| /dts-v1/; |
| |
| /include/ "skeleton.dtsi" |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8660.h> |
| #include <dt-bindings/soc/qcom,gsbi.h> |
| |
| / { |
| model = "Qualcomm MSM8660"; |
| compatible = "qcom,msm8660"; |
| interrupt-parent = <&intc>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "qcom,scorpion"; |
| enable-method = "qcom,gcc-msm8660"; |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@1 { |
| compatible = "qcom,scorpion"; |
| enable-method = "qcom,gcc-msm8660"; |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| }; |
| }; |
| |
| cpu-pmu { |
| compatible = "qcom,scorpion-mp-pmu"; |
| interrupts = <1 9 0x304>; |
| }; |
| |
| clocks { |
| cxo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| pxo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <27000000>; |
| }; |
| |
| sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@2080000 { |
| compatible = "qcom,msm-8660-qgic"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = < 0x02080000 0x1000 >, |
| < 0x02081000 0x1000 >; |
| }; |
| |
| timer@2000000 { |
| compatible = "qcom,scss-timer", "qcom,msm-timer"; |
| interrupts = <1 0 0x301>, |
| <1 1 0x301>, |
| <1 2 0x301>; |
| reg = <0x02000000 0x100>; |
| clock-frequency = <27000000>, |
| <32768>; |
| cpu-offset = <0x40000>; |
| }; |
| |
| tlmm: pinctrl@800000 { |
| compatible = "qcom,msm8660-pinctrl"; |
| reg = <0x800000 0x4000>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <0 16 0x4>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| }; |
| |
| gcc: clock-controller@900000 { |
| compatible = "qcom,gcc-msm8660"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| reg = <0x900000 0x4000>; |
| }; |
| |
| gsbi12: gsbi@19c00000 { |
| compatible = "qcom,gsbi-v1.0.0"; |
| cell-index = <12>; |
| reg = <0x19c00000 0x100>; |
| clocks = <&gcc GSBI12_H_CLK>; |
| clock-names = "iface"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| syscon-tcsr = <&tcsr>; |
| |
| gsbi12_serial: serial@19c40000 { |
| compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; |
| reg = <0x19c40000 0x1000>, |
| <0x19c00000 0x1000>; |
| interrupts = <0 195 IRQ_TYPE_NONE>; |
| clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| gsbi12_i2c: i2c@19c80000 { |
| compatible = "qcom,i2c-qup-v1.1.1"; |
| reg = <0x19c80000 0x1000>; |
| interrupts = <0 196 IRQ_TYPE_NONE>; |
| clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; |
| clock-names = "core", "iface"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qcom,ssbi@500000 { |
| compatible = "qcom,ssbi"; |
| reg = <0x500000 0x1000>; |
| qcom,controller-type = "pmic-arbiter"; |
| |
| pmicintc: pmic@0 { |
| compatible = "qcom,pm8058"; |
| interrupt-parent = <&tlmm>; |
| interrupts = <88 8>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pm8058_gpio: gpio@150 { |
| compatible = "qcom,pm8058-gpio", |
| "qcom,ssbi-gpio"; |
| reg = <0x150>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <192 IRQ_TYPE_NONE>, |
| <193 IRQ_TYPE_NONE>, |
| <194 IRQ_TYPE_NONE>, |
| <195 IRQ_TYPE_NONE>, |
| <196 IRQ_TYPE_NONE>, |
| <197 IRQ_TYPE_NONE>, |
| <198 IRQ_TYPE_NONE>, |
| <199 IRQ_TYPE_NONE>, |
| <200 IRQ_TYPE_NONE>, |
| <201 IRQ_TYPE_NONE>, |
| <202 IRQ_TYPE_NONE>, |
| <203 IRQ_TYPE_NONE>, |
| <204 IRQ_TYPE_NONE>, |
| <205 IRQ_TYPE_NONE>, |
| <206 IRQ_TYPE_NONE>, |
| <207 IRQ_TYPE_NONE>, |
| <208 IRQ_TYPE_NONE>, |
| <209 IRQ_TYPE_NONE>, |
| <210 IRQ_TYPE_NONE>, |
| <211 IRQ_TYPE_NONE>, |
