| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Intel MAX 10 BMC HWMON Driver |
| * |
| * Copyright (C) 2018-2020 Intel Corporation. All rights reserved. |
| * |
| */ |
| #include <linux/device.h> |
| #include <linux/hwmon.h> |
| #include <linux/mfd/intel-m10-bmc.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| |
| struct m10bmc_sdata { |
| unsigned int reg_input; |
| unsigned int reg_max; |
| unsigned int reg_crit; |
| unsigned int reg_hyst; |
| unsigned int reg_min; |
| unsigned int multiplier; |
| const char *label; |
| }; |
| |
| struct m10bmc_hwmon_board_data { |
| const struct m10bmc_sdata *tables[hwmon_max]; |
| const struct hwmon_channel_info * const *hinfo; |
| }; |
| |
| struct m10bmc_hwmon { |
| struct device *dev; |
| struct hwmon_chip_info chip; |
| char *hw_name; |
| struct intel_m10bmc *m10bmc; |
| const struct m10bmc_hwmon_board_data *bdata; |
| }; |
| |
| static const struct m10bmc_sdata n3000bmc_temp_tbl[] = { |
| { 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Temperature" }, |
| { 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Die Temperature" }, |
| { 0x11c, 0x124, 0x120, 0x0, 0x0, 500, "QSFP0 Temperature" }, |
| { 0x12c, 0x134, 0x130, 0x0, 0x0, 500, "QSFP1 Temperature" }, |
| { 0x168, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A Temperature" }, |
| { 0x16c, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A SerDes Temperature" }, |
| { 0x170, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B Temperature" }, |
| { 0x174, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B SerDes Temperature" }, |
| }; |
| |
| static const struct m10bmc_sdata n3000bmc_in_tbl[] = { |
| { 0x128, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" }, |
| { 0x138, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" }, |
| { 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage" }, |
| { 0x144, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Voltage" }, |
| { 0x14c, 0x0, 0x0, 0x0, 0x0, 1, "1.2V Voltage" }, |
| { 0x150, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Voltage" }, |
| { 0x158, 0x0, 0x0, 0x0, 0x0, 1, "1.8V Voltage" }, |
| { 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "3.3V Voltage" }, |
| }; |
| |
| static const struct m10bmc_sdata n3000bmc_curr_tbl[] = { |
| { 0x140, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Current" }, |
| { 0x148, 0x0, 0x0, 0x0, 0x0, 1, "12V Backplane Current" }, |
| { 0x154, 0x0, 0x0, 0x0, 0x0, 1, "12V AUX Current" }, |
| }; |
| |
| static const struct m10bmc_sdata n3000bmc_power_tbl[] = { |
| { 0x160, 0x0, 0x0, 0x0, 0x0, 1000, "Board Power" }, |
| }; |
| |
| static const struct hwmon_channel_info * const n3000bmc_hinfo[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL), |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL), |
| HWMON_CHANNEL_INFO(power, |
| HWMON_P_INPUT | HWMON_P_LABEL), |
| NULL |
| }; |
| |
| static const struct m10bmc_sdata d5005bmc_temp_tbl[] = { |
| { 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Inlet Air Temperature" }, |
| { 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Core Temperature" }, |
| { 0x11c, 0x120, 0x124, 0x128, 0x0, 500, "Board Exhaust Air Temperature" }, |
| { 0x12c, 0x130, 0x134, 0x0, 0x0, 500, "FPGA Transceiver Temperature" }, |
