| /* |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| * Copyright 2016 Toradex AG |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/clock/imx7d-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include "imx7d-pinfunc.h" |
| #include "skeleton.dtsi" |
| |
| / { |
| aliases { |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| gpio5 = &gpio6; |
| gpio6 = &gpio7; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| i2c3 = &i2c4; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc3; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| serial5 = &uart6; |
| serial6 = &uart7; |
| spi0 = &ecspi1; |
| spi1 = &ecspi2; |
| spi2 = &ecspi3; |
| spi3 = &ecspi4; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0>; |
| clock-frequency = <792000000>; |
| clock-latency = <61036>; /* two CLK32 periods */ |
| clocks = <&clks IMX7D_CLK_ARM>; |
| }; |
| }; |
| |
| ckil: clock-cki { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "ckil"; |
| }; |
| |
| osc: clock-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc"; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| funnel@30041000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x30041000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| ca_funnel_ports: ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* funnel input ports */ |
| port@0 { |
| reg = <0>; |
| ca_funnel_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&etm0_out_port>; |
| }; |
| }; |
| |
| /* funnel output port */ |
| port@2 { |
| reg = <0>; |
| ca_funnel_out_port0: endpoint { |
| remote-endpoint = <&hugo_funnel_in_port0>; |
| }; |
| }; |
| |
| /* the other input ports are not connect to anything */ |
| }; |
| }; |
| |
| etm@3007c000 { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x3007c000 0x1000>; |
| cpu = <&cpu0>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| port { |
| etm0_out_port: endpoint { |
| remote-endpoint = <&ca_funnel_in_port0>; |
| }; |
| }; |
| }; |
| |
| funnel@30083000 { |
| compatible = "arm,coresight-funnel", "arm,primecell"; |
| reg = <0x30083000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* funnel input ports */ |
| port@0 { |
| reg = <0>; |
| hugo_funnel_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&ca_funnel_out_port0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| hugo_funnel_in_port1: endpoint { |
| slave-mode; /* M4 input */ |
| }; |
| }; |
| |
| port@2 { |
| reg = <0>; |
| hugo_funnel_out_port0: endpoint { |
| remote-endpoint = <&etf_in_port>; |
| }; |
| }; |
| |
| /* the other input ports are not connect to anything */ |
| }; |
| }; |
| |
| etf@30084000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x30084000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| etf_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&hugo_funnel_out_port0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <0>; |
| etf_out_port: endpoint { |
| remote-endpoint = <&replicator_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etr@30086000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x30086000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| port { |
| etr_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| |
| tpiu@30087000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0x30087000 0x1000>; |
| clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| clock-names = "apb_pclk"; |
| |
| port { |
| tpiu_in_port: endpoint { |
| slave-mode; |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| |
| replicator { |
| /* |
| * non-configurable replicators don't show up on the |
| * AMBA bus. As such no need to add "arm,primecell" |
| */ |
| compatible = "arm,coresight-replicator"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator_out_port0: endpoint { |
| remote-endpoint = <&tpiu_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator_out_port1: endpoint { |
| remote-endpoint = <&etr_in_port>; |
| }; |
| }; |
| |
| /* replicator input port */ |
| port@2 { |
| reg = <0>; |
| replicator_in_port0: endpoint { |
| slave-mode; |
| remote-endpoint = <&etf_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| intc: interrupt-controller@31001000 { |
| compatible = "arm,cortex-a7-gic"; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x31001000 0x1000>, |
| <0x31002000 0x2000>, |
| <0x31004000 0x2000>, |
| <0x31006000 0x2000>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| aips1: aips-bus@30000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30000000 0x400000>; |
| ranges; |
| |
| gpio1: gpio@30200000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30200000 0x10000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ |
| <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>; |
| }; |
| |
| gpio2: gpio@30210000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30210000 0x10000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 13 32>; |
| }; |
| |
| gpio3: gpio@30220000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30220000 0x10000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 45 29>; |
| }; |
| |
| gpio4: gpio@30230000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30230000 0x10000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 74 24>; |
| }; |
| |
| gpio5: gpio@30240000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30240000 0x10000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 98 18>; |
| }; |
| |
| gpio6: gpio@30250000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30250000 0x10000>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 116 23>; |
| }; |
| |
| gpio7: gpio@30260000 { |
| compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; |
| reg = <0x30260000 0x10000>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 139 16>; |
| }; |
| |
| wdog1: wdog@30280000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x30280000 0x10000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; |
| }; |
| |
| wdog2: wdog@30290000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x30290000 0x10000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| wdog3: wdog@302a0000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x302a0000 0x10000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| wdog4: wdog@302b0000 { |
| compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; |
| reg = <0x302b0000 0x10000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| iomuxc_lpsr: iomuxc-lpsr@302c0000 { |
| compatible = "fsl,imx7d-iomuxc-lpsr"; |
| reg = <0x302c0000 0x10000>; |
| fsl,input-sel = <&iomuxc>; |
| }; |
| |
| gpt1: gpt@302d0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; |
| reg = <0x302d0000 0x10000>; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| gpt2: gpt@302e0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; |
| reg = <0x302e0000 0x10000>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| gpt3: gpt@302f0000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; |
| reg = <0x302f0000 0x10000>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| gpt4: gpt@30300000 { |
| compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; |
| reg = <0x30300000 0x10000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_GPT4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@30330000 { |
| compatible = "fsl,imx7d-iomuxc"; |
| reg = <0x30330000 0x10000>; |
| }; |
| |
| gpr: iomuxc-gpr@30340000 { |
| compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; |
| reg = <0x30340000 0x10000>; |
| }; |
| |
| ocotp: ocotp-ctrl@30350000 { |
| compatible = "syscon"; |
| reg = <0x30350000 0x10000>; |
| clocks = <&clks IMX7D_CLK_DUMMY>; |
| status = "disabled"; |
| }; |
| |
| anatop: anatop@30360000 { |
| compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", |
| "syscon", "simple-bus"; |
| reg = <0x30360000 0x10000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| |
| reg_1p0d: regulator-vdd1p0d { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd1p0d"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1200000>; |
| anatop-reg-offset = <0x210>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <8>; |
| anatop-min-voltage = <800000>; |
| anatop-max-voltage = <1200000>; |
| anatop-enable-bit = <31>; |
| }; |
| }; |
| |
| snvs: snvs@30370000 { |
| compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; |
| reg = <0x30370000 0x10000>; |
| |
| snvs_rtc: snvs-rtc-lp { |
| compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| regmap = <&snvs>; |
| offset = <0x34>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| snvs_poweroff: snvs-poweroff { |
| compatible = "syscon-poweroff"; |
| regmap = <&snvs>; |
| offset = <0x38>; |
| mask = <0x60>; |
| }; |
| |
| snvs_pwrkey: snvs-powerkey { |
| compatible = "fsl,sec-v4.0-pwrkey"; |
| regmap = <&snvs>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| linux,keycode = <KEY_POWER>; |
| wakeup-source; |
| }; |
| }; |
| |
| clks: ccm@30380000 { |
| compatible = "fsl,imx7d-ccm"; |
| reg = <0x30380000 0x10000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <1>; |
| clocks = <&ckil>, <&osc>; |
| clock-names = "ckil", "osc"; |
| }; |
| |
| src: src@30390000 { |
| compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; |
| reg = <0x30390000 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| aips2: aips-bus@30400000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30400000 0x400000>; |
| ranges; |
| |
| adc1: adc@30610000 { |
| compatible = "fsl,imx7d-adc"; |
| reg = <0x30610000 0x10000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ADC_ROOT_CLK>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| adc2: adc@30620000 { |
| compatible = "fsl,imx7d-adc"; |
| reg = <0x30620000 0x10000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ADC_ROOT_CLK>; |
| clock-names = "adc"; |
| status = "disabled"; |
| }; |
| |
| ecspi4: ecspi@30630000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30630000 0x10000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, |
| <&clks IMX7D_ECSPI4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@30660000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30660000 0x10000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM1_ROOT_CLK>, |
| <&clks IMX7D_PWM1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@30670000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30670000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM2_ROOT_CLK>, |
| <&clks IMX7D_PWM2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@30680000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30680000 0x10000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM3_ROOT_CLK>, |
| <&clks IMX7D_PWM3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@30690000 { |
| compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; |
| reg = <0x30690000 0x10000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_PWM4_ROOT_CLK>, |
| <&clks IMX7D_PWM4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| lcdif: lcdif@30730000 { |
| compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; |
| reg = <0x30730000 0x10000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, |
| <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; |
| clock-names = "pix", "axi"; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips3: aips-bus@30800000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x30800000 0x400000>; |
| ranges; |
| |
| ecspi1: ecspi@30820000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30820000 0x10000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, |
| <&clks IMX7D_ECSPI1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi2: ecspi@30830000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30830000 0x10000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, |
| <&clks IMX7D_ECSPI2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi3: ecspi@30840000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x30840000 0x10000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, |
| <&clks IMX7D_ECSPI3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@30860000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30860000 0x10000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART1_ROOT_CLK>, |
