| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2012,2013 - ARM Ltd |
| * Author: Marc Zyngier <marc.zyngier@arm.com> |
| */ |
| |
| #include <linux/linkage.h> |
| |
| #include <asm/alternative.h> |
| #include <asm/assembler.h> |
| #include <asm/kvm_arm.h> |
| #include <asm/kvm_mmu.h> |
| #include <asm/pgtable-hwdef.h> |
| #include <asm/sysreg.h> |
| #include <asm/virt.h> |
| |
| .text |
| .pushsection .hyp.idmap.text, "ax" |
| |
| .align 11 |
| |
| SYM_CODE_START(__kvm_hyp_init) |
| ventry __invalid // Synchronous EL2t |
| ventry __invalid // IRQ EL2t |
| ventry __invalid // FIQ EL2t |
| ventry __invalid // Error EL2t |
| |
| ventry __invalid // Synchronous EL2h |
| ventry __invalid // IRQ EL2h |
| ventry __invalid // FIQ EL2h |
| ventry __invalid // Error EL2h |
| |
| ventry __do_hyp_init // Synchronous 64-bit EL1 |
| ventry __invalid // IRQ 64-bit EL1 |
| ventry __invalid // FIQ 64-bit EL1 |
| ventry __invalid // Error 64-bit EL1 |
| |
| ventry __invalid // Synchronous 32-bit EL1 |
| ventry __invalid // IRQ 32-bit EL1 |
| ventry __invalid // FIQ 32-bit EL1 |
| ventry __invalid // Error 32-bit EL1 |
| |
| __invalid: |
| b . |
| |
| /* |
| * x0: HYP pgd |
| * x1: HYP stack |
| * x2: HYP vectors |
| * x3: per-CPU offset |
| */ |
| __do_hyp_init: |
| /* Check for a stub HVC call */ |
| cmp x0, #HVC_STUB_HCALL_NR |
| b.lo __kvm_handle_stub_hvc |
| |
| phys_to_ttbr x4, x0 |
| alternative_if ARM64_HAS_CNP |
| orr x4, x4, #TTBR_CNP_BIT |
| alternative_else_nop_endif |
| msr ttbr0_el2, x4 |
| |
| mrs x4, tcr_el1 |
| mov_q x5, TCR_EL2_MASK |
| and x4, x4, x5 |
| mov x5, #TCR_EL2_RES1 |
| orr x4, x4, x5 |
| |
| /* |
| * The ID map may be configured to use an extended virtual address |
| * range. This is only the case if system RAM is out of range for the |
| * currently configured page size and VA_BITS, in which case we will |
| * also need the extended virtual range for the HYP ID map, or we won't |
| * be able to enable the EL2 MMU. |
| * |
| * However, at EL2, there is only one TTBR register, and we can't switch |
| * between translation tables *and* update TCR_EL2.T0SZ at the same |
| * time. Bottom line: we need to use the extended range with *both* our |
| * translation tables. |
| * |
| * So use the same T0SZ value we use for the ID map. |
| */ |
| ldr_l x5, idmap_t0sz |
| bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH |
| |
| /* |
| * Set the PS bits in TCR_EL2. |
| */ |
| tcr_compute_pa_size x4, #TCR_EL2_PS_SHIFT, x5, x6 |
| |
| msr tcr_el2, x4 |
| |
| mrs x4, mair_el1 |
| msr mair_el2, x4 |
| isb |
| |
| /* Invalidate the stale TLBs from Bootloader */ |
| tlbi alle2 |
| dsb sy |
| |
| /* |
| * Preserve all the RES1 bits while setting the default flags, |
| * as well as the EE bit on BE. Drop the A flag since the compiler |
| * is allowed to generate unaligned accesses. |
| */ |
| mov_q x4, (SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A)) |
| CPU_BE( orr x4, x4, #SCTLR_ELx_EE) |
| alternative_if ARM64_HAS_ADDRESS_AUTH |
| mov_q x5, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \ |
| SCTLR_ELx_ENDA | SCTLR_ELx_ENDB) |
| orr x4, x4, x5 |
| alternative_else_nop_endif |
| msr sctlr_el2, x4 |
| isb |
| |
| /* Set the stack and new vectors */ |
| kern_hyp_va x1 |
| mov sp, x1 |
| msr vbar_el2, x2 |
| |
| /* Set tpidr_el2 for use by HYP */ |
| msr tpidr_el2, x3 |
| |
| /* Hello, World! */ |
| eret |
| SYM_CODE_END(__kvm_hyp_init) |
| |
| SYM_CODE_START(__kvm_handle_stub_hvc) |
| cmp x0, #HVC_SOFT_RESTART |
| b.ne 1f |
| |
| /* This is where we're about to jump, staying at EL2 */ |
| msr elr_el2, x1 |
| mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT | PSR_MODE_EL2h) |
| msr spsr_el2, x0 |
| |
| /* Shuffle the arguments, and don't come back */ |
| mov x0, x2 |
| mov x1, x3 |
| mov x2, x4 |
| b reset |
| |
| 1: cmp x0, #HVC_RESET_VECTORS |
| b.ne 1f |
| |
| /* |
| * Set the HVC_RESET_VECTORS return code before entering the common |
| * path so that we do not clobber x0-x2 in case we are coming via |
| * HVC_SOFT_RESTART. |
| */ |
| mov x0, xzr |
| reset: |
| /* Reset kvm back to the hyp stub. */ |
| mrs x5, sctlr_el2 |
| mov_q x6, SCTLR_ELx_FLAGS |
| bic x5, x5, x6 // Clear SCTL_M and etc |
| pre_disable_mmu_workaround |
| msr sctlr_el2, x5 |
| isb |
| |
| /* Install stub vectors */ |
| adr_l x5, __hyp_stub_vectors |
| msr vbar_el2, x5 |
| eret |
| |
| 1: /* Bad stub call */ |
| mov_q x0, HVC_STUB_ERR |
| eret |
| |
| SYM_CODE_END(__kvm_handle_stub_hvc) |
| |
| .popsection |
