| /* |
| tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices |
| |
| Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org> |
| |
| Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> |
| - Fixed module load/unload |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation version 2 |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/random.h> |
| #include <linux/version.h> |
| #include <linux/usb.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-ioctl.h> |
| #include <linux/interrupt.h> |
| #include <linux/kthread.h> |
| #include <linux/highmem.h> |
| #include <linux/freezer.h> |
| |
| #include "tm6000-regs.h" |
| #include "tm6000.h" |
| |
| #define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ |
| |
| /* Limits minimum and default number of buffers */ |
| #define TM6000_MIN_BUF 4 |
| #define TM6000_DEF_BUF 8 |
| |
| #define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */ |
| |
| /* Declare static vars that will be used as parameters */ |
| static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ |
| static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ |
| |
| /* Debug level */ |
| int tm6000_debug; |
| EXPORT_SYMBOL_GPL(tm6000_debug); |
| |
| /* supported controls */ |
| static struct v4l2_queryctrl tm6000_qctrl[] = { |
| { |
| .id = V4L2_CID_BRIGHTNESS, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Brightness", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 1, |
| .default_value = 54, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_CONTRAST, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Contrast", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 0x1, |
| .default_value = 119, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_SATURATION, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Saturation", |
| .minimum = 0, |
| .maximum = 255, |
| .step = 0x1, |
| .default_value = 112, |
| .flags = 0, |
| }, { |
| .id = V4L2_CID_HUE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Hue", |
| .minimum = -128, |
| .maximum = 127, |
| .step = 0x1, |
| .default_value = 0, |
| .flags = 0, |
| } |
| }; |
| |
| static int qctl_regs[ARRAY_SIZE(tm6000_qctrl)]; |
| |
| static struct tm6000_fmt format[] = { |
| { |
| .name = "4:2:2, packed, YVY2", |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .depth = 16, |
| }, { |
| .name = "4:2:2, packed, UYVY", |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .depth = 16, |
| }, { |
| .name = "A/V + VBI mux packet", |
| .fourcc = V4L2_PIX_FMT_TM6000, |
| .depth = 16, |
| } |
| }; |
| |
| /* ------------------------------------------------------------------ |
| DMA and thread functions |
| ------------------------------------------------------------------*/ |
| |
| #define norm_maxw(a) 720 |
| #define norm_maxh(a) 576 |
| |
| #define norm_minw(a) norm_maxw(a) |
| #define norm_minh(a) norm_maxh(a) |
| |
| /* |
| * video-buf generic routine to get the next available buffer |
| */ |
| static inline void get_next_buf(struct tm6000_dmaqueue *dma_q, |
| struct tm6000_buffer **buf) |
| { |
| struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); |
| char *outp; |
| |
| if (list_empty(&dma_q->active)) { |
| dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n"); |
| *buf = NULL; |
| return; |
| } |
| |
| *buf = list_entry(dma_q->active.next, |
| struct tm6000_buffer, vb.queue); |
| |
| if (!buf) |
| return; |
| |
| /* Cleans up buffer - Usefull for testing for frame/URB loss */ |
| outp = videobuf_to_vmalloc(&(*buf)->vb); |
| |
| return; |
| } |
| |
| /* |
| * Announces that a buffer were filled and request the next |
| */ |
| static inline void buffer_filled(struct tm6000_core *dev, |
| struct tm6000_dmaqueue *dma_q, |
| struct tm6000_buffer *buf) |
| { |
| /* Advice that buffer was filled */ |
| dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i); |
| buf->vb.state = VIDEOBUF_DONE; |
| buf->vb.field_count++; |
| do_gettimeofday(&buf->vb.ts); |
| |
| list_del(&buf->vb.queue); |
| wake_up(&buf->vb.done); |
| } |
| |
| const char *tm6000_msg_type[] = { |
| "unknown(0)", /* 0 */ |
| "video", /* 1 */ |
| "audio", /* 2 */ |
| "vbi", /* 3 */ |
| "pts", /* 4 */ |
| "err", /* 5 */ |
| "unknown(6)", /* 6 */ |
| "unknown(7)", /* 7 */ |
| }; |
| |
| /* |
| * Identify the tm5600/6000 buffer header type and properly handles |
| */ |
| static int copy_streams(u8 *data, unsigned long len, |
| struct urb *urb) |
| { |
| struct tm6000_dmaqueue *dma_q = urb->context; |
| struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); |
| u8 *ptr=data, *endp=data+len, c; |
| unsigned long header=0; |
| int rc=0; |
| unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0; |
| struct tm6000_buffer *vbuf; |
| char *voutp = NULL; |
| unsigned int linewidth; |
| |
| /* get video buffer */ |
| get_next_buf (dma_q, &vbuf); |
| if (!vbuf) |
| return rc; |
| voutp = videobuf_to_vmalloc(&vbuf->vb); |
| if (!voutp) |
| return 0; |
| |
| for (ptr = data; ptr < endp;) { |
| if (!dev->isoc_ctl.cmd) { |
| /* Header */ |
| if (dev->isoc_ctl.tmp_buf_len > 0) { |
| /* from last urb or packet */ |
| header = dev->isoc_ctl.tmp_buf; |
| if (4 - dev->isoc_ctl.tmp_buf_len > 0) { |
| memcpy ((u8 *)&header + |
| dev->isoc_ctl.tmp_buf_len, |
| ptr, |
| 4 - dev->isoc_ctl.tmp_buf_len); |
| ptr += 4 - dev->isoc_ctl.tmp_buf_len; |
| } |
| dev->isoc_ctl.tmp_buf_len = 0; |
| } else { |
| if (ptr + 3 >= endp) { |
| /* have incomplete header */ |
| dev->isoc_ctl.tmp_buf_len = endp - ptr; |
| memcpy (&dev->isoc_ctl.tmp_buf, ptr, |
| dev->isoc_ctl.tmp_buf_len); |
| return rc; |
| } |
| /* Seek for sync */ |
| for (; ptr < endp - 3; ptr++) { |
| if (*(ptr + 3) == 0x47) |
| break; |
| } |
| /* Get message header */ |
| header = *(unsigned long *)ptr; |
| ptr += 4; |
| } |
| |
| /* split the header fields */ |
| c = (header >> 24) & 0xff; |
| size = ((header & 0x7e) << 1); |
| if (size > 0) |
| size -= 4; |
| block = (header >> 7) & 0xf; |
| field = (header >> 11) & 0x1; |
| line = (header >> 12) & 0x1ff; |
| cmd = (header >> 21) & 0x7; |
| /* Validates haeder fields */ |
| if (size > TM6000_URB_MSG_LEN) |
| size = TM6000_URB_MSG_LEN; |
| pktsize = TM6000_URB_MSG_LEN; |
| /* calculate position in buffer |
| * and change the buffer |
| */ |
| switch (cmd) { |
| case TM6000_URB_MSG_VIDEO: |
| if ((dev->isoc_ctl.vfield != field) && |
| (field == 1)) { |
| /* Announces that a new buffer |
| * were filled |
| */ |
| buffer_filled (dev, dma_q, vbuf); |
| dprintk (dev, V4L2_DEBUG_ISOC, |
| "new buffer filled\n"); |
| get_next_buf (dma_q, &vbuf); |
| if (!vbuf) |
| return rc; |
| voutp = videobuf_to_vmalloc (&vbuf->vb); |
| if (!voutp) |
| return rc; |
| memset(voutp, 0, vbuf->vb.size); |
| } |
| linewidth = vbuf->vb.width << 1; |
| pos = ((line << 1) - field - 1) * linewidth + |
| block * TM6000_URB_MSG_LEN; |
| /* Don't allow to write out of the buffer */ |
| if (pos + size > vbuf->vb.size) |
| cmd = TM6000_URB_MSG_ERR; |
| dev->isoc_ctl.vfield = field; |
| break; |
| case TM6000_URB_MSG_VBI: |
| break; |
| case TM6000_URB_MSG_AUDIO: |
| case TM6000_URB_MSG_PTS: |
| size = pktsize; /* Size is always 180 bytes */ |
| break; |
| } |
| } else { |
| /* Continue the last copy */ |
| cmd = dev->isoc_ctl.cmd; |
| size = dev->isoc_ctl.size; |
| pos = dev->isoc_ctl.pos; |
| pktsize = dev->isoc_ctl.pktsize; |
| } |
| cpysize = (endp - ptr > size) ? size : endp - ptr; |
| if (cpysize) { |
| /* copy data in different buffers */ |
| switch (cmd) { |
| case TM6000_URB_MSG_VIDEO: |
| /* Fills video buffer */ |
| if (vbuf) |
| memcpy (&voutp[pos], ptr, cpysize); |
| break; |
| case TM6000_URB_MSG_AUDIO: |
| tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize); |
| break; |
| case TM6000_URB_MSG_VBI: |
| /* Need some code to copy vbi buffer */ |
| break; |
| case TM6000_URB_MSG_PTS: |
| /* Need some code to copy pts */ |
| break; |
| } |
| } |
| if (ptr + pktsize > endp) { |
| /* End of URB packet, but cmd processing is not |
| * complete. Preserve the state for a next packet |
| */ |
| dev->isoc_ctl.pos = pos + cpysize; |
| dev->isoc_ctl.size = size - cpysize; |
| dev->isoc_ctl.cmd = cmd; |
| dev->isoc_ctl.pktsize = pktsize - (endp - ptr); |
| ptr += endp - ptr; |
| } else { |
| dev->isoc_ctl.cmd = 0; |
| ptr += pktsize; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Identify the tm5600/6000 buffer header type and properly handles |
| */ |
| static int copy_multiplexed(u8 *ptr, unsigned long len, |
| struct urb *urb) |
| { |
| struct tm6000_dmaqueue *dma_q = urb->context; |
| struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); |
| unsigned int pos=dev->isoc_ctl.pos,cpysize; |
| int rc=1; |
| struct tm6000_buffer *buf; |
| char *outp = NULL; |
| |
| get_next_buf(dma_q, &buf); |
| if (buf) |
| outp = videobuf_to_vmalloc(&buf->vb); |
| |
| if (!outp) |
| return 0; |
| |
| while (len>0) { |
| cpysize=min(len,buf->vb.size-pos); |
| //printk("Copying %d bytes (max=%lu) from %p to %p[%u]\n",cpysize,(*buf)->vb.size,ptr,out_p,pos); |
