| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2015-2017 Intel Deutschland GmbH |
| * Copyright (C) 2018 Intel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2015-2017 Intel Deutschland GmbH |
| * Copyright (C) 2018 Intel Corporation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/stringify.h> |
| #include "iwl-config.h" |
| |
| /* Highest firmware API version supported */ |
| #define IWL_22000_UCODE_API_MAX 41 |
| |
| /* Lowest firmware API version supported */ |
| #define IWL_22000_UCODE_API_MIN 39 |
| |
| /* NVM versions */ |
| #define IWL_22000_NVM_VERSION 0x0a1d |
| #define IWL_22000_TX_POWER_VERSION 0xffff /* meaningless */ |
| |
| /* Memory offsets and lengths */ |
| #define IWL_22000_DCCM_OFFSET 0x800000 /* LMAC1 */ |
| #define IWL_22000_DCCM_LEN 0x10000 /* LMAC1 */ |
| #define IWL_22000_DCCM2_OFFSET 0x880000 |
| #define IWL_22000_DCCM2_LEN 0x8000 |
| #define IWL_22000_SMEM_OFFSET 0x400000 |
| #define IWL_22000_SMEM_LEN 0xD0000 |
| |
| #define IWL_22000_JF_FW_PRE "iwlwifi-Qu-a0-jf-b0-" |
| #define IWL_22000_HR_FW_PRE "iwlwifi-Qu-a0-hr-a0-" |
| #define IWL_22000_HR_CDB_FW_PRE "iwlwifi-QuIcp-z0-hrcdb-a0-" |
| #define IWL_22000_HR_A_F0_FW_PRE "iwlwifi-QuQnj-f0-hr-a0-" |
| #define IWL_22000_HR_B_F0_FW_PRE "iwlwifi-Qu-b0-hr-b0-" |
| #define IWL_22000_QU_B_HR_B_FW_PRE "iwlwifi-Qu-b0-hr-b0-" |
| #define IWL_22000_HR_B_FW_PRE "iwlwifi-QuQnj-b0-hr-b0-" |
| #define IWL_22000_JF_B0_FW_PRE "iwlwifi-QuQnj-a0-jf-b0-" |
| #define IWL_22000_HR_A0_FW_PRE "iwlwifi-QuQnj-a0-hr-a0-" |
| #define IWL_22000_SU_Z0_FW_PRE "iwlwifi-su-z0-" |
| #define IWL_QU_B_JF_B_FW_PRE "iwlwifi-Qu-b0-jf-b0-" |
| |
| #define IWL_22000_HR_MODULE_FIRMWARE(api) \ |
| IWL_22000_HR_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_JF_MODULE_FIRMWARE(api) \ |
| IWL_22000_JF_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(api) \ |
| IWL_22000_HR_A_F0_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_HR_B_F0_QNJ_MODULE_FIRMWARE(api) \ |
| IWL_22000_HR_B_F0_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_QU_B_HR_B_MODULE_FIRMWARE(api) \ |
| IWL_22000_QU_B_HR_B_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(api) \ |
| IWL_22000_HR_B_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_JF_B0_QNJ_MODULE_FIRMWARE(api) \ |
| IWL_22000_JF_B0_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_HR_A0_QNJ_MODULE_FIRMWARE(api) \ |
| IWL_22000_HR_A0_FW_PRE __stringify(api) ".ucode" |
| #define IWL_22000_SU_Z0_MODULE_FIRMWARE(api) \ |
| IWL_22000_SU_Z0_FW_PRE __stringify(api) ".ucode" |
| #define IWL_QU_B_JF_B_MODULE_FIRMWARE(api) \ |
| IWL_QU_B_JF_B_FW_PRE __stringify(api) ".ucode" |
| |
| #define NVM_HW_SECTION_NUM_FAMILY_22000 10 |
| |
| static const struct iwl_base_params iwl_22000_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_22000, |
| .num_of_queues = 512, |
| .max_tfd_queue_size = 256, |
| .shadow_ram_support = true, |
| .led_compensation = 57, |
| .wd_timeout = IWL_LONG_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| .pcie_l1_allowed = true, |
| }; |
| |
| static const struct iwl_base_params iwl_22560_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE_FAMILY_22000, |
| .num_of_queues = 512, |
| .max_tfd_queue_size = 65536, |
| .shadow_ram_support = true, |
| .led_compensation = 57, |
| .wd_timeout = IWL_LONG_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| .pcie_l1_allowed = true, |
| }; |
| |
| static const struct iwl_ht_params iwl_22000_ht_params = { |
| .stbc = true, |
| .ldpc = true, |
| .ht40_bands = BIT(NL80211_BAND_2GHZ) | BIT(NL80211_BAND_5GHZ), |
| }; |
| |
| #define IWL_DEVICE_22000_COMMON \ |
| .ucode_api_max = IWL_22000_UCODE_API_MAX, \ |
| .ucode_api_min = IWL_22000_UCODE_API_MIN, \ |
| .led_mode = IWL_LED_RF_STATE, \ |
| .nvm_hw_section_num = NVM_HW_SECTION_NUM_FAMILY_22000, \ |
| .non_shared_ant = ANT_B, \ |
| .dccm_offset = IWL_22000_DCCM_OFFSET, \ |
| .dccm_len = IWL_22000_DCCM_LEN, \ |
