| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * amc6821.c - Part of lm_sensors, Linux kernel modules for hardware |
| * monitoring |
| * Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si> |
| * |
| * Based on max6650.c: |
| * Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de> |
| * |
| * Conversion to regmap and with_info API: |
| * Copyright (C) 2024 Guenter Roeck <linux@roeck-us.net> |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/bits.h> |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/minmax.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_platform.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| /* |
| * Addresses to scan. |
| */ |
| |
| static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, |
| 0x4c, 0x4d, 0x4e, I2C_CLIENT_END}; |
| |
| /* |
| * Insmod parameters |
| */ |
| |
| static int pwminv; /*Inverted PWM output. */ |
| module_param(pwminv, int, 0444); |
| |
| static int init = 1; /*Power-on initialization.*/ |
| module_param(init, int, 0444); |
| |
| #define AMC6821_REG_DEV_ID 0x3D |
| #define AMC6821_REG_COMP_ID 0x3E |
| #define AMC6821_REG_CONF1 0x00 |
| #define AMC6821_REG_CONF2 0x01 |
| #define AMC6821_REG_CONF3 0x3F |
| #define AMC6821_REG_CONF4 0x04 |
| #define AMC6821_REG_STAT1 0x02 |
| #define AMC6821_REG_STAT2 0x03 |
| #define AMC6821_REG_TEMP_LO 0x06 |
| #define AMC6821_REG_TDATA_LOW 0x08 |
| #define AMC6821_REG_TDATA_HI 0x09 |
| #define AMC6821_REG_LTEMP_HI 0x0A |
| #define AMC6821_REG_RTEMP_HI 0x0B |
| #define AMC6821_REG_LTEMP_LIMIT_MIN 0x15 |
| #define AMC6821_REG_LTEMP_LIMIT_MAX 0x14 |
| #define AMC6821_REG_RTEMP_LIMIT_MIN 0x19 |
| #define AMC6821_REG_RTEMP_LIMIT_MAX 0x18 |
| #define AMC6821_REG_LTEMP_CRIT 0x1B |
| #define AMC6821_REG_RTEMP_CRIT 0x1D |
| #define AMC6821_REG_PSV_TEMP 0x1C |
| #define AMC6821_REG_DCY 0x22 |
| #define AMC6821_REG_LTEMP_FAN_CTRL 0x24 |
| #define AMC6821_REG_RTEMP_FAN_CTRL 0x25 |
| #define AMC6821_REG_DCY_LOW_TEMP 0x21 |
| |
| #define AMC6821_REG_TACH_LLIMITL 0x10 |
| #define AMC6821_REG_TACH_HLIMITL 0x12 |
| #define AMC6821_REG_TACH_SETTINGL 0x1e |
| |
| #define AMC6821_CONF1_START BIT(0) |
| #define AMC6821_CONF1_FAN_INT_EN BIT(1) |
| #define AMC6821_CONF1_FANIE BIT(2) |
| #define AMC6821_CONF1_PWMINV BIT(3) |
| #define AMC6821_CONF1_FAN_FAULT_EN BIT(4) |
| #define AMC6821_CONF1_FDRC0 BIT(5) |
| #define AMC6821_CONF1_FDRC1 BIT(6) |
| #define AMC6821_CONF1_THERMOVIE BIT(7) |
| |
| #define AMC6821_CONF2_PWM_EN BIT(0) |
| #define AMC6821_CONF2_TACH_MODE BIT(1) |
| #define AMC6821_CONF2_TACH_EN BIT(2) |
| #define AMC6821_CONF2_RTFIE BIT(3) |
| #define AMC6821_CONF2_LTOIE BIT(4) |
| #define AMC6821_CONF2_RTOIE BIT(5) |
| #define AMC6821_CONF2_PSVIE BIT(6) |
| #define AMC6821_CONF2_RST BIT(7) |
| |
| #define AMC6821_CONF3_THERM_FAN_EN BIT(7) |
| #define AMC6821_CONF3_REV_MASK GENMASK(3, 0) |
| |
| #define AMC6821_CONF4_OVREN BIT(4) |
| #define AMC6821_CONF4_TACH_FAST BIT(5) |
| #define AMC6821_CONF4_PSPR BIT(6) |
| #define AMC6821_CONF4_MODE BIT(7) |
| |
| #define AMC6821_STAT1_RPM_ALARM BIT(0) |
| #define AMC6821_STAT1_FANS BIT(1) |
| #define AMC6821_STAT1_RTH BIT(2) |
| #define AMC6821_STAT1_RTL BIT(3) |
| #define AMC6821_STAT1_R_THERM BIT(4) |
| #define AMC6821_STAT1_RTF BIT(5) |
| #define AMC6821_STAT1_LTH BIT(6) |
| #define AMC6821_STAT1_LTL BIT(7) |
| |
| #define AMC6821_STAT2_RTC BIT(3) |
| #define AMC6821_STAT2_LTC BIT(4) |
| #define AMC6821_STAT2_LPSV BIT(5) |
| #define AMC6821_STAT2_L_THERM BIT(6) |
