| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // Copyright(c) 2020 Intel Corporation. All rights reserved. |
| // |
| // Author: Cezary Rojewski <cezary.rojewski@intel.com> |
| // |
| |
| #include <linux/devcoredump.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firmware.h> |
| #include <linux/pci.h> |
| #include <linux/pxa2xx_ssp.h> |
| #include "core.h" |
| #include "messages.h" |
| #include "registers.h" |
| |
| static bool catpt_dma_filter(struct dma_chan *chan, void *param) |
| { |
| return param == chan->device->dev; |
| } |
| |
| /* |
| * Either engine 0 or 1 can be used for image loading. |
| * Align with Windows driver equivalent and stick to engine 1. |
| */ |
| #define CATPT_DMA_DEVID 1 |
| #define CATPT_DMA_DSP_ADDR_MASK GENMASK(31, 20) |
| |
| struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev) |
| { |
| struct dma_slave_config config; |
| struct dma_chan *chan; |
| dma_cap_mask_t mask; |
| int ret; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_MEMCPY, mask); |
| |
| chan = dma_request_channel(mask, catpt_dma_filter, cdev->dev); |
| if (!chan) { |
| dev_err(cdev->dev, "request channel failed\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| memset(&config, 0, sizeof(config)); |
| config.direction = DMA_MEM_TO_DEV; |
| config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| config.src_maxburst = 16; |
| config.dst_maxburst = 16; |
| |
| ret = dmaengine_slave_config(chan, &config); |
| if (ret) { |
| dev_err(cdev->dev, "slave config failed: %d\n", ret); |
| dma_release_channel(chan); |
| return ERR_PTR(ret); |
| } |
| |
| return chan; |
| } |
| |
| static int catpt_dma_memcpy(struct catpt_dev *cdev, struct dma_chan *chan, |
| dma_addr_t dst_addr, dma_addr_t src_addr, |
| size_t size) |
| { |
| struct dma_async_tx_descriptor *desc; |
| enum dma_status status; |
| |
| desc = dmaengine_prep_dma_memcpy(chan, dst_addr, src_addr, size, |
| DMA_CTRL_ACK); |
| if (!desc) { |
| dev_err(cdev->dev, "prep dma memcpy failed\n"); |
| return -EIO; |
| } |
| |
| /* enable demand mode for dma channel */ |
| catpt_updatel_shim(cdev, HMDC, |
| CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), |
| CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id)); |
| dmaengine_submit(desc); |
| status = dma_wait_for_async_tx(desc); |
| /* regardless of status, disable access to HOST memory in demand mode */ |
| catpt_updatel_shim(cdev, HMDC, |
| CATPT_HMDC_HDDA(CATPT_DMA_DEVID, chan->chan_id), 0); |
| |
| return (status == DMA_COMPLETE) ? 0 : -EPROTO; |
| } |
| |
| int catpt_dma_memcpy_todsp(struct catpt_dev *cdev, struct dma_chan *chan, |
| dma_addr_t dst_addr, dma_addr_t src_addr, |
| size_t size) |
| { |
| return catpt_dma_memcpy(cdev, chan, dst_addr | CATPT_DMA_DSP_ADDR_MASK, |
| src_addr, size); |
| } |
| |
| int catpt_dma_memcpy_fromdsp(struct catpt_dev *cdev, struct dma_chan *chan, |
| dma_addr_t dst_addr, dma_addr_t src_addr, |
| size_t size) |
| { |
| return catpt_dma_memcpy(cdev, chan, dst_addr, |
| src_addr | CATPT_DMA_DSP_ADDR_MASK, size); |
| } |
| |
| int catpt_dmac_probe(struct catpt_dev *cdev) |
| { |
| struct dw_dma_chip *dmac; |
| int ret; |
| |
| dmac = devm_kzalloc(cdev->dev, sizeof(*dmac), GFP_KERNEL); |
| if (!dmac) |
| return -ENOMEM; |
| |
| dmac->regs = cdev->lpe_ba + cdev->spec->host_dma_offset[CATPT_DMA_DEVID]; |
| dmac->dev = cdev->dev; |
| dmac->irq = cdev->irq; |
| |
| ret = dma_coerce_mask_and_coherent(cdev->dev, DMA_BIT_MASK(31)); |
| if (ret) |
| return ret; |
| /* |
| * Caller is responsible for putting device in D0 to allow |