| <&clks IMX7D_UART1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@30890000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30890000 0x10000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART2_ROOT_CLK>, |
| <&clks IMX7D_UART2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@30880000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30880000 0x10000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART3_ROOT_CLK>, |
| <&clks IMX7D_UART3_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| sai1: sai@308a0000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; |
| reg = <0x308a0000 0x10000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI1_IPG_CLK>, |
| <&clks IMX7D_SAI1_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 8 24 0>, <&sdma 9 24 0>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@308b0000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; |
| reg = <0x308b0000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI2_IPG_CLK>, |
| <&clks IMX7D_SAI2_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 10 24 0>, <&sdma 11 24 0>; |
| status = "disabled"; |
| }; |
| |
| sai3: sai@308c0000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai"; |
| reg = <0x308c0000 0x10000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SAI3_IPG_CLK>, |
| <&clks IMX7D_SAI3_ROOT_CLK>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "rx", "tx"; |
| dmas = <&sdma 12 24 0>, <&sdma 13 24 0>; |
| status = "disabled"; |
| }; |
| |
| flexcan1: can@30a00000 { |
| compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; |
| reg = <0x30a00000 0x10000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CAN1_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| flexcan2: can@30a10000 { |
| compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; |
| reg = <0x30a10000 0x10000>; |
| interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CAN2_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@30a20000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a20000 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C1_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@30a30000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a30000 0x10000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C2_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@30a40000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a40000 0x10000>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C3_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@30a50000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; |
| reg = <0x30a50000 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_I2C4_ROOT_CLK>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@30a60000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30a60000 0x10000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART4_ROOT_CLK>, |
| <&clks IMX7D_UART4_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@30a70000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30a70000 0x10000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART5_ROOT_CLK>, |
| <&clks IMX7D_UART5_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@30a80000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30a80000 0x10000>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART6_ROOT_CLK>, |
| <&clks IMX7D_UART6_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@30a90000 { |
| compatible = "fsl,imx7d-uart", |
| "fsl,imx6q-uart"; |
| reg = <0x30a90000 0x10000>; |
| interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_UART7_ROOT_CLK>, |
| <&clks IMX7D_UART7_ROOT_CLK>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| usbotg1: usb@30b10000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b10000 0x200>; |
| interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphynop1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| phy-clkgate-delay-us = <400>; |
| status = "disabled"; |
| }; |
| |
| usbh: usb@30b30000 { |
| compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| reg = <0x30b30000 0x200>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| fsl,usbphy = <&usbphynop3>; |
| fsl,usbmisc = <&usbmisc3 0>; |
| phy_type = "hsic"; |
| dr_mode = "host"; |
| phy-clkgate-delay-us = <400>; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usbmisc@30b10200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b10200 0x200>; |
| }; |
| |
| usbmisc3: usbmisc@30b30200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x30b30200 0x200>; |
| }; |
| |
| usbphynop1: usbphynop1 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_PHY1_CLK>; |
| clock-names = "main_clk"; |
| }; |
| |
| usbphynop3: usbphynop3 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; |
| clock-names = "main_clk"; |
| }; |
| |
| usdhc1: usdhc@30b40000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; |
| reg = <0x30b40000 0x10000>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_USDHC1_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: usdhc@30b50000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; |
| reg = <0x30b50000 0x10000>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_USDHC2_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: usdhc@30b60000 { |
| compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; |
| reg = <0x30b60000 0x10000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_CLK_DUMMY>, |
| <&clks IMX7D_USDHC3_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sdma: sdma@30bd0000 { |
| compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma"; |
| reg = <0x30bd0000 0x10000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_SDMA_CORE_CLK>, |
| <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; |
| }; |
| |
| fec1: ethernet@30be0000 { |
| compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; |
| reg = <0x30be0000 0x10000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>, |
| <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, |
| <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; |
| clock-names = "ipg", "ahb", "ptp", |
| "enet_clk_ref", "enet_out"; |
| fsl,num-tx-queues=<3>; |
| fsl,num-rx-queues=<3>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