| #define AMC6821_STAT2_THERM_IN BIT(7) |
| |
| #define AMC6821_TEMP_SLOPE_MASK GENMASK(2, 0) |
| #define AMC6821_TEMP_LIMIT_MASK GENMASK(7, 3) |
| |
| /* |
| * Client data (each client gets its own) |
| */ |
| |
| struct amc6821_data { |
| struct regmap *regmap; |
| struct mutex update_lock; |
| }; |
| |
| /* |
| * Return 0 on success or negative error code. |
| * |
| * temps returns set of three temperatures, in °C: |
| * temps[0]: Passive cooling temperature, applies to both channels |
| * temps[1]: Low temperature, start slope calculations |
| * temps[2]: High temperature |
| * |
| * Channel 0: local, channel 1: remote. |
| */ |
| static int amc6821_get_auto_point_temps(struct regmap *regmap, int channel, u8 *temps) |
| { |
| u32 regs[] = { |
| AMC6821_REG_DCY_LOW_TEMP, |
| AMC6821_REG_PSV_TEMP, |
| channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL |
| }; |
| u8 regvals[3]; |
| int slope; |
| int err; |
| |
| err = regmap_multi_reg_read(regmap, regs, regvals, 3); |
| if (err) |
| return err; |
| temps[0] = regvals[1]; |
| temps[1] = FIELD_GET(AMC6821_TEMP_LIMIT_MASK, regvals[2]) * 4; |
| |
| /* slope is 32 >> <slope bits> in °C */ |
| slope = 32 >> FIELD_GET(AMC6821_TEMP_SLOPE_MASK, regvals[2]); |
| if (slope) |
| temps[2] = temps[1] + DIV_ROUND_CLOSEST(255 - regvals[0], slope); |
| else |
| temps[2] = 255; |
| |
| return 0; |
| } |
| |
| static int amc6821_temp_read_values(struct regmap *regmap, u32 attr, int channel, long *val) |
| { |
| int reg, err; |
| u32 regval; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| reg = channel ? AMC6821_REG_RTEMP_HI : AMC6821_REG_LTEMP_HI; |
| break; |
| case hwmon_temp_min: |
| reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN; |
| break; |
| case hwmon_temp_max: |
| reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX; |
| break; |
| case hwmon_temp_crit: |
| reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| err = regmap_read(regmap, reg, ®val); |
| if (err) |
| return err; |
| *val = sign_extend32(regval, 7) * 1000; |
| return 0; |
| } |
| |
| static int amc6821_read_alarms(struct regmap *regmap, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| int reg, mask, err; |
| u32 regval; |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_min_alarm: |
| reg = AMC6821_REG_STAT1; |
| mask = channel ? AMC6821_STAT1_RTL : AMC6821_STAT1_LTL; |
| break; |
| case hwmon_temp_max_alarm: |
| reg = AMC6821_REG_STAT1; |
| mask = channel ? AMC6821_STAT1_RTH : AMC6821_STAT1_LTH; |
| break; |
| case hwmon_temp_crit_alarm: |
| reg = AMC6821_REG_STAT2; |
| mask = channel ? AMC6821_STAT2_RTC : AMC6821_STAT2_LTC; |
| break; |
| case hwmon_temp_fault: |
| reg = AMC6821_REG_STAT1; |
| mask = AMC6821_STAT1_RTF; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_fault: |
| reg = AMC6821_REG_STAT1; |
| mask = AMC6821_STAT1_FANS; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| err = regmap_read(regmap, reg, ®val); |
| if (err) |
| return err; |
| *val = !!(regval & mask); |
| return 0; |
| } |
| |
| static int amc6821_temp_read(struct device *dev, u32 attr, int channel, long *val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| case hwmon_temp_min: |
| case hwmon_temp_max: |
| case hwmon_temp_crit: |
| return amc6821_temp_read_values(data->regmap, attr, channel, val); |
| case hwmon_temp_min_alarm: |
| case hwmon_temp_max_alarm: |
| case hwmon_temp_crit_alarm: |
| case hwmon_temp_fault: |
