| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ASoC machine driver for Intel Broadwell platforms with RT5650 codec |
| * |
| * Copyright 2019, The Chromium OS Authors. All rights reserved. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <sound/core.h> |
| #include <sound/jack.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-acpi.h> |
| |
| #include "../../codecs/rt5645.h" |
| |
| struct bdw_rt5650_priv { |
| struct gpio_desc *gpio_hp_en; |
| struct snd_soc_component *component; |
| }; |
| |
| static const struct snd_soc_dapm_widget bdw_rt5650_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone", NULL), |
| SND_SOC_DAPM_SPK("Speaker", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("DMIC Pair1", NULL), |
| SND_SOC_DAPM_MIC("DMIC Pair2", NULL), |
| }; |
| |
| static const struct snd_soc_dapm_route bdw_rt5650_map[] = { |
| /* Speakers */ |
| {"Speaker", NULL, "SPOL"}, |
| {"Speaker", NULL, "SPOR"}, |
| |
| /* Headset jack connectors */ |
| {"Headphone", NULL, "HPOL"}, |
| {"Headphone", NULL, "HPOR"}, |
| {"IN1P", NULL, "Headset Mic"}, |
| {"IN1N", NULL, "Headset Mic"}, |
| |
| /* Digital MICs |
| * DMIC Pair1 are the two DMICs connected on the DMICN1 connector. |
| * DMIC Pair2 are the two DMICs connected on the DMICN2 connector. |
| * Facing the camera, DMIC Pair1 are on the left side, DMIC Pair2 |
| * are on the right side. |
| */ |
| {"DMIC L1", NULL, "DMIC Pair1"}, |
| {"DMIC R1", NULL, "DMIC Pair1"}, |
| {"DMIC L2", NULL, "DMIC Pair2"}, |
| {"DMIC R2", NULL, "DMIC Pair2"}, |
| |
| /* CODEC BE connections */ |
| {"SSP0 CODEC IN", NULL, "AIF1 Capture"}, |
| {"AIF1 Playback", NULL, "SSP0 CODEC OUT"}, |
| }; |
| |
| static const struct snd_kcontrol_new bdw_rt5650_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Speaker"), |
| SOC_DAPM_PIN_SWITCH("Headphone"), |
| SOC_DAPM_PIN_SWITCH("Headset Mic"), |
| SOC_DAPM_PIN_SWITCH("DMIC Pair1"), |
| SOC_DAPM_PIN_SWITCH("DMIC Pair2"), |
| }; |
| |
| |
| static struct snd_soc_jack headphone_jack; |
| static struct snd_soc_jack mic_jack; |
| |
| static struct snd_soc_jack_pin headphone_jack_pin = { |
| .pin = "Headphone", |
| .mask = SND_JACK_HEADPHONE, |
| }; |
| |
| static struct snd_soc_jack_pin mic_jack_pin = { |
| .pin = "Headset Mic", |
| .mask = SND_JACK_MICROPHONE, |
| }; |
| |
| static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| struct snd_interval *chan = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| /* The ADSP will convert the FE rate to 48k, max 4-channels */ |
| rate->min = rate->max = 48000; |
| chan->min = 2; |
| chan->max = 4; |
| |
| /* set SSP0 to 24 bit */ |
| snd_mask_set_format(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT), |
| SNDRV_PCM_FORMAT_S24_LE); |
| |
| return 0; |
| } |
| |
| static int bdw_rt5650_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); |
| struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0); |
| int ret; |
| |
| /* Workaround: set codec PLL to 19.2MHz that PLL source is |
| * from MCLK(24MHz) to conform 2.4MHz DMIC clock. |
| */ |
| ret = snd_soc_dai_set_pll(codec_dai, 0, RT5645_PLL1_S_MCLK, |
| 24000000, 19200000); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set codec pll: %d\n", ret); |
| return ret; |
| } |
| |