| { 0x138, 0x13c, 0x140, 0x144, 0x0, 500, "RDIMM0 Temperature" }, |
| { 0x148, 0x14c, 0x150, 0x154, 0x0, 500, "RDIMM1 Temperature" }, |
| { 0x158, 0x15c, 0x160, 0x164, 0x0, 500, "RDIMM2 Temperature" }, |
| { 0x168, 0x16c, 0x170, 0x174, 0x0, 500, "RDIMM3 Temperature" }, |
| { 0x178, 0x17c, 0x180, 0x0, 0x0, 500, "QSFP0 Temperature" }, |
| { 0x188, 0x18c, 0x190, 0x0, 0x0, 500, "QSFP1 Temperature" }, |
| { 0x1a0, 0x1a4, 0x1a8, 0x0, 0x0, 500, "3.3v Temperature" }, |
| { 0x1bc, 0x1c0, 0x1c4, 0x0, 0x0, 500, "VCCERAM Temperature" }, |
| { 0x1d8, 0x1dc, 0x1e0, 0x0, 0x0, 500, "VCCR Temperature" }, |
| { 0x1f4, 0x1f8, 0x1fc, 0x0, 0x0, 500, "VCCT Temperature" }, |
| { 0x210, 0x214, 0x218, 0x0, 0x0, 500, "1.8v Temperature" }, |
| { 0x22c, 0x230, 0x234, 0x0, 0x0, 500, "12v Backplane Temperature" }, |
| { 0x248, 0x24c, 0x250, 0x0, 0x0, 500, "12v AUX Temperature" }, |
| }; |
| |
| static const struct m10bmc_sdata d5005bmc_in_tbl[] = { |
| { 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" }, |
| { 0x194, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" }, |
| { 0x198, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage" }, |
| { 0x1ac, 0x1b0, 0x1b4, 0x0, 0x0, 1, "3.3v Voltage" }, |
| { 0x1c8, 0x1cc, 0x1d0, 0x0, 0x0, 1, "VCCERAM Voltage" }, |
| { 0x1e4, 0x1e8, 0x1ec, 0x0, 0x0, 1, "VCCR Voltage" }, |
| { 0x200, 0x204, 0x208, 0x0, 0x0, 1, "VCCT Voltage" }, |
| { 0x21c, 0x220, 0x224, 0x0, 0x0, 1, "1.8v Voltage" }, |
| { 0x238, 0x0, 0x0, 0x0, 0x23c, 1, "12v Backplane Voltage" }, |
| { 0x254, 0x0, 0x0, 0x0, 0x258, 1, "12v AUX Voltage" }, |
| }; |
| |
| static const struct m10bmc_sdata d5005bmc_curr_tbl[] = { |
| { 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Current" }, |
| { 0x1b8, 0x0, 0x0, 0x0, 0x0, 1, "3.3v Current" }, |
| { 0x1d4, 0x0, 0x0, 0x0, 0x0, 1, "VCCERAM Current" }, |
| { 0x1f0, 0x0, 0x0, 0x0, 0x0, 1, "VCCR Current" }, |
| { 0x20c, 0x0, 0x0, 0x0, 0x0, 1, "VCCT Current" }, |
| { 0x228, 0x0, 0x0, 0x0, 0x0, 1, "1.8v Current" }, |
| { 0x240, 0x244, 0x0, 0x0, 0x0, 1, "12v Backplane Current" }, |
| { 0x25c, 0x260, 0x0, 0x0, 0x0, 1, "12v AUX Current" }, |
| }; |
| |
| static const struct m10bmc_hwmon_board_data n3000bmc_hwmon_bdata = { |
| .tables = { |
| [hwmon_temp] = n3000bmc_temp_tbl, |
| [hwmon_in] = n3000bmc_in_tbl, |
| [hwmon_curr] = n3000bmc_curr_tbl, |
| [hwmon_power] = n3000bmc_power_tbl, |
| }, |
| |
| .hinfo = n3000bmc_hinfo, |
| }; |
| |
| static const struct hwmon_channel_info * const d5005bmc_hinfo[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL), |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT | |
| HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT | |
| HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT | |
| HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT | |
| HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT | |
| HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_LABEL), |
| NULL |
| }; |
| |
| static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = { |
| .tables = { |
| [hwmon_temp] = d5005bmc_temp_tbl, |
| [hwmon_in] = d5005bmc_in_tbl, |
| [hwmon_curr] = d5005bmc_curr_tbl, |
| }, |
| |
| .hinfo = d5005bmc_hinfo, |
| }; |
| |
| static const struct m10bmc_sdata n5010bmc_temp_tbl[] = { |