| * for I/O and memory access before probing DW. |
| */ |
| ret = dw_dma_probe(dmac); |
| if (ret) |
| return ret; |
| |
| cdev->dmac = dmac; |
| return 0; |
| } |
| |
| void catpt_dmac_remove(struct catpt_dev *cdev) |
| { |
| /* |
| * As do_dma_remove() juggles with pm_runtime_get_xxx() and |
| * pm_runtime_put_xxx() while both ADSP and DW 'devices' are part of |
| * the same module, caller makes sure pm_runtime_disable() is invoked |
| * before removing DW to prevent postmortem resume and suspend. |
| */ |
| dw_dma_remove(cdev->dmac); |
| } |
| |
| static void catpt_dsp_set_srampge(struct catpt_dev *cdev, struct resource *sram, |
| unsigned long mask, unsigned long new) |
| { |
| unsigned long old; |
| u32 off = sram->start; |
| u32 b = __ffs(mask); |
| |
| old = catpt_readl_pci(cdev, VDRTCTL0) & mask; |
| dev_dbg(cdev->dev, "SRAMPGE [0x%08lx] 0x%08lx -> 0x%08lx", |
| mask, old, new); |
| |
| if (old == new) |
| return; |
| |
| catpt_updatel_pci(cdev, VDRTCTL0, mask, new); |
| /* wait for SRAM power gating to propagate */ |
| udelay(60); |
| |
| /* |
| * Dummy read as the very first access after block enable |
| * to prevent byte loss in future operations. |
| */ |
| for_each_clear_bit_from(b, &new, fls_long(mask)) { |
| u8 buf[4]; |
| |
| /* newly enabled: new bit=0 while old bit=1 */ |
| if (test_bit(b, &old)) { |
| dev_dbg(cdev->dev, "sanitize block %ld: off 0x%08x\n", |
| b - __ffs(mask), off); |
| memcpy_fromio(buf, cdev->lpe_ba + off, sizeof(buf)); |
| } |
| off += CATPT_MEMBLOCK_SIZE; |
| } |
| } |
| |
| void catpt_dsp_update_srampge(struct catpt_dev *cdev, struct resource *sram, |
| unsigned long mask) |
| { |
| struct resource *res; |
| unsigned long new = 0; |
| |
| /* flag all busy blocks */ |
| for (res = sram->child; res; res = res->sibling) { |
| u32 h, l; |
| |
| h = (res->end - sram->start) / CATPT_MEMBLOCK_SIZE; |
| l = (res->start - sram->start) / CATPT_MEMBLOCK_SIZE; |
| new |= GENMASK(h, l); |
| } |
| |
| /* offset value given mask's start and invert it as ON=b0 */ |
| new = ~(new << __ffs(mask)) & mask; |
| |
| /* disable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); |
| |
| catpt_dsp_set_srampge(cdev, sram, mask, new); |
| |
| /* enable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, |
| CATPT_VDRTCTL2_DCLCGE); |
| } |
| |
| int catpt_dsp_stall(struct catpt_dev *cdev, bool stall) |
| { |
| u32 reg, val; |
| |
| val = stall ? CATPT_CS_STALL : 0; |
| catpt_updatel_shim(cdev, CS1, CATPT_CS_STALL, val); |
| |
| return catpt_readl_poll_shim(cdev, CS1, |
| reg, (reg & CATPT_CS_STALL) == val, |
| 500, 10000); |
| } |
| |
| static int catpt_dsp_reset(struct catpt_dev *cdev, bool reset) |
| { |
| u32 reg, val; |
| |
| val = reset ? CATPT_CS_RST : 0; |
| catpt_updatel_shim(cdev, CS1, CATPT_CS_RST, val); |
| |
| return catpt_readl_poll_shim(cdev, CS1, |
| reg, (reg & CATPT_CS_RST) == val, |
| 500, 10000); |
| } |
| |
| void lpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable) |
| { |
| u32 val; |
| |
| val = enable ? LPT_VDRTCTL0_APLLSE : 0; |
| catpt_updatel_pci(cdev, VDRTCTL0, LPT_VDRTCTL0_APLLSE, val); |
| } |
| |
| void wpt_dsp_pll_shutdown(struct catpt_dev *cdev, bool enable) |
| { |
| u32 val; |
| |
| val = enable ? WPT_VDRTCTL2_APLLSE : 0; |
| catpt_updatel_pci(cdev, VDRTCTL2, WPT_VDRTCTL2_APLLSE, val); |
| } |
| |
| static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti) |
| { |
| u32 mask, reg, val; |
| int ret; |
| |
| mutex_lock(&cdev->clk_mutex); |
| |
| val = lp ? CATPT_CS_LPCS : 0; |
