| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for the NXP SAA7164 PCIe bridge |
| * |
| * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com> |
| */ |
| |
| #include "saa7164.h" |
| |
| #define ENCODER_MAX_BITRATE 6500000 |
| #define ENCODER_MIN_BITRATE 1000000 |
| #define ENCODER_DEF_BITRATE 5000000 |
| |
| /* |
| * This is a dummy non-zero value for the sizeimage field of v4l2_pix_format. |
| * It is not actually used for anything since this driver does not support |
| * stream I/O, only read(), and because this driver produces an MPEG stream |
| * and not discrete frames. But the V4L2 spec doesn't allow for this value |
| * to be 0, so set it to 0x10000 instead. |
| * |
| * If we ever change this driver to support stream I/O, then this field |
| * will be the size of the streaming buffers. |
| */ |
| #define SAA7164_SIZEIMAGE (0x10000) |
| |
| static struct saa7164_tvnorm saa7164_tvnorms[] = { |
| { |
| .name = "NTSC-M", |
| .id = V4L2_STD_NTSC_M, |
| }, { |
| .name = "NTSC-JP", |
| .id = V4L2_STD_NTSC_M_JP, |
| } |
| }; |
| |
| /* Take the encoder configuration form the port struct and |
| * flush it to the hardware. |
| */ |
| static void saa7164_encoder_configure(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| port->encoder_params.width = port->width; |
| port->encoder_params.height = port->height; |
| port->encoder_params.is_50hz = |
| (port->encodernorm.id & V4L2_STD_625_50) != 0; |
| |
| /* Set up the DIF (enable it) for analog mode by default */ |
| saa7164_api_initialize_dif(port); |
| |
| /* Configure the correct video standard */ |
| saa7164_api_configure_dif(port, port->encodernorm.id); |
| |
| /* Ensure the audio decoder is correct configured */ |
| saa7164_api_set_audio_std(port); |
| } |
| |
| static int saa7164_encoder_buffers_dealloc(struct saa7164_port *port) |
| { |
| struct list_head *c, *n, *p, *q, *l, *v; |
| struct saa7164_dev *dev = port->dev; |
| struct saa7164_buffer *buf; |
| struct saa7164_user_buffer *ubuf; |
| |
| /* Remove any allocated buffers */ |
| mutex_lock(&port->dmaqueue_lock); |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) dmaqueue\n", __func__, port->nr); |
| list_for_each_safe(c, n, &port->dmaqueue.list) { |
| buf = list_entry(c, struct saa7164_buffer, list); |
| list_del(c); |
| saa7164_buffer_dealloc(buf); |
| } |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) used\n", __func__, port->nr); |
| list_for_each_safe(p, q, &port->list_buf_used.list) { |
| ubuf = list_entry(p, struct saa7164_user_buffer, list); |
| list_del(p); |
| saa7164_buffer_dealloc_user(ubuf); |
| } |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) free\n", __func__, port->nr); |
| list_for_each_safe(l, v, &port->list_buf_free.list) { |
| ubuf = list_entry(l, struct saa7164_user_buffer, list); |
| list_del(l); |
| saa7164_buffer_dealloc_user(ubuf); |
| } |
| |
| mutex_unlock(&port->dmaqueue_lock); |
| dprintk(DBGLVL_ENC, "%s(port=%d) done\n", __func__, port->nr); |
| |
| return 0; |
| } |
| |
| /* Dynamic buffer switch at encoder start time */ |
| static int saa7164_encoder_buffers_alloc(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| struct saa7164_buffer *buf; |
| struct saa7164_user_buffer *ubuf; |
| struct tmHWStreamParameters *params = &port->hw_streamingparams; |
| int result = -ENODEV, i; |
| int len = 0; |
| |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| if (port->encoder_params.stream_type == |
| V4L2_MPEG_STREAM_TYPE_MPEG2_PS) { |
| dprintk(DBGLVL_ENC, |
| "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n", |
| __func__); |
| params->samplesperline = 128; |
| params->numberoflines = 256; |
| params->pitch = 128; |
| params->numpagetables = 2 + |
| ((SAA7164_PS_NUMBER_OF_LINES * 128) / PAGE_SIZE); |
| } else |
