| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * CPU idle driver for Tegra CPUs |
| * |
| * Copyright (c) 2010-2013, NVIDIA Corporation. |
| * Copyright (c) 2011 Google, Inc. |
| * Author: Colin Cross <ccross@android.com> |
| * Gary King <gking@nvidia.com> |
| * |
| * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> |
| * |
| * Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com> |
| */ |
| |
| #define pr_fmt(fmt) "tegra-cpuidle: " fmt |
| |
| #include <linux/atomic.h> |
| #include <linux/cpuidle.h> |
| #include <linux/cpumask.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/platform_device.h> |
| #include <linux/types.h> |
| |
| #include <linux/clk/tegra.h> |
| #include <linux/firmware/trusted_foundations.h> |
| |
| #include <soc/tegra/cpuidle.h> |
| #include <soc/tegra/flowctrl.h> |
| #include <soc/tegra/fuse.h> |
| #include <soc/tegra/irq.h> |
| #include <soc/tegra/pm.h> |
| #include <soc/tegra/pmc.h> |
| |
| #include <asm/cpuidle.h> |
| #include <asm/firmware.h> |
| #include <asm/smp_plat.h> |
| #include <asm/suspend.h> |
| |
| enum tegra_state { |
| TEGRA_C1, |
| TEGRA_C7, |
| TEGRA_CC6, |
| TEGRA_STATE_COUNT, |
| }; |
| |
| static atomic_t tegra_idle_barrier; |
| static atomic_t tegra_abort_flag; |
| |
| static inline bool tegra_cpuidle_using_firmware(void) |
| { |
| return firmware_ops->prepare_idle && firmware_ops->do_idle; |
| } |
| |
| static void tegra_cpuidle_report_cpus_state(void) |
| { |
| unsigned long cpu, lcpu, csr; |
| |
| for_each_cpu(lcpu, cpu_possible_mask) { |
| cpu = cpu_logical_map(lcpu); |
| csr = flowctrl_read_cpu_csr(cpu); |
| |
| pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n", |
| cpu, cpu_online(lcpu), csr); |
| } |
| } |
| |
| static int tegra_cpuidle_wait_for_secondary_cpus_parking(void) |
| { |
| unsigned int retries = 3; |
| |
| while (retries--) { |
| unsigned int delay_us = 10; |
| unsigned int timeout_us = 500 * 1000 / delay_us; |
| |
| /* |
| * The primary CPU0 core shall wait for the secondaries |
| * shutdown in order to power-off CPU's cluster safely. |
| * The timeout value depends on the current CPU frequency, |
| * it takes about 40-150us in average and over 1000us in |
| * a worst case scenario. |
| */ |
| do { |
| if (tegra_cpu_rail_off_ready()) |
| return 0; |
| |
| udelay(delay_us); |
| |
| } while (timeout_us--); |
| |
| pr_err("secondary CPU taking too long to park\n"); |
| |
| tegra_cpuidle_report_cpus_state(); |
| } |
| |
| pr_err("timed out waiting secondaries to park\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static void tegra_cpuidle_unpark_secondary_cpus(void) |
| { |
| unsigned int cpu, lcpu; |
| |
| for_each_cpu(lcpu, cpu_online_mask) { |
| cpu = cpu_logical_map(lcpu); |
| |
| if (cpu > 0) { |
| tegra_enable_cpu_clock(cpu); |
| tegra_cpu_out_of_reset(cpu); |
| flowctrl_write_cpu_halt(cpu, 0); |
| } |
| } |
| } |
| |
| static int tegra_cpuidle_cc6_enter(unsigned int cpu) |
| { |
| int ret; |
| |
| if (cpu > 0) { |
| ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu); |
| } else { |
| ret = tegra_cpuidle_wait_for_secondary_cpus_parking(); |
| if (!ret) |
| ret = tegra_pm_enter_lp2(); |
| |
| tegra_cpuidle_unpark_secondary_cpus(); |
| } |
| |
| return ret; |
| } |
| |
| static int tegra_cpuidle_c7_enter(void) |
| { |
| int err; |
| |
| if (tegra_cpuidle_using_firmware()) { |
| err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); |
| if (err) |
| return err; |
| |
| return call_firmware_op(do_idle, 0); |