| return amc6821_read_alarms(data->regmap, hwmon_temp, attr, channel, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int amc6821_temp_write(struct device *dev, u32 attr, int channel, long val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| int reg; |
| |
| val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000); |
| |
| switch (attr) { |
| case hwmon_temp_min: |
| reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN; |
| break; |
| case hwmon_temp_max: |
| reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX; |
| break; |
| case hwmon_temp_crit: |
| reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return regmap_write(data->regmap, reg, val); |
| } |
| |
| static int amc6821_pwm_read(struct device *dev, u32 attr, long *val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| u32 regval; |
| int err; |
| |
| switch (attr) { |
| case hwmon_pwm_enable: |
| err = regmap_read(regmap, AMC6821_REG_CONF1, ®val); |
| if (err) |
| return err; |
| switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { |
| case 0: |
| *val = 1; /* manual */ |
| break; |
| case AMC6821_CONF1_FDRC0: |
| *val = 4; /* target rpm (fan1_target) controlled */ |
| break; |
| case AMC6821_CONF1_FDRC1: |
| *val = 2; /* remote temp controlled */ |
| break; |
| default: |
| *val = 3; /* max(local, remote) temp controlled */ |
| break; |
| } |
| return 0; |
| case hwmon_pwm_mode: |
| err = regmap_read(regmap, AMC6821_REG_CONF2, ®val); |
| if (err) |
| return err; |
| *val = !!(regval & AMC6821_CONF2_TACH_MODE); |
| return 0; |
| case hwmon_pwm_auto_channels_temp: |
| err = regmap_read(regmap, AMC6821_REG_CONF1, ®val); |
| if (err) |
| return err; |
| switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { |
| case 0: |
| case AMC6821_CONF1_FDRC0: |
| *val = 0; /* manual or target rpm controlled */ |
| break; |
| case AMC6821_CONF1_FDRC1: |
| *val = 2; /* remote temp controlled */ |
| break; |
| default: |
| *val = 3; /* max(local, remote) temp controlled */ |
| break; |
| } |
| return 0; |
| case hwmon_pwm_input: |
| err = regmap_read(regmap, AMC6821_REG_DCY, ®val); |
| if (err) |
| return err; |
| *val = regval; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int amc6821_pwm_write(struct device *dev, u32 attr, long val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| u32 mode; |
| |
| switch (attr) { |
| case hwmon_pwm_enable: |
| switch (val) { |
| case 1: |
| mode = 0; |
| break; |
| case 2: |
| mode = AMC6821_CONF1_FDRC1; |
| break; |
| case 3: |
| mode = AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1; |
| break; |
| case 4: |
| mode = AMC6821_CONF1_FDRC0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return regmap_update_bits(regmap, AMC6821_REG_CONF1, |
| AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1, |
| mode); |
| case hwmon_pwm_mode: |
| if (val < 0 || val > 1) |
| return -EINVAL; |
| return regmap_update_bits(regmap, AMC6821_REG_CONF2, |
| AMC6821_CONF2_TACH_MODE, |
| val ? AMC6821_CONF2_TACH_MODE : 0); |
| break; |
| case hwmon_pwm_input: |
| if (val < 0 || val > 255) |
| return -EINVAL; |
| return regmap_write(regmap, AMC6821_REG_DCY, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int amc6821_fan_read_rpm(struct regmap *regmap, u32 attr, long *val) |
| { |
| int reg, err; |
| u8 regs[2]; |
| u32 regval; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| reg = AMC6821_REG_TDATA_LOW; |
| break; |
| case hwmon_fan_min: |
| reg = AMC6821_REG_TACH_LLIMITL; |
| break; |
| case hwmon_fan_max: |