| reg = catpt_readl_shim(cdev, CS1) & CATPT_CS_LPCS; |
| dev_dbg(cdev->dev, "LPCS [0x%08lx] 0x%08x -> 0x%08x", |
| CATPT_CS_LPCS, reg, val); |
| |
| if (reg == val) { |
| mutex_unlock(&cdev->clk_mutex); |
| return 0; |
| } |
| |
| if (waiti) { |
| /* wait for DSP to signal WAIT state */ |
| ret = catpt_readl_poll_shim(cdev, ISD, |
| reg, (reg & CATPT_ISD_DCPWM), |
| 500, 10000); |
| if (ret) { |
| dev_err(cdev->dev, "await WAITI timeout\n"); |
| mutex_unlock(&cdev->clk_mutex); |
| return ret; |
| } |
| } |
| |
| ret = catpt_readl_poll_shim(cdev, CLKCTL, |
| reg, !(reg & CATPT_CLKCTL_CFCIP), |
| 500, 10000); |
| if (ret) |
| dev_warn(cdev->dev, "clock change still in progress\n"); |
| |
| /* default to DSP core & audio fabric high clock */ |
| val |= CATPT_CS_DCS_HIGH; |
| mask = CATPT_CS_LPCS | CATPT_CS_DCS; |
| catpt_updatel_shim(cdev, CS1, mask, val); |
| |
| ret = catpt_readl_poll_shim(cdev, CLKCTL, |
| reg, !(reg & CATPT_CLKCTL_CFCIP), |
| 500, 10000); |
| if (ret) |
| dev_warn(cdev->dev, "clock change still in progress\n"); |
| |
| /* update PLL accordingly */ |
| cdev->spec->pll_shutdown(cdev, lp); |
| |
| mutex_unlock(&cdev->clk_mutex); |
| return 0; |
| } |
| |
| int catpt_dsp_update_lpclock(struct catpt_dev *cdev) |
| { |
| struct catpt_stream_runtime *stream; |
| |
| list_for_each_entry(stream, &cdev->stream_list, node) |
| if (stream->prepared) |
| return catpt_dsp_select_lpclock(cdev, false, true); |
| |
| return catpt_dsp_select_lpclock(cdev, true, true); |
| } |
| |
| /* bring registers to their defaults as HW won't reset itself */ |
| static void catpt_dsp_set_regs_defaults(struct catpt_dev *cdev) |
| { |
| int i; |
| |
| catpt_writel_shim(cdev, CS1, CATPT_CS_DEFAULT); |
| catpt_writel_shim(cdev, ISC, CATPT_ISC_DEFAULT); |
| catpt_writel_shim(cdev, ISD, CATPT_ISD_DEFAULT); |
| catpt_writel_shim(cdev, IMC, CATPT_IMC_DEFAULT); |
| catpt_writel_shim(cdev, IMD, CATPT_IMD_DEFAULT); |
| catpt_writel_shim(cdev, IPCC, CATPT_IPCC_DEFAULT); |
| catpt_writel_shim(cdev, IPCD, CATPT_IPCD_DEFAULT); |
| catpt_writel_shim(cdev, CLKCTL, CATPT_CLKCTL_DEFAULT); |
| catpt_writel_shim(cdev, CS2, CATPT_CS2_DEFAULT); |
| catpt_writel_shim(cdev, LTRC, CATPT_LTRC_DEFAULT); |
| catpt_writel_shim(cdev, HMDC, CATPT_HMDC_DEFAULT); |
| |
| for (i = 0; i < CATPT_SSP_COUNT; i++) { |
| catpt_writel_ssp(cdev, i, SSCR0, CATPT_SSC0_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSCR1, CATPT_SSC1_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSSR, CATPT_SSS_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSITR, CATPT_SSIT_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSDR, CATPT_SSD_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSTO, CATPT_SSTO_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSPSP, CATPT_SSPSP_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSTSA, CATPT_SSTSA_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSRSA, CATPT_SSRSA_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSTSS, CATPT_SSTSS_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSCR2, CATPT_SSCR2_DEFAULT); |
| catpt_writel_ssp(cdev, i, SSPSP2, CATPT_SSPSP2_DEFAULT); |
| } |
| } |
| |
| int lpt_dsp_power_down(struct catpt_dev *cdev) |
| { |
| catpt_dsp_reset(cdev, true); |
| |
| /* set 24Mhz clock for both SSPs */ |
| catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), |
| CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); |
| catpt_dsp_select_lpclock(cdev, true, false); |
| |
| /* DRAM power gating all */ |
| catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, |
