| /* |
| * Device Tree file for Buffalo Linkstation LS-WTGL |
| * |
| * Copyright (C) 2015, 2016 |
| * Roger Shimizu <rogershimizu@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| |
| #include "orion5x-linkstation.dtsi" |
| #include "mvebu-linkstation-gpio-simple.dtsi" |
| #include "mvebu-linkstation-fan.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Buffalo Linkstation LS-WTGL"; |
| compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x"; |
| |
| memory { /* 64 MB */ |
| device_type = "memory"; |
| reg = <0x00000000 0x4000000>; |
| }; |
| |
| gpio_keys { |
| power-on-switch { |
| gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
| }; |
| |
| power-auto-switch { |
| gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio_leds { |
| blue-power-led { |
| gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
| }; |
| |
| red-alarm-led { |
| gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
| }; |
| |
| amber-info-led { |
| gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio_fan { |
| gpios = <&gpio0 14 GPIO_ACTIVE_LOW |
| &gpio0 17 GPIO_ACTIVE_LOW>; |
| |
| alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &pinctrl { |
| pmx_led_power: pmx-leds { |
| marvell,pins = "mpp0"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_power_hdd: pmx-power-hdd { |
| marvell,pins = "mpp1"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_alarm: pmx-leds { |
| marvell,pins = "mpp2"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_info: pmx-leds { |
| marvell,pins = "mpp3"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fan_lock: pmx-fan-lock { |
| marvell,pins = "mpp6"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_power_switch: pmx-power-switch { |
| marvell,pins = "mpp8", "mpp10"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_power_usb: pmx-power-usb { |
| marvell,pins = "mpp9"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fan_high: pmx-fan-high { |
| marvell,pins = "mpp14"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_fan_low: pmx-fan-low { |
| marvell,pins = "mpp17"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| &hdd_power { |
| gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &usb_power { |
| gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &sata { |
| nr-ports = <2>; |
| }; |