| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Virtio-mem device driver. |
| * |
| * Copyright Red Hat, Inc. 2020 |
| * |
| * Author(s): David Hildenbrand <david@redhat.com> |
| */ |
| |
| #include <linux/virtio.h> |
| #include <linux/virtio_mem.h> |
| #include <linux/workqueue.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/memory_hotplug.h> |
| #include <linux/memory.h> |
| #include <linux/hrtimer.h> |
| #include <linux/crash_dump.h> |
| #include <linux/mutex.h> |
| #include <linux/bitmap.h> |
| #include <linux/lockdep.h> |
| |
| #include <acpi/acpi_numa.h> |
| |
| static bool unplug_online = true; |
| module_param(unplug_online, bool, 0644); |
| MODULE_PARM_DESC(unplug_online, "Try to unplug online memory"); |
| |
| enum virtio_mem_mb_state { |
| /* Unplugged, not added to Linux. Can be reused later. */ |
| VIRTIO_MEM_MB_STATE_UNUSED = 0, |
| /* (Partially) plugged, not added to Linux. Error on add_memory(). */ |
| VIRTIO_MEM_MB_STATE_PLUGGED, |
| /* Fully plugged, fully added to Linux, offline. */ |
| VIRTIO_MEM_MB_STATE_OFFLINE, |
| /* Partially plugged, fully added to Linux, offline. */ |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL, |
| /* Fully plugged, fully added to Linux, online. */ |
| VIRTIO_MEM_MB_STATE_ONLINE, |
| /* Partially plugged, fully added to Linux, online. */ |
| VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL, |
| VIRTIO_MEM_MB_STATE_COUNT |
| }; |
| |
| struct virtio_mem { |
| struct virtio_device *vdev; |
| |
| /* We might first have to unplug all memory when starting up. */ |
| bool unplug_all_required; |
| |
| /* Workqueue that processes the plug/unplug requests. */ |
| struct work_struct wq; |
| atomic_t config_changed; |
| |
| /* Virtqueue for guest->host requests. */ |
| struct virtqueue *vq; |
| |
| /* Wait for a host response to a guest request. */ |
| wait_queue_head_t host_resp; |
| |
| /* Space for one guest request and the host response. */ |
| struct virtio_mem_req req; |
| struct virtio_mem_resp resp; |
| |
| /* The current size of the device. */ |
| uint64_t plugged_size; |
| /* The requested size of the device. */ |
| uint64_t requested_size; |
| |
| /* The device block size (for communicating with the device). */ |
| uint64_t device_block_size; |
| /* The translated node id. NUMA_NO_NODE in case not specified. */ |
| int nid; |
| /* Physical start address of the memory region. */ |
| uint64_t addr; |
| /* Maximum region size in bytes. */ |
| uint64_t region_size; |
| |
| /* The subblock size. */ |
| uint64_t subblock_size; |
| /* The number of subblocks per memory block. */ |
| uint32_t nb_sb_per_mb; |
| |
| /* Id of the first memory block of this device. */ |
| unsigned long first_mb_id; |
| /* Id of the last memory block of this device. */ |
| unsigned long last_mb_id; |
| /* Id of the last usable memory block of this device. */ |
| unsigned long last_usable_mb_id; |
| /* Id of the next memory bock to prepare when needed. */ |
| unsigned long next_mb_id; |
| |
| /* The parent resource for all memory added via this device. */ |
| struct resource *parent_resource; |
| /* |
| * Copy of "System RAM (virtio_mem)" to be used for |
| * add_memory_driver_managed(). |
| */ |
| const char *resource_name; |
| |
| /* Summary of all memory block states. */ |
| unsigned long nb_mb_state[VIRTIO_MEM_MB_STATE_COUNT]; |
| #define VIRTIO_MEM_NB_OFFLINE_THRESHOLD 10 |
| |
| /* |
| * One byte state per memory block. |
| * |
| * Allocated via vmalloc(). When preparing new blocks, resized |
| * (alloc+copy+free) when needed (crossing pages with the next mb). |
| * (when crossing pages). |
| * |
| * With 128MB memory blocks, we have states for 512GB of memory in one |
| * page. |
| */ |
| uint8_t *mb_state; |
| |
| /* |
| * $nb_sb_per_mb bit per memory block. Handled similar to mb_state. |
| * |
| * With 4MB subblocks, we manage 128GB of memory in one page. |
| */ |
| unsigned long *sb_bitmap; |
| |
| /* |
| * Mutex that protects the nb_mb_state, mb_state, and sb_bitmap. |
| * |
| * When this lock is held the pointers can't change, ONLINE and |
| * OFFLINE blocks can't change the state and no subblocks will get |
| * plugged/unplugged. |
| */ |
| struct mutex hotplug_mutex; |
| bool hotplug_active; |
| |
| /* An error occurred we cannot handle - stop processing requests. */ |
| bool broken; |
| |
| /* The driver is being removed. */ |
| spinlock_t removal_lock; |
| bool removing; |
| |
| /* Timer for retrying to plug/unplug memory. */ |
| struct hrtimer retry_timer; |
| unsigned int retry_timer_ms; |
| #define VIRTIO_MEM_RETRY_TIMER_MIN_MS 50000 |
| #define VIRTIO_MEM_RETRY_TIMER_MAX_MS 300000 |
| |
| /* Memory notifier (online/offline events). */ |
| struct notifier_block memory_notifier; |
| |
| /* Next device in the list of virtio-mem devices. */ |
| struct list_head next; |
| }; |
| |
| /* |
| * We have to share a single online_page callback among all virtio-mem |
| * devices. We use RCU to iterate the list in the callback. |
| */ |
| static DEFINE_MUTEX(virtio_mem_mutex); |
| static LIST_HEAD(virtio_mem_devices); |
| |
| static void virtio_mem_online_page_cb(struct page *page, unsigned int order); |
| |
| /* |
| * Register a virtio-mem device so it will be considered for the online_page |
| * callback. |
| */ |
| static int register_virtio_mem_device(struct virtio_mem *vm) |
| { |
| int rc = 0; |
| |
| /* First device registers the callback. */ |
| mutex_lock(&virtio_mem_mutex); |
| if (list_empty(&virtio_mem_devices)) |
| rc = set_online_page_callback(&virtio_mem_online_page_cb); |
| if (!rc) |
| list_add_rcu(&vm->next, &virtio_mem_devices); |
| mutex_unlock(&virtio_mem_mutex); |
| |
| return rc; |
| } |
| |
| /* |
| * Unregister a virtio-mem device so it will no longer be considered for the |
| * online_page callback. |
| */ |
| static void unregister_virtio_mem_device(struct virtio_mem *vm) |
| { |
| /* Last device unregisters the callback. */ |
| mutex_lock(&virtio_mem_mutex); |
| list_del_rcu(&vm->next); |
| if (list_empty(&virtio_mem_devices)) |
| restore_online_page_callback(&virtio_mem_online_page_cb); |
| mutex_unlock(&virtio_mem_mutex); |
| |
| synchronize_rcu(); |
| } |
| |
| /* |
| * Calculate the memory block id of a given address. |
| */ |
| static unsigned long virtio_mem_phys_to_mb_id(unsigned long addr) |
| { |
| return addr / memory_block_size_bytes(); |
| } |
| |
| /* |
| * Calculate the physical start address of a given memory block id. |
| */ |
| static unsigned long virtio_mem_mb_id_to_phys(unsigned long mb_id) |
| { |
| return mb_id * memory_block_size_bytes(); |
| } |
| |
| /* |
| * Calculate the subblock id of a given address. |
| */ |
| static unsigned long virtio_mem_phys_to_sb_id(struct virtio_mem *vm, |
| unsigned long addr) |
| { |
| const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr); |
| const unsigned long mb_addr = virtio_mem_mb_id_to_phys(mb_id); |
| |
| return (addr - mb_addr) / vm->subblock_size; |
| } |
| |
| /* |
| * Set the state of a memory block, taking care of the state counter. |
| */ |
| static void virtio_mem_mb_set_state(struct virtio_mem *vm, unsigned long mb_id, |
| enum virtio_mem_mb_state state) |
| { |
| const unsigned long idx = mb_id - vm->first_mb_id; |