| { 0x100, 0x0, 0x104, 0x0, 0x0, 1000, "Board Local Temperature" }, |
| { 0x108, 0x0, 0x10c, 0x0, 0x0, 1000, "FPGA 1 Temperature" }, |
| { 0x110, 0x0, 0x114, 0x0, 0x0, 1000, "FPGA 2 Temperature" }, |
| { 0x118, 0x0, 0x0, 0x0, 0x0, 1000, "Card Top Temperature" }, |
| { 0x11c, 0x0, 0x0, 0x0, 0x0, 1000, "Card Bottom Temperature" }, |
| { 0x128, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 1.2V Temperature" }, |
| { 0x134, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 5V Temperature" }, |
| { 0x140, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.9V Temperature" }, |
| { 0x14c, 0x0, 0x0, 0x0, 0x0, 1000, "FPGA 0.85V Temperature" }, |
| { 0x158, 0x0, 0x0, 0x0, 0x0, 1000, "AUX 12V Temperature" }, |
| { 0x164, 0x0, 0x0, 0x0, 0x0, 1000, "Backplane 12V Temperature" }, |
| { 0x1a8, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-1 Temperature" }, |
| { 0x1ac, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-2 Temperature" }, |
| { 0x1b0, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-3 Temperature" }, |
| { 0x1b4, 0x0, 0x0, 0x0, 0x0, 1000, "QSFP28-4 Temperature" }, |
| { 0x1b8, 0x0, 0x0, 0x0, 0x0, 1000, "CVL1 Internal Temperature" }, |
| { 0x1bc, 0x0, 0x0, 0x0, 0x0, 1000, "CVL2 Internal Temperature" }, |
| }; |
| |
| static const struct m10bmc_sdata n5010bmc_in_tbl[] = { |
| { 0x120, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Voltage" }, |
| { 0x12c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Voltage" }, |
| { 0x138, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Voltage" }, |
| { 0x144, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Voltage" }, |
| { 0x150, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Voltage" }, |
| { 0x15c, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Voltage" }, |
| { 0x16c, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Voltage" }, |
| { 0x17c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Voltage" }, |
| { 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Voltage" }, |
| { 0x18c, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Voltage" }, |
| { 0x194, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Voltage" }, |
| { 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Voltage" }, |
| { 0x1a4, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Voltage" }, |
| }; |
| |
| static const struct m10bmc_sdata n5010bmc_curr_tbl[] = { |
| { 0x124, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.2V Current" }, |
| { 0x130, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 5V Current" }, |
| { 0x13c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.9V Current" }, |
| { 0x148, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 0.85V Current" }, |
| { 0x154, 0x0, 0x0, 0x0, 0x0, 1, "AUX 12V Current" }, |
| { 0x160, 0x0, 0x0, 0x0, 0x0, 1, "Backplane 12V Current" }, |
| { 0x168, 0x0, 0x0, 0x0, 0x0, 1, "DDR4 1.2V Current" }, |
| { 0x178, 0x0, 0x0, 0x0, 0x0, 1, "FPGA 1.8V Current" }, |
| { 0x180, 0x0, 0x0, 0x0, 0x0, 1, "QDR 1.3V Current" }, |
| { 0x188, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 0.8V Current" }, |
| { 0x190, 0x0, 0x0, 0x0, 0x0, 1, "CVL1 1.05V Current" }, |
| { 0x198, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 1.05V Current" }, |
