| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2016 Marvell Technology Group Ltd. |
| * |
| * Device Tree file for MACCHIATOBin Armada 8040 community board platform |
| */ |
| |
| #include "armada-8040.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Marvell 8040 MACCHIATOBin"; |
| compatible = "marvell,armada8040-mcbin", "marvell,armada8040", |
| "marvell,armada-ap806-quad", "marvell,armada-ap806"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| aliases { |
| ethernet0 = &cp0_eth0; |
| ethernet1 = &cp1_eth0; |
| ethernet2 = &cp1_eth1; |
| ethernet3 = &cp1_eth2; |
| }; |
| |
| /* Regulator labels correspond with schematics */ |
| v_3_3: regulator-3-3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_3_3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| status = "okay"; |
| }; |
| |
| v_vddo_h: regulator-1-8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_vddo_h"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| status = "okay"; |
| }; |
| |
| v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_xhci_vbus_pins>; |
| regulator-name = "v_5v0_usb3_hst_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| status = "okay"; |
| }; |
| |
| sfp_eth0: sfp-eth0 { |
| /* CON15,16 - CPM lane 4 */ |
| compatible = "sff,sfp"; |
| i2c-bus = <&sfpp0_i2c>; |
| los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; |
| tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; |
| tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp1_sfpp0_pins>; |
| maximum-power-milliwatt = <2000>; |
| }; |
| |
| sfp_eth1: sfp-eth1 { |
| /* CON17,18 - CPS lane 4 */ |
| compatible = "sff,sfp"; |
| i2c-bus = <&sfpp1_i2c>; |
| los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; |
| tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; |
| tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; |
| maximum-power-milliwatt = <2000>; |
| }; |
| |
| sfp_eth3: sfp-eth3 { |
| /* CON13,14 - CPS lane 5 */ |
| compatible = "sff,sfp"; |
| i2c-bus = <&sfp_1g_i2c>; |
| los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; |
| tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; |
| tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; |
| maximum-power-milliwatt = <2000>; |
| }; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| pinctrl-0 = <&uart0_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &ap_sdhci0 { |
| bus-width = <8>; |
| /* |
| * Not stable in HS modes - phy needs "more calibration", so add |
| * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. |
| */ |
| marvell,xenon-phy-slow-mode; |
| no-1-8-v; |
| no-sd; |
| no-sdio; |
| non-removable; |
| status = "okay"; |
| vqmmc-supply = <&v_vddo_h>; |
| }; |
| |
| &cp0_i2c0 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_i2c0_pins>; |
| status = "okay"; |
| }; |
| |
| &cp0_i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_i2c1_pins>; |
| status = "okay"; |
| |
| i2c-switch@70 { |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x70>; |
| |
| sfpp0_i2c: i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| sfpp1_i2c: i2c@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| }; |
| sfp_1g_i2c: i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| }; |
| }; |
| }; |
| |
| /* J25 UART header */ |
| &cp0_uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_uart1_pins>; |
| status = "okay"; |
| }; |
| |
| &cp0_mdio { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_ge_mdio_pins>; |
| status = "okay"; |
| |
| ge_phy: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| &cp0_pcie0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_pcie_pins>; |
| num-lanes = <4>; |
| num-viewport = <8>; |
| reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; |
| ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; |
| phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, |
| <&cp0_comphy2 0>, <&cp0_comphy3 0>; |
| phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", |
| "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; |
| status = "okay"; |
| }; |
| |
| &cp0_pinctrl { |
