n", ret); |
| |
| ret = intel_display_driver_probe(i915); |
| if (ret) |
| goto out_cleanup_gem; |
| |
| i915_driver_register(i915); |
| |
| enable_rpm_wakeref_asserts(&i915->runtime_pm); |
| |
| i915_welcome_messages(i915); |
| |
| i915->do_release = true; |
| |
| return 0; |
| |
| out_cleanup_gem: |
| i915_gem_suspend(i915); |
| i915_gem_driver_remove(i915); |
| i915_gem_driver_release(i915); |
| out_cleanup_modeset2: |
| /* FIXME clean up the error path */ |
| intel_display_driver_remove(i915); |
| intel_irq_uninstall(i915); |
| intel_display_driver_remove_noirq(i915); |
| goto out_cleanup_modeset; |
| out_cleanup_irq: |
| intel_irq_uninstall(i915); |
| out_cleanup_modeset: |
| intel_display_driver_remove_nogem(i915); |
| out_cleanup_hw: |
| i915_driver_hw_remove(i915); |
| intel_memory_regions_driver_release(i915); |
| i915_ggtt_driver_release(i915); |
| i915_gem_drain_freed_objects(i915); |
| i915_ggtt_driver_late_release(i915); |
| out_cleanup_mmio: |
| i915_driver_mmio_release(i915); |
| out_runtime_pm_put: |
| enable_rpm_wakeref_asserts(&i915->runtime_pm); |
| i915_driver_late_release(i915); |
| out_pci_disable: |
| pci_disable_device(pdev); |
| i915_probe_error(i915, "Device initialization failed (%d)\n", ret); |
| return ret; |
| } |
| |
| void i915_driver_remove(struct drm_i915_private *i915) |
| { |
| intel_wakeref_t wakeref; |
| |
| wakeref = intel_runtime_pm_get(&i915->runtime_pm); |
| |
| i915_driver_unregister(i915); |
| |
| /* Flush any external code that still may be under the RCU lock */ |
| synchronize_rcu(); |
| |
| i915_gem_suspend(i915); |
| |
| intel_gvt_driver_remove(i915); |
| |
| intel_display_driver_remove(i915); |
| |
| intel_irq_uninstall(i915); |
| |
| intel_display_driver_remove_noirq(i915); |
| |
| i915_reset_error_state(i915); |
| i915_gem_driver_remove(i915); |
| |
| intel_display_driver_remove_nogem(i915); |
| |
| i915_driver_hw_remove(i915); |
| |
| intel_runtime_pm_put(&i915->runtime_pm, wakeref); |
| } |
| |
| static void i915_driver_release(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| intel_wakeref_t wakeref; |
| |
| if (!dev_priv->do_release) |
| return; |
| |
| wakeref = intel_runtime_pm_get(rpm); |
| |
| i915_gem_driver_release(dev_priv); |
| |
| intel_memory_regions_driver_release(dev_priv); |
| i915_ggtt_driver_release(dev_priv); |
| i915_gem_drain_freed_objects(dev_priv); |
| i915_ggtt_driver_late_release(dev_priv); |
| |
| i915_driver_mmio_release(dev_priv); |
| |
| intel_runtime_pm_put(rpm, wakeref); |
| |
| intel_runtime_pm_driver_release(rpm); |
| |
| i915_driver_late_release(dev_priv); |
| |
| intel_display_device_remove(dev_priv); |
| } |
| |
| static int i915_driver_open(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_private *i915 = to_i915(dev); |
| int ret; |
| |
| ret = i915_gem_open(i915, file); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| i915_gem_context_close(file); |
| i915_drm_client_put(file_priv->client); |
| |
| kfree_rcu(file_priv, rcu); |
| |
| /* Catch up with all the deferred frees from "this" client */ |
| i915_gem_flush_free_objects(to_i915(dev)); |
| } |
| |
| void i915_driver_shutdown(struct drm_i915_private *i915) |
| { |
| disable_rpm_wakeref_asserts(&i915->runtime_pm); |
| intel_runtime_pm_disable(&i915->runtime_pm); |
| intel_power_domains_disable(i915); |
| |
| intel_fbdev_set_suspend(&i915->drm, FBINFO_STATE_SUSPENDED, true); |
| if (HAS_DISPLAY(i915)) { |
| drm_kms_helper_poll_disable(&i915->drm); |
| intel_display_driver_disable_user_access(i915); |
| |
| drm_atomic_helper_shutdown(&i915->drm); |
| } |
| |
| intel_dp_mst_suspend(i915); |
| |