| if (port->encoder_params.stream_type == |
| V4L2_MPEG_STREAM_TYPE_MPEG2_TS) { |
| dprintk(DBGLVL_ENC, |
| "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n", |
| __func__); |
| params->samplesperline = 188; |
| params->numberoflines = 312; |
| params->pitch = 188; |
| params->numpagetables = 2 + |
| ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); |
| } else |
| BUG(); |
| |
| /* Init and establish defaults */ |
| params->bitspersample = 8; |
| params->linethreshold = 0; |
| params->pagetablelistvirt = NULL; |
| params->pagetablelistphys = NULL; |
| params->numpagetableentries = port->hwcfg.buffercount; |
| |
| /* Allocate the PCI resources, buffers (hard) */ |
| for (i = 0; i < port->hwcfg.buffercount; i++) { |
| buf = saa7164_buffer_alloc(port, |
| params->numberoflines * |
| params->pitch); |
| |
| if (!buf) { |
| printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", |
| __func__, result); |
| result = -ENOMEM; |
| goto failed; |
| } else { |
| |
| mutex_lock(&port->dmaqueue_lock); |
| list_add_tail(&buf->list, &port->dmaqueue.list); |
| mutex_unlock(&port->dmaqueue_lock); |
| |
| } |
| } |
| |
| /* Allocate some kernel buffers for copying |
| * to userpsace. |
| */ |
| len = params->numberoflines * params->pitch; |
| |
| if (encoder_buffers < 16) |
| encoder_buffers = 16; |
| if (encoder_buffers > 512) |
| encoder_buffers = 512; |
| |
| for (i = 0; i < encoder_buffers; i++) { |
| |
| ubuf = saa7164_buffer_alloc_user(dev, len); |
| if (ubuf) { |
| mutex_lock(&port->dmaqueue_lock); |
| list_add_tail(&ubuf->list, &port->list_buf_free.list); |
| mutex_unlock(&port->dmaqueue_lock); |
| } |
| |
| } |
| |
| result = 0; |
| |
| failed: |
| return result; |
| } |
| |
| static int saa7164_encoder_initialize(struct saa7164_port *port) |
| { |
| saa7164_encoder_configure(port); |
| return 0; |
| } |
| |
| /* -- V4L2 --------------------------------------------------------- */ |
| int saa7164_s_std(struct saa7164_port *port, v4l2_std_id id) |
| { |
| struct saa7164_dev *dev = port->dev; |
| unsigned int i; |
| |
| dprintk(DBGLVL_ENC, "%s(id=0x%x)\n", __func__, (u32)id); |
| |
| for (i = 0; i < ARRAY_SIZE(saa7164_tvnorms); i++) { |
| if (id & saa7164_tvnorms[i].id) |
| break; |
| } |
| if (i == ARRAY_SIZE(saa7164_tvnorms)) |
| return -EINVAL; |
| |
| port->encodernorm = saa7164_tvnorms[i]; |
| port->std = id; |
| |
| /* Update the audio decoder while is not running in |
| * auto detect mode. |
| */ |
| saa7164_api_set_audio_std(port); |
| |
| dprintk(DBGLVL_ENC, "%s(id=0x%x) OK\n", __func__, (u32)id); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_s_std(fh->port, id); |
| } |
| |
| int saa7164_g_std(struct saa7164_port *port, v4l2_std_id *id) |
| { |
| *id = port->std; |
| return 0; |
| } |
| |
| static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_g_std(fh->port, id); |
| } |
| |
| int saa7164_enum_input(struct file *file, void *priv, struct v4l2_input *i) |
| { |
| static const char * const inputs[] = { |
| "tuner", "composite", "svideo", "aux", |
| "composite 2", "svideo 2", "aux 2" |
| }; |
| int n; |
| |
| if (i->index >= 7) |
| return -EINVAL; |
| |
| strscpy(i->name, inputs[i->index], sizeof(i->name)); |
| |
| if (i->index == 0) |
| i->type = V4L2_INPUT_TYPE_TUNER; |
| else |
| i->type = V4L2_INPUT_TYPE_CAMERA; |
| |
| for (n = 0; n < ARRAY_SIZE(saa7164_tvnorms); n++) |
| i->std |= saa7164_tvnorms[n].id; |
| |
| return 0; |
| } |
| |
| int saa7164_g_input(struct saa7164_port *port, unsigned int *i) |
| { |
| struct saa7164_dev *dev = port->dev; |
| |
| if (saa7164_api_get_videomux(port) != SAA_OK) |
| return -EIO; |
| |
| *i = (port->mux_input - 1); |
| |
| dprintk(DBGLVL_ENC, "%s() input=%d\n", __func__, *i); |
| |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_g_input(fh->port, i); |