| enum virtio_mem_mb_state old_state; |
| |
| old_state = vm->mb_state[idx]; |
| vm->mb_state[idx] = state; |
| |
| BUG_ON(vm->nb_mb_state[old_state] == 0); |
| vm->nb_mb_state[old_state]--; |
| vm->nb_mb_state[state]++; |
| } |
| |
| /* |
| * Get the state of a memory block. |
| */ |
| static enum virtio_mem_mb_state virtio_mem_mb_get_state(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| const unsigned long idx = mb_id - vm->first_mb_id; |
| |
| return vm->mb_state[idx]; |
| } |
| |
| /* |
| * Prepare the state array for the next memory block. |
| */ |
| static int virtio_mem_mb_state_prepare_next_mb(struct virtio_mem *vm) |
| { |
| unsigned long old_bytes = vm->next_mb_id - vm->first_mb_id + 1; |
| unsigned long new_bytes = vm->next_mb_id - vm->first_mb_id + 2; |
| int old_pages = PFN_UP(old_bytes); |
| int new_pages = PFN_UP(new_bytes); |
| uint8_t *new_mb_state; |
| |
| if (vm->mb_state && old_pages == new_pages) |
| return 0; |
| |
| new_mb_state = vzalloc(new_pages * PAGE_SIZE); |
| if (!new_mb_state) |
| return -ENOMEM; |
| |
| mutex_lock(&vm->hotplug_mutex); |
| if (vm->mb_state) |
| memcpy(new_mb_state, vm->mb_state, old_pages * PAGE_SIZE); |
| vfree(vm->mb_state); |
| vm->mb_state = new_mb_state; |
| mutex_unlock(&vm->hotplug_mutex); |
| |
| return 0; |
| } |
| |
| #define virtio_mem_for_each_mb_state(_vm, _mb_id, _state) \ |
| for (_mb_id = _vm->first_mb_id; \ |
| _mb_id < _vm->next_mb_id && _vm->nb_mb_state[_state]; \ |
| _mb_id++) \ |
| if (virtio_mem_mb_get_state(_vm, _mb_id) == _state) |
| |
| #define virtio_mem_for_each_mb_state_rev(_vm, _mb_id, _state) \ |
| for (_mb_id = _vm->next_mb_id - 1; \ |
| _mb_id >= _vm->first_mb_id && _vm->nb_mb_state[_state]; \ |
| _mb_id--) \ |
| if (virtio_mem_mb_get_state(_vm, _mb_id) == _state) |
| |
| /* |
| * Mark all selected subblocks plugged. |
| * |
| * Will not modify the state of the memory block. |
| */ |
| static void virtio_mem_mb_set_sb_plugged(struct virtio_mem *vm, |
| unsigned long mb_id, int sb_id, |
| int count) |
| { |
| const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; |
| |
| __bitmap_set(vm->sb_bitmap, bit, count); |
| } |
| |
| /* |
| * Mark all selected subblocks unplugged. |
| * |
| * Will not modify the state of the memory block. |
| */ |
| static void virtio_mem_mb_set_sb_unplugged(struct virtio_mem *vm, |
| unsigned long mb_id, int sb_id, |
| int count) |
| { |
| const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; |
| |
| __bitmap_clear(vm->sb_bitmap, bit, count); |
| } |
| |
| /* |
| * Test if all selected subblocks are plugged. |
| */ |
| static bool virtio_mem_mb_test_sb_plugged(struct virtio_mem *vm, |
| unsigned long mb_id, int sb_id, |
| int count) |
| { |
| const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; |
| |
| if (count == 1) |
| return test_bit(bit, vm->sb_bitmap); |
| |
| /* TODO: Helper similar to bitmap_set() */ |
| return find_next_zero_bit(vm->sb_bitmap, bit + count, bit) >= |
| bit + count; |
| } |
| |
| /* |
| * Test if all selected subblocks are unplugged. |
| */ |
| static bool virtio_mem_mb_test_sb_unplugged(struct virtio_mem *vm, |
| unsigned long mb_id, int sb_id, |
| int count) |
| { |
| const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id; |
| |
| /* TODO: Helper similar to bitmap_set() */ |
| return find_next_bit(vm->sb_bitmap, bit + count, bit) >= bit + count; |
| } |
| |
| /* |
| * Find the first unplugged subblock. Returns vm->nb_sb_per_mb in case there is |
| * none. |
| */ |
| static int virtio_mem_mb_first_unplugged_sb(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb; |
| |
| return find_next_zero_bit(vm->sb_bitmap, bit + vm->nb_sb_per_mb, bit) - |
| bit; |
| } |
| |
| /* |
| * Prepare the subblock bitmap for the next memory block. |
| */ |
| static int virtio_mem_sb_bitmap_prepare_next_mb(struct virtio_mem *vm) |
| { |
| const unsigned long old_nb_mb = vm->next_mb_id - vm->first_mb_id; |
| const unsigned long old_nb_bits = old_nb_mb * vm->nb_sb_per_mb; |
| const unsigned long new_nb_bits = (old_nb_mb + 1) * vm->nb_sb_per_mb; |
| int old_pages = PFN_UP(BITS_TO_LONGS(old_nb_bits) * sizeof(long)); |
| int new_pages = PFN_UP(BITS_TO_LONGS(new_nb_bits) * sizeof(long)); |
| unsigned long *new_sb_bitmap, *old_sb_bitmap; |
| |
| if (vm->sb_bitmap && old_pages == new_pages) |
| return 0; |
| |
| new_sb_bitmap = vzalloc(new_pages * PAGE_SIZE); |
| if (!new_sb_bitmap) |
| return -ENOMEM; |
| |
| mutex_lock(&vm->hotplug_mutex); |
| if (new_sb_bitmap) |
| memcpy(new_sb_bitmap, vm->sb_bitmap, old_pages * PAGE_SIZE); |
| |
| old_sb_bitmap = vm->sb_bitmap; |
| vm->sb_bitmap = new_sb_bitmap; |
| mutex_unlock(&vm->hotplug_mutex); |
| |
| vfree(old_sb_bitmap); |
| return 0; |
| } |
| |
| /* |
| * Try to add a memory block to Linux. This will usually only fail |
| * if out of memory. |
| * |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with |
| * onlining code). |
| * |
| * Will not modify the state of the memory block. |
| */ |
| static int virtio_mem_mb_add(struct virtio_mem *vm, unsigned long mb_id) |
| { |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); |
| int nid = vm->nid; |
| |
| if (nid == NUMA_NO_NODE) |
| nid = memory_add_physaddr_to_nid(addr); |
| |
| /* |
| * When force-unloading the driver and we still have memory added to |
| * Linux, the resource name has to stay. |
| */ |
| if (!vm->resource_name) { |
| vm->resource_name = kstrdup_const("System RAM (virtio_mem)", |
| GFP_KERNEL); |
| if (!vm->resource_name) |
| return -ENOMEM; |
| } |
| |
| dev_dbg(&vm->vdev->dev, "adding memory block: %lu\n", mb_id); |
| return add_memory_driver_managed(nid, addr, memory_block_size_bytes(), |
| vm->resource_name, |
| MEMHP_MERGE_RESOURCE); |
| } |
| |
| /* |
| * Try to remove a memory block from Linux. Will only fail if the memory block |
| * is not offline. |
| * |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with |
| * onlining code). |
| * |
| * Will not modify the state of the memory block. |
| */ |
| static int virtio_mem_mb_remove(struct virtio_mem *vm, unsigned long mb_id) |
| { |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); |
| int nid = vm->nid; |
| |
| if (nid == NUMA_NO_NODE) |
| nid = memory_add_physaddr_to_nid(addr); |
| |
| dev_dbg(&vm->vdev->dev, "removing memory block: %lu\n", mb_id); |
| return remove_memory(nid, addr, memory_block_size_bytes()); |
| } |
| |
| /* |
| * Try to offline and remove a memory block from Linux. |
| * |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with |
| * onlining code). |
| * |
| * Will not modify the state of the memory block. |
| */ |
| static int virtio_mem_mb_offline_and_remove(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); |
| int nid = vm->nid; |
| |
| if (nid == NUMA_NO_NODE) |
| nid = memory_add_physaddr_to_nid(addr); |
| |
| dev_dbg(&vm->vdev->dev, "offlining and removing memory block: %lu\n", |
| mb_id); |
| return offline_and_remove_memory(nid, addr, memory_block_size_bytes()); |
| } |
| |
| /* |
| * Trigger the workqueue so the device can perform its magic. |
| */ |
| static void virtio_mem_retry(struct virtio_mem *vm) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&vm->removal_lock, flags); |
| if (!vm->removing) |