| { 0x1a0, 0x0, 0x0, 0x0, 0x0, 1, "CVL2 0.8V Current" }, |
| }; |
| |
| static const struct hwmon_channel_info * const n5010bmc_hinfo[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL), |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL), |
| NULL |
| }; |
| |
| static const struct m10bmc_hwmon_board_data n5010bmc_hwmon_bdata = { |
| .tables = { |
| [hwmon_temp] = n5010bmc_temp_tbl, |
| [hwmon_in] = n5010bmc_in_tbl, |
| [hwmon_curr] = n5010bmc_curr_tbl, |
| }, |
| |
| .hinfo = n5010bmc_hinfo, |
| }; |
| |
| static const struct m10bmc_sdata n6000bmc_temp_tbl[] = { |
| { 0x444, 0x448, 0x44c, 0x0, 0x0, 500, "FPGA E-TILE Temperature #1" }, |
| { 0x450, 0x454, 0x458, 0x0, 0x0, 500, "FPGA E-TILE Temperature #2" }, |
| { 0x45c, 0x460, 0x464, 0x0, 0x0, 500, "FPGA E-TILE Temperature #3" }, |
| { 0x468, 0x46c, 0x470, 0x0, 0x0, 500, "FPGA E-TILE Temperature #4" }, |
| { 0x474, 0x478, 0x47c, 0x0, 0x0, 500, "FPGA P-TILE Temperature" }, |
| { 0x484, 0x488, 0x48c, 0x0, 0x0, 500, "FPGA FABRIC Digital Temperature #1" }, |
| { 0x490, 0x494, 0x498, 0x0, 0x0, 500, "FPGA FABRIC Digital Temperature #2" }, |
| { 0x49c, 0x4a0, 0x4a4, 0x0, 0x0, 500, "FPGA FABRIC Digital Temperature #3" }, |
| { 0x4a8, 0x4ac, 0x4b0, 0x0, 0x0, 500, "FPGA FABRIC Digital Temperature #4" }, |
| { 0x4b4, 0x4b8, 0x4bc, 0x0, 0x0, 500, "FPGA FABRIC Digital Temperature #5" }, |
| { 0x4c0, 0x4c4, 0x4c8, 0x0, 0x0, 500, "FPGA FABRIC Remote Digital Temperature #1" }, |
| { 0x4cc, 0x4d0, 0x4d4, 0x0, 0x0, 500, "FPGA FABRIC Remote Digital Temperature #2" }, |
| { 0x4d8, 0x4dc, 0x4e0, 0x0, 0x0, 500, "FPGA FABRIC Remote Digital Temperature #3" }, |
| { 0x4e4, 0x4e8, 0x4ec, 0x0, 0x0, 500, "FPGA FABRIC Remote Digital Temperature #4" }, |
| { 0x4f0, 0x4f4, 0x4f8, 0x52c, 0x0, 500, "Board Top Near FPGA Temperature" }, |
| { 0x4fc, 0x500, 0x504, 0x52c, 0x0, 500, "Board Bottom Near CVL Temperature" }, |
| { 0x508, 0x50c, 0x510, 0x52c, 0x0, 500, "Board Top East Near VRs Temperature" }, |
| { 0x514, 0x518, 0x51c, 0x52c, 0x0, 500, "CVL Die Temperature" }, |
| { 0x520, 0x524, 0x528, 0x52c, 0x0, 500, "Board Rear Side Temperature" }, |
| { 0x530, 0x534, 0x538, 0x52c, 0x0, 500, "Board Front Side Temperature" }, |
| { 0x53c, 0x540, 0x544, 0x0, 0x0, 500, "QSFP1 Case Temperature" }, |
| { 0x548, 0x54c, 0x550, 0x0, 0x0, 500, "QSFP2 Case Temperature" }, |
| { 0x554, 0x0, 0x0, 0x0, 0x0, 500, "FPGA Core Voltage Phase 0 VR Temperature" }, |
| { 0x560, 0x0, 0x0, 0x0, 0x0, 500, "FPGA Core Voltage Phase 1 VR Temperature" }, |
| { 0x56c, 0x0, 0x0, 0x0, 0x0, 500, "FPGA Core Voltage Phase 2 VR Temperature" }, |
| { 0x578, 0x0, 0x0, 0x0, 0x0, 500, "FPGA Core Voltage VR Controller Temperature" }, |
| { 0x584, 0x0, 0x0, 0x0, 0x0, 500, "FPGA VCCH VR Temperature" }, |
| { 0x590, 0x0, 0x0, 0x0, 0x0, 500, "FPGA VCC_1V2 VR Temperature" }, |
| { 0x59c, 0x0, 0x0, 0x0, 0x0, 500, "FPGA VCCH, VCC_1V2 VR Controller Temperature" }, |
| { 0x5a8, 0x0, 0x0, 0x0, 0x0, 500, "3V3 VR Temperature" }, |
| { 0x5b4, 0x0, 0x0, 0x0, 0x0, 500, "CVL Core Voltage VR Temperature" }, |
| { 0x5c4, 0x5c8, 0x5cc, 0x5c0, 0x0, 500, "FPGA P-Tile Temperature [Remote]" }, |
| { 0x5d0, 0x5d4, 0x5d8, 0x5c0, 0x0, 500, "FPGA E-Tile Temperature [Remote]" }, |