| memcpy(&outp[pos], ptr, cpysize); |
| pos+=cpysize; |
| ptr+=cpysize; |
| len-=cpysize; |
| if (pos >= buf->vb.size) { |
| pos=0; |
| /* Announces that a new buffer were filled */ |
| buffer_filled (dev, dma_q, buf); |
| dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n"); |
| get_next_buf (dma_q, &buf); |
| if (!buf) |
| break; |
| outp = videobuf_to_vmalloc(&(buf->vb)); |
| if (!outp) |
| return rc; |
| pos = 0; |
| } |
| } |
| |
| dev->isoc_ctl.pos=pos; |
| return rc; |
| } |
| |
| static void inline print_err_status (struct tm6000_core *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch(status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronuously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronuously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet<0) { |
| dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n", |
| status, errmsg); |
| } else { |
| dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| |
| /* |
| * Controls the isoc copy of each urb packet |
| */ |
| static inline int tm6000_isoc_copy(struct urb *urb) |
| { |
| struct tm6000_dmaqueue *dma_q = urb->context; |
| struct tm6000_core *dev= container_of(dma_q,struct tm6000_core,vidq); |
| int i, len=0, rc=1, status; |
| char *p; |
| |
| if (urb->status < 0) { |
| print_err_status (dev, -1, urb->status); |
| return 0; |
| } |
| |
| for (i = 0; i < urb->number_of_packets; i++) { |
| status = urb->iso_frame_desc[i].status; |
| |
| if (status<0) { |
| print_err_status (dev,i,status); |
| continue; |
| } |
| |
| len = urb->iso_frame_desc[i].actual_length; |
| |
| if (len > 0) { |
| p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; |
| if (!urb->iso_frame_desc[i].status) { |
| if ((dev->fourcc)==V4L2_PIX_FMT_TM6000) { |
| rc=copy_multiplexed(p, len, urb); |
| if (rc<=0) |
| return rc; |
| } else { |
| copy_streams(p, len, urb); |
| } |
| } |
| } |
| } |
| return rc; |
| } |
| |
| /* ------------------------------------------------------------------ |
| URB control |
| ------------------------------------------------------------------*/ |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void tm6000_irq_callback(struct urb *urb) |
| { |
| struct tm6000_dmaqueue *dma_q = urb->context; |
| struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); |
| int i; |
| |
| if (!dev) |
| return; |
| |
| spin_lock(&dev->slock); |
| tm6000_isoc_copy(urb); |
| spin_unlock(&dev->slock); |
| |
| /* Reset urb buffers */ |
| for (i = 0; i < urb->number_of_packets; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| urb->iso_frame_desc[i].actual_length = 0; |
| } |
| |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) |
| tm6000_err("urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| |
| /* |
| * Stop and Deallocate URBs |
| */ |
| static void tm6000_uninit_isoc(struct tm6000_core *dev) |
| { |
| struct urb *urb; |
| int i; |
| |
| dev->isoc_ctl.buf = NULL; |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb=dev->isoc_ctl.urb[i]; |
| if (urb) { |
| usb_kill_urb(urb); |
| usb_unlink_urb(urb); |
| if (dev->isoc_ctl.transfer_buffer[i]) { |
| usb_free_coherent(dev->udev, |
| urb->transfer_buffer_length, |
| dev->isoc_ctl.transfer_buffer[i], |
| urb->transfer_dma); |
| } |
| usb_free_urb(urb); |
| dev->isoc_ctl.urb[i] = NULL; |
| } |
| dev->isoc_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| kfree (dev->isoc_ctl.urb); |
| kfree (dev->isoc_ctl.transfer_buffer); |
| |
| dev->isoc_ctl.urb=NULL; |
| dev->isoc_ctl.transfer_buffer=NULL; |
| dev->isoc_ctl.num_bufs = 0; |
| } |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize) |
| { |
| struct tm6000_dmaqueue *dma_q = &dev->vidq; |
| int i, j, sb_size, pipe, size, max_packets, num_bufs = 8; |
| struct urb *urb; |
| |
| /* De-allocates all pending stuff */ |
| tm6000_uninit_isoc(dev); |
| |
| usb_set_interface(dev->udev, |
| dev->isoc_in.bInterfaceNumber, |
| dev->isoc_in.bAlternateSetting); |
| |
| pipe = usb_rcvisocpipe(dev->udev, |
| dev->isoc_in.endp->desc.bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK); |
| |
| size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); |
| |
| if (size > dev->isoc_in.maxsize) |
| size = dev->isoc_in.maxsize; |
| |
| dev->isoc_ctl.max_pkt_size = size; |
| |
| max_packets = ( framesize + size - 1) / size; |
| |
| if (max_packets > TM6000_MAX_ISO_PACKETS) |
| max_packets = TM6000_MAX_ISO_PACKETS; |
| |
| sb_size = max_packets * size; |
| |