| } |
| |
| int saa7164_s_input(struct saa7164_port *port, unsigned int i) |
| { |
| struct saa7164_dev *dev = port->dev; |
| |
| dprintk(DBGLVL_ENC, "%s() input=%d\n", __func__, i); |
| |
| if (i >= 7) |
| return -EINVAL; |
| |
| port->mux_input = i + 1; |
| |
| if (saa7164_api_set_videomux(port) != SAA_OK) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_s_input(fh->port, i); |
| } |
| |
| int saa7164_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| struct saa7164_port *port = fh->port; |
| struct saa7164_dev *dev = port->dev; |
| |
| if (0 != t->index) |
| return -EINVAL; |
| |
| strscpy(t->name, "tuner", sizeof(t->name)); |
| t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO; |
| t->rangelow = SAA7164_TV_MIN_FREQ; |
| t->rangehigh = SAA7164_TV_MAX_FREQ; |
| |
| dprintk(DBGLVL_ENC, "VIDIOC_G_TUNER: tuner type %d\n", t->type); |
| |
| return 0; |
| } |
| |
| int saa7164_s_tuner(struct file *file, void *priv, |
| const struct v4l2_tuner *t) |
| { |
| if (0 != t->index) |
| return -EINVAL; |
| |
| /* Update the A/V core */ |
| return 0; |
| } |
| |
| int saa7164_g_frequency(struct saa7164_port *port, struct v4l2_frequency *f) |
| { |
| if (f->tuner) |
| return -EINVAL; |
| |
| f->frequency = port->freq; |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_g_frequency(fh->port, f); |
| } |
| |
| int saa7164_s_frequency(struct saa7164_port *port, |
| const struct v4l2_frequency *f) |
| { |
| struct saa7164_dev *dev = port->dev; |
| struct saa7164_port *tsport; |
| struct dvb_frontend *fe; |
| |
| /* TODO: Pull this for the std */ |
| struct analog_parameters params = { |
| .mode = V4L2_TUNER_ANALOG_TV, |
| .audmode = V4L2_TUNER_MODE_STEREO, |
| .std = port->encodernorm.id, |
| .frequency = f->frequency |
| }; |
| |
| /* Stop the encoder */ |
| dprintk(DBGLVL_ENC, "%s() frequency=%d tuner=%d\n", __func__, |
| f->frequency, f->tuner); |
| |
| if (f->tuner != 0) |
| return -EINVAL; |
| |
| port->freq = clamp(f->frequency, |
| SAA7164_TV_MIN_FREQ, SAA7164_TV_MAX_FREQ); |
| |
| /* Update the hardware */ |
| if (port->nr == SAA7164_PORT_ENC1) |
| tsport = &dev->ports[SAA7164_PORT_TS1]; |
| else if (port->nr == SAA7164_PORT_ENC2) |
| tsport = &dev->ports[SAA7164_PORT_TS2]; |
| else |
| BUG(); |
| |
| fe = tsport->dvb.frontend; |
| |
| if (fe && fe->ops.tuner_ops.set_analog_params) |
| fe->ops.tuner_ops.set_analog_params(fe, ¶ms); |
| else |
| printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); |
| |
| saa7164_encoder_initialize(port); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| const struct v4l2_frequency *f) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| |
| return saa7164_s_frequency(fh->port, f); |
| } |
| |
| static int saa7164_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct saa7164_port *port = |
| container_of(ctrl->handler, struct saa7164_port, ctrl_handler); |
| struct saa7164_encoder_params *params = &port->encoder_params; |
| int ret = 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| port->ctl_brightness = ctrl->val; |
| saa7164_api_set_usercontrol(port, PU_BRIGHTNESS_CONTROL); |
| break; |
| case V4L2_CID_CONTRAST: |
| port->ctl_contrast = ctrl->val; |
| saa7164_api_set_usercontrol(port, PU_CONTRAST_CONTROL); |
| break; |
| case V4L2_CID_SATURATION: |
| port->ctl_saturation = ctrl->val; |
| saa7164_api_set_usercontrol(port, PU_SATURATION_CONTROL); |
| break; |
| case V4L2_CID_HUE: |
| port->ctl_hue = ctrl->val; |
| saa7164_api_set_usercontrol(port, PU_HUE_CONTROL); |
| break; |
| case V4L2_CID_SHARPNESS: |
| port->ctl_sharpness = ctrl->val; |
| saa7164_api_set_usercontrol(port, PU_SHARPNESS_CONTROL); |
| break; |
| case V4L2_CID_AUDIO_VOLUME: |
| port->ctl_volume = ctrl->val; |
| saa7164_api_set_audio_volume(port, port->ctl_volume); |
| break; |
| case V4L2_CID_MPEG_VIDEO_BITRATE: |
| params->bitrate = ctrl->val; |
| break; |
| case V4L2_CID_MPEG_STREAM_TYPE: |
| params->stream_type = ctrl->val; |
| break; |
| case V4L2_CID_MPEG_AUDIO_MUTE: |
| params->ctl_mute = ctrl->val; |
| ret = saa7164_api_audio_mute(port, params->ctl_mute); |
| if (ret != SAA_OK) { |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, |
| ret); |
| ret = -EIO; |
| } |
| break; |
| case V4L2_CID_MPEG_VIDEO_ASPECT: |
| params->ctl_aspect = ctrl->val; |
| ret = saa7164_api_set_aspect_ratio(port); |
| if (ret != SAA_OK) { |
| printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, |
| ret); |
| ret = -EIO; |
| } |
| break; |
| case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: |
| params->bitrate_mode = ctrl->val; |
| break; |
| case V4L2_CID_MPEG_VIDEO_B_FRAMES: |
| params->refdist = ctrl->val; |
| break; |
| case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: |
| params->bitrate_peak = ctrl->val; |
| break; |
| case V4L2_CID_MPEG_VIDEO_GOP_SIZE: |
| params->gop_size = ctrl->val; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| struct saa7164_port *port = fh->port; |
| struct saa7164_dev *dev = port->dev; |
| |
| strscpy(cap->driver, dev->name, sizeof(cap->driver)); |
| strscpy(cap->card, saa7164_boards[dev->board].name, |
| sizeof(cap->card)); |
| sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | |
| V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | |
| V4L2_CAP_DEVICE_CAPS; |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index != 0) |
| return -EINVAL; |
| |
| f->pixelformat = V4L2_PIX_FMT_MPEG; |
| |
| return 0; |
| } |
| |
| static int vidioc_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| struct saa7164_port *port = fh->port; |
| |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = SAA7164_SIZEIMAGE; |
| f->fmt.pix.field = V4L2_FIELD_INTERLACED; |
| f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; |
| f->fmt.pix.width = port->width; |
| f->fmt.pix.height = port->height; |
| return 0; |
| } |
| |
| static int saa7164_encoder_stop_port(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| int ret; |
| |
| ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); |
| if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", |
| __func__, ret); |
| ret = -EIO; |
| } else { |
| dprintk(DBGLVL_ENC, "%s() Stopped\n", __func__); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int saa7164_encoder_acquire_port(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| int ret; |
| |
| ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); |
| if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", |
| __func__, ret); |
| ret = -EIO; |
| } else { |
| dprintk(DBGLVL_ENC, "%s() Acquired\n", __func__); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int saa7164_encoder_pause_port(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| int ret; |
| |
| ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); |
| if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", |
| __func__, ret); |
| ret = -EIO; |
| } else { |
| dprintk(DBGLVL_ENC, "%s() Paused\n", __func__); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /* Firmware is very windows centric, meaning you have to transition |
| * the part through AVStream / KS Windows stages, forwards or backwards. |
| * States are: stopped, acquired (h/w), paused, started. |
| * We have to leave here will all of the soft buffers on the free list, |
| * else the cfg_post() func won't have soft buffers to correctly configure. |
| */ |
| static int saa7164_encoder_stop_streaming(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| struct saa7164_buffer *buf; |
| struct saa7164_user_buffer *ubuf; |
| struct list_head *c, *n; |
| int ret; |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); |