| reg = AMC6821_REG_TACH_HLIMITL; |
| break; |
| case hwmon_fan_target: |
| reg = AMC6821_REG_TACH_SETTINGL; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| err = regmap_bulk_read(regmap, reg, regs, 2); |
| if (err) |
| return err; |
| |
| regval = (regs[1] << 8) | regs[0]; |
| *val = regval ? 6000000 / regval : 0; |
| |
| return 0; |
| } |
| |
| static int amc6821_fan_read(struct device *dev, u32 attr, long *val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| u32 regval; |
| int err; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| case hwmon_fan_min: |
| case hwmon_fan_max: |
| case hwmon_fan_target: |
| return amc6821_fan_read_rpm(regmap, attr, val); |
| case hwmon_fan_fault: |
| return amc6821_read_alarms(regmap, hwmon_fan, attr, 0, val); |
| case hwmon_fan_pulses: |
| err = regmap_read(regmap, AMC6821_REG_CONF4, ®val); |
| if (err) |
| return err; |
| *val = (regval & AMC6821_CONF4_PSPR) ? 4 : 2; |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int amc6821_fan_write(struct device *dev, u32 attr, long val) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| u8 regs[2]; |
| int reg; |
| |
| if (attr == hwmon_fan_pulses) { |
| if (val != 2 && val != 4) |
| return -EINVAL; |
| return regmap_update_bits(regmap, AMC6821_REG_CONF4, |
| AMC6821_CONF4_PSPR, |
| val == 4 ? AMC6821_CONF4_PSPR : 0); |
| } |
| |
| if (val < 0) |
| return -EINVAL; |
| |
| switch (attr) { |
| case hwmon_fan_min: |
| if (!val) /* no unlimited minimum speed */ |
| return -EINVAL; |
| reg = AMC6821_REG_TACH_LLIMITL; |
| break; |
| case hwmon_fan_max: |
| reg = AMC6821_REG_TACH_HLIMITL; |
| break; |
| case hwmon_fan_target: |
| if (!val) /* no unlimited target speed */ |
| return -EINVAL; |
| reg = AMC6821_REG_TACH_SETTINGL; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| val = val ? 6000000 / clamp_val(val, 1, 6000000) : 0; |
| val = clamp_val(val, 0, 0xffff); |
| |
| regs[0] = val & 0xff; |
| regs[1] = val >> 8; |
| |
| return regmap_bulk_write(data->regmap, reg, regs, 2); |
| } |
| |
| static ssize_t temp_auto_point_temp_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| int ix = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| u8 temps[3]; |
| int err; |
| |
| mutex_lock(&data->update_lock); |
| err = amc6821_get_auto_point_temps(data->regmap, nr, temps); |
| mutex_unlock(&data->update_lock); |
| if (err) |
| return err; |
| |
| return sysfs_emit(buf, "%d\n", temps[ix] * 1000); |
| } |
| |
| static ssize_t pwm1_auto_point_pwm_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| int ix = to_sensor_dev_attr(devattr)->index; |
| u32 val; |
| int err; |
| |
| switch (ix) { |
| case 0: |
| val = 0; |
| break; |
| case 1: |
| err = regmap_read(data->regmap, AMC6821_REG_DCY_LOW_TEMP, &val); |
| if (err) |
| return err; |
| break; |
| default: |
| val = 255; |
| break; |
| } |
| return sysfs_emit(buf, "%d\n", val); |
| } |
| |
| /* |
| * Set TEMP[0-4] (low temperature) and SLP[0-2] (slope) of local or remote |
| * TEMP-FAN control register. |
| * |
| * Return 0 on success or negative error code. |
| * |
| * Channel 0: local, channel 1: remote |
| */ |
| static inline int set_slope_register(struct regmap *regmap, int channel, u8 *temps) |
| { |
| u8 regval = FIELD_PREP(AMC6821_TEMP_LIMIT_MASK, temps[1] / 4); |
| u8 tmp, dpwm; |
| int err, dt; |
| u32 pwm; |
| |
| err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm); |
| if (err) |
| return err; |
| |
| dpwm = 255 - pwm; |
| |
| dt = temps[2] - temps[1]; |
| for (tmp = 4; tmp > 0; tmp--) { |
| if (dt * (32 >> tmp) >= dpwm) |
| break; |
| } |
| regval |= FIELD_PREP(AMC6821_TEMP_SLOPE_MASK, tmp); |
| |
| return regmap_write(regmap, |
| channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL, |
| regval); |
| } |
| |
| static ssize_t temp_auto_point_temp_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| int ix = to_sensor_dev_attr_2(attr)->index; |
| int nr = to_sensor_dev_attr_2(attr)->nr; |
| struct regmap *regmap = data->regmap; |
| u8 temps[3], otemps[3]; |
| long val; |
| int ret; |
| |
| ret = kstrtol(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->update_lock); |
| |
| ret = amc6821_get_auto_point_temps(data->regmap, nr, temps); |
| if (ret) |
| goto unlock; |
| |
| switch (ix) { |
| case 0: |
| /* |
| * Passive cooling temperature. Range limit against low limit |
| * of both channels. |
| */ |
| ret = amc6821_get_auto_point_temps(data->regmap, 1 - nr, otemps); |
| if (ret) |
| goto unlock; |
| val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 63000), 1000); |
| val = clamp_val(val, 0, min(temps[1], otemps[1])); |
| ret = regmap_write(regmap, AMC6821_REG_PSV_TEMP, val); |
| break; |
| case 1: |
| /* |
| * Low limit; must be between passive and high limit, |
| * and not exceed 124. Step size is 4 degrees C. |
| */ |
| val = clamp_val(val, DIV_ROUND_UP(temps[0], 4) * 4000, 124000); |
| temps[1] = DIV_ROUND_CLOSEST(val, 4000) * 4; |
| val = temps[1] / 4; |
| /* Auto-adjust high limit if necessary */ |
| temps[2] = clamp_val(temps[2], temps[1] + 1, 255); |
| ret = set_slope_register(regmap, nr, temps); |
| break; |
| case 2: |
| /* high limit, must be higher than low limit */ |
| val = clamp_val(val, (temps[1] + 1) * 1000, 255000); |
| temps[2] = DIV_ROUND_CLOSEST(val, 1000); |
| ret = set_slope_register(regmap, nr, temps); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| unlock: |
| mutex_unlock(&data->update_lock); |
| return ret ? : count; |
| } |
| |
| static ssize_t pwm1_auto_point_pwm_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct amc6821_data *data = dev_get_drvdata(dev); |
| struct regmap *regmap = data->regmap; |
| int i, ret; |
| u8 val; |
| |
| ret = kstrtou8(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&data->update_lock); |
| ret = regmap_write(regmap, AMC6821_REG_DCY_LOW_TEMP, val); |
| if (ret) |
| goto unlock; |
| |
| for (i = 0; i < 2; i++) { |
| u8 temps[3]; |
| |
| ret = amc6821_get_auto_point_temps(regmap, i, temps); |
| if (ret) |
| break; |
| ret = set_slope_register(regmap, i, temps); |
| if (ret) |
| break; |
| } |
| unlock: |
| mutex_unlock(&data->update_lock); |
| return ret ? : count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm1_auto_point_pwm, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm1_auto_point_pwm, 1); |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm1_auto_point_pwm, 2); |
| static SENSOR_DEVICE_ATTR_2_RO(temp1_auto_point1_temp, temp_auto_point_temp, |
| 0, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point2_temp, temp_auto_point_temp, |
| 0, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point3_temp, temp_auto_point_temp, |
| 0, 2); |
| |
| static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point1_temp, temp_auto_point_temp, |
| 1, 0); |
| static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point2_temp, temp_auto_point_temp, |
| 1, 1); |
| static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point3_temp, temp_auto_point_temp, |
| 1, 2); |
| |
| static struct attribute *amc6821_attrs[] = { |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, |
| &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(amc6821); |
| |
| static int amc6821_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| switch (type) { |
| case hwmon_temp: |
| return amc6821_temp_read(dev, attr, channel, val); |
| case hwmon_fan: |
| return amc6821_fan_read(dev, attr, val); |
| case hwmon_pwm: |
| return amc6821_pwm_read(dev, attr, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int amc6821_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| switch (type) { |
| case hwmon_temp: |
| return amc6821_temp_write(dev, attr, channel, val); |
| case hwmon_fan: |
| return amc6821_fan_write(dev, attr, val); |
| case hwmon_pwm: |
| return amc6821_pwm_write(dev, attr, val); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static umode_t amc6821_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_input: |
| case hwmon_temp_min_alarm: |
| case hwmon_temp_max_alarm: |
| case hwmon_temp_crit_alarm: |
| case hwmon_temp_fault: |
| return 0444; |
| case hwmon_temp_min: |
| case hwmon_temp_max: |
| case hwmon_temp_crit: |
| return 0644; |
| default: |
| return 0; |
| } |
| case hwmon_fan: |
| switch (attr) { |
| case hwmon_fan_input: |
| case hwmon_fan_fault: |
| return 0444; |
| case hwmon_fan_pulses: |
| case hwmon_fan_min: |
| case hwmon_fan_max: |
| case hwmon_fan_target: |
| return 0644; |
| default: |
| return 0; |
| } |
| case hwmon_pwm: |
| switch (attr) { |
| case hwmon_pwm_mode: |
| case hwmon_pwm_enable: |
| case hwmon_pwm_input: |
| return 0644; |
| case hwmon_pwm_auto_channels_temp: |
| return 0444; |
| default: |
| return 0; |
| } |
| default: |
| return 0; |
| } |
| } |
| |
| static const struct hwmon_channel_info * const amc6821_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_CRIT | HWMON_T_MIN_ALARM | |
| HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM, |
| HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | |
| HWMON_T_CRIT | HWMON_T_MIN_ALARM | |
| HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | |
| HWMON_T_FAULT), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX | |
| HWMON_F_TARGET | HWMON_F_PULSES | HWMON_F_FAULT), |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE | |
| HWMON_PWM_AUTO_CHANNELS_TEMP), |
| NULL |
| }; |
| |
| static const struct hwmon_ops amc6821_hwmon_ops = { |
| .is_visible = amc6821_is_visible, |
| .read = amc6821_read, |
| .write = amc6821_write, |
| }; |
| |
| static const struct hwmon_chip_info amc6821_chip_info = { |
| .ops = &amc6821_hwmon_ops, |
| .info = amc6821_info, |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int amc6821_detect(struct i2c_client *client, struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int address = client->addr; |
| int dev_id, comp_id; |
| |
| dev_dbg(&adapter->dev, "amc6821_detect called.\n"); |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| dev_dbg(&adapter->dev, |
| "amc6821: I2C bus doesn't support byte mode, " |
| "skipping.\n"); |
| return -ENODEV; |
| } |
| |
| dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID); |
| comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID); |
| if (dev_id != 0x21 || comp_id != 0x49) { |
| dev_dbg(&adapter->dev, |
| "amc6821: detection failed at 0x%02x.\n", |
| address); |
| return -ENODEV; |
| } |
| |
| /* |
| * Bit 7 of the address register is ignored, so we can check the |
| * ID registers again |
| */ |
| dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID); |
| comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID); |
| if (dev_id != 0x21 || comp_id != 0x49) { |
| dev_dbg(&adapter->dev, |
| "amc6821: detection failed at 0x%02x.\n", |
| address); |
| return -ENODEV; |
| } |
| |
| dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address); |
| strscpy(info->type, "amc6821", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int amc6821_init_client(struct amc6821_data *data) |
| { |
| struct regmap *regmap = data->regmap; |
| int err; |
| |
| if (init) { |
| err = regmap_set_bits(regmap, AMC6821_REG_CONF4, AMC6821_CONF4_MODE); |
| if (err) |
| return err; |
| err = regmap_clear_bits(regmap, AMC6821_REG_CONF3, AMC6821_CONF3_THERM_FAN_EN); |
| if (err) |
| return err; |
| err = regmap_clear_bits(regmap, AMC6821_REG_CONF2, |
| AMC6821_CONF2_RTFIE | |
| AMC6821_CONF2_LTOIE | |
| AMC6821_CONF2_RTOIE); |
| if (err) |
| return err; |
| |
| err = regmap_update_bits(regmap, AMC6821_REG_CONF1, |
| AMC6821_CONF1_THERMOVIE | AMC6821_CONF1_FANIE | |
| AMC6821_CONF1_START | AMC6821_CONF1_PWMINV, |
| AMC6821_CONF1_START | |
| (pwminv ? AMC6821_CONF1_PWMINV : 0)); |
| if (err) |
| return err; |
| } |
| return 0; |
| } |
| |
| static bool amc6821_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case AMC6821_REG_STAT1: |
| case AMC6821_REG_STAT2: |
| case AMC6821_REG_TEMP_LO: |
| case AMC6821_REG_TDATA_LOW: |
| case AMC6821_REG_LTEMP_HI: |
| case AMC6821_REG_RTEMP_HI: |
| case AMC6821_REG_TDATA_HI: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config amc6821_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .volatile_reg = amc6821_volatile_reg, |
| .cache_type = REGCACHE_MAPLE, |
| }; |
| |
| static int amc6821_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct amc6821_data *data; |
| struct device *hwmon_dev; |
| struct regmap *regmap; |
| int err; |
| |
| data = devm_kzalloc(dev, sizeof(struct amc6821_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| regmap = devm_regmap_init_i2c(client, &amc6821_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(dev, PTR_ERR(regmap), |
| "Failed to initialize regmap\n"); |
| data->regmap = regmap; |
| |
| err = amc6821_init_client(data); |
| if (err) |
| return err; |
| |
| if (of_device_is_compatible(dev->of_node, "tsd,mule")) { |
| err = devm_of_platform_populate(dev); |
| if (err) |
| return dev_err_probe(dev, err, |
| "Failed to create sub-devices\n"); |
| } |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, |
| data, &amc6821_chip_info, |
| amc6821_groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id amc6821_id[] = { |
| { "amc6821" }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, amc6821_id); |
| |
| static const struct of_device_id __maybe_unused amc6821_of_match[] = { |
| { |
| .compatible = "ti,amc6821", |
| }, |
| { |
| .compatible = "tsd,mule", |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, amc6821_of_match); |
| |
| static struct i2c_driver amc6821_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "amc6821", |
| .of_match_table = of_match_ptr(amc6821_of_match), |
| }, |
| .probe = amc6821_probe, |
| .id_table = amc6821_id, |
| .detect = amc6821_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(amc6821_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>"); |
| MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver"); |