| dev->isoc_ctl.num_bufs = num_bufs; |
| |
| dev->isoc_ctl.urb = kmalloc(sizeof(void *)*num_bufs, GFP_KERNEL); |
| if (!dev->isoc_ctl.urb) { |
| tm6000_err("cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->isoc_ctl.transfer_buffer = kmalloc(sizeof(void *)*num_bufs, |
| GFP_KERNEL); |
| if (!dev->isoc_ctl.transfer_buffer) { |
| tm6000_err("cannot allocate memory for usbtransfer\n"); |
| kfree(dev->isoc_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets" |
| " (%d bytes) of %d bytes each to handle %u size\n", |
| max_packets, num_bufs, sb_size, |
| dev->isoc_in.maxsize, size); |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| urb = usb_alloc_urb(max_packets, GFP_KERNEL); |
| if (!urb) { |
| tm6000_err("cannot alloc isoc_ctl.urb %i\n", i); |
| tm6000_uninit_isoc(dev); |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| dev->isoc_ctl.urb[i] = urb; |
| |
| dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev, |
| sb_size, GFP_KERNEL, &urb->transfer_dma); |
| if (!dev->isoc_ctl.transfer_buffer[i]) { |
| tm6000_err ("unable to allocate %i bytes for transfer" |
| " buffer %i%s\n", |
| sb_size, i, |
| in_interrupt()?" while in int":""); |
| tm6000_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); |
| |
| usb_fill_bulk_urb(urb, dev->udev, pipe, |
| dev->isoc_ctl.transfer_buffer[i], sb_size, |
| tm6000_irq_callback, dma_q); |
| urb->interval = dev->isoc_in.endp->desc.bInterval; |
| urb->number_of_packets = max_packets; |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| |
| for (j = 0; j < max_packets; j++) { |
| urb->iso_frame_desc[j].offset = size * j; |
| urb->iso_frame_desc[j].length = size; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int tm6000_start_thread( struct tm6000_core *dev) |
| { |
| struct tm6000_dmaqueue *dma_q = &dev->vidq; |
| int i; |
| |
| dma_q->frame=0; |
| dma_q->ini_jiffies=jiffies; |
| |
| init_waitqueue_head(&dma_q->wq); |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { |
| int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); |
| if (rc) { |
| tm6000_err("submit of urb %i failed (error=%i)\n", i, |
| rc); |
| tm6000_uninit_isoc(dev); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ |
| Videobuf operations |
| ------------------------------------------------------------------*/ |
| |
| static int |
| buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) |
| { |
| struct tm6000_fh *fh = vq->priv_data; |
| |
| *size = fh->fmt->depth * fh->width * fh->height >> 3; |
| if (0 == *count) |
| *count = TM6000_DEF_BUF; |
| |
| if (*count < TM6000_MIN_BUF) { |
| *count=TM6000_MIN_BUF; |
| } |
| |
| while (*size * *count > vid_limit * 1024 * 1024) |
| (*count)--; |
| |
| return 0; |
| } |
| |
| static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf) |
| { |
| struct tm6000_fh *fh = vq->priv_data; |
| struct tm6000_core *dev = fh->dev; |
| unsigned long flags; |
| |
| if (in_interrupt()) |
| BUG(); |
| |
| /* We used to wait for the buffer to finish here, but this didn't work |
| because, as we were keeping the state as VIDEOBUF_QUEUED, |
| videobuf_queue_cancel marked it as finished for us. |
| (Also, it could wedge forever if the hardware was misconfigured.) |
| |
| This should be safe; by the time we get here, the buffer isn't |
| queued anymore. If we ever start marking the buffers as |
| VIDEOBUF_ACTIVE, it won't be, though. |
| */ |
| spin_lock_irqsave(&dev->slock, flags); |
| if (dev->isoc_ctl.buf == buf) |
| dev->isoc_ctl.buf = NULL; |
| spin_unlock_irqrestore(&dev->slock, flags); |
| |
| videobuf_vmalloc_free(&buf->vb); |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| static int |
| buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct tm6000_fh *fh = vq->priv_data; |
| struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); |
| struct tm6000_core *dev = fh->dev; |
| int rc = 0, urb_init = 0; |
| |
| BUG_ON(NULL == fh->fmt); |
| |
| |
| /* FIXME: It assumes depth=2 */ |
| /* The only currently supported format is 16 bits/pixel */ |
| buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3; |
| if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) |
| return -EINVAL; |
| |
| if (buf->fmt != fh->fmt || |
| buf->vb.width != fh->width || |
| buf->vb.height != fh->height || |
| buf->vb.field != field) { |
| buf->fmt = fh->fmt; |
| buf->vb.width = fh->width; |
| buf->vb.height = fh->height; |
| buf->vb.field = field; |
| buf->vb.state = VIDEOBUF_NEEDS_INIT; |
| } |
| |