| queue_work(system_freezable_wq, &vm->wq); |
| spin_unlock_irqrestore(&vm->removal_lock, flags); |
| } |
| |
| static int virtio_mem_translate_node_id(struct virtio_mem *vm, uint16_t node_id) |
| { |
| int node = NUMA_NO_NODE; |
| |
| #if defined(CONFIG_ACPI_NUMA) |
| if (virtio_has_feature(vm->vdev, VIRTIO_MEM_F_ACPI_PXM)) |
| node = pxm_to_node(node_id); |
| #endif |
| return node; |
| } |
| |
| /* |
| * Test if a virtio-mem device overlaps with the given range. Can be called |
| * from (notifier) callbacks lockless. |
| */ |
| static bool virtio_mem_overlaps_range(struct virtio_mem *vm, |
| unsigned long start, unsigned long size) |
| { |
| unsigned long dev_start = virtio_mem_mb_id_to_phys(vm->first_mb_id); |
| unsigned long dev_end = virtio_mem_mb_id_to_phys(vm->last_mb_id) + |
| memory_block_size_bytes(); |
| |
| return start < dev_end && dev_start < start + size; |
| } |
| |
| /* |
| * Test if a virtio-mem device owns a memory block. Can be called from |
| * (notifier) callbacks lockless. |
| */ |
| static bool virtio_mem_owned_mb(struct virtio_mem *vm, unsigned long mb_id) |
| { |
| return mb_id >= vm->first_mb_id && mb_id <= vm->last_mb_id; |
| } |
| |
| static int virtio_mem_notify_going_online(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| switch (virtio_mem_mb_get_state(vm, mb_id)) { |
| case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL: |
| case VIRTIO_MEM_MB_STATE_OFFLINE: |
| return NOTIFY_OK; |
| default: |
| break; |
| } |
| dev_warn_ratelimited(&vm->vdev->dev, |
| "memory block onlining denied\n"); |
| return NOTIFY_BAD; |
| } |
| |
| static void virtio_mem_notify_offline(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| switch (virtio_mem_mb_get_state(vm, mb_id)) { |
| case VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL: |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); |
| break; |
| case VIRTIO_MEM_MB_STATE_ONLINE: |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE); |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| |
| /* |
| * Trigger the workqueue, maybe we can now unplug memory. Also, |
| * when we offline and remove a memory block, this will re-trigger |
| * us immediately - which is often nice because the removal of |
| * the memory block (e.g., memmap) might have freed up memory |
| * on other memory blocks we manage. |
| */ |
| virtio_mem_retry(vm); |
| } |
| |
| static void virtio_mem_notify_online(struct virtio_mem *vm, unsigned long mb_id) |
| { |
| unsigned long nb_offline; |
| |
| switch (virtio_mem_mb_get_state(vm, mb_id)) { |
| case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL: |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL); |
| break; |
| case VIRTIO_MEM_MB_STATE_OFFLINE: |
| virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_ONLINE); |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] + |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL]; |
| |
| /* see if we can add new blocks now that we onlined one block */ |
| if (nb_offline == VIRTIO_MEM_NB_OFFLINE_THRESHOLD - 1) |
| virtio_mem_retry(vm); |
| } |
| |
| static void virtio_mem_notify_going_offline(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| const unsigned long nr_pages = PFN_DOWN(vm->subblock_size); |
| struct page *page; |
| unsigned long pfn; |
| int sb_id, i; |
| |
| for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) { |
| if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) |
| continue; |
| /* |
| * Drop our reference to the pages so the memory can get |
| * offlined and add the unplugged pages to the managed |
| * page counters (so offlining code can correctly subtract |
| * them again). |
| */ |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size); |
| adjust_managed_page_count(pfn_to_page(pfn), nr_pages); |
| for (i = 0; i < nr_pages; i++) { |
| page = pfn_to_page(pfn + i); |
| if (WARN_ON(!page_ref_dec_and_test(page))) |
| dump_page(page, "unplugged page referenced"); |
| } |
| } |
| } |
| |
| static void virtio_mem_notify_cancel_offline(struct virtio_mem *vm, |
| unsigned long mb_id) |
| { |
| const unsigned long nr_pages = PFN_DOWN(vm->subblock_size); |
| unsigned long pfn; |
| int sb_id, i; |
| |
| for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) { |
| if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) |
| continue; |
| /* |
| * Get the reference we dropped when going offline and |
| * subtract the unplugged pages from the managed page |
| * counters. |
| */ |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size); |
| adjust_managed_page_count(pfn_to_page(pfn), -nr_pages); |
| for (i = 0; i < nr_pages; i++) |
| page_ref_inc(pfn_to_page(pfn + i)); |
| } |
| } |
| |
| /* |
| * This callback will either be called synchronously from add_memory() or |
| * asynchronously (e.g., triggered via user space). We have to be careful |
| * with locking when calling add_memory(). |
| */ |
| static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, |
| unsigned long action, void *arg) |
| { |
| struct virtio_mem *vm = container_of(nb, struct virtio_mem, |
| memory_notifier); |
| struct memory_notify *mhp = arg; |
| const unsigned long start = PFN_PHYS(mhp->start_pfn); |
| const unsigned long size = PFN_PHYS(mhp->nr_pages); |
| const unsigned long mb_id = virtio_mem_phys_to_mb_id(start); |
| int rc = NOTIFY_OK; |
| |
| if (!virtio_mem_overlaps_range(vm, start, size)) |
| return NOTIFY_DONE; |
| |
| /* |
| * Memory is onlined/offlined in memory block granularity. We cannot |
| * cross virtio-mem device boundaries and memory block boundaries. Bail |
| * out if this ever changes. |
| */ |
| if (WARN_ON_ONCE(size != memory_block_size_bytes() || |
| !IS_ALIGNED(start, memory_block_size_bytes()))) |
| return NOTIFY_BAD; |
| |
| /* |
| * Avoid circular locking lockdep warnings. We lock the mutex |
| * e.g., in MEM_GOING_ONLINE and unlock it in MEM_ONLINE. The |
| * blocking_notifier_call_chain() has it's own lock, which gets unlocked |
| * between both notifier calls and will bail out. False positive. |
| */ |
| lockdep_off(); |
| |
| switch (action) { |
| case MEM_GOING_OFFLINE: |
| mutex_lock(&vm->hotplug_mutex); |
| if (vm->removing) { |
| rc = notifier_from_errno(-EBUSY); |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| } |
| vm->hotplug_active = true; |
| virtio_mem_notify_going_offline(vm, mb_id); |
| break; |
| case MEM_GOING_ONLINE: |
| mutex_lock(&vm->hotplug_mutex); |
| if (vm->removing) { |
| rc = notifier_from_errno(-EBUSY); |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| } |
| vm->hotplug_active = true; |
| rc = virtio_mem_notify_going_online(vm, mb_id); |
| break; |
| case MEM_OFFLINE: |
| virtio_mem_notify_offline(vm, mb_id); |
| vm->hotplug_active = false; |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| case MEM_ONLINE: |
| virtio_mem_notify_online(vm, mb_id); |
| vm->hotplug_active = false; |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| case MEM_CANCEL_OFFLINE: |
| if (!vm->hotplug_active) |
| break; |
| virtio_mem_notify_cancel_offline(vm, mb_id); |
| vm->hotplug_active = false; |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| case MEM_CANCEL_ONLINE: |
| if (!vm->hotplug_active) |
| break; |
| vm->hotplug_active = false; |
| mutex_unlock(&vm->hotplug_mutex); |
| break; |
| default: |
| break; |
| } |
| |
| lockdep_on(); |
| |
| return rc; |
| } |
| |
| /* |
| * Set a range of pages PG_offline. Remember pages that were never onlined |
| * (via generic_online_page()) using PageDirty(). |
| */ |
| static void virtio_mem_set_fake_offline(unsigned long pfn, |
| unsigned int nr_pages, bool onlined) |
| { |
| for (; nr_pages--; pfn++) { |
| struct page *page = pfn_to_page(pfn); |
| |
| __SetPageOffline(page); |
| if (!onlined) { |
| SetPageDirty(page); |
| /* FIXME: remove after cleanups */ |
| ClearPageReserved(page); |
| } |
| } |
| } |
| |
| /* |
| * Clear PG_offline from a range of pages. If the pages were never onlined, |
| * (via generic_online_page()), clear PageDirty(). |
| */ |
| static void virtio_mem_clear_fake_offline(unsigned long pfn, |
| unsigned int nr_pages, bool onlined) |
| { |
| for (; nr_pages--; pfn++) { |
| struct page *page = pfn_to_page(pfn); |
| |
| __ClearPageOffline(page); |
| if (!onlined) |
| ClearPageDirty(page); |
| } |
| } |
| |
| /* |
| * Release a range of fake-offline pages to the buddy, effectively |
| * fake-onlining them. |
| */ |
| static void virtio_mem_fake_online(unsigned long pfn, unsigned int nr_pages) |
| { |
| const int order = MAX_ORDER - 1; |
| int i; |
| |
| /* |
| * We are always called with subblock granularity, which is at least |
| * aligned to MAX_ORDER - 1. |
| */ |
| for (i = 0; i < nr_pages; i += 1 << order) { |
| struct page *page = pfn_to_page(pfn + i); |
| |
| /* |
| * If the page is PageDirty(), it was kept fake-offline when |
| * onlining the memory block. Otherwise, it was allocated |
| * using alloc_contig_range(). All pages in a subblock are |
| * alike. |
| */ |
| if (PageDirty(page)) { |
| virtio_mem_clear_fake_offline(pfn + i, 1 << order, |
| false); |
| generic_online_page(page, order); |
| } else { |
| virtio_mem_clear_fake_offline(pfn + i, 1 << order, |
| true); |
| free_contig_range(pfn + i, 1 << order); |
| adjust_managed_page_count(page, 1 << order); |
| } |
| } |
| } |
| |
| static void virtio_mem_online_page_cb(struct page *page, unsigned int order) |
| { |
| const unsigned long addr = page_to_phys(page); |
| const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr); |
| struct virtio_mem *vm; |
| int sb_id; |
| |
| /* |
| * We exploit here that subblocks have at least MAX_ORDER - 1 |
| * size/alignment and that this callback is is called with such a |
| * size/alignment. So we cannot cross subblocks and therefore |
| * also not memory blocks. |
| */ |
| rcu_read_lock(); |
| list_for_each_entry_rcu(vm, &virtio_mem_devices, next) { |
| if (!virtio_mem_owned_mb(vm, mb_id)) |
| continue; |
| |
| sb_id = virtio_mem_phys_to_sb_id(vm, addr); |
| /* |
| * If plugged, online the pages, otherwise, set them fake |
| * offline (PageOffline). |
| */ |
| if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) |
| generic_online_page(page, order); |
| else |
| virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order, |
| false); |
| rcu_read_unlock(); |
| return; |
| } |
| rcu_read_unlock(); |
| |
| /* not virtio-mem memory, but e.g., a DIMM. online it */ |
| generic_online_page(page, order); |
| } |
| |
| static uint64_t virtio_mem_send_request(struct virtio_mem *vm, |
| const struct virtio_mem_req *req) |
| { |
| struct scatterlist *sgs[2], sg_req, sg_resp; |
| unsigned int len; |
| int rc; |
| |
| /* don't use the request residing on the stack (vaddr) */ |
| vm->req = *req; |
| |
| /* out: buffer for request */ |
| sg_init_one(&sg_req, &vm->req, sizeof(vm->req)); |
| sgs[0] = &sg_req; |
| |
| /* in: buffer for response */ |
| sg_init_one(&sg_resp, &vm->resp, sizeof(vm->resp)); |
| sgs[1] = &sg_resp; |
| |
| rc = virtqueue_add_sgs(vm->vq, sgs, 1, 1, vm, GFP_KERNEL); |
| if (rc < 0) |
| return rc; |
| |
| virtqueue_kick(vm->vq); |
| |
| /* wait for a response */ |
| wait_event(vm->host_resp, virtqueue_get_buf(vm->vq, &len)); |
| |
| return virtio16_to_cpu(vm->vdev, vm->resp.type); |
| } |
| |
| static int virtio_mem_send_plug_request(struct virtio_mem *vm, uint64_t addr, |
| uint64_t size) |
| { |
| const uint64_t nb_vm_blocks = size / vm->device_block_size; |
| const struct virtio_mem_req req = { |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_PLUG), |
| .u.plug.addr = cpu_to_virtio64(vm->vdev, addr), |
| .u.plug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), |
| }; |
| |
| if (atomic_read(&vm->config_changed)) |
| return -EAGAIN; |
| |
| switch (virtio_mem_send_request(vm, &req)) { |
| case VIRTIO_MEM_RESP_ACK: |
| vm->plugged_size += size; |
| return 0; |
| case VIRTIO_MEM_RESP_NACK: |
| return -EAGAIN; |
| case VIRTIO_MEM_RESP_BUSY: |
| return -ETXTBSY; |
| case VIRTIO_MEM_RESP_ERROR: |
| return -EINVAL; |
| default: |
| return -ENOMEM; |
| } |
| } |
| |
| static int virtio_mem_send_unplug_request(struct virtio_mem *vm, uint64_t addr, |
| uint64_t size) |
| { |
| const uint64_t nb_vm_blocks = size / vm->device_block_size; |
| const struct virtio_mem_req req = { |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG), |
| .u.unplug.addr = cpu_to_virtio64(vm->vdev, addr), |
| .u.unplug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), |
| }; |
| |
| if (atomic_read(&vm->config_changed)) |
| return -EAGAIN; |
| |
| switch (virtio_mem_send_request(vm, &req)) { |
| case VIRTIO_MEM_RESP_ACK: |
| vm->plugged_size -= size; |
| return 0; |
| case VIRTIO_MEM_RESP_BUSY: |
| return -ETXTBSY; |
| case VIRTIO_MEM_RESP_ERROR: |
| return -EINVAL; |
| default: |
| return -ENOMEM; |
| } |
| } |
| |
| static int virtio_mem_send_unplug_all_request(struct virtio_mem *vm) |
| { |
| const struct virtio_mem_req req = { |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG_ALL), |
| }; |
| |
| switch (virtio_mem_send_request(vm, &req)) { |
| case VIRTIO_MEM_RESP_ACK: |
| vm->unplug_all_required = false; |
| vm->plugged_size = 0; |
| /* usable region might have shrunk */ |
| atomic_set(&vm->config_changed, 1); |
| return 0; |
| case VIRTIO_MEM_RESP_BUSY: |
| return -ETXTBSY; |
| default: |
| return -ENOMEM; |
| } |
| } |
| |
| /* |
| * Plug selected subblocks. Updates the plugged state, but not the state |
| * of the memory block. |
| */ |
| static int virtio_mem_mb_plug_sb(struct virtio_mem *vm, unsigned long mb_id, |
| int sb_id, int count) |
| { |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size; |
| const uint64_t size = count * vm->subblock_size; |
| int rc; |
| |
| dev_dbg(&vm->vdev->dev, "plugging memory block: %lu : %i - %i\n", mb_id, |
| sb_id, sb_id + count - 1); |
| |
| rc = virtio_mem_send_plug_request(vm, addr, size); |
| if (!rc) |
| virtio_mem_mb_set_sb_plugged(vm, mb_id, sb_id, count); |
| return rc; |
| } |
| |
| /* |
| * Unplug selected subblocks. Updates the plugged state, but not the state |
| * of the memory block. |
| */ |
| static int virtio_mem_mb_unplug_sb(struct virtio_mem *vm, unsigned long mb_id, |
| int sb_id, int count) |
| { |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size; |
| const uint64_t size = count * vm->subblock_size; |
| int rc; |
| |
| dev_dbg(&vm->vdev->dev, "unplugging memory block: %lu : %i - %i\n", |
| mb_id, sb_id, sb_id + count - 1); |