| |
| ret = saa7164_encoder_pause_port(port); |
| ret = saa7164_encoder_acquire_port(port); |
| ret = saa7164_encoder_stop_port(port); |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) Hardware stopped\n", __func__, |
| port->nr); |
| |
| /* Reset the state of any allocated buffer resources */ |
| mutex_lock(&port->dmaqueue_lock); |
| |
| /* Reset the hard and soft buffer state */ |
| list_for_each_safe(c, n, &port->dmaqueue.list) { |
| buf = list_entry(c, struct saa7164_buffer, list); |
| buf->flags = SAA7164_BUFFER_FREE; |
| buf->pos = 0; |
| } |
| |
| list_for_each_safe(c, n, &port->list_buf_used.list) { |
| ubuf = list_entry(c, struct saa7164_user_buffer, list); |
| ubuf->pos = 0; |
| list_move_tail(&ubuf->list, &port->list_buf_free.list); |
| } |
| |
| mutex_unlock(&port->dmaqueue_lock); |
| |
| /* Free any allocated resources */ |
| saa7164_encoder_buffers_dealloc(port); |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) Released\n", __func__, port->nr); |
| |
| return ret; |
| } |
| |
| static int saa7164_encoder_start_streaming(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| int result, ret = 0; |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); |
| |
| port->done_first_interrupt = 0; |
| |
| /* allocate all of the PCIe DMA buffer resources on the fly, |
| * allowing switching between TS and PS payloads without |
| * requiring a complete driver reload. |
| */ |
| saa7164_encoder_buffers_alloc(port); |
| |
| /* Configure the encoder with any cache values */ |
| saa7164_api_set_encoder(port); |
| saa7164_api_get_encoder(port); |
| |
| /* Place the empty buffers on the hardware */ |
| saa7164_buffer_cfg_port(port); |
| |
| /* Acquire the hardware */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", |
| __func__, result); |
| |
| /* Stop the hardware, regardless */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n", |
| __func__, result); |
| } |
| ret = -EIO; |
| goto out; |
| } else |
| dprintk(DBGLVL_ENC, "%s() Acquired\n", __func__); |
| |
| /* Pause the hardware */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", |
| __func__, result); |
| |
| /* Stop the hardware, regardless */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", |
| __func__, result); |
| } |
| |
| ret = -EIO; |
| goto out; |
| } else |
| dprintk(DBGLVL_ENC, "%s() Paused\n", __func__); |
| |
| /* Start the hardware */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", |
| __func__, result); |
| |
| /* Stop the hardware, regardless */ |
| result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); |
| if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { |
| printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", |
| __func__, result); |
| } |
| |
| ret = -EIO; |
| } else |
| dprintk(DBGLVL_ENC, "%s() Running\n", __func__); |
| |
| out: |
| return ret; |
| } |
| |
| static int fops_open(struct file *file) |
| { |
| struct saa7164_dev *dev; |
| struct saa7164_port *port; |
| struct saa7164_encoder_fh *fh; |
| |
| port = (struct saa7164_port *)video_get_drvdata(video_devdata(file)); |
| if (!port) |
| return -ENODEV; |
| |
| dev = port->dev; |
| |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| /* allocate + initialize per filehandle data */ |
| fh = kzalloc(sizeof(*fh), GFP_KERNEL); |
| if (NULL == fh) |
| return -ENOMEM; |
| |
| fh->port = port; |
| v4l2_fh_init(&fh->fh, video_devdata(file)); |
| v4l2_fh_add(&fh->fh); |
| file->private_data = fh; |
| |
| return 0; |
| } |
| |
| static int fops_release(struct file *file) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| struct saa7164_port *port = fh->port; |
| struct saa7164_dev *dev = port->dev; |
| |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| /* Shut device down on last close */ |
| if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { |
| if (atomic_dec_return(&port->v4l_reader_count) == 0) { |
| /* stop mpeg capture then cancel buffers */ |
| saa7164_encoder_stop_streaming(port); |
| } |
| } |
| |
| v4l2_fh_del(&fh->fh); |
| v4l2_fh_exit(&fh->fh); |
| kfree(fh); |
| |
| return 0; |
| } |
| |
| static struct |
| saa7164_user_buffer *saa7164_enc_next_buf(struct saa7164_port *port) |
| { |
| struct saa7164_user_buffer *ubuf = NULL; |
| struct saa7164_dev *dev = port->dev; |
| u32 crc; |
| |
| mutex_lock(&port->dmaqueue_lock); |
| if (!list_empty(&port->list_buf_used.list)) { |
| ubuf = list_first_entry(&port->list_buf_used.list, |
| struct saa7164_user_buffer, list); |
| |
| if (crc_checking) { |
| crc = crc32(0, ubuf->data, ubuf->actual_size); |
| if (crc != ubuf->crc) { |
| printk(KERN_ERR |
| "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", |
| __func__, |
| ubuf, ubuf->crc, crc); |
| } |
| } |
| |
| } |
| mutex_unlock(&port->dmaqueue_lock); |
| |
| dprintk(DBGLVL_ENC, "%s() returns %p\n", __func__, ubuf); |
| |
| return ubuf; |
| } |
| |
| static ssize_t fops_read(struct file *file, char __user *buffer, |
| size_t count, loff_t *pos) |
| { |
| struct saa7164_encoder_fh *fh = file->private_data; |
| struct saa7164_port *port = fh->port; |
| struct saa7164_user_buffer *ubuf = NULL; |
| struct saa7164_dev *dev = port->dev; |
| int ret = 0; |
| int rem, cnt; |
| u8 *p; |
| |
| port->last_read_msecs_diff = port->last_read_msecs; |
| port->last_read_msecs = jiffies_to_msecs(jiffies); |
| port->last_read_msecs_diff = port->last_read_msecs - |
| port->last_read_msecs_diff; |
| |
| saa7164_histogram_update(&port->read_interval, |
| port->last_read_msecs_diff); |
| |
| if (*pos) { |
| printk(KERN_ERR "%s() ESPIPE\n", __func__); |
| return -ESPIPE; |
| } |
| |
| if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { |
| if (atomic_inc_return(&port->v4l_reader_count) == 1) { |
| |
| if (saa7164_encoder_initialize(port) < 0) { |
| printk(KERN_ERR "%s() EINVAL\n", __func__); |
| return -EINVAL; |
| } |
| |
| saa7164_encoder_start_streaming(port); |
| msleep(200); |
| } |
| } |
| |
| /* blocking wait for buffer */ |
| if ((file->f_flags & O_NONBLOCK) == 0) { |
| if (wait_event_interruptible(port->wait_read, |
| saa7164_enc_next_buf(port))) { |
| printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); |
| return -ERESTARTSYS; |
| } |
| } |
| |
| /* Pull the first buffer from the used list */ |
| ubuf = saa7164_enc_next_buf(port); |
| |
| while ((count > 0) && ubuf) { |
| |
| /* set remaining bytes to copy */ |
| rem = ubuf->actual_size - ubuf->pos; |
| cnt = rem > count ? count : rem; |
| |
| p = ubuf->data + ubuf->pos; |
| |
| dprintk(DBGLVL_ENC, |
| "%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n", |
| __func__, (int)count, cnt, rem, ubuf, ubuf->pos); |
| |
| if (copy_to_user(buffer, p, cnt)) { |
| printk(KERN_ERR "%s() copy_to_user failed\n", __func__); |
| if (!ret) { |
| printk(KERN_ERR "%s() EFAULT\n", __func__); |
| ret = -EFAULT; |
| } |
| goto err; |
| } |
| |
| ubuf->pos += cnt; |
| count -= cnt; |
| buffer += cnt; |
| ret += cnt; |
| |
| if (ubuf->pos > ubuf->actual_size) |
| printk(KERN_ERR "read() pos > actual, huh?\n"); |
| |
| if (ubuf->pos == ubuf->actual_size) { |
| |
| /* finished with current buffer, take next buffer */ |
| |
| /* Requeue the buffer on the free list */ |
| ubuf->pos = 0; |
| |
| mutex_lock(&port->dmaqueue_lock); |
| list_move_tail(&ubuf->list, &port->list_buf_free.list); |
| mutex_unlock(&port->dmaqueue_lock); |
| |
| /* Dequeue next */ |
| if ((file->f_flags & O_NONBLOCK) == 0) { |
| if (wait_event_interruptible(port->wait_read, |
| saa7164_enc_next_buf(port))) { |
| break; |
| } |
| } |
| ubuf = saa7164_enc_next_buf(port); |