| if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { |
| if (0 != (rc = videobuf_iolock(vq, &buf->vb, NULL))) |
| goto fail; |
| urb_init = 1; |
| } |
| |
| if (!dev->isoc_ctl.num_bufs) |
| urb_init = 1; |
| |
| if (urb_init) { |
| rc = tm6000_prepare_isoc(dev, buf->vb.size); |
| if (rc < 0) |
| goto fail; |
| |
| rc = tm6000_start_thread(dev); |
| if (rc < 0) |
| goto fail; |
| |
| } |
| |
| buf->vb.state = VIDEOBUF_PREPARED; |
| return 0; |
| |
| fail: |
| free_buffer(vq, buf); |
| return rc; |
| } |
| |
| static void |
| buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); |
| struct tm6000_fh *fh = vq->priv_data; |
| struct tm6000_core *dev = fh->dev; |
| struct tm6000_dmaqueue *vidq = &dev->vidq; |
| |
| buf->vb.state = VIDEOBUF_QUEUED; |
| list_add_tail(&buf->vb.queue, &vidq->active); |
| } |
| |
| static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct tm6000_buffer *buf = container_of(vb,struct tm6000_buffer,vb); |
| |
| free_buffer(vq,buf); |
| } |
| |
| static struct videobuf_queue_ops tm6000_video_qops = { |
| .buf_setup = buffer_setup, |
| .buf_prepare = buffer_prepare, |
| .buf_queue = buffer_queue, |
| .buf_release = buffer_release, |
| }; |
| |
| /* ------------------------------------------------------------------ |
| IOCTL handling |
| ------------------------------------------------------------------*/ |
| |
| static int res_get(struct tm6000_core *dev, struct tm6000_fh *fh) |
| { |
| /* is it free? */ |
| mutex_lock(&dev->lock); |
| if (dev->resources) { |
| /* no, someone else uses it */ |
| mutex_unlock(&dev->lock); |
| return 0; |
| } |
| /* it's free, grab it */ |
| dev->resources =1; |
| dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n"); |
| mutex_unlock(&dev->lock); |
| return 1; |
| } |
| |
| static int res_locked(struct tm6000_core *dev) |
| { |
| return (dev->resources); |
| } |
| |
| static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh) |
| { |
| mutex_lock(&dev->lock); |
| dev->resources = 0; |
| dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n"); |
| mutex_unlock(&dev->lock); |
| } |
| |
| /* ------------------------------------------------------------------ |
| IOCTL vidioc handling |
| ------------------------------------------------------------------*/ |
| static int vidioc_querycap (struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| // struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; |
| |
| strlcpy(cap->driver, "tm6000", sizeof(cap->driver)); |
| strlcpy(cap->card,"Trident TVMaster TM5600/6000/6010", sizeof(cap->card)); |
| // strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info)); |
| cap->version = TM6000_VERSION; |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | |
| V4L2_CAP_STREAMING | |
| V4L2_CAP_TUNER | |
| V4L2_CAP_READWRITE; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap (struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (unlikely(f->index >= ARRAY_SIZE(format))) |
| return -EINVAL; |
| |
| strlcpy(f->description,format[f->index].name,sizeof(f->description)); |
| f->pixelformat = format[f->index].fourcc; |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap (struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| f->fmt.pix.width = fh->width; |
| f->fmt.pix.height = fh->height; |
| f->fmt.pix.field = fh->vb_vidq.field; |
| f->fmt.pix.pixelformat = fh->fmt->fourcc; |
| f->fmt.pix.bytesperline = |
| (f->fmt.pix.width * fh->fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = |
| f->fmt.pix.height * f->fmt.pix.bytesperline; |
| |
| return (0); |
| } |
| |
| static struct tm6000_fmt* format_by_fourcc(unsigned int fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(format); i++) |
| if (format[i].fourcc == fourcc) |
| return format+i; |
| return NULL; |
| } |
| |
| static int vidioc_try_fmt_vid_cap (struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; |
| struct tm6000_fmt *fmt; |
| enum v4l2_field field; |
| |
| fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| if (NULL == fmt) { |
| dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Fourcc format (0x%08x)" |
| " invalid.\n", f->fmt.pix.pixelformat); |
| return -EINVAL; |
| } |
| |
| field = f->fmt.pix.field; |
| |
| if (field == V4L2_FIELD_ANY) { |
| // field=V4L2_FIELD_INTERLACED; |
| field=V4L2_FIELD_SEQ_TB; |
| } else if (V4L2_FIELD_INTERLACED != field) { |
| dprintk(dev, V4L2_DEBUG_IOCTL_ARG, "Field type invalid.\n"); |
| return -EINVAL; |
| } |
| |
| tm6000_get_std_res (dev); |
| |