| { 0x5dc, 0x5e0, 0x5e4, 0x5c0, 0x0, 500, "FPGA SDM Temperature [Remote]" }, |
| { 0x5e8, 0x5ec, 0x5f0, 0x5c0, 0x0, 500, "FPGA Corner Temperature [Remote]" }, |
| }; |
| |
| static const struct m10bmc_sdata n6000bmc_in_tbl[] = { |
| { 0x5f4, 0x0, 0x0, 0x0, 0x0, 1, "Inlet 12V PCIe Rail Voltage" }, |
| { 0x60c, 0x0, 0x0, 0x0, 0x0, 1, "Inlet 12V Aux Rail Voltage" }, |
| { 0x624, 0x0, 0x0, 0x0, 0x0, 1, "Inlet 3V3 PCIe Rail Voltage" }, |
| { 0x63c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage Rail Voltage" }, |
| { 0x644, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCCH Rail Voltage" }, |
| { 0x64c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCC_1V2 Rail Voltage" }, |
| { 0x654, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCCH_GXER_1V1, VCCA_1V8 Voltage" }, |
| { 0x664, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCCIO_1V2 Voltage" }, |
| { 0x674, 0x0, 0x0, 0x0, 0x0, 1, "CVL Non Core Rails Inlet Voltage" }, |
| { 0x684, 0x0, 0x0, 0x0, 0x0, 1, "MAX10 & Board CLK PWR 3V3 Inlet Voltage" }, |
| { 0x694, 0x0, 0x0, 0x0, 0x0, 1, "CVL Core Voltage Rail Voltage" }, |
| { 0x6ac, 0x0, 0x0, 0x0, 0x0, 1, "Board 3V3 VR Voltage" }, |
| { 0x6b4, 0x0, 0x0, 0x0, 0x0, 1, "QSFP 3V3 Rail Voltage" }, |
| { 0x6c4, 0x0, 0x0, 0x0, 0x0, 1, "QSFP (Primary) Supply Rail Voltage" }, |
| { 0x6c8, 0x0, 0x0, 0x0, 0x0, 1, "QSFP (Secondary) Supply Rail Voltage" }, |
| { 0x6cc, 0x0, 0x0, 0x0, 0x0, 1, "VCCCLK_GXER_2V5 Voltage" }, |
| { 0x6d0, 0x0, 0x0, 0x0, 0x0, 1, "AVDDH_1V1_CVL Voltage" }, |
| { 0x6d4, 0x0, 0x0, 0x0, 0x0, 1, "VDDH_1V8_CVL Voltage" }, |
| { 0x6d8, 0x0, 0x0, 0x0, 0x0, 1, "VCCA_PLL Voltage" }, |
| { 0x6e0, 0x0, 0x0, 0x0, 0x0, 1, "VCCRT_GXER_0V9 Voltage" }, |
| { 0x6e8, 0x0, 0x0, 0x0, 0x0, 1, "VCCRT_GXPL_0V9 Voltage" }, |
| { 0x6f0, 0x0, 0x0, 0x0, 0x0, 1, "VCCH_GXPL_1V8 Voltage" }, |
| { 0x6f4, 0x0, 0x0, 0x0, 0x0, 1, "VCCPT_1V8 Voltage" }, |
| { 0x6fc, 0x0, 0x0, 0x0, 0x0, 1, "VCC_3V3_M10 Voltage" }, |
| { 0x700, 0x0, 0x0, 0x0, 0x0, 1, "VCC_1V8_M10 Voltage" }, |
| { 0x704, 0x0, 0x0, 0x0, 0x0, 1, "VCC_1V2_EMIF1_2_3 Voltage" }, |
| { 0x70c, 0x0, 0x0, 0x0, 0x0, 1, "VCC_1V2_EMIF4_5 Voltage" }, |
| { 0x714, 0x0, 0x0, 0x0, 0x0, 1, "VCCA_1V8 Voltage" }, |
| { 0x718, 0x0, 0x0, 0x0, 0x0, 1, "VCCH_GXER_1V1 Voltage" }, |
| { 0x71c, 0x0, 0x0, 0x0, 0x0, 1, "AVDD_ETH_0V9_CVL Voltage" }, |
| { 0x720, 0x0, 0x0, 0x0, 0x0, 1, "AVDD_PCIE_0V9_CVL Voltage" }, |
| }; |
| |
| static const struct m10bmc_sdata n6000bmc_curr_tbl[] = { |
| { 0x600, 0x604, 0x608, 0x0, 0x0, 1, "Inlet 12V PCIe Rail Current" }, |
| { 0x618, 0x61c, 0x620, 0x0, 0x0, 1, "Inlet 12V Aux Rail Current" }, |
| { 0x630, 0x634, 0x638, 0x0, 0x0, 1, "Inlet 3V3 PCIe Rail Current" }, |
| { 0x640, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage Rail Current" }, |
| { 0x648, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCCH Rail Current" }, |
| { 0x650, 0x0, 0x0, 0x0, 0x0, 1, "FPGA VCC_1V2 Rail Current" }, |
| { 0x658, 0x65c, 0x660, 0x0, 0x0, 1, "FPGA VCCH_GXER_1V1, VCCA_1V8 Current" }, |
| { 0x668, 0x66c, 0x670, 0x0, 0x0, 1, "FPGA VCCIO_1V2 Current" }, |
| { 0x678, 0x67c, 0x680, 0x0, 0x0, 1, "CVL Non Core Rails Inlet Current" }, |
| { 0x688, 0x68c, 0x690, 0x0, 0x0, 1, "MAX10 & Board CLK PWR 3V3 Inlet Current" }, |