| cp0_ge_mdio_pins: ge-mdio-pins { |
| marvell,pins = "mpp32", "mpp34"; |
| marvell,function = "ge"; |
| }; |
| cp0_i2c1_pins: i2c1-pins { |
| marvell,pins = "mpp35", "mpp36"; |
| marvell,function = "i2c1"; |
| }; |
| cp0_i2c0_pins: i2c0-pins { |
| marvell,pins = "mpp37", "mpp38"; |
| marvell,function = "i2c0"; |
| }; |
| cp0_uart1_pins: uart1-pins { |
| marvell,pins = "mpp40", "mpp41"; |
| marvell,function = "uart1"; |
| }; |
| cp0_xhci_vbus_pins: xhci0-vbus-pins { |
| marvell,pins = "mpp47"; |
| marvell,function = "gpio"; |
| }; |
| cp0_sfp_1g_pins: sfp-1g-pins { |
| marvell,pins = "mpp51", "mpp53", "mpp54"; |
| marvell,function = "gpio"; |
| }; |
| cp0_pcie_pins: pcie-pins { |
| marvell,pins = "mpp52"; |
| marvell,function = "gpio"; |
| }; |
| cp0_sdhci_pins: sdhci-pins { |
| marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", |
| "mpp60", "mpp61"; |
| marvell,function = "sdio"; |
| }; |
| cp0_sfpp1_pins: sfpp1-pins { |
| marvell,pins = "mpp62"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| &cp0_ethernet { |
| status = "okay"; |
| }; |
| |
| &cp0_eth0 { |
| /* Generic PHY, providing serdes lanes */ |
| phys = <&cp0_comphy4 0>; |
| }; |
| |
| &cp0_sata0 { |
| status = "okay"; |
| |
| /* CPM Lane 5 - U29 */ |
| sata-port@1 { |
| phys = <&cp0_comphy5 1>; |
| phy-names = "cp0-sata0-1-phy"; |
| }; |
| }; |
| |
| &cp0_sdhci0 { |
| /* U6 */ |
| broken-cd; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp0_sdhci_pins>; |
| status = "okay"; |
| vqmmc-supply = <&v_3_3>; |
| }; |
| |
| &cp0_utmi { |
| status = "okay"; |
| }; |
| |
| &cp0_usb3_0 { |
| /* J38? - USB2.0 only */ |
| phys = <&cp0_utmi0>; |
| phy-names = "utmi"; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &cp0_usb3_1 { |
| /* J38? - USB2.0 only */ |
| phys = <&cp0_utmi1>; |
| phy-names = "utmi"; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &cp1_ethernet { |
| status = "okay"; |
| }; |
| |
| &cp1_eth0 { |
| /* Generic PHY, providing serdes lanes */ |
| phys = <&cp1_comphy4 0>; |
| }; |
| |
| &cp1_eth1 { |
| /* CPS Lane 0 - J5 (Gigabit RJ45) */ |
| status = "okay"; |
| /* Network PHY */ |
| phy = <&ge_phy>; |
| phy-mode = "sgmii"; |
| /* Generic PHY, providing serdes lanes */ |
| phys = <&cp1_comphy0 1>; |
| }; |
| |
| &cp1_eth2 { |
| /* CPS Lane 5 */ |
| status = "okay"; |
| /* Network PHY */ |
| phy-mode = "2500base-x"; |
| managed = "in-band-status"; |
| /* Generic PHY, providing serdes lanes */ |
| phys = <&cp1_comphy5 2>; |
| sfp = <&sfp_eth3>; |
| }; |
| |
| &cp1_pinctrl { |
| cp1_sfpp1_pins: sfpp1-pins { |
| marvell,pins = "mpp8", "mpp10", "mpp11"; |
| marvell,function = "gpio"; |
| }; |
| cp1_spi1_pins: spi1-pins { |
| marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; |
| marvell,function = "spi1"; |
| }; |
| cp1_uart0_pins: uart0-pins { |
| marvell,pins = "mpp6", "mpp7"; |
| marvell,function = "uart0"; |
| }; |
| cp1_sfp_1g_pins: sfp-1g-pins { |
| marvell,pins = "mpp24"; |
| marvell,function = "gpio"; |
| }; |
| cp1_sfpp0_pins: sfpp0-pins { |
| marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| /* J27 UART header */ |
| &cp1_uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp1_uart0_pins>; |
| status = "okay"; |
| }; |
| |
| &cp1_sata0 { |
| status = "okay"; |
| |
| /* CPS Lane 1 - U32 */ |
| sata-port@0 { |
| phys = <&cp1_comphy1 0>; |
| phy-names = "cp1-sata0-0-phy"; |
| }; |
| |
| /* CPS Lane 3 - U31 */ |
| sata-port@1 { |
| phys = <&cp1_comphy3 1>; |
| phy-names = "cp1-sata0-1-phy"; |
| }; |
| }; |
| |
| &cp1_spi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cp1_spi1_pins>; |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "st,w25q32"; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &cp1_comphy2 { |
| cp1_usbh0_con: connector { |
| compatible = "usb-a-connector"; |
| phy-supply = <&v_5v0_usb3_hst_vbus>; |
| }; |
| }; |
| |
| &cp1_utmi { |
| status = "okay"; |
| }; |
| |
| &cp1_usb3_0 { |
| /* CPS Lane 2 - CON7 */ |
| phys = <&cp1_comphy2 0>, <&cp1_utmi0>; |
| phy-names = "cp1-usb3h0-comphy", "utmi"; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