| intel_runtime_pm_disable_interrupts(i915); |
| intel_hpd_cancel_work(i915); |
| |
| if (HAS_DISPLAY(i915)) |
| intel_display_driver_suspend_access(i915); |
| |
| intel_encoder_suspend_all(&i915->display); |
| intel_encoder_shutdown_all(&i915->display); |
| |
| intel_dmc_suspend(i915); |
| |
| i915_gem_suspend(i915); |
| |
| /* |
| * The only requirement is to reboot with display DC states disabled, |
| * for now leaving all display power wells in the INIT power domain |
| * enabled. |
| * |
| * TODO: |
| * - unify the pci_driver::shutdown sequence here with the |
| * pci_driver.driver.pm.poweroff,poweroff_late sequence. |
| * - unify the driver remove and system/runtime suspend sequences with |
| * the above unified shutdown/poweroff sequence. |
| */ |
| intel_power_domains_driver_remove(i915); |
| enable_rpm_wakeref_asserts(&i915->runtime_pm); |
| |
| intel_runtime_pm_driver_last_release(&i915->runtime_pm); |
| } |
| |
| static bool suspend_to_idle(struct drm_i915_private *dev_priv) |
| { |
| #if IS_ENABLED(CONFIG_ACPI_SLEEP) |
| if (acpi_target_system_state() < ACPI_STATE_S3) |
| return true; |
| #endif |
| return false; |
| } |
| |
| static void i915_drm_complete(struct drm_device *dev) |
| { |
| struct drm_i915_private *i915 = to_i915(dev); |
| |
| intel_pxp_resume_complete(i915->pxp); |
| } |
| |
| static int i915_drm_prepare(struct drm_device *dev) |
| { |
| struct drm_i915_private *i915 = to_i915(dev); |
| |
| intel_pxp_suspend_prepare(i915->pxp); |
| |
| /* |
| * NB intel_display_driver_suspend() may issue new requests after we've |
| * ostensibly marked the GPU as ready-to-sleep here. We need to |
| * split out that work and pull it forward so that after point, |
| * the GPU is not woken again. |
| */ |
| return i915_gem_backup_suspend(i915); |
| } |
| |
| static int i915_drm_suspend(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_display *display = &dev_priv->display; |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| pci_power_t opregion_target_state; |
| |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| /* We do a lot of poking in a lot of registers, make sure they work |
| * properly. */ |
| intel_power_domains_disable(dev_priv); |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true); |
| if (HAS_DISPLAY(dev_priv)) { |
| drm_kms_helper_poll_disable(dev); |
| intel_display_driver_disable_user_access(dev_priv); |
| } |
| |
| pci_save_state(pdev); |
| |
| intel_display_driver_suspend(dev_priv); |
| |
| intel_dp_mst_suspend(dev_priv); |
| |
| intel_runtime_pm_disable_interrupts(dev_priv); |
| intel_hpd_cancel_work(dev_priv); |
| |
| if (HAS_DISPLAY(dev_priv)) |
| intel_display_driver_suspend_access(dev_priv); |
| |
| intel_encoder_suspend_all(&dev_priv->display); |
| |
| /* Must be called before GGTT is suspended. */ |
| intel_dpt_suspend(dev_priv); |
| i915_ggtt_suspend(to_gt(dev_priv)->ggtt); |
| |
| i915_save_display(dev_priv); |
| |
| opregion_target_state = suspend_to_idle(dev_priv) ? PCI_D1 : PCI_D3cold; |
| intel_opregion_suspend(display, opregion_target_state); |
| |
| dev_priv->suspend_count++; |
| |
| intel_dmc_suspend(dev_priv); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| i915_gem_drain_freed_objects(dev_priv); |
| |
| return 0; |
| } |
| |
| static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| struct intel_gt *gt; |
| int ret, i; |
| bool s2idle = !hibernation && suspend_to_idle(dev_priv); |
| |
| disable_rpm_wakeref_asserts(rpm); |
| |
| intel_pxp_suspend(dev_priv->pxp); |
| |
| i915_gem_suspend_late(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_uncore_suspend(gt->uncore); |
| |
| intel_power_domains_suspend(dev_priv, s2idle); |