| { 0x698, 0x0, 0x0, 0x0, 0x0, 1, "CVL Core Voltage Rail Current" }, |
| { 0x6b0, 0x0, 0x0, 0x0, 0x0, 1, "Board 3V3 VR Current" }, |
| { 0x6b8, 0x6bc, 0x6c0, 0x0, 0x0, 1, "QSFP 3V3 Rail Current" }, |
| }; |
| |
| static const struct m10bmc_sdata n6000bmc_power_tbl[] = { |
| { 0x724, 0x0, 0x0, 0x0, 0x0, 1000, "Board Power" }, |
| }; |
| |
| static const struct hwmon_channel_info * const n6000bmc_hinfo[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | |
| HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL, |
| HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | |
| HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL), |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL, |
| HWMON_I_INPUT | HWMON_I_LABEL), |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_LABEL, |
| HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_CRIT | |
| HWMON_C_LABEL), |
| HWMON_CHANNEL_INFO(power, |
| HWMON_P_INPUT | HWMON_P_LABEL), |
| NULL |
| }; |
| |
| static const struct m10bmc_hwmon_board_data n6000bmc_hwmon_bdata = { |
| .tables = { |
| [hwmon_temp] = n6000bmc_temp_tbl, |
| [hwmon_in] = n6000bmc_in_tbl, |
| [hwmon_curr] = n6000bmc_curr_tbl, |
| [hwmon_power] = n6000bmc_power_tbl, |
| }, |
| |
| .hinfo = n6000bmc_hinfo, |
| }; |
| |
| static const struct m10bmc_sdata * |
| find_sensor_data(struct m10bmc_hwmon *hw, enum hwmon_sensor_types type, |
| int channel) |
| { |
| const struct m10bmc_sdata *tbl; |
| |
| tbl = hw->bdata->tables[type]; |
| if (!tbl) |
| return ERR_PTR(-EOPNOTSUPP); |
| |
| return &tbl[channel]; |
| } |
| |
| static int do_sensor_read(struct m10bmc_hwmon *hw, |
| const struct m10bmc_sdata *data, |
| unsigned int regoff, long *val) |
| { |
| unsigned int regval; |
| int ret; |
| |
| ret = m10bmc_sys_read(hw->m10bmc, regoff, ®val); |
| if (ret) |
| return ret; |
| |
| /* |
| * BMC Firmware will return 0xdeadbeef if the sensor value is invalid |
| * at that time. This usually happens on sensor channels which connect |
| * to external pluggable modules, e.g. QSFP temperature and voltage. |
| * When the QSFP is unplugged from cage, driver will get 0xdeadbeef |
| * from their registers. |
| */ |
| if (regval == 0xdeadbeef) |
| return -ENODATA; |
| |
| *val = regval * data->multiplier; |
| |
| return 0; |
| } |
| |
| static int m10bmc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| struct m10bmc_hwmon *hw = dev_get_drvdata(dev); |
| unsigned int reg = 0, reg_hyst = 0; |
| const struct m10bmc_sdata *data; |
| long hyst, value; |
| int ret; |
| |
| data = find_sensor_data(hw, type, channel); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| switch (type) { |
| case hwmon_temp: |
| switch (attr) { |
| case hwmon_temp_input: |
| reg = data->reg_input; |
| break; |
| case hwmon_temp_max_hyst: |
| reg_hyst = data->reg_hyst; |
| fallthrough; |
| case hwmon_temp_max: |
| reg = data->reg_max; |
| break; |
| case hwmon_temp_crit_hyst: |
| reg_hyst = data->reg_hyst; |
| fallthrough; |
| case hwmon_temp_crit: |
| reg = data->reg_crit; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| case hwmon_in: |
| switch (attr) { |
| case hwmon_in_input: |
| reg = data->reg_input; |
| break; |
| case hwmon_in_max: |
| reg = data->reg_max; |
| break; |
| case hwmon_in_crit: |