| /* The actual MCLK freq is 24MHz. The codec is told that MCLK is |
| * 24.576MHz to satisfy the requirement of rl6231_get_clk_info. |
| * ASRC is enabled on AD and DA filters to ensure good audio quality. |
| */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_PLL1, 24576000, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set codec sysclk configuration\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static struct snd_soc_ops bdw_rt5650_ops = { |
| .hw_params = bdw_rt5650_hw_params, |
| }; |
| |
| static const unsigned int channels[] = { |
| 2, 4, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list constraints_channels = { |
| .count = ARRAY_SIZE(channels), |
| .list = channels, |
| .mask = 0, |
| }; |
| |
| static int bdw_rt5650_fe_startup(struct snd_pcm_substream *substream) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| |
| /* Board supports stereo and quad configurations for capture */ |
| if (substream->stream != SNDRV_PCM_STREAM_CAPTURE) |
| return 0; |
| |
| runtime->hw.channels_max = 4; |
| return snd_pcm_hw_constraint_list(runtime, 0, |
| SNDRV_PCM_HW_PARAM_CHANNELS, |
| &constraints_channels); |
| } |
| |
| static const struct snd_soc_ops bdw_rt5650_fe_ops = { |
| .startup = bdw_rt5650_fe_startup, |
| }; |
| |
| static int bdw_rt5650_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| struct bdw_rt5650_priv *bdw_rt5650 = |
| snd_soc_card_get_drvdata(rtd->card); |
| struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0); |
| struct snd_soc_component *component = codec_dai->component; |
| int ret; |
| |
| /* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1. |
| * The ASRC clock source is clk_i2s1_asrc. |
| */ |
| rt5645_sel_asrc_clk_src(component, |
| RT5645_DA_STEREO_FILTER | |
| RT5645_DA_MONO_L_FILTER | |
| RT5645_DA_MONO_R_FILTER | |
| RT5645_AD_STEREO_FILTER | |
| RT5645_AD_MONO_L_FILTER | |
| RT5645_AD_MONO_R_FILTER, |
| RT5645_CLK_SEL_I2S1_ASRC); |
| |
| /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ |
| ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xF, 0xF, 4, 24); |
| |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); |
| return ret; |
| } |
| |
| /* Create and initialize headphone jack */ |
| if (snd_soc_card_jack_new_pins(rtd->card, "Headphone Jack", |
| SND_JACK_HEADPHONE, &headphone_jack, |
| &headphone_jack_pin, 1)) { |
| dev_err(component->dev, "Can't create headphone jack\n"); |
| } |
| |
| /* Create and initialize mic jack */ |
| if (snd_soc_card_jack_new_pins(rtd->card, "Mic Jack", |
| SND_JACK_MICROPHONE, &mic_jack, &mic_jack_pin, 1)) { |
| dev_err(component->dev, "Can't create mic jack\n"); |
| } |
| |
| rt5645_set_jack_detect(component, &headphone_jack, &mic_jack, NULL); |
| |
| bdw_rt5650->component = component; |
| |
| return 0; |
| } |
| |
| /* broadwell digital audio interface glue - connects codec <--> CPU */ |
| SND_SOC_DAILINK_DEF(dummy, |
| DAILINK_COMP_ARRAY(COMP_DUMMY())); |
| |
| SND_SOC_DAILINK_DEF(fe, |
| DAILINK_COMP_ARRAY(COMP_CPU("System Pin"))); |
| |
| SND_SOC_DAILINK_DEF(platform, |
| DAILINK_COMP_ARRAY(COMP_PLATFORM("haswell-pcm-audio"))); |
| |
| SND_SOC_DAILINK_DEF(be, |
| DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5650:00", "rt5645-aif1"))); |
| |
| SND_SOC_DAILINK_DEF(ssp0_port, |
| DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port"))); |
| |
| static struct snd_soc_dai_link bdw_rt5650_dais[] = { |
| /* Front End DAI links */ |
| { |
| .name = "System PCM", |
| .stream_name = "System Playback", |
| .nonatomic = 1, |
| .dynamic = 1, |
| .ops = &bdw_rt5650_fe_ops, |
| .trigger = { |
| SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST |
| }, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| SND_SOC_DAILINK_REG(fe, dummy, platform), |
| }, |
| |
| /* Back End DAI links */ |
| { |
| /* SSP0 - Codec */ |
| .name = "Codec", |
| .id = 0, |
| .nonatomic = 1, |
| .no_pcm = 1, |
| .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBC_CFC, |
| .ignore_pmdown_time = 1, |
| .be_hw_params_fixup = broadwell_ssp0_fixup, |
| .ops = &bdw_rt5650_ops, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .init = bdw_rt5650_init, |
| SND_SOC_DAILINK_REG(ssp0_port, be, platform), |
| }, |
| }; |
| |
| /* use space before codec name to simplify card ID, and simplify driver name */ |
| #define SOF_CARD_NAME "bdw rt5650" /* card name will be 'sof-bdw rt5650' */ |
| #define SOF_DRIVER_NAME "SOF" |
| |
| #define CARD_NAME "bdw-rt5650" |
| #define DRIVER_NAME NULL /* card name will be used for driver name */ |
| |
| /* ASoC machine driver for Broadwell DSP + RT5650 */ |
| static struct snd_soc_card bdw_rt5650_card = { |
| .name = CARD_NAME, |
| .driver_name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .dai_link = bdw_rt5650_dais, |
| .num_links = ARRAY_SIZE(bdw_rt5650_dais), |
| .dapm_widgets = bdw_rt5650_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(bdw_rt5650_widgets), |
| .dapm_routes = bdw_rt5650_map, |
| .num_dapm_routes = ARRAY_SIZE(bdw_rt5650_map), |
| .controls = bdw_rt5650_controls, |
| .num_controls = ARRAY_SIZE(bdw_rt5650_controls), |
| .fully_routed = true, |
| }; |
| |
| static int bdw_rt5650_probe(struct platform_device *pdev) |
| { |
| struct bdw_rt5650_priv *bdw_rt5650; |
| struct snd_soc_acpi_mach *mach; |
| int ret; |
| |
| bdw_rt5650_card.dev = &pdev->dev; |
| |
| /* Allocate driver private struct */ |
| bdw_rt5650 = devm_kzalloc(&pdev->dev, sizeof(struct bdw_rt5650_priv), |
| GFP_KERNEL); |
| if (!bdw_rt5650) |
| return -ENOMEM; |
| |
| /* override platform name, if required */ |
| mach = pdev->dev.platform_data; |
| ret = snd_soc_fixup_dai_links_platform_name(&bdw_rt5650_card, |
| mach->mach_params.platform); |
| |
| if (ret) |
| return ret; |
| |
| /* set card and driver name */ |
| if (snd_soc_acpi_sof_parent(&pdev->dev)) { |
| bdw_rt5650_card.name = SOF_CARD_NAME; |
| bdw_rt5650_card.driver_name = SOF_DRIVER_NAME; |
| } else { |
| bdw_rt5650_card.name = CARD_NAME; |
| bdw_rt5650_card.driver_name = DRIVER_NAME; |
| } |
| |
| snd_soc_card_set_drvdata(&bdw_rt5650_card, bdw_rt5650); |
| |
| return devm_snd_soc_register_card(&pdev->dev, &bdw_rt5650_card); |
| } |
| |
| static struct platform_driver bdw_rt5650_audio = { |
| .probe = bdw_rt5650_probe, |
| .driver = { |
| .name = "bdw-rt5650", |
| .pm = &snd_soc_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(bdw_rt5650_audio) |
| |
| /* Module information */ |
| MODULE_AUTHOR("Ben Zhang <benzh@chromium.org>"); |
| MODULE_DESCRIPTION("Intel Broadwell RT5650 machine driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:bdw-rt5650"); |