| // SPDX-License-Identifier: GPL-2.0 |
| /* Intel DWMAC platform driver |
| * |
| * Copyright(C) 2020 Intel Corporation |
| */ |
| |
| #include <linux/ethtool.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/stmmac.h> |
| |
| #include "dwmac4.h" |
| #include "stmmac.h" |
| #include "stmmac_platform.h" |
| |
| struct intel_dwmac { |
| struct device *dev; |
| struct clk *tx_clk; |
| const struct intel_dwmac_data *data; |
| }; |
| |
| struct intel_dwmac_data { |
| void (*fix_mac_speed)(void *priv, unsigned int speed); |
| unsigned long ptp_ref_clk_rate; |
| unsigned long tx_clk_rate; |
| bool tx_clk_en; |
| }; |
| |
| static void kmb_eth_fix_mac_speed(void *priv, unsigned int speed) |
| { |
| struct intel_dwmac *dwmac = priv; |
| unsigned long rate; |
| int ret; |
| |
| rate = clk_get_rate(dwmac->tx_clk); |
| |
| switch (speed) { |
| case SPEED_1000: |
| rate = 125000000; |
| break; |
| |
| case SPEED_100: |
| rate = 25000000; |
| break; |
| |
| case SPEED_10: |
| rate = 2500000; |
| break; |
| |
| default: |
| dev_err(dwmac->dev, "Invalid speed\n"); |
| break; |
| } |
| |
| ret = clk_set_rate(dwmac->tx_clk, rate); |
| if (ret) |
| dev_err(dwmac->dev, "Failed to configure tx clock rate\n"); |
| } |
| |
| static const struct intel_dwmac_data kmb_data = { |
| .fix_mac_speed = kmb_eth_fix_mac_speed, |
| .ptp_ref_clk_rate = 200000000, |
| .tx_clk_rate = 125000000, |
| .tx_clk_en = true, |
| }; |
| |
| static const struct of_device_id intel_eth_plat_match[] = { |
| { .compatible = "intel,keembay-dwmac", .data = &kmb_data }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, intel_eth_plat_match); |
| |
| static int intel_eth_plat_probe(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct stmmac_priv *priv = netdev_priv(ndev); |
| struct plat_stmmacenet_data *plat_dat; |
| struct stmmac_resources stmmac_res; |
| const struct of_device_id *match; |
| struct intel_dwmac *dwmac; |
| unsigned long rate; |
| int ret; |
| |
| plat_dat = priv->plat; |
| ret = stmmac_get_platform_resources(pdev, &stmmac_res); |
| if (ret) |
| return ret; |
| |
| plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); |
| if (IS_ERR(plat_dat)) { |
| dev_err(&pdev->dev, "dt configuration failed\n"); |
| return PTR_ERR(plat_dat); |
| } |
| |
| dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); |
| if (!dwmac) { |
| ret = -ENOMEM; |
| goto err_remove_config_dt; |
| } |
| |
| dwmac->dev = &pdev->dev; |
| dwmac->tx_clk = NULL; |
| |
| match = of_match_device(intel_eth_plat_match, &pdev->dev); |
| if (match && match->data) { |
| dwmac->data = (const struct intel_dwmac_data *)match->data; |
| |
| if (dwmac->data->fix_mac_speed) |
| plat_dat->fix_mac_speed = dwmac->data->fix_mac_speed; |
| |
| /* Enable TX clock */ |
| if (dwmac->data->tx_clk_en) { |
| dwmac->tx_clk = devm_clk_get(&pdev->dev, "tx_clk"); |
| if (IS_ERR(dwmac->tx_clk)) |
| goto err_remove_config_dt; |
| |
| clk_prepare_enable(dwmac->tx_clk); |
| |
| /* Check and configure TX clock rate */ |
| rate = clk_get_rate(dwmac->tx_clk); |
| if (dwmac->data->tx_clk_rate && |
| rate != dwmac->data->tx_clk_rate) { |
| rate = dwmac->data->tx_clk_rate; |
| ret = clk_set_rate(dwmac->tx_clk, rate); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to set tx_clk\n"); |
| return ret; |
| } |
| } |
| } |
| |
| /* Check and configure PTP ref clock rate */ |
| rate = clk_get_rate(plat_dat->clk_ptp_ref); |
| if (dwmac->data->ptp_ref_clk_rate && |
| rate != dwmac->data->ptp_ref_clk_rate) { |
| rate = dwmac->data->ptp_ref_clk_rate; |
| ret = clk_set_rate(plat_dat->clk_ptp_ref, rate); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to set clk_ptp_ref\n"); |
| return ret; |
| } |
| } |
| } |
| |
| plat_dat->bsp_priv = dwmac; |
| plat_dat->eee_usecs_rate = plat_dat->clk_ptp_rate; |
| |
| if (plat_dat->eee_usecs_rate > 0) { |
| u32 tx_lpi_usec; |
| |
| tx_lpi_usec = (plat_dat->eee_usecs_rate / 1000000) - 1; |
| writel(tx_lpi_usec, stmmac_res.addr + GMAC_1US_TIC_COUNTER); |
| } |
| |
| ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); |
| if (ret) { |
| clk_disable_unprepare(dwmac->tx_clk); |
| goto err_remove_config_dt; |
| } |
| |
| return 0; |
| |
| err_remove_config_dt: |
| stmmac_remove_config_dt(pdev, plat_dat); |
| |
| return ret; |
| } |
| |
| static int intel_eth_plat_remove(struct platform_device *pdev) |
| { |
| struct intel_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev); |
| int ret; |
| |
| ret = stmmac_pltfr_remove(pdev); |
| clk_disable_unprepare(dwmac->tx_clk); |
| |
| return ret; |
| } |
| |
| static struct platform_driver intel_eth_plat_driver = { |
| .probe = intel_eth_plat_probe, |
| .remove = intel_eth_plat_remove, |
| .driver = { |
| .name = "intel-eth-plat", |
| .pm = &stmmac_pltfr_pm_ops, |
| .of_match_table = intel_eth_plat_match, |
| }, |
| }; |
| module_platform_driver(intel_eth_plat_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Intel DWMAC platform driver"); |