Documentation/devicetree/bindings/clock/microchip,mpfs.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip PolarFire Clock Control Module Binding

maintainers:
  - Daire McNamara <daire.mcnamara@microchip.com>

description: |
  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
  which gates and enables all peripheral clocks.

  This device tree binding describes 33 gate clocks.  Clocks are referenced by
  user nodes by the CLKCFG node phandle and the clock index in the group, from
  0 to 32.

properties:
  compatible:
    const: microchip,mpfs-clkcfg

  reg:
    items:
      - description: |
          clock config registers:
          These registers contain enable, reset & divider tables for the, cpu,
          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
          for the peripheral clocks.
      - description: |
          mss pll dri registers:
          Block of registers responsible for dynamic reconfiguration of the mss
          pll

  clocks:
    maxItems: 1

  '#clock-cells':
    const: 1
    description: |
      The clock consumer should specify the desired clock by having the clock
      ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
      for the full list of PolarFire clock IDs.

required:
  - compatible
  - reg
  - clocks
  - '#clock-cells'

additionalProperties: false

examples:
  # Clock Config node:
  - |
    #include <dt-bindings/clock/microchip,mpfs-clock.h>
    soc {
            #address-cells = <2>;
            #size-cells = <2>;
            clkcfg: clock-controller@20002000 {
                compatible = "microchip,mpfs-clkcfg";
                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
                clocks = <&ref>;
                #clock-cells = <1>;
        };
    };