| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Sony imx412 Camera Sensor Driver |
| * |
| * Copyright (C) 2021 Intel Corporation |
| */ |
| #include <asm/unaligned.h> |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| /* Streaming Mode */ |
| #define IMX412_REG_MODE_SELECT 0x0100 |
| #define IMX412_MODE_STANDBY 0x00 |
| #define IMX412_MODE_STREAMING 0x01 |
| |
| /* Lines per frame */ |
| #define IMX412_REG_LPFR 0x0340 |
| |
| /* Chip ID */ |
| #define IMX412_REG_ID 0x0016 |
| #define IMX412_ID 0x577 |
| |
| /* Exposure control */ |
| #define IMX412_REG_EXPOSURE_CIT 0x0202 |
| #define IMX412_EXPOSURE_MIN 8 |
| #define IMX412_EXPOSURE_OFFSET 22 |
| #define IMX412_EXPOSURE_STEP 1 |
| #define IMX412_EXPOSURE_DEFAULT 0x0648 |
| |
| /* Analog gain control */ |
| #define IMX412_REG_AGAIN 0x0204 |
| #define IMX412_AGAIN_MIN 0 |
| #define IMX412_AGAIN_MAX 978 |
| #define IMX412_AGAIN_STEP 1 |
| #define IMX412_AGAIN_DEFAULT 0 |
| |
| /* Group hold register */ |
| #define IMX412_REG_HOLD 0x0104 |
| |
| /* Input clock rate */ |
| #define IMX412_INCLK_RATE 24000000 |
| |
| /* CSI2 HW configuration */ |
| #define IMX412_LINK_FREQ 600000000 |
| #define IMX412_NUM_DATA_LANES 4 |
| |
| #define IMX412_REG_MIN 0x00 |
| #define IMX412_REG_MAX 0xffff |
| |
| /** |
| * struct imx412_reg - imx412 sensor register |
| * @address: Register address |
| * @val: Register value |
| */ |
| struct imx412_reg { |
| u16 address; |
| u8 val; |
| }; |
| |
| /** |
| * struct imx412_reg_list - imx412 sensor register list |
| * @num_of_regs: Number of registers in the list |
| * @regs: Pointer to register list |
| */ |
| struct imx412_reg_list { |
| u32 num_of_regs; |
| const struct imx412_reg *regs; |
| }; |
| |
| /** |
| * struct imx412_mode - imx412 sensor mode structure |
| * @width: Frame width |
| * @height: Frame height |
| * @code: Format code |
| * @hblank: Horizontal blanking in lines |
| * @vblank: Vertical blanking in lines |
| * @vblank_min: Minimum vertical blanking in lines |
| * @vblank_max: Maximum vertical blanking in lines |
| * @pclk: Sensor pixel clock |
| * @link_freq_idx: Link frequency index |
| * @reg_list: Register list for sensor mode |
| */ |
| struct imx412_mode { |
| u32 width; |
| u32 height; |
| u32 code; |
| u32 hblank; |
| u32 vblank; |
| u32 vblank_min; |
| u32 vblank_max; |
| u64 pclk; |
| u32 link_freq_idx; |
| struct imx412_reg_list reg_list; |
| }; |
| |
| /** |
| * struct imx412 - imx412 sensor device structure |
| * @dev: Pointer to generic device |
| * @client: Pointer to i2c client |
| * @sd: V4L2 sub-device |
| * @pad: Media pad. Only one pad supported |
| * @reset_gpio: Sensor reset gpio |
| * @inclk: Sensor input clock |
| * @ctrl_handler: V4L2 control handler |
| * @link_freq_ctrl: Pointer to link frequency control |
| * @pclk_ctrl: Pointer to pixel clock control |
| * @hblank_ctrl: Pointer to horizontal blanking control |
| * @vblank_ctrl: Pointer to vertical blanking control |
| * @exp_ctrl: Pointer to exposure control |
| * @again_ctrl: Pointer to analog gain control |
| * @vblank: Vertical blanking in lines |
| * @cur_mode: Pointer to current selected sensor mode |
| * @mutex: Mutex for serializing sensor controls |
| * @streaming: Flag indicating streaming state |
| */ |
| struct imx412 { |
| struct device *dev; |
| struct i2c_client *client; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct gpio_desc *reset_gpio; |
| struct clk *inclk; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_ctrl *link_freq_ctrl; |
| struct v4l2_ctrl *pclk_ctrl; |
| struct v4l2_ctrl *hblank_ctrl; |
| struct v4l2_ctrl *vblank_ctrl; |
| struct { |
| struct v4l2_ctrl *exp_ctrl; |
| struct v4l2_ctrl *again_ctrl; |
| }; |
| u32 vblank; |