| |
| rc = virtio_mem_send_unplug_request(vm, addr, size); |
| if (!rc) |
| virtio_mem_mb_set_sb_unplugged(vm, mb_id, sb_id, count); |
| return rc; |
| } |
| |
| /* |
| * Unplug the desired number of plugged subblocks of a offline or not-added |
| * memory block. Will fail if any subblock cannot get unplugged (instead of |
| * skipping it). |
| * |
| * Will not modify the state of the memory block. |
| * |
| * Note: can fail after some subblocks were unplugged. |
| */ |
| static int virtio_mem_mb_unplug_any_sb(struct virtio_mem *vm, |
| unsigned long mb_id, uint64_t *nb_sb) |
| { |
| int sb_id, count; |
| int rc; |
| |
| sb_id = vm->nb_sb_per_mb - 1; |
| while (*nb_sb) { |
| /* Find the next candidate subblock */ |
| while (sb_id >= 0 && |
| virtio_mem_mb_test_sb_unplugged(vm, mb_id, sb_id, 1)) |
| sb_id--; |
| if (sb_id < 0) |
| break; |
| /* Try to unplug multiple subblocks at a time */ |
| count = 1; |
| while (count < *nb_sb && sb_id > 0 && |
| virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id - 1, 1)) { |
| count++; |
| sb_id--; |
| } |
| |
| rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, count); |
| if (rc) |
| return rc; |
| *nb_sb -= count; |
| sb_id--; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Unplug all plugged subblocks of an offline or not-added memory block. |
| * |
| * Will not modify the state of the memory block. |
| * |
| * Note: can fail after some subblocks were unplugged. |
| */ |
| static int virtio_mem_mb_unplug(struct virtio_mem *vm, unsigned long mb_id) |
| { |
| uint64_t nb_sb = vm->nb_sb_per_mb; |
| |
| return virtio_mem_mb_unplug_any_sb(vm, mb_id, &nb_sb); |
| } |
| |
| /* |
| * Prepare tracking data for the next memory block. |
| */ |
| static int virtio_mem_prepare_next_mb(struct virtio_mem *vm, |
| unsigned long *mb_id) |
| { |
| int rc; |
| |
| if (vm->next_mb_id > vm->last_usable_mb_id) |
| return -ENOSPC; |
| |
| /* Resize the state array if required. */ |
| rc = virtio_mem_mb_state_prepare_next_mb(vm); |
| if (rc) |
| return rc; |
| |
| /* Resize the subblock bitmap if required. */ |
| rc = virtio_mem_sb_bitmap_prepare_next_mb(vm); |
| if (rc) |
| return rc; |
| |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_UNUSED]++; |
| *mb_id = vm->next_mb_id++; |
| return 0; |
| } |
| |
| /* |
| * Don't add too many blocks that are not onlined yet to avoid running OOM. |
| */ |
| static bool virtio_mem_too_many_mb_offline(struct virtio_mem *vm) |
| { |
| unsigned long nb_offline; |
| |
| nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] + |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL]; |
| return nb_offline >= VIRTIO_MEM_NB_OFFLINE_THRESHOLD; |
| } |
| |
| /* |
| * Try to plug the desired number of subblocks and add the memory block |
| * to Linux. |
| * |
| * Will modify the state of the memory block. |
| */ |
| static int virtio_mem_mb_plug_and_add(struct virtio_mem *vm, |
| unsigned long mb_id, |
| uint64_t *nb_sb) |
| { |
| const int count = min_t(int, *nb_sb, vm->nb_sb_per_mb); |
| int rc, rc2; |
| |
| if (WARN_ON_ONCE(!count)) |
| return -EINVAL; |
| |
| /* |
| * Plug the requested number of subblocks before adding it to linux, |
| * so that onlining will directly online all plugged subblocks. |
| */ |
| rc = virtio_mem_mb_plug_sb(vm, mb_id, 0, count); |
| if (rc) |
| return rc; |
| |
| /* |
| * Mark the block properly offline before adding it to Linux, |
| * so the memory notifiers will find the block in the right state. |
| */ |
| if (count == vm->nb_sb_per_mb) |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE); |
| else |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); |
| |
| /* Add the memory block to linux - if that fails, try to unplug. */ |
| rc = virtio_mem_mb_add(vm, mb_id); |
| if (rc) { |
| enum virtio_mem_mb_state new_state = VIRTIO_MEM_MB_STATE_UNUSED; |
| |
| dev_err(&vm->vdev->dev, |
| "adding memory block %lu failed with %d\n", mb_id, rc); |
| rc2 = virtio_mem_mb_unplug_sb(vm, mb_id, 0, count); |
| |
| /* |
| * TODO: Linux MM does not properly clean up yet in all cases |
| * where adding of memory failed - especially on -ENOMEM. |
| */ |
| if (rc2) |
| new_state = VIRTIO_MEM_MB_STATE_PLUGGED; |
| virtio_mem_mb_set_state(vm, mb_id, new_state); |
| return rc; |
| } |
| |
| *nb_sb -= count; |
| return 0; |
| } |
| |
| /* |
| * Try to plug the desired number of subblocks of a memory block that |
| * is already added to Linux. |
| * |
| * Will modify the state of the memory block. |
| * |
| * Note: Can fail after some subblocks were successfully plugged. |
| */ |
| static int virtio_mem_mb_plug_any_sb(struct virtio_mem *vm, unsigned long mb_id, |
| uint64_t *nb_sb, bool online) |
| { |
| unsigned long pfn, nr_pages; |
| int sb_id, count; |
| int rc; |
| |
| if (WARN_ON_ONCE(!*nb_sb)) |
| return -EINVAL; |
| |
| while (*nb_sb) { |
| sb_id = virtio_mem_mb_first_unplugged_sb(vm, mb_id); |
| if (sb_id >= vm->nb_sb_per_mb) |
| break; |
| count = 1; |
| while (count < *nb_sb && |
| sb_id + count < vm->nb_sb_per_mb && |
| !virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id + count, |
| 1)) |
| count++; |
| |
| rc = virtio_mem_mb_plug_sb(vm, mb_id, sb_id, count); |
| if (rc) |
| return rc; |
| *nb_sb -= count; |
| if (!online) |
| continue; |
| |
| /* fake-online the pages if the memory block is online */ |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size); |
| nr_pages = PFN_DOWN(count * vm->subblock_size); |
| virtio_mem_fake_online(pfn, nr_pages); |
| } |
| |
| if (virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { |
| if (online) |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE); |
| else |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Try to plug the requested amount of memory. |
| */ |
| static int virtio_mem_plug_request(struct virtio_mem *vm, uint64_t diff) |
| { |
| uint64_t nb_sb = diff / vm->subblock_size; |
| unsigned long mb_id; |
| int rc; |
| |
| if (!nb_sb) |
| return 0; |
| |
| /* Don't race with onlining/offlining */ |
| mutex_lock(&vm->hotplug_mutex); |
| |
| /* Try to plug subblocks of partially plugged online blocks. */ |
| virtio_mem_for_each_mb_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) { |
| rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, true); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| cond_resched(); |
| } |
| |
| /* Try to plug subblocks of partially plugged offline blocks. */ |
| virtio_mem_for_each_mb_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { |
| rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, false); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| cond_resched(); |
| } |
| |
| /* |
| * We won't be working on online/offline memory blocks from this point, |
| * so we can't race with memory onlining/offlining. Drop the mutex. |
| */ |
| mutex_unlock(&vm->hotplug_mutex); |
| |
| /* Try to plug and add unused blocks */ |
| virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED) { |
| if (virtio_mem_too_many_mb_offline(vm)) |
| return -ENOSPC; |
| |
| rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb); |
| if (rc || !nb_sb) |
| return rc; |
| cond_resched(); |
| } |
| |
| /* Try to prepare, plug and add new blocks */ |
| while (nb_sb) { |