| } |
| |
| return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend); |
| } |
| |
| static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev) |
| { |
| if (tegra_pending_sgi()) { |
| /* |
| * CPU got local interrupt that will be lost after GIC's |
| * shutdown because GIC driver doesn't save/restore the |
| * pending SGI state across CPU cluster PM. Abort and retry |
| * next time. |
| */ |
| atomic_set(&tegra_abort_flag, 1); |
| } |
| |
| cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); |
| |
| if (atomic_read(&tegra_abort_flag)) { |
| cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); |
| atomic_set(&tegra_abort_flag, 0); |
| return -EINTR; |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_cpuidle_state_enter(struct cpuidle_device *dev, |
| int index, unsigned int cpu) |
| { |
| int err; |
| |
| /* |
| * CC6 state is the "CPU cluster power-off" state. In order to |
| * enter this state, at first the secondary CPU cores need to be |
| * parked into offline mode, then the last CPU should clean out |
| * remaining dirty cache lines into DRAM and trigger Flow Controller |
| * logic that turns off the cluster's power domain (which includes |
| * CPU cores, GIC and L2 cache). |
| */ |
| if (index == TEGRA_CC6) { |
| err = tegra_cpuidle_coupled_barrier(dev); |
| if (err) |
| return err; |
| } |
| |
| local_fiq_disable(); |
| tegra_pm_set_cpu_in_lp2(); |
| cpu_pm_enter(); |
| |
| switch (index) { |
| case TEGRA_C7: |
| err = tegra_cpuidle_c7_enter(); |
| break; |
| |
| case TEGRA_CC6: |
| err = tegra_cpuidle_cc6_enter(cpu); |
| break; |
| |
| default: |
| err = -EINVAL; |
| break; |
| } |
| |
| cpu_pm_exit(); |
| tegra_pm_clear_cpu_in_lp2(); |
| local_fiq_enable(); |
| |
| return err ?: index; |
| } |
| |
| static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu) |
| { |
| /* |
| * On Tegra30 CPU0 can't be power-gated separately from secondary |
| * cores because it gates the whole CPU cluster. |
| */ |
| if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30) |
| return index; |
| |
| /* put CPU0 into C1 if C7 is requested and secondaries are online */ |
| if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1) |
| index = TEGRA_C1; |
| else |
| index = TEGRA_CC6; |
| |
| return index; |
| } |
| |
| static int tegra_cpuidle_enter(struct cpuidle_device *dev, |
| struct cpuidle_driver *drv, |
| int index) |
| { |
| unsigned int cpu = cpu_logical_map(dev->cpu); |
| int ret; |
| |
| index = tegra_cpuidle_adjust_state_index(index, cpu); |
| if (dev->states_usage[index].disable) |
| return -1; |
| |
| if (index == TEGRA_C1) |
| ret = arm_cpuidle_simple_enter(dev, drv, index); |
| else |
| ret = tegra_cpuidle_state_enter(dev, index, cpu); |
| |
| if (ret < 0) { |
| if (ret != -EINTR || index != TEGRA_CC6) |
| pr_err_once("failed to enter state %d err: %d\n", |
| index, ret); |
| index = -1; |
| } else { |
| index = ret; |
| } |
| |
| return index; |
| } |
| |
| static int tegra114_enter_s2idle(struct cpuidle_device *dev, |
| struct cpuidle_driver *drv, |
| int index) |
| { |
| tegra_cpuidle_enter(dev, drv, index); |
| |
| return 0; |
| } |
| |
| /* |
| * The previous versions of Tegra CPUIDLE driver used a different "legacy" |
| * terminology for naming of the idling states, while this driver uses the |
| * new terminology. |
| * |
| * Mapping of the old terms into the new ones: |
| * |
| * Old | New |
| * --------- |
| * LP3 | C1 (CPU core clock gating) |