| reg = data->reg_crit; |
| break; |
| case hwmon_in_min: |
| reg = data->reg_min; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| case hwmon_curr: |
| switch (attr) { |
| case hwmon_curr_input: |
| reg = data->reg_input; |
| break; |
| case hwmon_curr_max: |
| reg = data->reg_max; |
| break; |
| case hwmon_curr_crit: |
| reg = data->reg_crit; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| case hwmon_power: |
| switch (attr) { |
| case hwmon_power_input: |
| reg = data->reg_input; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (!reg) |
| return -EOPNOTSUPP; |
| |
| ret = do_sensor_read(hw, data, reg, &value); |
| if (ret) |
| return ret; |
| |
| if (reg_hyst) { |
| ret = do_sensor_read(hw, data, reg_hyst, &hyst); |
| if (ret) |
| return ret; |
| |
| value -= hyst; |
| } |
| |
| *val = value; |
| |
| return 0; |
| } |
| |
| static int m10bmc_hwmon_read_string(struct device *dev, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel, const char **str) |
| { |
| struct m10bmc_hwmon *hw = dev_get_drvdata(dev); |
| const struct m10bmc_sdata *data; |
| |
| data = find_sensor_data(hw, type, channel); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| *str = data->label; |
| |
| return 0; |
| } |
| |
| static const struct hwmon_ops m10bmc_hwmon_ops = { |
| .visible = 0444, |
| .read = m10bmc_hwmon_read, |
| .read_string = m10bmc_hwmon_read_string, |
| }; |
| |
| static int m10bmc_hwmon_probe(struct platform_device *pdev) |
| { |
| const struct platform_device_id *id = platform_get_device_id(pdev); |
| struct intel_m10bmc *m10bmc = dev_get_drvdata(pdev->dev.parent); |
| struct device *hwmon_dev, *dev = &pdev->dev; |
| struct m10bmc_hwmon *hw; |
| |
| hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL); |
| if (!hw) |
| return -ENOMEM; |
| |
| hw->dev = dev; |
| hw->m10bmc = m10bmc; |
| hw->bdata = (const struct m10bmc_hwmon_board_data *)id->driver_data; |
| |
| hw->chip.info = hw->bdata->hinfo; |
| hw->chip.ops = &m10bmc_hwmon_ops; |
| |
| hw->hw_name = devm_hwmon_sanitize_name(dev, id->name); |
| if (IS_ERR(hw->hw_name)) |
| return PTR_ERR(hw->hw_name); |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, hw->hw_name, |
| hw, &hw->chip, NULL); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct platform_device_id intel_m10bmc_hwmon_ids[] = { |
| { |
| .name = "n3000bmc-hwmon", |
| .driver_data = (unsigned long)&n3000bmc_hwmon_bdata, |
| }, |
| { |
| .name = "d5005bmc-hwmon", |
| .driver_data = (unsigned long)&d5005bmc_hwmon_bdata, |
| }, |
| { |
| .name = "n5010bmc-hwmon", |
| .driver_data = (unsigned long)&n5010bmc_hwmon_bdata, |
| }, |
| { |
| .name = "n6000bmc-hwmon", |
| .driver_data = (unsigned long)&n6000bmc_hwmon_bdata, |
| }, |
| { } |
| }; |
| |
| static struct platform_driver intel_m10bmc_hwmon_driver = { |
| .probe = m10bmc_hwmon_probe, |
| .driver = { |
| .name = "intel-m10-bmc-hwmon", |
| }, |
| .id_table = intel_m10bmc_hwmon_ids, |
| }; |
| module_platform_driver(intel_m10bmc_hwmon_driver); |
| |
| MODULE_DEVICE_TABLE(platform, intel_m10bmc_hwmon_ids); |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_DESCRIPTION("Intel MAX 10 BMC hardware monitor"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(INTEL_M10_BMC_CORE); |