| if (virtio_mem_too_many_mb_offline(vm)) |
| return -ENOSPC; |
| |
| rc = virtio_mem_prepare_next_mb(vm, &mb_id); |
| if (rc) |
| return rc; |
| rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb); |
| if (rc) |
| return rc; |
| cond_resched(); |
| } |
| |
| return 0; |
| out_unlock: |
| mutex_unlock(&vm->hotplug_mutex); |
| return rc; |
| } |
| |
| /* |
| * Unplug the desired number of plugged subblocks of an offline memory block. |
| * Will fail if any subblock cannot get unplugged (instead of skipping it). |
| * |
| * Will modify the state of the memory block. Might temporarily drop the |
| * hotplug_mutex. |
| * |
| * Note: Can fail after some subblocks were successfully unplugged. |
| */ |
| static int virtio_mem_mb_unplug_any_sb_offline(struct virtio_mem *vm, |
| unsigned long mb_id, |
| uint64_t *nb_sb) |
| { |
| int rc; |
| |
| rc = virtio_mem_mb_unplug_any_sb(vm, mb_id, nb_sb); |
| |
| /* some subblocks might have been unplugged even on failure */ |
| if (!virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL); |
| if (rc) |
| return rc; |
| |
| if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { |
| /* |
| * Remove the block from Linux - this should never fail. |
| * Hinder the block from getting onlined by marking it |
| * unplugged. Temporarily drop the mutex, so |
| * any pending GOING_ONLINE requests can be serviced/rejected. |
| */ |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_UNUSED); |
| |
| mutex_unlock(&vm->hotplug_mutex); |
| rc = virtio_mem_mb_remove(vm, mb_id); |
| BUG_ON(rc); |
| mutex_lock(&vm->hotplug_mutex); |
| } |
| return 0; |
| } |
| |
| /* |
| * Unplug the given plugged subblocks of an online memory block. |
| * |
| * Will modify the state of the memory block. |
| */ |
| static int virtio_mem_mb_unplug_sb_online(struct virtio_mem *vm, |
| unsigned long mb_id, int sb_id, |
| int count) |
| { |
| const unsigned long nr_pages = PFN_DOWN(vm->subblock_size) * count; |
| unsigned long start_pfn; |
| int rc; |
| |
| start_pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + |
| sb_id * vm->subblock_size); |
| rc = alloc_contig_range(start_pfn, start_pfn + nr_pages, |
| MIGRATE_MOVABLE, GFP_KERNEL); |
| if (rc == -ENOMEM) |
| /* whoops, out of memory */ |
| return rc; |
| if (rc) |
| return -EBUSY; |
| |
| /* Mark it as fake-offline before unplugging it */ |
| virtio_mem_set_fake_offline(start_pfn, nr_pages, true); |
| adjust_managed_page_count(pfn_to_page(start_pfn), -nr_pages); |
| |
| /* Try to unplug the allocated memory */ |
| rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, count); |
| if (rc) { |
| /* Return the memory to the buddy. */ |
| virtio_mem_fake_online(start_pfn, nr_pages); |
| return rc; |
| } |
| |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL); |
| return 0; |
| } |
| |
| /* |
| * Unplug the desired number of plugged subblocks of an online memory block. |
| * Will skip subblock that are busy. |
| * |
| * Will modify the state of the memory block. Might temporarily drop the |
| * hotplug_mutex. |
| * |
| * Note: Can fail after some subblocks were successfully unplugged. Can |
| * return 0 even if subblocks were busy and could not get unplugged. |
| */ |
| static int virtio_mem_mb_unplug_any_sb_online(struct virtio_mem *vm, |
| unsigned long mb_id, |
| uint64_t *nb_sb) |
| { |
| int rc, sb_id; |
| |
| /* If possible, try to unplug the complete block in one shot. */ |
| if (*nb_sb >= vm->nb_sb_per_mb && |
| virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { |
| rc = virtio_mem_mb_unplug_sb_online(vm, mb_id, 0, |
| vm->nb_sb_per_mb); |
| if (!rc) { |
| *nb_sb -= vm->nb_sb_per_mb; |
| goto unplugged; |
| } else if (rc != -EBUSY) |
| return rc; |
| } |
| |
| /* Fallback to single subblocks. */ |
| for (sb_id = vm->nb_sb_per_mb - 1; sb_id >= 0 && *nb_sb; sb_id--) { |
| /* Find the next candidate subblock */ |
| while (sb_id >= 0 && |
| !virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1)) |
| sb_id--; |
| if (sb_id < 0) |
| break; |
| |
| rc = virtio_mem_mb_unplug_sb_online(vm, mb_id, sb_id, 1); |
| if (rc == -EBUSY) |
| continue; |
| else if (rc) |
| return rc; |
| *nb_sb -= 1; |
| } |
| |
| unplugged: |
| /* |
| * Once all subblocks of a memory block were unplugged, offline and |
| * remove it. This will usually not fail, as no memory is in use |
| * anymore - however some other notifiers might NACK the request. |
| */ |
| if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) { |
| mutex_unlock(&vm->hotplug_mutex); |
| rc = virtio_mem_mb_offline_and_remove(vm, mb_id); |
| mutex_lock(&vm->hotplug_mutex); |
| if (!rc) |
| virtio_mem_mb_set_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_UNUSED); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Try to unplug the requested amount of memory. |
| */ |
| static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) |
| { |
| uint64_t nb_sb = diff / vm->subblock_size; |
| unsigned long mb_id; |
| int rc; |
| |
| if (!nb_sb) |
| return 0; |
| |
| /* |
| * We'll drop the mutex a couple of times when it is safe to do so. |
| * This might result in some blocks switching the state (online/offline) |
| * and we could miss them in this run - we will retry again later. |
| */ |
| mutex_lock(&vm->hotplug_mutex); |
| |
| /* Try to unplug subblocks of partially plugged offline blocks. */ |
| virtio_mem_for_each_mb_state_rev(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { |
| rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id, |
| &nb_sb); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| cond_resched(); |
| } |
| |
| /* Try to unplug subblocks of plugged offline blocks. */ |
| virtio_mem_for_each_mb_state_rev(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE) { |
| rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id, |
| &nb_sb); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| cond_resched(); |
| } |
| |
| if (!unplug_online) { |
| mutex_unlock(&vm->hotplug_mutex); |
| return 0; |
| } |
| |
| /* Try to unplug subblocks of partially plugged online blocks. */ |
| virtio_mem_for_each_mb_state_rev(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) { |
| rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id, |
| &nb_sb); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| mutex_unlock(&vm->hotplug_mutex); |
| cond_resched(); |
| mutex_lock(&vm->hotplug_mutex); |
| } |
| |
| /* Try to unplug subblocks of plugged online blocks. */ |
| virtio_mem_for_each_mb_state_rev(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_ONLINE) { |
| rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id, |
| &nb_sb); |
| if (rc || !nb_sb) |
| goto out_unlock; |
| mutex_unlock(&vm->hotplug_mutex); |
| cond_resched(); |
| mutex_lock(&vm->hotplug_mutex); |
| } |
| |
| mutex_unlock(&vm->hotplug_mutex); |
| return nb_sb ? -EBUSY : 0; |
| out_unlock: |
| mutex_unlock(&vm->hotplug_mutex); |
| return rc; |
| } |
| |
| /* |
| * Try to unplug all blocks that couldn't be unplugged before, for example, |
| * because the hypervisor was busy. |
| */ |
| static int virtio_mem_unplug_pending_mb(struct virtio_mem *vm) |
| { |
| unsigned long mb_id; |
| int rc; |
| |
| virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_PLUGGED) { |