| const struct imx412_mode *cur_mode; |
| struct mutex mutex; |
| bool streaming; |
| }; |
| |
| static const s64 link_freq[] = { |
| IMX412_LINK_FREQ, |
| }; |
| |
| /* Sensor mode registers */ |
| static const struct imx412_reg mode_4056x3040_regs[] = { |
| {0x0136, 0x18}, |
| {0x0137, 0x00}, |
| {0x3c7e, 0x08}, |
| {0x3c7f, 0x02}, |
| {0x38a8, 0x1f}, |
| {0x38a9, 0xff}, |
| {0x38aa, 0x1f}, |
| {0x38ab, 0xff}, |
| {0x55d4, 0x00}, |
| {0x55d5, 0x00}, |
| {0x55d6, 0x07}, |
| {0x55d7, 0xff}, |
| {0x55e8, 0x07}, |
| {0x55e9, 0xff}, |
| {0x55ea, 0x00}, |
| {0x55eb, 0x00}, |
| {0x575c, 0x07}, |
| {0x575d, 0xff}, |
| {0x575e, 0x00}, |
| {0x575f, 0x00}, |
| {0x5764, 0x00}, |
| {0x5765, 0x00}, |
| {0x5766, 0x07}, |
| {0x5767, 0xff}, |
| {0x5974, 0x04}, |
| {0x5975, 0x01}, |
| {0x5f10, 0x09}, |
| {0x5f11, 0x92}, |
| {0x5f12, 0x32}, |
| {0x5f13, 0x72}, |
| {0x5f14, 0x16}, |
| {0x5f15, 0xba}, |
| {0x5f17, 0x13}, |
| {0x5f18, 0x24}, |
| {0x5f19, 0x60}, |
| {0x5f1a, 0xe3}, |
| {0x5f1b, 0xad}, |
| {0x5f1c, 0x74}, |
| {0x5f2d, 0x25}, |
| {0x5f5c, 0xd0}, |
| {0x6a22, 0x00}, |
| {0x6a23, 0x1d}, |
| {0x7ba8, 0x00}, |
| {0x7ba9, 0x00}, |
| {0x886b, 0x00}, |
| {0x9002, 0x0a}, |
| {0x9004, 0x1a}, |
| {0x9214, 0x93}, |
| {0x9215, 0x69}, |
| {0x9216, 0x93}, |
| {0x9217, 0x6b}, |
| {0x9218, 0x93}, |
| {0x9219, 0x6d}, |
| {0x921a, 0x57}, |
| {0x921b, 0x58}, |
| {0x921c, 0x57}, |
| {0x921d, 0x59}, |
| {0x921e, 0x57}, |
| {0x921f, 0x5a}, |
| {0x9220, 0x57}, |
| {0x9221, 0x5b}, |
| {0x9222, 0x93}, |
| {0x9223, 0x02}, |
| {0x9224, 0x93}, |
| {0x9225, 0x03}, |
| {0x9226, 0x93}, |
| {0x9227, 0x04}, |
| {0x9228, 0x93}, |
| {0x9229, 0x05}, |
| {0x922a, 0x98}, |
| {0x922b, 0x21}, |
| {0x922c, 0xb2}, |
| {0x922d, 0xdb}, |
| {0x922e, 0xb2}, |
| {0x922f, 0xdc}, |
| {0x9230, 0xb2}, |
| {0x9231, 0xdd}, |
| {0x9232, 0xe2}, |
| {0x9233, 0xe1}, |
| {0x9234, 0xb2}, |
| {0x9235, 0xe2}, |
| {0x9236, 0xb2}, |
| {0x9237, 0xe3}, |
| {0x9238, 0xb7}, |
| {0x9239, 0xb9}, |
| {0x923a, 0xb7}, |
| {0x923b, 0xbb}, |
| {0x923c, 0xb7}, |
| {0x923d, 0xbc}, |
| {0x923e, 0xb7}, |
| {0x923f, 0xc5}, |
| {0x9240, 0xb7}, |
| {0x9241, 0xc7}, |
| {0x9242, 0xb7}, |
| {0x9243, 0xc9}, |
| {0x9244, 0x98}, |
| {0x9245, 0x56}, |
| {0x9246, 0x98}, |
| {0x9247, 0x55}, |
| {0x9380, 0x00}, |
| {0x9381, 0x62}, |
| {0x9382, 0x00}, |
| {0x9383, 0x56}, |
| {0x9384, 0x00}, |
| {0x9385, 0x52}, |
| {0x9388, 0x00}, |
| {0x9389, 0x55}, |
| {0x938a, 0x00}, |
| {0x938b, 0x55}, |
| {0x938c, 0x00}, |
| {0x938d, 0x41}, |
| {0x5078, 0x01}, |
| {0x0112, 0x0a}, |
| {0x0113, 0x0a}, |
| {0x0114, 0x03}, |
| {0x0342, 0x11}, |
| {0x0343, 0xa0}, |
| {0x0340, 0x0d}, |
| {0x0341, 0xda}, |
| {0x3210, 0x00}, |
| {0x0344, 0x00}, |
| {0x0345, 0x00}, |
| {0x0346, 0x00}, |
| {0x0347, 0x00}, |
| {0x0348, 0x0f}, |
| {0x0349, 0xd7}, |
| {0x034a, 0x0b}, |
| {0x034b, 0xdf}, |
| {0x00e3, 0x00}, |
| {0x00e4, 0x00}, |
| {0x00e5, 0x01}, |
| {0x00fc, 0x0a}, |
| {0x00fd, 0x0a}, |
| {0x00fe, 0x0a}, |
| {0x00ff, 0x0a}, |
| {0xe013, 0x00}, |
| {0x0220, 0x00}, |
| {0x0221, 0x11}, |
| {0x0381, 0x01}, |
| {0x0383, 0x01}, |
| {0x0385, 0x01}, |
| {0x0387, 0x01}, |
| {0x0900, 0x00}, |
| {0x0901, 0x11}, |
| {0x0902, 0x00}, |
| {0x3140, 0x02}, |
| {0x3241, 0x11}, |
| {0x3250, 0x03}, |
| {0x3e10, 0x00}, |
| {0x3e11, 0x00}, |
| {0x3f0d, 0x00}, |
| {0x3f42, 0x00}, |
| {0x3f43, 0x00}, |
| {0x0401, 0x00}, |
| {0x0404, 0x00}, |
| {0x0405, 0x10}, |
| {0x0408, 0x00}, |
| {0x0409, 0x00}, |
| {0x040a, 0x00}, |
| {0x040b, 0x00}, |
| {0x040c, 0x0f}, |
| {0x040d, 0xd8}, |
| {0x040e, 0x0b}, |
| {0x040f, 0xe0}, |
| {0x034c, 0x0f}, |
| {0x034d, 0xd8}, |
| {0x034e, 0x0b}, |
| {0x034f, 0xe0}, |
| {0x0301, 0x05}, |
| {0x0303, 0x02}, |
| {0x0305, 0x04}, |
| {0x0306, 0x00}, |
| {0x0307, 0xc8}, |