| } |
| } |
| err: |
| if (!ret && !ubuf) |
| ret = -EAGAIN; |
| |
| return ret; |
| } |
| |
| static __poll_t fops_poll(struct file *file, poll_table *wait) |
| { |
| __poll_t req_events = poll_requested_events(wait); |
| struct saa7164_encoder_fh *fh = |
| (struct saa7164_encoder_fh *)file->private_data; |
| struct saa7164_port *port = fh->port; |
| __poll_t mask = v4l2_ctrl_poll(file, wait); |
| |
| port->last_poll_msecs_diff = port->last_poll_msecs; |
| port->last_poll_msecs = jiffies_to_msecs(jiffies); |
| port->last_poll_msecs_diff = port->last_poll_msecs - |
| port->last_poll_msecs_diff; |
| |
| saa7164_histogram_update(&port->poll_interval, |
| port->last_poll_msecs_diff); |
| |
| if (!(req_events & (EPOLLIN | EPOLLRDNORM))) |
| return mask; |
| |
| if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { |
| if (atomic_inc_return(&port->v4l_reader_count) == 1) { |
| if (saa7164_encoder_initialize(port) < 0) |
| return mask | EPOLLERR; |
| saa7164_encoder_start_streaming(port); |
| msleep(200); |
| } |
| } |
| |
| /* Pull the first buffer from the used list */ |
| if (!list_empty(&port->list_buf_used.list)) |
| mask |= EPOLLIN | EPOLLRDNORM; |
| |
| return mask; |
| } |
| |
| static const struct v4l2_ctrl_ops saa7164_ctrl_ops = { |
| .s_ctrl = saa7164_s_ctrl, |
| }; |
| |
| static const struct v4l2_file_operations mpeg_fops = { |
| .owner = THIS_MODULE, |
| .open = fops_open, |
| .release = fops_release, |
| .read = fops_read, |
| .poll = fops_poll, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_g_std = vidioc_g_std, |
| .vidioc_enum_input = saa7164_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_g_tuner = saa7164_g_tuner, |
| .vidioc_s_tuner = saa7164_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_fmt_vid_cap, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| static struct video_device saa7164_mpeg_template = { |
| .name = "saa7164", |
| .fops = &mpeg_fops, |
| .ioctl_ops = &mpeg_ioctl_ops, |
| .minor = -1, |
| .tvnorms = SAA7164_NORMS, |
| .device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | |
| V4L2_CAP_TUNER, |
| }; |
| |
| static struct video_device *saa7164_encoder_alloc( |
| struct saa7164_port *port, |
| struct pci_dev *pci, |
| struct video_device *template, |
| char *type) |
| { |
| struct video_device *vfd; |
| struct saa7164_dev *dev = port->dev; |
| |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| vfd = video_device_alloc(); |
| if (NULL == vfd) |
| return NULL; |
| |
| *vfd = *template; |
| snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, |
| type, saa7164_boards[dev->board].name); |
| |
| vfd->v4l2_dev = &dev->v4l2_dev; |
| vfd->release = video_device_release; |
| return vfd; |
| } |
| |
| int saa7164_encoder_register(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| struct v4l2_ctrl_handler *hdl = &port->ctrl_handler; |
| int result = -ENODEV; |
| |
| dprintk(DBGLVL_ENC, "%s()\n", __func__); |
| |
| BUG_ON(port->type != SAA7164_MPEG_ENCODER); |
| |
| /* Sanity check that the PCI configuration space is active */ |
| if (port->hwcfg.BARLocation == 0) { |
| printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", |
| __func__, result); |
| result = -ENOMEM; |
| goto failed; |
| } |
| |
| /* Establish encoder defaults here */ |
| /* Set default TV standard */ |
| port->encodernorm = saa7164_tvnorms[0]; |
| port->width = 720; |
| port->mux_input = 1; /* Composite */ |
| port->video_format = EU_VIDEO_FORMAT_MPEG_2; |
| port->audio_format = 0; |
| port->video_resolution = 0; |
| port->freq = SAA7164_TV_MIN_FREQ; |
| |
