blob: 28afc5f15ae8cc51a33e38a2452f606a0dec945b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Hardware monitoring driver for Analog Devices LT7182S
*
* Copyright (c) 2022 Guenter Roeck
*
*/
#include <linux/bits.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include "pmbus.h"
#define LT7182S_NUM_PAGES 2
#define MFR_READ_EXTVCC 0xcd
#define MFR_READ_ITH 0xce
#define MFR_CONFIG_ALL_LT7182S 0xd1
#define MFR_IOUT_PEAK 0xd7
#define MFR_ADC_CONTROL_LT7182S 0xd8
#define MFR_DEBUG_TELEMETRY BIT(0)
#define MFR_VOUT_PEAK 0xdd
#define MFR_VIN_PEAK 0xde
#define MFR_TEMPERATURE_1_PEAK 0xdf
#define MFR_CLEAR_PEAKS 0xe3
#define MFR_CONFIG_IEEE BIT(8)
static int lt7182s_read_word_data(struct i2c_client *client, int page, int phase, int reg)
{
int ret;
switch (reg) {
case PMBUS_VIRT_READ_VMON:
if (page == 0 || page == 1)
ret = pmbus_read_word_data(client, page, phase, MFR_READ_ITH);
else
ret = pmbus_read_word_data(client, 0, phase, MFR_READ_EXTVCC);
break;
case PMBUS_VIRT_READ_IOUT_MAX:
ret = pmbus_read_word_data(client, page, phase, MFR_IOUT_PEAK);
break;
case PMBUS_VIRT_READ_VOUT_MAX:
ret = pmbus_read_word_data(client, page, phase, MFR_VOUT_PEAK);
break;
case PMBUS_VIRT_READ_VIN_MAX:
ret = pmbus_read_word_data(client, page, phase, MFR_VIN_PEAK);
break;
case PMBUS_VIRT_READ_TEMP_MAX:
ret = pmbus_read_word_data(client, page, phase, MFR_TEMPERATURE_1_PEAK);
break;
case PMBUS_VIRT_RESET_VIN_HISTORY:
ret = (page == 0) ? 0 : -ENODATA;
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static int lt7182s_write_word_data(struct i2c_client *client, int page, int reg, u16 word)
{
int ret;
switch (reg) {
case PMBUS_VIRT_RESET_VIN_HISTORY:
ret = pmbus_write_byte(client, 0, MFR_CLEAR_PEAKS);
break;
default:
ret = -ENODATA;
break;
}
return ret;
}
static struct pmbus_driver_info lt7182s_info = {
.pages = LT7182S_NUM_PAGES,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = linear,
.format[PSC_CURRENT_IN] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_POWER] = linear,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_STATUS_INPUT,
.read_word_data = lt7182s_read_word_data,
.write_word_data = lt7182s_write_word_data,
};
static int lt7182s_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct pmbus_driver_info *info;
u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA |
I2C_FUNC_SMBUS_READ_WORD_DATA |
I2C_FUNC_SMBUS_READ_BLOCK_DATA))
return -ENODEV;
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
if (ret < 0) {
dev_err(dev, "Failed to read PMBUS_MFR_ID\n");
return ret;
}
if (ret != 3 || strncmp(buf, "ADI", 3)) {
buf[ret] = '\0';
dev_err(dev, "Manufacturer '%s' not supported\n", buf);
return -ENODEV;
}
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
if (ret < 0) {
dev_err(dev, "Failed to read PMBUS_MFR_MODEL\n");
return ret;
}
if (ret != 7 || strncmp(buf, "LT7182S", 7)) {
buf[ret] = '\0';
dev_err(dev, "Model '%s' not supported\n", buf);
return -ENODEV;
}
info = devm_kmemdup(dev, &lt7182s_info,
sizeof(struct pmbus_driver_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
/* Set data format to IEEE754 if configured */
ret = i2c_smbus_read_word_data(client, MFR_CONFIG_ALL_LT7182S);
if (ret < 0)
return ret;
if (ret & MFR_CONFIG_IEEE) {
info->format[PSC_VOLTAGE_IN] = ieee754;
info->format[PSC_VOLTAGE_OUT] = ieee754;
info->format[PSC_CURRENT_IN] = ieee754;
info->format[PSC_CURRENT_OUT] = ieee754;
info->format[PSC_TEMPERATURE] = ieee754;
info->format[PSC_POWER] = ieee754;
}
/* Enable VMON output if configured */
ret = i2c_smbus_read_byte_data(client, MFR_ADC_CONTROL_LT7182S);
if (ret < 0)
return ret;
if (ret & MFR_DEBUG_TELEMETRY) {
info->pages = 3;
info->func[0] |= PMBUS_HAVE_VMON;
info->func[1] |= PMBUS_HAVE_VMON;
info->func[2] = PMBUS_HAVE_VMON;
}
return pmbus_do_probe(client, info);
}
static const struct i2c_device_id lt7182s_id[] = {
{ "lt7182s", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, lt7182s_id);
static const struct of_device_id __maybe_unused lt7182s_of_match[] = {
{ .compatible = "adi,lt7182s" },
{}
};
static struct i2c_driver lt7182s_driver = {
.driver = {
.name = "lt7182s",
.of_match_table = of_match_ptr(lt7182s_of_match),
},
.probe = lt7182s_probe,
.id_table = lt7182s_id,
};
module_i2c_driver(lt7182s_driver);
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("PMBus driver for Analog Devices LT7182S");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(PMBUS);