| {0x0309, 0x0a}, |
| {0x030b, 0x01}, |
| {0x030d, 0x02}, |
| {0x030e, 0x01}, |
| {0x030f, 0x5e}, |
| {0x0310, 0x00}, |
| {0x0820, 0x12}, |
| {0x0821, 0xc0}, |
| {0x0822, 0x00}, |
| {0x0823, 0x00}, |
| {0x3e20, 0x01}, |
| {0x3e37, 0x00}, |
| {0x3f50, 0x00}, |
| {0x3f56, 0x00}, |
| {0x3f57, 0xe2}, |
| {0x3c0a, 0x5a}, |
| {0x3c0b, 0x55}, |
| {0x3c0c, 0x28}, |
| {0x3c0d, 0x07}, |
| {0x3c0e, 0xff}, |
| {0x3c0f, 0x00}, |
| {0x3c10, 0x00}, |
| {0x3c11, 0x02}, |
| {0x3c12, 0x00}, |
| {0x3c13, 0x03}, |
| {0x3c14, 0x00}, |
| {0x3c15, 0x00}, |
| {0x3c16, 0x0c}, |
| {0x3c17, 0x0c}, |
| {0x3c18, 0x0c}, |
| {0x3c19, 0x0a}, |
| {0x3c1a, 0x0a}, |
| {0x3c1b, 0x0a}, |
| {0x3c1c, 0x00}, |
| {0x3c1d, 0x00}, |
| {0x3c1e, 0x00}, |
| {0x3c1f, 0x00}, |
| {0x3c20, 0x00}, |
| {0x3c21, 0x00}, |
| {0x3c22, 0x3f}, |
| {0x3c23, 0x0a}, |
| {0x3e35, 0x01}, |
| {0x3f4a, 0x03}, |
| {0x3f4b, 0xbf}, |
| {0x3f26, 0x00}, |
| {0x0202, 0x0d}, |
| {0x0203, 0xc4}, |
| {0x0204, 0x00}, |
| {0x0205, 0x00}, |
| {0x020e, 0x01}, |
| {0x020f, 0x00}, |
| {0x0210, 0x01}, |
| {0x0211, 0x00}, |
| {0x0212, 0x01}, |
| {0x0213, 0x00}, |
| {0x0214, 0x01}, |
| {0x0215, 0x00}, |
| {0xbcf1, 0x00}, |
| }; |
| |
| /* Supported sensor mode configurations */ |
| static const struct imx412_mode supported_mode = { |
| .width = 4056, |
| .height = 3040, |
| .hblank = 456, |
| .vblank = 506, |
| .vblank_min = 506, |
| .vblank_max = 32420, |
| .pclk = 480000000, |
| .link_freq_idx = 0, |
| .code = MEDIA_BUS_FMT_SRGGB10_1X10, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs), |
| .regs = mode_4056x3040_regs, |
| }, |
| }; |
| |
| /** |
| * to_imx412() - imx412 V4L2 sub-device to imx412 device. |
| * @subdev: pointer to imx412 V4L2 sub-device |
| * |
| * Return: pointer to imx412 device |
| */ |
| static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct imx412, sd); |
| } |
| |
| /** |
| * imx412_read_reg() - Read registers. |
| * @imx412: pointer to imx412 device |
| * @reg: register address |
| * @len: length of bytes to read. Max supported bytes is 4 |
| * @val: pointer to register value to be filled. |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); |
| struct i2c_msg msgs[2] = {0}; |
| u8 addr_buf[2] = {0}; |
| u8 data_buf[4] = {0}; |
| int ret; |
| |
| if (WARN_ON(len > 4)) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, addr_buf); |
| |
| /* Write register address */ |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = ARRAY_SIZE(addr_buf); |
| msgs[0].buf = addr_buf; |
| |
| /* Read data from register */ |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = len; |
| msgs[1].buf = &data_buf[4 - len]; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) |
| return -EIO; |
| |
| *val = get_unaligned_be32(data_buf); |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_write_reg() - Write register |
| * @imx412: pointer to imx412 device |
| * @reg: register address |
| * @len: length of bytes. Max supported bytes is 4 |
| * @val: register value |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); |
| u8 buf[6] = {0}; |
| |
| if (WARN_ON(len > 4)) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, buf); |
| put_unaligned_be32(val << (8 * (4 - len)), buf + 2); |
| if (i2c_master_send(client, buf, len + 2) != len + 2) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_write_regs() - Write a list of registers |
| * @imx412: pointer to imx412 device |
| * @regs: list of registers to be written |
| * @len: length of registers array |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_write_regs(struct imx412 *imx412, |
| const struct imx412_reg *regs, u32 len) |
| { |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < len; i++) { |
| ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_update_controls() - Update control ranges based on streaming mode |
| * @imx412: pointer to imx412 device |
| * @mode: pointer to imx412_mode sensor mode |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_update_controls(struct imx412 *imx412, |
| const struct imx412_mode *mode) |
| { |
| int ret; |
| |
| ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx); |
| if (ret) |
| return ret; |
| |
| ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank); |
| if (ret) |
| return ret; |
| |
| return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min, |
| mode->vblank_max, 1, mode->vblank); |
| } |
| |
| /** |
| * imx412_update_exp_gain() - Set updated exposure and gain |
| * @imx412: pointer to imx412 device |
| * @exposure: updated exposure value |
| * @gain: updated analog gain value |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain) |
| { |
| u32 lpfr, shutter; |
| int ret; |
| |
| lpfr = imx412->vblank + imx412->cur_mode->height; |
| shutter = lpfr - exposure; |
| |
| dev_dbg(imx412->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u", |
| exposure, gain, shutter, lpfr); |
| |
| ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1); |
| if (ret) |
| return ret; |
| |
| ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr); |
| if (ret) |
| goto error_release_group_hold; |
| |
| ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, shutter); |
| if (ret) |
| goto error_release_group_hold; |
| |
| ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain); |
| |
| error_release_group_hold: |
| imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * imx412_set_ctrl() - Set subdevice control |
| * @ctrl: pointer to v4l2_ctrl structure |
| * |
| * Supported controls: |
| * - V4L2_CID_VBLANK |
| * - cluster controls: |
| * - V4L2_CID_ANALOGUE_GAIN |
| * - V4L2_CID_EXPOSURE |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct imx412 *imx412 = |
| container_of(ctrl->handler, struct imx412, ctrl_handler); |
| u32 analog_gain; |
| u32 exposure; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VBLANK: |
| imx412->vblank = imx412->vblank_ctrl->val; |
| |
| dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u", |
| imx412->vblank, |
| imx412->vblank + imx412->cur_mode->height); |
| |
| ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl, |
| IMX412_EXPOSURE_MIN, |
| imx412->vblank + |
| imx412->cur_mode->height - |
| IMX412_EXPOSURE_OFFSET, |
| 1, IMX412_EXPOSURE_DEFAULT); |
| break; |
| case V4L2_CID_EXPOSURE: |
| /* Set controls only if sensor is in power on state */ |
| if (!pm_runtime_get_if_in_use(imx412->dev)) |
| return 0; |
| |
| exposure = ctrl->val; |
| analog_gain = imx412->again_ctrl->val; |
| |
| dev_dbg(imx412->dev, "Received exp %u, analog gain %u", |
| exposure, analog_gain); |
| |
| ret = imx412_update_exp_gain(imx412, exposure, analog_gain); |
| |
| pm_runtime_put(imx412->dev); |
| |
| break; |
| default: |
| dev_err(imx412->dev, "Invalid control %d", ctrl->id); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /* V4l2 subdevice control ops*/ |
| static const struct v4l2_ctrl_ops imx412_ctrl_ops = { |
| .s_ctrl = imx412_set_ctrl, |
| }; |
| |
| /** |
| * imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes |
| * @sd: pointer to imx412 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device configuration |
| * @code: V4L2 sub-device code enumeration need to be filled |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = supported_mode.code; |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes |
| * @sd: pointer to imx412 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device configuration |