| f->fmt.pix.width = dev->width; |
| f->fmt.pix.height = dev->height; |
| |
| f->fmt.pix.width &= ~0x01; |
| |
| f->fmt.pix.field = field; |
| |
| f->fmt.pix.bytesperline = |
| (f->fmt.pix.width * fmt->depth) >> 3; |
| f->fmt.pix.sizeimage = |
| f->fmt.pix.height * f->fmt.pix.bytesperline; |
| |
| return 0; |
| } |
| |
| /*FIXME: This seems to be generic enough to be at videodev2 */ |
| static int vidioc_s_fmt_vid_cap (struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| int ret = vidioc_try_fmt_vid_cap(file,fh,f); |
| if (ret < 0) |
| return (ret); |
| |
| fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); |
| fh->width = f->fmt.pix.width; |
| fh->height = f->fmt.pix.height; |
| fh->vb_vidq.field = f->fmt.pix.field; |
| fh->type = f->type; |
| |
| dev->fourcc = f->fmt.pix.pixelformat; |
| |
| tm6000_set_fourcc_format(dev); |
| |
| return (0); |
| } |
| |
| static int vidioc_reqbufs (struct file *file, void *priv, |
| struct v4l2_requestbuffers *p) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| return (videobuf_reqbufs(&fh->vb_vidq, p)); |
| } |
| |
| static int vidioc_querybuf (struct file *file, void *priv, |
| struct v4l2_buffer *p) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| return (videobuf_querybuf(&fh->vb_vidq, p)); |
| } |
| |
| static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| return (videobuf_qbuf(&fh->vb_vidq, p)); |
| } |
| |
| static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| return (videobuf_dqbuf(&fh->vb_vidq, p, |
| file->f_flags & O_NONBLOCK)); |
| } |
| |
| #ifdef CONFIG_VIDEO_V4L1_COMPAT |
| static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) |
| { |
| struct tm6000_fh *fh=priv; |
| |
| return videobuf_cgmbuf (&fh->vb_vidq, mbuf, 8); |
| } |
| #endif |
| |
| static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| if (i != fh->type) |
| return -EINVAL; |
| |
| if (!res_get(dev,fh)) |
| return -EBUSY; |
| return (videobuf_streamon(&fh->vb_vidq)); |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) |
| return -EINVAL; |
| if (i != fh->type) |
| return -EINVAL; |
| |
| videobuf_streamoff(&fh->vb_vidq); |
| res_free(dev,fh); |
| |
| return (0); |
| } |
| |
| static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm) |
| { |
| int rc=0; |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| rc=tm6000_set_standard (dev, norm); |
| |
| fh->width = dev->width; |
| fh->height = dev->height; |
| |
| if (rc<0) |
| return rc; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm); |
| |
| return 0; |
| } |
| |
| static int vidioc_enum_input (struct file *file, void *priv, |
| struct v4l2_input *inp) |
| { |
| switch (inp->index) { |
| case TM6000_INPUT_TV: |
| inp->type = V4L2_INPUT_TYPE_TUNER; |
| strcpy(inp->name,"Television"); |
| break; |
| case TM6000_INPUT_COMPOSITE: |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| strcpy(inp->name,"Composite"); |
| break; |
| case TM6000_INPUT_SVIDEO: |
| inp->type = V4L2_INPUT_TYPE_CAMERA; |
| strcpy(inp->name,"S-Video"); |
| break; |
| default: |
| return -EINVAL; |
| } |
| inp->std = TM6000_STD; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_input (struct file *file, void *priv, unsigned int *i) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| *i=dev->input; |
| |
| return 0; |
| } |
| static int vidioc_s_input (struct file *file, void *priv, unsigned int i) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| int rc=0; |
| char buf[1]; |
| |
| switch (i) { |
| case TM6000_INPUT_TV: |
| dev->input=i; |
| *buf=0; |
| break; |
| case TM6000_INPUT_COMPOSITE: |
| case TM6000_INPUT_SVIDEO: |
| dev->input=i; |
| *buf=1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| rc=tm6000_read_write_usb (dev, USB_DIR_OUT | USB_TYPE_VENDOR, |
| REQ_03_SET_GET_MCU_PIN, 0x03, 1, buf, 1); |
| |
| if (!rc) { |
| dev->input=i; |
| rc=vidioc_s_std (file, priv, &dev->vfd->current_norm); |
| } |
| |
| return (rc); |
| } |
| |
| /* --- controls ---------------------------------------------- */ |
| static int vidioc_queryctrl (struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++) |
| if (qc->id && qc->id == tm6000_qctrl[i].id) { |
| memcpy(qc, &(tm6000_qctrl[i]), |
| sizeof(*qc)); |
| return (0); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl (struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct tm6000_fh *fh=priv; |
| struct tm6000_core *dev = fh->dev; |
| int val; |
| |
| /* FIXME: Probably, those won't work! Maybe we need shadow regs */ |