| * LP2 | C7 (CPU core power gating) |
| * LP2 | CC6 (CPU cluster power gating) |
| * |
| * Note that that the older CPUIDLE driver versions didn't explicitly |
| * differentiate the LP2 states because these states either used the same |
| * code path or because CC6 wasn't supported. |
| */ |
| static struct cpuidle_driver tegra_idle_driver = { |
| .name = "tegra_idle", |
| .states = { |
| [TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600), |
| [TEGRA_C7] = { |
| .enter = tegra_cpuidle_enter, |
| .exit_latency = 2000, |
| .target_residency = 2200, |
| .power_usage = 100, |
| .flags = CPUIDLE_FLAG_TIMER_STOP, |
| .name = "C7", |
| .desc = "CPU core powered off", |
| }, |
| [TEGRA_CC6] = { |
| .enter = tegra_cpuidle_enter, |
| .exit_latency = 5000, |
| .target_residency = 10000, |
| .power_usage = 0, |
| .flags = CPUIDLE_FLAG_TIMER_STOP | |
| CPUIDLE_FLAG_COUPLED, |
| .name = "CC6", |
| .desc = "CPU cluster powered off", |
| }, |
| }, |
| .state_count = TEGRA_STATE_COUNT, |
| .safe_state_index = TEGRA_C1, |
| }; |
| |
| static inline void tegra_cpuidle_disable_state(enum tegra_state state) |
| { |
| cpuidle_driver_state_disabled(&tegra_idle_driver, state, true); |
| } |
| |
| /* |
| * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether |
| * they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around |
| * this, simply disable CC6 if the PCI driver and DT node are both enabled. |
| */ |
| void tegra_cpuidle_pcie_irqs_in_use(void) |
| { |
| struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6]; |
| |
| if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) || |
| tegra_get_chip_id() != TEGRA20) |
| return; |
| |
| pr_info("disabling CC6 state, since PCIe IRQs are in use\n"); |
| tegra_cpuidle_disable_state(TEGRA_CC6); |
| } |
| |
| static void tegra_cpuidle_setup_tegra114_c7_state(void) |
| { |
| struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7]; |
| |
| s->enter_s2idle = tegra114_enter_s2idle; |
| s->target_residency = 1000; |
| s->exit_latency = 500; |
| } |
| |
| static int tegra_cpuidle_probe(struct platform_device *pdev) |
| { |
| /* LP2 could be disabled in device-tree */ |
| if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2) |
| tegra_cpuidle_disable_state(TEGRA_CC6); |
| |
| /* |
| * Required suspend-resume functionality, which is provided by the |
| * Tegra-arch core and PMC driver, is unavailable if PM-sleep option |
| * is disabled. |
| */ |
| if (!IS_ENABLED(CONFIG_PM_SLEEP)) { |
| if (!tegra_cpuidle_using_firmware()) |
| tegra_cpuidle_disable_state(TEGRA_C7); |
| |
| tegra_cpuidle_disable_state(TEGRA_CC6); |
| } |
| |
| /* |
| * Generic WFI state (also known as C1 or LP3) and the coupled CPU |
| * cluster power-off (CC6 or LP2) states are common for all Tegra SoCs. |
| */ |
| switch (tegra_get_chip_id()) { |
| case TEGRA20: |
| /* Tegra20 isn't capable to power-off individual CPU cores */ |
| tegra_cpuidle_disable_state(TEGRA_C7); |
| break; |
| |
| case TEGRA30: |
| break; |
| |
| case TEGRA114: |
| case TEGRA124: |
| tegra_cpuidle_setup_tegra114_c7_state(); |
| |
| /* coupled CC6 (LP2) state isn't implemented yet */ |
| tegra_cpuidle_disable_state(TEGRA_CC6); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); |
| } |
| |
| static struct platform_driver tegra_cpuidle_driver = { |
| .probe = tegra_cpuidle_probe, |
| .driver = { |
| .name = "tegra-cpuidle", |
| }, |
| }; |
| builtin_platform_driver(tegra_cpuidle_driver); |