| rc = virtio_mem_mb_unplug(vm, mb_id); |
| if (rc) |
| return rc; |
| virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Update all parts of the config that could have changed. |
| */ |
| static void virtio_mem_refresh_config(struct virtio_mem *vm) |
| { |
| const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS; |
| uint64_t new_plugged_size, usable_region_size, end_addr; |
| |
| /* the plugged_size is just a reflection of what _we_ did previously */ |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, plugged_size, |
| &new_plugged_size); |
| if (WARN_ON_ONCE(new_plugged_size != vm->plugged_size)) |
| vm->plugged_size = new_plugged_size; |
| |
| /* calculate the last usable memory block id */ |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, |
| usable_region_size, &usable_region_size); |
| end_addr = vm->addr + usable_region_size; |
| end_addr = min(end_addr, phys_limit); |
| vm->last_usable_mb_id = virtio_mem_phys_to_mb_id(end_addr) - 1; |
| |
| /* see if there is a request to change the size */ |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, requested_size, |
| &vm->requested_size); |
| |
| dev_info(&vm->vdev->dev, "plugged size: 0x%llx", vm->plugged_size); |
| dev_info(&vm->vdev->dev, "requested size: 0x%llx", vm->requested_size); |
| } |
| |
| /* |
| * Workqueue function for handling plug/unplug requests and config updates. |
| */ |
| static void virtio_mem_run_wq(struct work_struct *work) |
| { |
| struct virtio_mem *vm = container_of(work, struct virtio_mem, wq); |
| uint64_t diff; |
| int rc; |
| |
| hrtimer_cancel(&vm->retry_timer); |
| |
| if (vm->broken) |
| return; |
| |
| retry: |
| rc = 0; |
| |
| /* Make sure we start with a clean state if there are leftovers. */ |
| if (unlikely(vm->unplug_all_required)) |
| rc = virtio_mem_send_unplug_all_request(vm); |
| |
| if (atomic_read(&vm->config_changed)) { |
| atomic_set(&vm->config_changed, 0); |
| virtio_mem_refresh_config(vm); |
| } |
| |
| /* Unplug any leftovers from previous runs */ |
| if (!rc) |
| rc = virtio_mem_unplug_pending_mb(vm); |
| |
| if (!rc && vm->requested_size != vm->plugged_size) { |
| if (vm->requested_size > vm->plugged_size) { |
| diff = vm->requested_size - vm->plugged_size; |
| rc = virtio_mem_plug_request(vm, diff); |
| } else { |
| diff = vm->plugged_size - vm->requested_size; |
| rc = virtio_mem_unplug_request(vm, diff); |
| } |
| } |
| |
| switch (rc) { |
| case 0: |
| vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; |
| break; |
| case -ENOSPC: |
| /* |
| * We cannot add any more memory (alignment, physical limit) |
| * or we have too many offline memory blocks. |
| */ |
| break; |
| case -ETXTBSY: |
| /* |
| * The hypervisor cannot process our request right now |
| * (e.g., out of memory, migrating); |
| */ |
| case -EBUSY: |
| /* |
| * We cannot free up any memory to unplug it (all plugged memory |
| * is busy). |
| */ |
| case -ENOMEM: |
| /* Out of memory, try again later. */ |
| hrtimer_start(&vm->retry_timer, ms_to_ktime(vm->retry_timer_ms), |
| HRTIMER_MODE_REL); |
| break; |
| case -EAGAIN: |
| /* Retry immediately (e.g., the config changed). */ |
| goto retry; |
| default: |
| /* Unknown error, mark as broken */ |
| dev_err(&vm->vdev->dev, |
| "unknown error, marking device broken: %d\n", rc); |
| vm->broken = true; |
| } |
| } |
| |
| static enum hrtimer_restart virtio_mem_timer_expired(struct hrtimer *timer) |
| { |
| struct virtio_mem *vm = container_of(timer, struct virtio_mem, |
| retry_timer); |
| |
| virtio_mem_retry(vm); |
| vm->retry_timer_ms = min_t(unsigned int, vm->retry_timer_ms * 2, |
| VIRTIO_MEM_RETRY_TIMER_MAX_MS); |
| return HRTIMER_NORESTART; |
| } |
| |
| static void virtio_mem_handle_response(struct virtqueue *vq) |
| { |
| struct virtio_mem *vm = vq->vdev->priv; |
| |
| wake_up(&vm->host_resp); |
| } |
| |
| static int virtio_mem_init_vq(struct virtio_mem *vm) |
| { |
| struct virtqueue *vq; |
| |
| vq = virtio_find_single_vq(vm->vdev, virtio_mem_handle_response, |
| "guest-request"); |
| if (IS_ERR(vq)) |
| return PTR_ERR(vq); |
| vm->vq = vq; |
| |
| return 0; |
| } |
| |
| static int virtio_mem_init(struct virtio_mem *vm) |
| { |
| const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS; |
| uint16_t node_id; |
| |
| if (!vm->vdev->config->get) { |
| dev_err(&vm->vdev->dev, "config access disabled\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * We don't want to (un)plug or reuse any memory when in kdump. The |
| * memory is still accessible (but not mapped). |
| */ |
| if (is_kdump_kernel()) { |
| dev_warn(&vm->vdev->dev, "disabled in kdump kernel\n"); |
| return -EBUSY; |
| } |
| |
| /* Fetch all properties that can't change. */ |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, plugged_size, |
| &vm->plugged_size); |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, block_size, |
| &vm->device_block_size); |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, node_id, |
| &node_id); |
| vm->nid = virtio_mem_translate_node_id(vm, node_id); |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, addr, &vm->addr); |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, region_size, |
| &vm->region_size); |
| |
| /* |
| * We always hotplug memory in memory block granularity. This way, |
| * we have to wait for exactly one memory block to online. |
| */ |
| if (vm->device_block_size > memory_block_size_bytes()) { |
| dev_err(&vm->vdev->dev, |
| "The block size is not supported (too big).\n"); |
| return -EINVAL; |
| } |
| |
| /* bad device setup - warn only */ |
| if (!IS_ALIGNED(vm->addr, memory_block_size_bytes())) |
| dev_warn(&vm->vdev->dev, |
| "The alignment of the physical start address can make some memory unusable.\n"); |
| if (!IS_ALIGNED(vm->addr + vm->region_size, memory_block_size_bytes())) |
| dev_warn(&vm->vdev->dev, |
| "The alignment of the physical end address can make some memory unusable.\n"); |
| if (vm->addr + vm->region_size > phys_limit) |
| dev_warn(&vm->vdev->dev, |
| "Some memory is not addressable. This can make some memory unusable.\n"); |
| |
| /* |
| * Calculate the subblock size: |
| * - At least MAX_ORDER - 1 / pageblock_order. |
| * - At least the device block size. |
| * In the worst case, a single subblock per memory block. |
| */ |
| vm->subblock_size = PAGE_SIZE * 1ul << max_t(uint32_t, MAX_ORDER - 1, |
| pageblock_order); |
| vm->subblock_size = max_t(uint64_t, vm->device_block_size, |
| vm->subblock_size); |
| vm->nb_sb_per_mb = memory_block_size_bytes() / vm->subblock_size; |
| |
| /* Round up to the next full memory block */ |
| vm->first_mb_id = virtio_mem_phys_to_mb_id(vm->addr - 1 + |
| memory_block_size_bytes()); |
| vm->next_mb_id = vm->first_mb_id; |
| vm->last_mb_id = virtio_mem_phys_to_mb_id(vm->addr + |
| vm->region_size) - 1; |
| |
| dev_info(&vm->vdev->dev, "start address: 0x%llx", vm->addr); |
| dev_info(&vm->vdev->dev, "region size: 0x%llx", vm->region_size); |
| dev_info(&vm->vdev->dev, "device block size: 0x%llx", |
| (unsigned long long)vm->device_block_size); |
| dev_info(&vm->vdev->dev, "memory block size: 0x%lx", |
| memory_block_size_bytes()); |
| dev_info(&vm->vdev->dev, "subblock size: 0x%llx", |
| (unsigned long long)vm->subblock_size); |
| if (vm->nid != NUMA_NO_NODE) |
| dev_info(&vm->vdev->dev, "nid: %d", vm->nid); |
| |
| return 0; |
| } |
| |
| static int virtio_mem_create_resource(struct virtio_mem *vm) |
| { |
| /* |
| * When force-unloading the driver and removing the device, we |
| * could have a garbage pointer. Duplicate the string. |
| */ |
| const char *name = kstrdup(dev_name(&vm->vdev->dev), GFP_KERNEL); |
| |
| if (!name) |
| return -ENOMEM; |
| |
| vm->parent_resource = __request_mem_region(vm->addr, vm->region_size, |
| name, IORESOURCE_SYSTEM_RAM); |
| if (!vm->parent_resource) { |
| kfree(name); |
| dev_warn(&vm->vdev->dev, "could not reserve device region\n"); |
| dev_info(&vm->vdev->dev, |
| "reloading the driver is not supported\n"); |
| return -EBUSY; |
| } |
| |
| /* The memory is not actually busy - make add_memory() work. */ |
| vm->parent_resource->flags &= ~IORESOURCE_BUSY; |
| return 0; |
| } |
| |
| static void virtio_mem_delete_resource(struct virtio_mem *vm) |
| { |
| const char *name; |
| |
| if (!vm->parent_resource) |
| return; |
| |
| name = vm->parent_resource->name; |
| release_resource(vm->parent_resource); |
| kfree(vm->parent_resource); |
| kfree(name); |
| vm->parent_resource = NULL; |
| } |
| |
| static int virtio_mem_probe(struct virtio_device *vdev) |
| { |
| struct virtio_mem *vm; |
| int rc; |
| |
| BUILD_BUG_ON(sizeof(struct virtio_mem_req) != 24); |
| BUILD_BUG_ON(sizeof(struct virtio_mem_resp) != 10); |
| |
| vdev->priv = vm = kzalloc(sizeof(*vm), GFP_KERNEL); |
| if (!vm) |
| return -ENOMEM; |
| |
| init_waitqueue_head(&vm->host_resp); |
| vm->vdev = vdev; |
| INIT_WORK(&vm->wq, virtio_mem_run_wq); |
| mutex_init(&vm->hotplug_mutex); |
| INIT_LIST_HEAD(&vm->next); |
| spin_lock_init(&vm->removal_lock); |
| hrtimer_init(&vm->retry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| vm->retry_timer.function = virtio_mem_timer_expired; |
| vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; |
| |
| /* register the virtqueue */ |
| rc = virtio_mem_init_vq(vm); |
| if (rc) |
| goto out_free_vm; |
| |
| /* initialize the device by querying the config */ |
| rc = virtio_mem_init(vm); |
| if (rc) |
| goto out_del_vq; |
| |
| /* create the parent resource for all memory */ |
| rc = virtio_mem_create_resource(vm); |
| if (rc) |
| goto out_del_vq; |
| |
| /* |
| * If we still have memory plugged, we have to unplug all memory first. |
| * Registering our parent resource makes sure that this memory isn't |
| * actually in use (e.g., trying to reload the driver). |
| */ |
| if (vm->plugged_size) { |
| vm->unplug_all_required = 1; |
| dev_info(&vm->vdev->dev, "unplugging all memory is required\n"); |
| } |
| |
| /* register callbacks */ |
| vm->memory_notifier.notifier_call = virtio_mem_memory_notifier_cb; |
| rc = register_memory_notifier(&vm->memory_notifier); |
| if (rc) |
| goto out_del_resource; |
| rc = register_virtio_mem_device(vm); |
| if (rc) |
| goto out_unreg_mem; |
| |
| virtio_device_ready(vdev); |
| |
| /* trigger a config update to start processing the requested_size */ |
| atomic_set(&vm->config_changed, 1); |
| queue_work(system_freezable_wq, &vm->wq); |
| |
| return 0; |
| out_unreg_mem: |
| unregister_memory_notifier(&vm->memory_notifier); |
| out_del_resource: |
| virtio_mem_delete_resource(vm); |
| out_del_vq: |
| vdev->config->del_vqs(vdev); |
| out_free_vm: |
| kfree(vm); |
| vdev->priv = NULL; |
| |
| return rc; |
| } |
| |
| static void virtio_mem_remove(struct virtio_device *vdev) |
| { |
| struct virtio_mem *vm = vdev->priv; |
| unsigned long mb_id; |
| int rc; |
| |
| /* |
| * Make sure the workqueue won't be triggered anymore and no memory |
| * blocks can be onlined/offlined until we're finished here. |
| */ |
| mutex_lock(&vm->hotplug_mutex); |
| spin_lock_irq(&vm->removal_lock); |
| vm->removing = true; |
| spin_unlock_irq(&vm->removal_lock); |
| mutex_unlock(&vm->hotplug_mutex); |
| |
| /* wait until the workqueue stopped */ |
| cancel_work_sync(&vm->wq); |
| hrtimer_cancel(&vm->retry_timer); |
| |
| /* |
| * After we unregistered our callbacks, user space can online partially |
| * plugged offline blocks. Make sure to remove them. |
| */ |
| virtio_mem_for_each_mb_state(vm, mb_id, |
| VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) { |
| rc = virtio_mem_mb_remove(vm, mb_id); |
| BUG_ON(rc); |
| virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED); |
| } |
| /* |
| * After we unregistered our callbacks, user space can no longer |
| * offline partially plugged online memory blocks. No need to worry |
| * about them. |
| */ |
| |
| /* unregister callbacks */ |
| unregister_virtio_mem_device(vm); |
| unregister_memory_notifier(&vm->memory_notifier); |
| |
| /* |
| * There is no way we could reliably remove all memory we have added to |
| * the system. And there is no way to stop the driver/device from going |
| * away. Warn at least. |
| */ |
| if (vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] || |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL] || |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE] || |
| vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL]) { |
| dev_warn(&vdev->dev, "device still has system memory added\n"); |
| } else { |
| virtio_mem_delete_resource(vm); |
| kfree_const(vm->resource_name); |
| } |
| |
| /* remove all tracking data - no locking needed */ |
| vfree(vm->mb_state); |
| vfree(vm->sb_bitmap); |
| |
| /* reset the device and cleanup the queues */ |
| vdev->config->reset(vdev); |
| vdev->config->del_vqs(vdev); |
| |
| kfree(vm); |
| vdev->priv = NULL; |
| } |
| |
| static void virtio_mem_config_changed(struct virtio_device *vdev) |
| { |
| struct virtio_mem *vm = vdev->priv; |
| |
| atomic_set(&vm->config_changed, 1); |
| virtio_mem_retry(vm); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int virtio_mem_freeze(struct virtio_device *vdev) |
| { |
| /* |
| * When restarting the VM, all memory is usually unplugged. Don't |
| * allow to suspend/hibernate. |
| */ |
| dev_err(&vdev->dev, "save/restore not supported.\n"); |
| return -EPERM; |
| } |
| |
| static int virtio_mem_restore(struct virtio_device *vdev) |
| { |
| return -EPERM; |
| } |
| #endif |
| |
| static unsigned int virtio_mem_features[] = { |
| #if defined(CONFIG_NUMA) && defined(CONFIG_ACPI_NUMA) |
| VIRTIO_MEM_F_ACPI_PXM, |
| #endif |
| }; |
| |
| static const struct virtio_device_id virtio_mem_id_table[] = { |
| { VIRTIO_ID_MEM, VIRTIO_DEV_ANY_ID }, |
| { 0 }, |
| }; |
| |
| static struct virtio_driver virtio_mem_driver = { |
| .feature_table = virtio_mem_features, |
| .feature_table_size = ARRAY_SIZE(virtio_mem_features), |
| .driver.name = KBUILD_MODNAME, |
| .driver.owner = THIS_MODULE, |
| .id_table = virtio_mem_id_table, |
| .probe = virtio_mem_probe, |
| .remove = virtio_mem_remove, |
| .config_changed = virtio_mem_config_changed, |
| #ifdef CONFIG_PM_SLEEP |
| .freeze = virtio_mem_freeze, |
| .restore = virtio_mem_restore, |
| #endif |
| }; |
| |
| module_virtio_driver(virtio_mem_driver); |
| MODULE_DEVICE_TABLE(virtio, virtio_mem_id_table); |
| MODULE_AUTHOR("David Hildenbrand <david@redhat.com>"); |
| MODULE_DESCRIPTION("Virtio-mem driver"); |
| MODULE_LICENSE("GPL"); |