| cdev->spec->dram_mask); |
| catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, |
| cdev->spec->iram_mask); |
| |
| catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot); |
| /* give hw time to drop off */ |
| udelay(50); |
| |
| return 0; |
| } |
| |
| int lpt_dsp_power_up(struct catpt_dev *cdev) |
| { |
| /* SRAM power gating none */ |
| catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0); |
| catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0); |
| |
| catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0); |
| /* give hw time to wake up */ |
| udelay(100); |
| |
| catpt_dsp_select_lpclock(cdev, false, false); |
| catpt_updatel_shim(cdev, CS1, |
| CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), |
| CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); |
| /* stagger DSP reset after clock selection */ |
| udelay(50); |
| |
| catpt_dsp_reset(cdev, false); |
| /* generate int deassert msg to fix inversed int logic */ |
| catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0); |
| |
| return 0; |
| } |
| |
| int wpt_dsp_power_down(struct catpt_dev *cdev) |
| { |
| u32 mask, val; |
| |
| /* disable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); |
| |
| catpt_dsp_reset(cdev, true); |
| /* set 24Mhz clock for both SSPs */ |
| catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), |
| CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); |
| catpt_dsp_select_lpclock(cdev, true, false); |
| /* disable MCLK */ |
| catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, 0); |
| |
| catpt_dsp_set_regs_defaults(cdev); |
| |
| /* switch clock gating */ |
| mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE); |
| val = mask & (~CATPT_VDRTCTL2_DTCGE); |
| catpt_updatel_pci(cdev, VDRTCTL2, mask, val); |
| /* enable DTCGE separatelly */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DTCGE, |
| CATPT_VDRTCTL2_DTCGE); |
| |
| /* SRAM power gating all */ |
| catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, |
| cdev->spec->dram_mask); |
| catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, |
| cdev->spec->iram_mask); |
| mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD; |
| catpt_updatel_pci(cdev, VDRTCTL0, mask, WPT_VDRTCTL0_D3PGD); |
| |
| catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D3hot); |
| /* give hw time to drop off */ |
| udelay(50); |
| |
| /* enable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, |
| CATPT_VDRTCTL2_DCLCGE); |
| udelay(50); |
| |
| return 0; |
| } |
| |
| int wpt_dsp_power_up(struct catpt_dev *cdev) |
| { |
| u32 mask, val; |
| |
| /* disable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, 0); |
| |
| /* switch clock gating */ |
| mask = CATPT_VDRTCTL2_CGEALL & (~CATPT_VDRTCTL2_DCLCGE); |
| val = mask & (~CATPT_VDRTCTL2_DTCGE); |
| catpt_updatel_pci(cdev, VDRTCTL2, mask, val); |
| |
| catpt_updatel_pci(cdev, PMCS, PCI_PM_CTRL_STATE_MASK, PCI_D0); |
| |
| /* SRAM power gating none */ |
| mask = WPT_VDRTCTL0_D3SRAMPGD | WPT_VDRTCTL0_D3PGD; |
| catpt_updatel_pci(cdev, VDRTCTL0, mask, mask); |
| catpt_dsp_set_srampge(cdev, &cdev->dram, cdev->spec->dram_mask, 0); |
| catpt_dsp_set_srampge(cdev, &cdev->iram, cdev->spec->iram_mask, 0); |
| |
| catpt_dsp_set_regs_defaults(cdev); |
| |
| /* restore MCLK */ |
| catpt_updatel_shim(cdev, CLKCTL, CATPT_CLKCTL_SMOS, CATPT_CLKCTL_SMOS); |
| catpt_dsp_select_lpclock(cdev, false, false); |
| /* set 24Mhz clock for both SSPs */ |
| catpt_updatel_shim(cdev, CS1, CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1), |