| * @fsize: V4L2 sub-device size enumeration need to be filled |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fsize) |
| { |
| if (fsize->index > 0) |
| return -EINVAL; |
| |
| if (fsize->code != supported_mode.code) |
| return -EINVAL; |
| |
| fsize->min_width = supported_mode.width; |
| fsize->max_width = fsize->min_width; |
| fsize->min_height = supported_mode.height; |
| fsize->max_height = fsize->min_height; |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_fill_pad_format() - Fill subdevice pad format |
| * from selected sensor mode |
| * @imx412: pointer to imx412 device |
| * @mode: pointer to imx412_mode sensor mode |
| * @fmt: V4L2 sub-device format need to be filled |
| */ |
| static void imx412_fill_pad_format(struct imx412 *imx412, |
| const struct imx412_mode *mode, |
| struct v4l2_subdev_format *fmt) |
| { |
| fmt->format.width = mode->width; |
| fmt->format.height = mode->height; |
| fmt->format.code = mode->code; |
| fmt->format.field = V4L2_FIELD_NONE; |
| fmt->format.colorspace = V4L2_COLORSPACE_RAW; |
| fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; |
| fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; |
| fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; |
| } |
| |
| /** |
| * imx412_get_pad_format() - Get subdevice pad format |
| * @sd: pointer to imx412 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device configuration |
| * @fmt: V4L2 sub-device format need to be set |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_get_pad_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx412 *imx412 = to_imx412(sd); |
| |
| mutex_lock(&imx412->mutex); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *framefmt; |
| |
| framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); |
| fmt->format = *framefmt; |
| } else { |
| imx412_fill_pad_format(imx412, imx412->cur_mode, fmt); |
| } |
| |
| mutex_unlock(&imx412->mutex); |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_set_pad_format() - Set subdevice pad format |
| * @sd: pointer to imx412 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device configuration |
| * @fmt: V4L2 sub-device format need to be set |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_set_pad_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct imx412 *imx412 = to_imx412(sd); |
| const struct imx412_mode *mode; |
| int ret = 0; |
| |
| mutex_lock(&imx412->mutex); |
| |
| mode = &supported_mode; |
| imx412_fill_pad_format(imx412, mode, fmt); |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| struct v4l2_mbus_framefmt *framefmt; |
| |
| framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); |
| *framefmt = fmt->format; |
| } else { |
| ret = imx412_update_controls(imx412, mode); |
| if (!ret) |
| imx412->cur_mode = mode; |
| } |
| |
| mutex_unlock(&imx412->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx412_init_pad_cfg() - Initialize sub-device pad configuration |
| * @sd: pointer to imx412 V4L2 sub-device structure |
| * @sd_state: V4L2 sub-device configuration |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_init_pad_cfg(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state) |
| { |
| struct imx412 *imx412 = to_imx412(sd); |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; |
| imx412_fill_pad_format(imx412, &supported_mode, &fmt); |
| |
| return imx412_set_pad_format(sd, sd_state, &fmt); |
| } |
| |
| /** |
| * imx412_start_streaming() - Start sensor stream |
| * @imx412: pointer to imx412 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_start_streaming(struct imx412 *imx412) |
| { |
| const struct imx412_reg_list *reg_list; |
| int ret; |
| |
| /* Write sensor mode registers */ |
| reg_list = &imx412->cur_mode->reg_list; |
| ret = imx412_write_regs(imx412, reg_list->regs, |
| reg_list->num_of_regs); |
| if (ret) { |
| dev_err(imx412->dev, "fail to write initial registers"); |
| return ret; |
| } |
| |
| /* Setup handler will write actual exposure and gain */ |
| ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler); |
| if (ret) { |
| dev_err(imx412->dev, "fail to setup handler"); |
| return ret; |
| } |
| |
| /* Delay is required before streaming*/ |
| usleep_range(7400, 8000); |
| |
| /* Start streaming */ |
| ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, |
| 1, IMX412_MODE_STREAMING); |
| if (ret) { |
| dev_err(imx412->dev, "fail to start streaming"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_stop_streaming() - Stop sensor stream |
| * @imx412: pointer to imx412 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_stop_streaming(struct imx412 *imx412) |
| { |
| return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, |
| 1, IMX412_MODE_STANDBY); |
| } |
| |
| /** |
| * imx412_set_stream() - Enable sensor streaming |
| * @sd: pointer to imx412 subdevice |
| * @enable: set to enable sensor streaming |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct imx412 *imx412 = to_imx412(sd); |
| int ret; |
| |
| mutex_lock(&imx412->mutex); |
| |
| if (imx412->streaming == enable) { |
| mutex_unlock(&imx412->mutex); |
| return 0; |
| } |
| |
| if (enable) { |
| ret = pm_runtime_resume_and_get(imx412->dev); |
| if (ret) |
| goto error_unlock; |
| |
| ret = imx412_start_streaming(imx412); |
| if (ret) |
| goto error_power_off; |
| } else { |
| imx412_stop_streaming(imx412); |
| pm_runtime_put(imx412->dev); |
| } |
| |
| imx412->streaming = enable; |
| |
| mutex_unlock(&imx412->mutex); |
| |
| return 0; |
| |
| error_power_off: |
| pm_runtime_put(imx412->dev); |
| error_unlock: |
| mutex_unlock(&imx412->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx412_detect() - Detect imx412 sensor |
| * @imx412: pointer to imx412 device |
| * |
| * Return: 0 if successful, -EIO if sensor id does not match |
| */ |
| static int imx412_detect(struct imx412 *imx412) |
| { |
| int ret; |
| u32 val; |
| |
| ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val); |
| if (ret) |
| return ret; |
| |
| if (val != IMX412_ID) { |
| dev_err(imx412->dev, "chip id mismatch: %x!=%x", |
| IMX412_ID, val); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_parse_hw_config() - Parse HW configuration and check if supported |
| * @imx412: pointer to imx412 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_parse_hw_config(struct imx412 *imx412) |
| { |
| struct fwnode_handle *fwnode = dev_fwnode(imx412->dev); |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| struct fwnode_handle *ep; |
| unsigned long rate; |
| unsigned int i; |
| int ret; |
| |
| if (!fwnode) |
| return -ENXIO; |
| |
| /* Request optional reset pin */ |
| imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(imx412->reset_gpio)) { |
| dev_err(imx412->dev, "failed to get reset gpio %ld", |
| PTR_ERR(imx412->reset_gpio)); |
| return PTR_ERR(imx412->reset_gpio); |
| } |
| |
| /* Get sensor input clock */ |
| imx412->inclk = devm_clk_get(imx412->dev, NULL); |
| if (IS_ERR(imx412->inclk)) { |
| dev_err(imx412->dev, "could not get inclk"); |
| return PTR_ERR(imx412->inclk); |
| } |
| |
| rate = clk_get_rate(imx412->inclk); |
| if (rate != IMX412_INCLK_RATE) { |
| dev_err(imx412->dev, "inclk frequency mismatch"); |
| return -EINVAL; |
| } |
| |
| ep = fwnode_graph_get_next_endpoint(fwnode, NULL); |
| if (!ep) |
| return -ENXIO; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return ret; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) { |
| dev_err(imx412->dev, |