| |
| intel_display_power_suspend_late(dev_priv); |
| |
| ret = vlv_suspend_complete(dev_priv); |
| if (ret) { |
| drm_err(&dev_priv->drm, "Suspend complete failed: %d\n", ret); |
| intel_power_domains_resume(dev_priv); |
| |
| goto out; |
| } |
| |
| pci_disable_device(pdev); |
| /* |
| * During hibernation on some platforms the BIOS may try to access |
| * the device even though it's already in D3 and hang the machine. So |
| * leave the device in D0 on those platforms and hope the BIOS will |
| * power down the device properly. The issue was seen on multiple old |
| * GENs with different BIOS vendors, so having an explicit blacklist |
| * is inpractical; apply the workaround on everything pre GEN6. The |
| * platforms where the issue was seen: |
| * Lenovo Thinkpad X301, X61s, X60, T60, X41 |
| * Fujitsu FSC S7110 |
| * Acer Aspire 1830T |
| */ |
| if (!(hibernation && GRAPHICS_VER(dev_priv) < 6)) |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| out: |
| enable_rpm_wakeref_asserts(rpm); |
| if (!dev_priv->uncore.user_forcewake_count) |
| intel_runtime_pm_driver_release(rpm); |
| |
| return ret; |
| } |
| |
| int i915_driver_suspend_switcheroo(struct drm_i915_private *i915, |
| pm_message_t state) |
| { |
| int error; |
| |
| if (drm_WARN_ON_ONCE(&i915->drm, state.event != PM_EVENT_SUSPEND && |
| state.event != PM_EVENT_FREEZE)) |
| return -EINVAL; |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| error = i915_drm_suspend(&i915->drm); |
| if (error) |
| return error; |
| |
| return i915_drm_suspend_late(&i915->drm, false); |
| } |
| |
| static int i915_drm_resume(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_display *display = &dev_priv->display; |
| struct intel_gt *gt; |
| int ret, i; |
| |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| ret = i915_pcode_init(dev_priv); |
| if (ret) |
| return ret; |
| |
| sanitize_gpu(dev_priv); |
| |
| ret = i915_ggtt_enable_hw(dev_priv); |
| if (ret) |
| drm_err(&dev_priv->drm, "failed to re-enable GGTT\n"); |
| |
| i915_ggtt_resume(to_gt(dev_priv)->ggtt); |
| |
| for_each_gt(gt, dev_priv, i) |
| if (GRAPHICS_VER(gt->i915) >= 8) |
| setup_private_pat(gt); |
| |
| /* Must be called after GGTT is resumed. */ |
| intel_dpt_resume(dev_priv); |
| |
| intel_dmc_resume(dev_priv); |
| |
| i915_restore_display(dev_priv); |
| intel_pps_unlock_regs_wa(display); |
| |
| intel_init_pch_refclk(dev_priv); |
| |
| /* |
| * Interrupts have to be enabled before any batches are run. If not the |
| * GPU will hang. i915_gem_init_hw() will initiate batches to |
| * update/restore the context. |
| * |
| * drm_mode_config_reset() needs AUX interrupts. |
| * |
| * Modeset enabling in intel_display_driver_init_hw() also needs working |
| * interrupts. |
| */ |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| if (HAS_DISPLAY(dev_priv)) |
| drm_mode_config_reset(dev); |
| |
| i915_gem_resume(dev_priv); |
| |
| intel_display_driver_init_hw(dev_priv); |
| |
| intel_clock_gating_init(dev_priv); |
| |
| if (HAS_DISPLAY(dev_priv)) |
| intel_display_driver_resume_access(dev_priv); |
| |
| intel_hpd_init(dev_priv); |
| |
| /* MST sideband requires HPD interrupts enabled */ |
| intel_dp_mst_resume(dev_priv); |
| intel_display_driver_resume(dev_priv); |
| |
| if (HAS_DISPLAY(dev_priv)) { |
| intel_display_driver_enable_user_access(dev_priv); |
| drm_kms_helper_poll_enable(dev); |
| } |
| intel_hpd_poll_disable(dev_priv); |
| |
| intel_opregion_resume(display); |
| |
| intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false); |
| |
| intel_power_domains_enable(dev_priv); |
| |
| intel_gvt_resume(dev_priv); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return 0; |
| } |
| |
| static int i915_drm_resume_early(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| struct intel_gt *gt; |
| int ret, i; |
| |
| /* |
| * We have a resume ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an early |
| * resume hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| |
| /* |
| * Note that we need to set the power state explicitly, since we |
| * powered off the device during freeze and the PCI core won't power |
| * it back up for us during thaw. Powering off the device during |
| * freeze is not a hard requirement though, and during the |
| * suspend/resume phases the PCI core makes sure we get here with the |
| * device powered on. So in case we change our freeze logic and keep |
| * the device powered we can also remove the following set power state |
| * call. |
| */ |
| ret = pci_set_power_state(pdev, PCI_D0); |
| if (ret) { |
| drm_err(&dev_priv->drm, |
| "failed to set PCI D0 power state (%d)\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Note that pci_enable_device() first enables any parent bridge |
| * device and only then sets the power state for this device. The |
| * bridge enabling is a nop though, since bridge devices are resumed |
| * first. The order of enabling power and enabling the device is |
| * imposed by the PCI core as described above, so here we preserve the |
| * same order for the freeze/thaw phases. |
| * |
| * TODO: eventually we should remove pci_disable_device() / |
| * pci_enable_enable_device() from suspend/resume. Due to how they |
| * depend on the device enable refcount we can't anyway depend on them |
| * disabling/enabling the device. |
| */ |
| if (pci_enable_device(pdev)) |
| return -EIO; |
| |
| pci_set_master(pdev); |
| |
| disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| ret = vlv_resume_prepare(dev_priv, false); |
| if (ret) |
| drm_err(&dev_priv->drm, |
| "Resume prepare failed: %d, continuing anyway\n", ret); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_resume_early(gt); |
| |
| intel_display_power_resume_early(dev_priv); |
| |
| intel_power_domains_resume(dev_priv); |
| |
| enable_rpm_wakeref_asserts(&dev_priv->runtime_pm); |
| |
| return ret; |
| } |
| |
| int i915_driver_resume_switcheroo(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| ret = i915_drm_resume_early(&i915->drm); |
| if (ret) |
| return ret; |
| |
| return i915_drm_resume(&i915->drm); |
| } |
| |
| static int i915_pm_prepare(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (!i915) { |
| dev_err(kdev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_prepare(&i915->drm); |
| } |
| |
| static int i915_pm_suspend(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (!i915) { |
| dev_err(kdev, "DRM not initialized, aborting suspend.\n"); |
| return -ENODEV; |
| } |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend(&i915->drm); |
| } |
| |
| static int i915_pm_suspend_late(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| /* |
| * We have a suspend ordering issue with the snd-hda driver also |
| * requiring our device to be power up. Due to the lack of a |
| * parent/child relationship we currently solve this with an late |
| * suspend hook. |
| * |
| * FIXME: This should be solved with a special hdmi sink device or |
| * similar so that power domains can be employed. |
| */ |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend_late(&i915->drm, false); |
| } |
| |
| static int i915_pm_poweroff_late(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_suspend_late(&i915->drm, true); |
| } |
| |
| static int i915_pm_resume_early(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_resume_early(&i915->drm); |
| } |
| |
| static int i915_pm_resume(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return 0; |
| |
| return i915_drm_resume(&i915->drm); |
| } |
| |
| static void i915_pm_complete(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| |
| if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) |
| return; |
| |
| i915_drm_complete(&i915->drm); |
| } |
| |
| /* freeze: before creating the hibernation_image */ |
| static int i915_pm_freeze(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| int ret; |
| |
| if (i915->drm.switch_power_state != DRM_SWITCH_POWER_OFF) { |
| ret = i915_drm_suspend(&i915->drm); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_gem_freeze(i915); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int i915_pm_freeze_late(struct device *kdev) |
| { |
| struct drm_i915_private *i915 = kdev_to_i915(kdev); |
| int ret; |
| |
| if (i915->drm.switch_power_state != DRM_SWITCH_POWER_OFF) { |
| ret = i915_drm_suspend_late(&i915->drm, true); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_gem_freeze_late(i915); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* thaw: called after creating the hibernation image, but before turning off. */ |
| static int i915_pm_thaw_early(struct device *kdev) |
| { |
| return i915_pm_resume_early(kdev); |
| } |
| |
| static int i915_pm_thaw(struct device *kdev) |
| { |
| return i915_pm_resume(kdev); |
| } |
| |
| /* restore: called after loading the hibernation image. */ |
| static int i915_pm_restore_early(struct device *kdev) |
| { |
| return i915_pm_resume_early(kdev); |
| } |
| |
| static int i915_pm_restore(struct device *kdev) |
| { |
| return i915_pm_resume(kdev); |
| } |
| |
| static int intel_runtime_suspend(struct device *kdev) |
| { |
| struct drm_i915_private *dev_priv = kdev_to_i915(kdev); |
| struct intel_display *display = &dev_priv->display; |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| struct pci_dev *root_pdev; |
| struct intel_gt *gt; |
| int ret, i; |
| |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !HAS_RUNTIME_PM(dev_priv))) |
| return -ENODEV; |
| |
| drm_dbg(&dev_priv->drm, "Suspending device\n"); |
| |
| disable_rpm_wakeref_asserts(rpm); |
| |
| /* |
| * We are safe here against re-faults, since the fault handler takes |
| * an RPM reference. |
| */ |
| i915_gem_runtime_suspend(dev_priv); |
| |
| intel_pxp_runtime_suspend(dev_priv->pxp); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_runtime_suspend(gt); |
| |
| intel_runtime_pm_disable_interrupts(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_uncore_suspend(gt->uncore); |
| |
| intel_display_power_suspend(dev_priv); |
| |
| ret = vlv_suspend_complete(dev_priv); |
| if (ret) { |
| drm_err(&dev_priv->drm, |
| "Runtime suspend failed, disabling it (%d)\n", ret); |
| intel_uncore_runtime_resume(&dev_priv->uncore); |
| |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_runtime_resume(gt); |
| |
| enable_rpm_wakeref_asserts(rpm); |
| |
| return ret; |
| } |
| |
| enable_rpm_wakeref_asserts(rpm); |
| intel_runtime_pm_driver_release(rpm); |
| |
| if (intel_uncore_arm_unclaimed_mmio_detection(&dev_priv->uncore)) |
| drm_err(&dev_priv->drm, |
| "Unclaimed access detected prior to suspending\n"); |
| |
| /* |
| * FIXME: Temporary hammer to avoid freezing the machine on our DGFX |
| * This should be totally removed when we handle the pci states properly |
| * on runtime PM. |
| */ |
| root_pdev = pcie_find_root_port(pdev); |
| if (root_pdev) |
| pci_d3cold_disable(root_pdev); |
| |
| /* |
| * FIXME: We really should find a document that references the arguments |
| * used below! |
| */ |
| if (IS_BROADWELL(dev_priv)) { |
| /* |
| * On Broadwell, if we use PCI_D1 the PCH DDI ports will stop |
| * being detected, and the call we do at intel_runtime_resume() |
| * won't be able to restore them. Since PCI_D3hot matches the |
| * actual specification and appears to be working, use it. |
| */ |
| intel_opregion_notify_adapter(display, PCI_D3hot); |
| } else { |
| /* |
| * current versions of firmware which depend on this opregion |
| * notification have repurposed the D1 definition to mean |
| * "runtime suspended" vs. what you would normally expect (D3) |
| * to distinguish it from notifications that might be sent via |
| * the suspend path. |
| */ |
| intel_opregion_notify_adapter(display, PCI_D1); |
| } |
| |
| assert_forcewakes_inactive(&dev_priv->uncore); |
| |
| if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) |
| intel_hpd_poll_enable(dev_priv); |
| |
| drm_dbg(&dev_priv->drm, "Device suspended\n"); |
| return 0; |
| } |
| |
| static int intel_runtime_resume(struct device *kdev) |
| { |
| struct drm_i915_private *dev_priv = kdev_to_i915(kdev); |
| struct intel_display *display = &dev_priv->display; |
| struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; |
| struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); |
| struct pci_dev *root_pdev; |
| struct intel_gt *gt; |
| int ret, i; |
| |
| if (drm_WARN_ON_ONCE(&dev_priv->drm, !HAS_RUNTIME_PM(dev_priv))) |
| return -ENODEV; |
| |
| drm_dbg(&dev_priv->drm, "Resuming device\n"); |
| |
| drm_WARN_ON_ONCE(&dev_priv->drm, atomic_read(&rpm->wakeref_count)); |
| disable_rpm_wakeref_asserts(rpm); |
| |
| intel_opregion_notify_adapter(display, PCI_D0); |
| |
| root_pdev = pcie_find_root_port(pdev); |
| if (root_pdev) |
| pci_d3cold_enable(root_pdev); |
| |
| if (intel_uncore_unclaimed_mmio(&dev_priv->uncore)) |
| drm_dbg(&dev_priv->drm, |
| "Unclaimed access during suspend, bios?\n"); |
| |
| intel_display_power_resume(dev_priv); |
| |
| ret = vlv_resume_prepare(dev_priv, true); |
| |
| for_each_gt(gt, dev_priv, i) |
| intel_uncore_runtime_resume(gt->uncore); |
| |
| intel_runtime_pm_enable_interrupts(dev_priv); |
| |
| /* |
| * No point of rolling back things in case of an error, as the best |
| * we can do is to hope that things will still work (and disable RPM). |
| */ |
| for_each_gt(gt, dev_priv, i) |
| intel_gt_runtime_resume(gt); |
| |
| intel_pxp_runtime_resume(dev_priv->pxp); |
| |
| /* |
| * On VLV/CHV display interrupts are part of the display |
| * power well, so hpd is reinitialized from there. For |
| * everyone else do it here. |
| */ |
| if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) { |
| intel_hpd_init(dev_priv); |
| intel_hpd_poll_disable(dev_priv); |
| } |
| |
| skl_watermark_ipc_update(dev_priv); |
| |
| enable_rpm_wakeref_asserts(rpm); |
| |
| if (ret) |
| drm_err(&dev_priv->drm, |
| "Runtime resume failed, disabling it (%d)\n", ret); |
| else |
| drm_dbg(&dev_priv->drm, "Device resumed\n"); |
| |
| return ret; |
| } |
| |
| const struct dev_pm_ops i915_pm_ops = { |
| /* |
| * S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND, |
| * PMSG_RESUME] |
| */ |
| .prepare = i915_pm_prepare, |
| .suspend = i915_pm_suspend, |
| .suspend_late = i915_pm_suspend_late, |
| .resume_early = i915_pm_resume_early, |
| .resume = i915_pm_resume, |
| .complete = i915_pm_complete, |
| |
| /* |
| * S4 event handlers |
| * @freeze, @freeze_late : called (1) before creating the |
| * hibernation image [PMSG_FREEZE] and |
| * (2) after rebooting, before restoring |
| * the image [PMSG_QUIESCE] |
| * @thaw, @thaw_early : called (1) after creating the hibernation |
| * image, before writing it [PMSG_THAW] |
| * and (2) after failing to create or |
| * restore the image [PMSG_RECOVER] |
| * @poweroff, @poweroff_late: called after writing the hibernation |
| * image, before rebooting [PMSG_HIBERNATE] |
| * @restore, @restore_early : called after rebooting and restoring the |
| * hibernation image [PMSG_RESTORE] |
| */ |
| .freeze = i915_pm_freeze, |
| .freeze_late = i915_pm_freeze_late, |
| .thaw_early = i915_pm_thaw_early, |
| .thaw = i915_pm_thaw, |
| .poweroff = i915_pm_suspend, |
| .poweroff_late = i915_pm_poweroff_late, |
| .restore_early = i915_pm_restore_early, |
| .restore = i915_pm_restore, |
| |
| /* S0ix (via runtime suspend) event handlers */ |
| .runtime_suspend = intel_runtime_suspend, |
| .runtime_resume = intel_runtime_resume, |
| }; |
| |
| static const struct file_operations i915_driver_fops = { |
| .owner = THIS_MODULE, |
| .open = drm_open, |
| .release = drm_release_noglobal, |
| .unlocked_ioctl = drm_ioctl, |
| .mmap = i915_gem_mmap, |
| .poll = drm_poll, |
| .read = drm_read, |
| .compat_ioctl = i915_ioc32_compat_ioctl, |
| .llseek = noop_llseek, |
| #ifdef CONFIG_PROC_FS |
| .show_fdinfo = drm_show_fdinfo, |
| #endif |
| .fop_flags = FOP_UNSIGNED_OFFSET, |
| }; |
| |
| static int |
| i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| return -ENODEV; |
| } |
| |
| static const struct drm_ioctl_desc i915_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, drm_invalid_op, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2_WR, i915_gem_execbuffer2_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CREATE_EXT, i915_gem_create_ext_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_OFFSET, i915_gem_mmap_offset_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE_EXT, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_OPEN, i915_perf_open_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_ADD_CONFIG, i915_perf_add_config_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_PERF_REMOVE_CONFIG, i915_perf_remove_config_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_QUERY, i915_query_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_VM_CREATE, i915_gem_vm_create_ioctl, DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(I915_GEM_VM_DESTROY, i915_gem_vm_destroy_ioctl, DRM_RENDER_ALLOW), |
| }; |
| |
| /* |
| * Interface history: |
| * |
| * 1.1: Original. |
| * 1.2: Add Power Management |
| * 1.3: Add vblank support |
| * 1.4: Fix cmdbuffer path, add heap destroy |
| * 1.5: Add vblank pipe configuration |
| * 1.6: - New ioctl for scheduling buffer swaps on vertical blank |
| * - Support vertical blank on secondary display pipe |
| */ |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 6 |
| #define DRIVER_PATCHLEVEL 0 |
| |
| static const struct drm_driver i915_drm_driver = { |
| /* Don't use MTRRs here; the Xserver or userspace app should |
| * deal with them for Intel hardware. |
| */ |
| .driver_features = |
| DRIVER_GEM | |
| DRIVER_RENDER | DRIVER_MODESET | DRIVER_ATOMIC | DRIVER_SYNCOBJ | |
| DRIVER_SYNCOBJ_TIMELINE, |
| .release = i915_driver_release, |
| .open = i915_driver_open, |
| .postclose = i915_driver_postclose, |
| .show_fdinfo = PTR_IF(IS_ENABLED(CONFIG_PROC_FS), i915_drm_client_fdinfo), |
| |
| .gem_prime_import = i915_gem_prime_import, |
| |
| .dumb_create = i915_gem_dumb_create, |
| .dumb_map_offset = i915_gem_dumb_mmap_offset, |
| |
| .ioctls = i915_ioctls, |
| .num_ioctls = ARRAY_SIZE(i915_ioctls), |
| .fops = &i915_driver_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| }; |