| switch (ctrl->id) { |
| case V4L2_CID_CONTRAST: |
| val = tm6000_get_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0); |
| break; |
| case V4L2_CID_BRIGHTNESS: |
| val = tm6000_get_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0); |
| return 0; |
| case V4L2_CID_SATURATION: |
| val = tm6000_get_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0); |
| return 0; |
| case V4L2_CID_HUE: |
| val = tm6000_get_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, 0); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| |
| if (val<0) |
| return val; |
| |
| ctrl->value=val; |
| |
| return 0; |
| } |
| static int vidioc_s_ctrl (struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct tm6000_fh *fh =priv; |
| struct tm6000_core *dev = fh->dev; |
| u8 val=ctrl->value; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_CONTRAST: |
| tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val); |
| return 0; |
| case V4L2_CID_BRIGHTNESS: |
| tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val); |
| return 0; |
| case V4L2_CID_SATURATION: |
| tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val); |
| return 0; |
| case V4L2_CID_HUE: |
| tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_tuner (struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct tm6000_fh *fh =priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (unlikely(UNSET == dev->tuner_type)) |
| return -EINVAL; |
| if (0 != t->index) |
| return -EINVAL; |
| |
| strcpy(t->name, "Television"); |
| t->type = V4L2_TUNER_ANALOG_TV; |
| t->capability = V4L2_TUNER_CAP_NORM; |
| t->rangehigh = 0xffffffffUL; |
| t->rxsubchans = V4L2_TUNER_SUB_MONO; |
| |
| return 0; |
| } |
| |
| static int vidioc_s_tuner (struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct tm6000_fh *fh =priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (UNSET == dev->tuner_type) |
| return -EINVAL; |
| if (0 != t->index) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_frequency (struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct tm6000_fh *fh =priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (unlikely(UNSET == dev->tuner_type)) |
| return -EINVAL; |
| |
| f->type = V4L2_TUNER_ANALOG_TV; |
| f->frequency = dev->freq; |
| |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_frequency (struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct tm6000_fh *fh =priv; |
| struct tm6000_core *dev = fh->dev; |
| |
| if (unlikely(f->type != V4L2_TUNER_ANALOG_TV)) |
| return -EINVAL; |
| |
| if (unlikely(UNSET == dev->tuner_type)) |
| return -EINVAL; |
| if (unlikely(f->tuner != 0)) |
| return -EINVAL; |
| |
| // mutex_lock(&dev->lock); |
| dev->freq = f->frequency; |
| v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f); |
| // mutex_unlock(&dev->lock); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ |
| File operations for the device |
| ------------------------------------------------------------------*/ |
| |
| static int tm6000_open(struct file *file) |
| { |
| struct video_device *vdev = video_devdata(file); |
| struct tm6000_core *dev = video_drvdata(file); |
| struct tm6000_fh *fh; |
| enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| int i,rc; |
| |
| printk(KERN_INFO "tm6000: open called (dev=%s)\n", |
| video_device_node_name(vdev)); |
| |
| dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n", |
| video_device_node_name(vdev)); |
| |
| |
| /* If more than one user, mutex should be added */ |
| dev->users++; |
| |
| dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n", |
| video_device_node_name(vdev), v4l2_type_names[type], |
| dev->users); |
| |
| /* allocate + initialize per filehandle data */ |
| fh = kzalloc(sizeof(*fh),GFP_KERNEL); |
| if (NULL == fh) { |
| dev->users--; |
| return -ENOMEM; |
| } |
| |
| file->private_data = fh; |
| fh->dev = dev; |
| |
| fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| dev->fourcc = format[0].fourcc; |
| |
| fh->fmt = format_by_fourcc(dev->fourcc); |
| |
| tm6000_get_std_res (dev); |
| |
| fh->width = dev->width; |
| fh->height = dev->height; |
| |
| dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=0x%08lx, dev=0x%08lx, " |
| "dev->vidq=0x%08lx\n", |
| (unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq); |
| dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " |
| "queued=%d\n",list_empty(&dev->vidq.queued)); |
| dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty " |
| "active=%d\n",list_empty(&dev->vidq.active)); |