| "number of CSI2 data lanes %d is not supported", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| ret = -EINVAL; |
| goto done_endpoint_free; |
| } |
| |
| if (!bus_cfg.nr_of_link_frequencies) { |
| dev_err(imx412->dev, "no link frequencies defined"); |
| ret = -EINVAL; |
| goto done_endpoint_free; |
| } |
| |
| for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) |
| if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ) |
| goto done_endpoint_free; |
| |
| ret = -EINVAL; |
| |
| done_endpoint_free: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| |
| return ret; |
| } |
| |
| /* V4l2 subdevice ops */ |
| static const struct v4l2_subdev_video_ops imx412_video_ops = { |
| .s_stream = imx412_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops imx412_pad_ops = { |
| .init_cfg = imx412_init_pad_cfg, |
| .enum_mbus_code = imx412_enum_mbus_code, |
| .enum_frame_size = imx412_enum_frame_size, |
| .get_fmt = imx412_get_pad_format, |
| .set_fmt = imx412_set_pad_format, |
| }; |
| |
| static const struct v4l2_subdev_ops imx412_subdev_ops = { |
| .video = &imx412_video_ops, |
| .pad = &imx412_pad_ops, |
| }; |
| |
| /** |
| * imx412_power_on() - Sensor power on sequence |
| * @dev: pointer to i2c device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_power_on(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx412 *imx412 = to_imx412(sd); |
| int ret; |
| |
| gpiod_set_value_cansleep(imx412->reset_gpio, 1); |
| |
| ret = clk_prepare_enable(imx412->inclk); |
| if (ret) { |
| dev_err(imx412->dev, "fail to enable inclk"); |
| goto error_reset; |
| } |
| |
| usleep_range(1000, 1200); |
| |
| return 0; |
| |
| error_reset: |
| gpiod_set_value_cansleep(imx412->reset_gpio, 0); |
| |
| return ret; |
| } |
| |
| /** |
| * imx412_power_off() - Sensor power off sequence |
| * @dev: pointer to i2c device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_power_off(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct imx412 *imx412 = to_imx412(sd); |
| |
| gpiod_set_value_cansleep(imx412->reset_gpio, 0); |
| |
| clk_disable_unprepare(imx412->inclk); |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_init_controls() - Initialize sensor subdevice controls |
| * @imx412: pointer to imx412 device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_init_controls(struct imx412 *imx412) |
| { |
| struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler; |
| const struct imx412_mode *mode = imx412->cur_mode; |
| u32 lpfr; |
| int ret; |
| |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6); |
| if (ret) |
| return ret; |
| |
| /* Serialize controls with sensor device */ |
| ctrl_hdlr->lock = &imx412->mutex; |
| |
| /* Initialize exposure and gain */ |
| lpfr = mode->vblank + mode->height; |
| imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| IMX412_EXPOSURE_MIN, |
| lpfr - IMX412_EXPOSURE_OFFSET, |
| IMX412_EXPOSURE_STEP, |
| IMX412_EXPOSURE_DEFAULT); |
| |
| imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_ANALOGUE_GAIN, |
| IMX412_AGAIN_MIN, |
| IMX412_AGAIN_MAX, |
| IMX412_AGAIN_STEP, |
| IMX412_AGAIN_DEFAULT); |
| |
| v4l2_ctrl_cluster(2, &imx412->exp_ctrl); |
| |
| imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_VBLANK, |
| mode->vblank_min, |
| mode->vblank_max, |
| 1, mode->vblank); |
| |
| /* Read only controls */ |
| imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, |
| mode->pclk, mode->pclk, |
| 1, mode->pclk); |
| |
| imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq) - |
| 1, |
| mode->link_freq_idx, |
| link_freq); |
| if (imx412->link_freq_ctrl) |
| imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, |
| &imx412_ctrl_ops, |
| V4L2_CID_HBLANK, |
| IMX412_REG_MIN, |
| IMX412_REG_MAX, |
| 1, mode->hblank); |
| if (imx412->hblank_ctrl) |
| imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| if (ctrl_hdlr->error) { |
| dev_err(imx412->dev, "control init failed: %d", |
| ctrl_hdlr->error); |
| v4l2_ctrl_handler_free(ctrl_hdlr); |
| return ctrl_hdlr->error; |
| } |
| |
| imx412->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| } |
| |
| /** |
| * imx412_probe() - I2C client device binding |
| * @client: pointer to i2c client device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_probe(struct i2c_client *client) |
| { |
| struct imx412 *imx412; |
| int ret; |
| |
| imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL); |
| if (!imx412) |
| return -ENOMEM; |
| |
| imx412->dev = &client->dev; |
| |
| /* Initialize subdev */ |
| v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops); |
| |
| ret = imx412_parse_hw_config(imx412); |
| if (ret) { |
| dev_err(imx412->dev, "HW configuration is not supported"); |
| return ret; |
| } |
| |
| mutex_init(&imx412->mutex); |
| |
| ret = imx412_power_on(imx412->dev); |
| if (ret) { |
| dev_err(imx412->dev, "failed to power-on the sensor"); |
| goto error_mutex_destroy; |
| } |
| |
| /* Check module identity */ |
| ret = imx412_detect(imx412); |
| if (ret) { |
| dev_err(imx412->dev, "failed to find sensor: %d", ret); |
| goto error_power_off; |
| } |
| |
| /* Set default mode to max resolution */ |
| imx412->cur_mode = &supported_mode; |
| imx412->vblank = imx412->cur_mode->vblank; |
| |
| ret = imx412_init_controls(imx412); |
| if (ret) { |
| dev_err(imx412->dev, "failed to init controls: %d", ret); |
| goto error_power_off; |
| } |
| |
| /* Initialize subdev */ |
| imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| /* Initialize source pad */ |
| imx412->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad); |
| if (ret) { |
| dev_err(imx412->dev, "failed to init entity pads: %d", ret); |
| goto error_handler_free; |
| } |
| |
| ret = v4l2_async_register_subdev_sensor(&imx412->sd); |
| if (ret < 0) { |
| dev_err(imx412->dev, |
| "failed to register async subdev: %d", ret); |
| goto error_media_entity; |
| } |
| |
| pm_runtime_set_active(imx412->dev); |
| pm_runtime_enable(imx412->dev); |
| pm_runtime_idle(imx412->dev); |
| |
| return 0; |
| |
| error_media_entity: |
| media_entity_cleanup(&imx412->sd.entity); |
| error_handler_free: |
| v4l2_ctrl_handler_free(imx412->sd.ctrl_handler); |
| error_power_off: |
| imx412_power_off(imx412->dev); |
| error_mutex_destroy: |
| mutex_destroy(&imx412->mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * imx412_remove() - I2C client device unbinding |
| * @client: pointer to I2C client device |
| * |
| * Return: 0 if successful, error code otherwise. |
| */ |
| static int imx412_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx412 *imx412 = to_imx412(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| |
| pm_runtime_disable(&client->dev); |
| if (!pm_runtime_status_suspended(&client->dev)) |
| imx412_power_off(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| |
| mutex_destroy(&imx412->mutex); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops imx412_pm_ops = { |
| SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL) |
| }; |
| |
| static const struct of_device_id imx412_of_match[] = { |
| { .compatible = "sony,imx412" }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, imx412_of_match); |
| |
| static struct i2c_driver imx412_driver = { |
| .probe_new = imx412_probe, |
| .remove = imx412_remove, |
| .driver = { |
| .name = "imx412", |
| .pm = &imx412_pm_ops, |
| .of_match_table = imx412_of_match, |
| }, |
| }; |
| |
| module_i2c_driver(imx412_driver); |
| |
| MODULE_DESCRIPTION("Sony imx412 sensor driver"); |
| MODULE_LICENSE("GPL"); |