| v4l2_ctrl_handler_init(hdl, 14); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_BRIGHTNESS, 0, 255, 1, 127); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_CONTRAST, 0, 255, 1, 66); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_SATURATION, 0, 255, 1, 62); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_HUE, 0, 255, 1, 128); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_SHARPNESS, 0x0, 0x0f, 1, 8); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_AUDIO_MUTE, 0x0, 0x01, 1, 0); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_AUDIO_VOLUME, -83, 24, 1, 20); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_BITRATE, |
| ENCODER_MIN_BITRATE, ENCODER_MAX_BITRATE, |
| 100000, ENCODER_DEF_BITRATE); |
| v4l2_ctrl_new_std_menu(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_STREAM_TYPE, |
| V4L2_MPEG_STREAM_TYPE_MPEG2_TS, 0, |
| V4L2_MPEG_STREAM_TYPE_MPEG2_PS); |
| v4l2_ctrl_new_std_menu(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_ASPECT, |
| V4L2_MPEG_VIDEO_ASPECT_221x100, 0, |
| V4L2_MPEG_VIDEO_ASPECT_4x3); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_GOP_SIZE, 1, 255, 1, 15); |
| v4l2_ctrl_new_std_menu(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_BITRATE_MODE, |
| V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0, |
| V4L2_MPEG_VIDEO_BITRATE_MODE_VBR); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_B_FRAMES, 1, 3, 1, 1); |
| v4l2_ctrl_new_std(hdl, &saa7164_ctrl_ops, |
| V4L2_CID_MPEG_VIDEO_BITRATE_PEAK, |
| ENCODER_MIN_BITRATE, ENCODER_MAX_BITRATE, |
| 100000, ENCODER_DEF_BITRATE); |
| if (hdl->error) { |
| result = hdl->error; |
| goto failed; |
| } |
| |
| port->std = V4L2_STD_NTSC_M; |
| |
| if (port->encodernorm.id & V4L2_STD_525_60) |
| port->height = 480; |
| else |
| port->height = 576; |
| |
| /* Allocate and register the video device node */ |
| port->v4l_device = saa7164_encoder_alloc(port, |
| dev->pci, &saa7164_mpeg_template, "mpeg"); |
| |
| if (!port->v4l_device) { |
| printk(KERN_INFO "%s: can't allocate mpeg device\n", |
| dev->name); |
| result = -ENOMEM; |
| goto failed; |
| } |
| |
| port->v4l_device->ctrl_handler = hdl; |
| v4l2_ctrl_handler_setup(hdl); |
| video_set_drvdata(port->v4l_device, port); |
| result = video_register_device(port->v4l_device, |
| VFL_TYPE_VIDEO, -1); |
| if (result < 0) { |
| printk(KERN_INFO "%s: can't register mpeg device\n", |
| dev->name); |
| /* TODO: We're going to leak here if we don't dealloc |
| The buffers above. The unreg function can't deal wit it. |
| */ |
| goto failed; |
| } |
| |
| printk(KERN_INFO "%s: registered device video%d [mpeg]\n", |
| dev->name, port->v4l_device->num); |
| |
| /* Configure the hardware defaults */ |
| saa7164_api_set_videomux(port); |
| saa7164_api_set_usercontrol(port, PU_BRIGHTNESS_CONTROL); |
| saa7164_api_set_usercontrol(port, PU_CONTRAST_CONTROL); |
| saa7164_api_set_usercontrol(port, PU_HUE_CONTROL); |
| saa7164_api_set_usercontrol(port, PU_SATURATION_CONTROL); |
| saa7164_api_set_usercontrol(port, PU_SHARPNESS_CONTROL); |
| saa7164_api_audio_mute(port, 0); |
| saa7164_api_set_audio_volume(port, 20); |
| saa7164_api_set_aspect_ratio(port); |
| |
| /* Disable audio standard detection, it's buggy */ |
| saa7164_api_set_audio_detection(port, 0); |
| |
| saa7164_api_set_encoder(port); |
| saa7164_api_get_encoder(port); |
| |
| result = 0; |
| failed: |
| return result; |
| } |
| |
| void saa7164_encoder_unregister(struct saa7164_port *port) |
| { |
| struct saa7164_dev *dev = port->dev; |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d)\n", __func__, port->nr); |
| |
| BUG_ON(port->type != SAA7164_MPEG_ENCODER); |
| |
| if (port->v4l_device) { |
| if (port->v4l_device->minor != -1) |
| video_unregister_device(port->v4l_device); |
| else |
| video_device_release(port->v4l_device); |
| |
| port->v4l_device = NULL; |
| } |
| v4l2_ctrl_handler_free(&port->ctrl_handler); |
| |
| dprintk(DBGLVL_ENC, "%s(port=%d) done\n", __func__, port->nr); |
| } |
| |