| .dccm2_offset = IWL_22000_DCCM2_OFFSET, \ |
| .dccm2_len = IWL_22000_DCCM2_LEN, \ |
| .smem_offset = IWL_22000_SMEM_OFFSET, \ |
| .smem_len = IWL_22000_SMEM_LEN, \ |
| .features = IWL_TX_CSUM_NETIF_FLAGS | NETIF_F_RXCSUM, \ |
| .apmg_not_supported = true, \ |
| .mq_rx_supported = true, \ |
| .vht_mu_mimo_supported = true, \ |
| .mac_addr_from_csr = true, \ |
| .ht_params = &iwl_22000_ht_params, \ |
| .nvm_ver = IWL_22000_NVM_VERSION, \ |
| .nvm_calib_ver = IWL_22000_TX_POWER_VERSION, \ |
| .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, \ |
| .use_tfh = true, \ |
| .rf_id = true, \ |
| .gen2 = true, \ |
| .nvm_type = IWL_NVM_EXT, \ |
| .dbgc_supported = true, \ |
| .min_umac_error_event_table = 0x400000, \ |
| .d3_debug_data_base_addr = 0x401000, \ |
| .d3_debug_data_length = 60 * 1024 |
| |
| #define IWL_DEVICE_22500 \ |
| IWL_DEVICE_22000_COMMON, \ |
| .device_family = IWL_DEVICE_FAMILY_22000, \ |
| .base_params = &iwl_22000_base_params, \ |
| .csr = &iwl_csr_v1 |
| |
| #define IWL_DEVICE_22560 \ |
| IWL_DEVICE_22000_COMMON, \ |
| .device_family = IWL_DEVICE_FAMILY_22560, \ |
| .base_params = &iwl_22560_base_params, \ |
| .csr = &iwl_csr_v2 |
| |
| const struct iwl_cfg iwl22000_2ac_cfg_hr = { |
| .name = "Intel(R) Dual Band Wireless AC 22000", |
| .fw_name_pre = IWL_22000_HR_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb = { |
| .name = "Intel(R) Dual Band Wireless AC 22000", |
| .fw_name_pre = IWL_22000_HR_CDB_FW_PRE, |
| IWL_DEVICE_22500, |
| .cdb = true, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ac_cfg_jf = { |
| .name = "Intel(R) Dual Band Wireless AC 22000", |
| .fw_name_pre = IWL_22000_JF_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_hr = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| /* |
| * All JF radio modules are part of the 9000 series, but the MAC part |
| * looks more like 22000. That's why this device is here, but called |
| * 9560 nevertheless. |
| */ |
| const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0 = { |
| .name = "Intel(R) Wireless-AC 9461", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg iwl9462_2ac_cfg_qu_b0_jf_b0 = { |
| .name = "Intel(R) Wireless-AC 9462", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg iwl9560_2ac_cfg_qu_b0_jf_b0 = { |
| .name = "Intel(R) Wireless-AC 9560", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg killer1550i_2ac_cfg_qu_b0_jf_b0 = { |
| .name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg killer1550s_2ac_cfg_qu_b0_jf_b0 = { |
| .name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_jf = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0_f0 = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_22000_HR_A_F0_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0 = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_22000_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_qnj_jf_b0 = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_22000_JF_B0_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0 = { |
| .name = "Intel(R) Dual Band Wireless AX 22000", |
| .fw_name_pre = IWL_22000_HR_A0_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| const struct iwl_cfg iwl22560_2ax_cfg_su_cdb = { |
| .name = "Intel(R) Dual Band Wireless AX 22560", |
| .fw_name_pre = IWL_22000_SU_Z0_FW_PRE, |
| IWL_DEVICE_22560, |
| .cdb = true, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| }; |
| |
| MODULE_FIRMWARE(IWL_22000_HR_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_JF_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_HR_B_F0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_QU_B_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_JF_B0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_HR_A0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_22000_SU_Z0_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_QU_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |