| /* |
| Mantis PCI bridge driver |
| |
| Copyright (C) Manu Abraham (abraham.manu@gmail.com) |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/i2c.h> |
| |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| |
| #include "dmxdev.h" |
| #include "dvbdev.h" |
| #include "dvb_demux.h" |
| #include "dvb_frontend.h" |
| #include "dvb_net.h" |
| |
| #include "mantis_common.h" |
| #include "mantis_reg.h" |
| #include "mantis_ioc.h" |
| |
| static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) |
| { |
| struct i2c_adapter *adapter = &mantis->adapter; |
| int err; |
| u8 buf = reg; |
| |
| struct i2c_msg msg[] = { |
| { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, |
| { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, |
| }; |
| |
| err = i2c_transfer(adapter, msg, 2); |
| if (err < 0) { |
| dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", |
| err, data[0], data[1]); |
| |
| return err; |
| } |
| |
| return 0; |
| } |
| int mantis_get_mac(struct mantis_pci *mantis) |
| { |
| int err; |
| u8 mac_addr[6] = {0}; |
| |
| err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); |
| if (err < 0) { |
| dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); |
| |
| return err; |
| } |
| |
| dprintk(MANTIS_ERROR, 0, |
| " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", |
| mac_addr[0], |
| mac_addr[1], |
| mac_addr[2], |
| mac_addr[3], |
| mac_addr[4], |
| mac_addr[5]); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mantis_get_mac); |
| |
| /* Turn the given bit on or off. */ |
| void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) |
| { |
| u32 cur; |
| |
| dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); |
| cur = mmread(MANTIS_GPIF_ADDR); |
| if (value) |
| mantis->gpio_status = cur | (1 << bitpos); |
| else |
| mantis->gpio_status = cur & (~(1 << bitpos)); |
| |
| dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); |
| mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); |
| mmwrite(0x00, MANTIS_GPIF_DOUT); |
| } |
| EXPORT_SYMBOL_GPL(gpio_set_bits); |
| |
| int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) |
| { |
| u32 reg; |
| |
| reg = mmread(MANTIS_CONTROL); |
| switch (stream_ctl) { |
| case STREAM_TO_HIF: |
| dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); |
| reg &= 0xff - MANTIS_BYPASS; |
| mmwrite(reg, MANTIS_CONTROL); |
| reg |= MANTIS_BYPASS; |
| mmwrite(reg, MANTIS_CONTROL); |
| break; |
| |
| case STREAM_TO_CAM: |
| dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); |
| reg |= MANTIS_BYPASS; |
| mmwrite(reg, MANTIS_CONTROL); |
| reg &= 0xff - MANTIS_BYPASS; |
| mmwrite(reg, MANTIS_CONTROL); |
| break; |
| default: |
| dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); |
| return -1; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mantis_stream_control); |