| CATPT_CS_SBCS(0) | CATPT_CS_SBCS(1)); |
| catpt_dsp_reset(cdev, false); |
| |
| /* enable core clock gating */ |
| catpt_updatel_pci(cdev, VDRTCTL2, CATPT_VDRTCTL2_DCLCGE, |
| CATPT_VDRTCTL2_DCLCGE); |
| |
| /* generate int deassert msg to fix inversed int logic */ |
| catpt_updatel_shim(cdev, IMC, CATPT_IMC_IPCDB | CATPT_IMC_IPCCD, 0); |
| |
| return 0; |
| } |
| |
| #define CATPT_DUMP_MAGIC 0xcd42 |
| #define CATPT_DUMP_SECTION_ID_FILE 0x00 |
| #define CATPT_DUMP_SECTION_ID_IRAM 0x01 |
| #define CATPT_DUMP_SECTION_ID_DRAM 0x02 |
| #define CATPT_DUMP_SECTION_ID_REGS 0x03 |
| #define CATPT_DUMP_HASH_SIZE 20 |
| |
| struct catpt_dump_section_hdr { |
| u16 magic; |
| u8 core_id; |
| u8 section_id; |
| u32 size; |
| }; |
| |
| int catpt_coredump(struct catpt_dev *cdev) |
| { |
| struct catpt_dump_section_hdr *hdr; |
| size_t dump_size, regs_size; |
| u8 *dump, *pos; |
| const char *eof; |
| char *info; |
| int i; |
| |
| regs_size = CATPT_SHIM_REGS_SIZE; |
| regs_size += CATPT_DMA_COUNT * CATPT_DMA_REGS_SIZE; |
| regs_size += CATPT_SSP_COUNT * CATPT_SSP_REGS_SIZE; |
| dump_size = resource_size(&cdev->dram); |
| dump_size += resource_size(&cdev->iram); |
| dump_size += regs_size; |
| /* account for header of each section and hash chunk */ |
| dump_size += 4 * sizeof(*hdr) + CATPT_DUMP_HASH_SIZE; |
| |
| dump = vzalloc(dump_size); |
| if (!dump) |
| return -ENOMEM; |
| |
| pos = dump; |
| |
| hdr = (struct catpt_dump_section_hdr *)pos; |
| hdr->magic = CATPT_DUMP_MAGIC; |
| hdr->core_id = cdev->spec->core_id; |
| hdr->section_id = CATPT_DUMP_SECTION_ID_FILE; |
| hdr->size = dump_size - sizeof(*hdr); |
| pos += sizeof(*hdr); |
| |
| info = cdev->ipc.config.fw_info; |
| eof = info + FW_INFO_SIZE_MAX; |
| /* navigate to fifth info segment (fw hash) */ |
| for (i = 0; i < 4 && info < eof; i++, info++) { |
| /* info segments are separated by space each */ |
| info = strnchr(info, eof - info, ' '); |
| if (!info) |
| break; |
| } |
| |
| if (i == 4 && info) |
| memcpy(pos, info, min_t(u32, eof - info, CATPT_DUMP_HASH_SIZE)); |
| pos += CATPT_DUMP_HASH_SIZE; |
| |
| hdr = (struct catpt_dump_section_hdr *)pos; |
| hdr->magic = CATPT_DUMP_MAGIC; |
| hdr->core_id = cdev->spec->core_id; |
| hdr->section_id = CATPT_DUMP_SECTION_ID_IRAM; |
| hdr->size = resource_size(&cdev->iram); |
| pos += sizeof(*hdr); |
| |
| memcpy_fromio(pos, cdev->lpe_ba + cdev->iram.start, hdr->size); |
| pos += hdr->size; |
| |
| hdr = (struct catpt_dump_section_hdr *)pos; |
| hdr->magic = CATPT_DUMP_MAGIC; |
| hdr->core_id = cdev->spec->core_id; |
| hdr->section_id = CATPT_DUMP_SECTION_ID_DRAM; |
| hdr->size = resource_size(&cdev->dram); |
| pos += sizeof(*hdr); |
| |
| memcpy_fromio(pos, cdev->lpe_ba + cdev->dram.start, hdr->size); |
| pos += hdr->size; |
| |
| hdr = (struct catpt_dump_section_hdr *)pos; |
| hdr->magic = CATPT_DUMP_MAGIC; |
| hdr->core_id = cdev->spec->core_id; |
| hdr->section_id = CATPT_DUMP_SECTION_ID_REGS; |
| hdr->size = regs_size; |
| pos += sizeof(*hdr); |
| |
| memcpy_fromio(pos, catpt_shim_addr(cdev), CATPT_SHIM_REGS_SIZE); |
| pos += CATPT_SHIM_REGS_SIZE; |
| |
| for (i = 0; i < CATPT_SSP_COUNT; i++) { |
| memcpy_fromio(pos, catpt_ssp_addr(cdev, i), |
| CATPT_SSP_REGS_SIZE); |
| pos += CATPT_SSP_REGS_SIZE; |
| } |
| for (i = 0; i < CATPT_DMA_COUNT; i++) { |
| memcpy_fromio(pos, catpt_dma_addr(cdev, i), |
| CATPT_DMA_REGS_SIZE); |
| pos += CATPT_DMA_REGS_SIZE; |
| } |
| |
| dev_coredumpv(cdev->dev, dump, dump_size, GFP_KERNEL); |
| |
| return 0; |
| } |