| |
| /* initialize hardware on analog mode */ |
| if (dev->mode!=TM6000_MODE_ANALOG) { |
| rc=tm6000_init_analog_mode (dev); |
| if (rc<0) |
| return rc; |
| |
| /* Put all controls at a sane state */ |
| for (i = 0; i < ARRAY_SIZE(tm6000_qctrl); i++) |
| qctl_regs[i] =tm6000_qctrl[i].default_value; |
| |
| dev->mode=TM6000_MODE_ANALOG; |
| } |
| |
| videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops, |
| NULL, &dev->slock, |
| fh->type, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct tm6000_buffer),fh); |
| |
| return 0; |
| } |
| |
| static ssize_t |
| tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos) |
| { |
| struct tm6000_fh *fh = file->private_data; |
| |
| if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) { |
| if (res_locked(fh->dev)) |
| return -EBUSY; |
| |
| return videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, |
| file->f_flags & O_NONBLOCK); |
| } |
| return 0; |
| } |
| |
| static unsigned int |
| tm6000_poll(struct file *file, struct poll_table_struct *wait) |
| { |
| struct tm6000_fh *fh = file->private_data; |
| struct tm6000_buffer *buf; |
| |
| if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) |
| return POLLERR; |
| |
| if (res_get(fh->dev,fh)) { |
| /* streaming capture */ |
| if (list_empty(&fh->vb_vidq.stream)) |
| return POLLERR; |
| buf = list_entry(fh->vb_vidq.stream.next,struct tm6000_buffer,vb.stream); |
| } else { |
| /* read() capture */ |
| return videobuf_poll_stream(file, &fh->vb_vidq, |
| wait); |
| } |
| poll_wait(file, &buf->vb.done, wait); |
| if (buf->vb.state == VIDEOBUF_DONE || |
| buf->vb.state == VIDEOBUF_ERROR) |
| return POLLIN|POLLRDNORM; |
| return 0; |
| } |
| |
| static int tm6000_release(struct file *file) |
| { |
| struct tm6000_fh *fh = file->private_data; |
| struct tm6000_core *dev = fh->dev; |
| struct video_device *vdev = video_devdata(file); |
| |
| dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n", |
| video_device_node_name(vdev), dev->users); |
| |
| dev->users--; |
| |
| if (!dev->users) { |
| tm6000_uninit_isoc(dev); |
| videobuf_mmap_free(&fh->vb_vidq); |
| } |
| |
| kfree (fh); |
| |
| return 0; |
| } |
| |
| static int tm6000_mmap(struct file *file, struct vm_area_struct * vma) |
| { |
| struct tm6000_fh *fh = file->private_data; |
| int ret; |
| |
| ret=videobuf_mmap_mapper(&fh->vb_vidq, vma); |
| |
| return ret; |
| } |
| |
| static struct v4l2_file_operations tm6000_fops = { |
| .owner = THIS_MODULE, |
| .open = tm6000_open, |
| .release = tm6000_release, |
| .ioctl = video_ioctl2, /* V4L2 ioctl handler */ |
| .read = tm6000_read, |
| .poll = tm6000_poll, |
| .mmap = tm6000_mmap, |
| }; |
| |
| static const struct v4l2_ioctl_ops video_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| #ifdef CONFIG_VIDEO_V4L1_COMPAT |
| .vidiocgmbuf = vidiocgmbuf, |
| #endif |
| }; |
| |
| static struct video_device tm6000_template = { |
| .name = "tm6000", |
| .fops = &tm6000_fops, |
| .ioctl_ops = &video_ioctl_ops, |
| .release = video_device_release, |
| .tvnorms = TM6000_STD, |
| .current_norm = V4L2_STD_NTSC_M, |
| }; |
| |
| /* ----------------------------------------------------------------- |
| Initialization and module stuff |
| ------------------------------------------------------------------*/ |
| |
| int tm6000_v4l2_register(struct tm6000_core *dev) |
| { |
| int ret = -1; |
| struct video_device *vfd; |
| |
| vfd = video_device_alloc(); |
| if(!vfd) { |
| return -ENOMEM; |
| } |
| dev->vfd = vfd; |
| |
| /* init video dma queues */ |
| INIT_LIST_HEAD(&dev->vidq.active); |
| INIT_LIST_HEAD(&dev->vidq.queued); |
| |
| memcpy (dev->vfd, &tm6000_template, sizeof(*(dev->vfd))); |
| dev->vfd->debug=tm6000_debug; |
| vfd->v4l2_dev = &dev->v4l2_dev; |
| video_set_drvdata(vfd, dev); |
| |
| ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); |
| printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); |
| return ret; |
| } |
| |
| int tm6000_v4l2_unregister(struct tm6000_core *dev) |
| { |
| video_unregister_device(dev->vfd); |
| |
| return 0; |
| } |
| |
| int tm6000_v4l2_exit(void) |
| { |
| return 0; |
| } |
| |
| module_param(video_nr, int, 0); |
| MODULE_PARM_DESC(video_nr,"Allow changing video device number"); |
| |
| module_param_named (debug, tm6000_debug, int, 0444); |
| MODULE_PARM_DESC(debug,"activates debug info"); |
| |
| module_param(vid_limit,int,0644); |
| MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes"); |
| |