| <212 IRQ_TYPE_NONE>, |
| <213 IRQ_TYPE_NONE>, |
| <214 IRQ_TYPE_NONE>, |
| <215 IRQ_TYPE_NONE>, |
| <216 IRQ_TYPE_NONE>, |
| <217 IRQ_TYPE_NONE>, |
| <218 IRQ_TYPE_NONE>, |
| <219 IRQ_TYPE_NONE>, |
| <220 IRQ_TYPE_NONE>, |
| <221 IRQ_TYPE_NONE>, |
| <222 IRQ_TYPE_NONE>, |
| <223 IRQ_TYPE_NONE>, |
| <224 IRQ_TYPE_NONE>, |
| <225 IRQ_TYPE_NONE>, |
| <226 IRQ_TYPE_NONE>, |
| <227 IRQ_TYPE_NONE>, |
| <228 IRQ_TYPE_NONE>, |
| <229 IRQ_TYPE_NONE>, |
| <230 IRQ_TYPE_NONE>, |
| <231 IRQ_TYPE_NONE>, |
| <232 IRQ_TYPE_NONE>, |
| <233 IRQ_TYPE_NONE>, |
| <234 IRQ_TYPE_NONE>, |
| <235 IRQ_TYPE_NONE>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| }; |
| |
| pm8058_mpps: mpps@50 { |
| compatible = "qcom,pm8058-mpp", |
| "qcom,ssbi-mpp"; |
| reg = <0x50>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = |
| <128 IRQ_TYPE_NONE>, |
| <129 IRQ_TYPE_NONE>, |
| <130 IRQ_TYPE_NONE>, |
| <131 IRQ_TYPE_NONE>, |
| <132 IRQ_TYPE_NONE>, |
| <133 IRQ_TYPE_NONE>, |
| <134 IRQ_TYPE_NONE>, |
| <135 IRQ_TYPE_NONE>, |
| <136 IRQ_TYPE_NONE>, |
| <137 IRQ_TYPE_NONE>, |
| <138 IRQ_TYPE_NONE>, |
| <139 IRQ_TYPE_NONE>; |
| }; |
| |
| pwrkey@1c { |
| compatible = "qcom,pm8058-pwrkey"; |
| reg = <0x1c>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <50 1>, <51 1>; |
| debounce = <15625>; |
| pull-up; |
| }; |
| |
| keypad@148 { |
| compatible = "qcom,pm8058-keypad"; |
| reg = <0x148>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <74 1>, <75 1>; |
| debounce = <15>; |
| scan-delay = <32>; |
| row-hold = <91500>; |
| }; |
| |
| rtc@1e8 { |
| compatible = "qcom,pm8058-rtc"; |
| reg = <0x1e8>; |
| interrupt-parent = <&pmicintc>; |
| interrupts = <39 1>; |
| allow-set-time; |
| }; |
| |
| vibrator@4a { |
| compatible = "qcom,pm8058-vib"; |
| reg = <0x4a>; |
| }; |
| }; |
| }; |
| |
| l2cc: clock-controller@2082000 { |
| compatible = "syscon"; |
| reg = <0x02082000 0x1000>; |
| }; |
| |
| rpm: rpm@104000 { |
| compatible = "qcom,rpm-msm8660"; |
| reg = <0x00104000 0x1000>; |
| qcom,ipc = <&l2cc 0x8 2>; |
| |
| interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ack", "err", "wakeup"; |
| clocks = <&gcc RPM_MSG_RAM_H_CLK>; |
| clock-names = "ram"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc"; |
| #clock-cells = <1>; |
| }; |
| |
| pm8901-regulators { |
| compatible = "qcom,rpm-pm8901-regulators"; |
| |
| pm8901_l0: l0 {}; |
| pm8901_l1: l1 {}; |
| pm8901_l2: l2 {}; |
| pm8901_l3: l3 {}; |
| pm8901_l4: l4 {}; |
| pm8901_l5: l5 {}; |
| pm8901_l6: l6 {}; |
| |
| /* S0 and S1 Handled as SAW regulators by SPM */ |
| pm8901_s2: s2 {}; |
| pm8901_s3: s3 {}; |
| pm8901_s4: s4 {}; |
| |
| pm8901_lvs0: lvs0 {}; |
| pm8901_lvs1: lvs1 {}; |
| pm8901_lvs2: lvs2 {}; |
| pm8901_lvs3: lvs3 {}; |
| |
| pm8901_mvs: mvs {}; |
| }; |
| |
| pm8058-regulators { |
| compatible = "qcom,rpm-pm8058-regulators"; |
| |
| pm8058_l0: l0 {}; |
| pm8058_l1: l1 {}; |
| pm8058_l2: l2 {}; |
| pm8058_l3: l3 {}; |
| pm8058_l4: l4 {}; |
| pm8058_l5: l5 {}; |
| pm8058_l6: l6 {}; |
| pm8058_l7: l7 {}; |
| pm8058_l8: l8 {}; |
| pm8058_l9: l9 {}; |
| pm8058_l10: l10 {}; |
| pm8058_l11: l11 {}; |
| pm8058_l12: l12 {}; |
| pm8058_l13: l13 {}; |
| pm8058_l14: l14 {}; |
| pm8058_l15: l15 {}; |
| pm8058_l16: l16 {}; |
| pm8058_l17: l17 {}; |
| pm8058_l18: l18 {}; |
| pm8058_l19: l19 {}; |
| pm8058_l20: l20 {}; |
| pm8058_l21: l21 {}; |
| pm8058_l22: l22 {}; |
| pm8058_l23: l23 {}; |
| pm8058_l24: l24 {}; |
| pm8058_l25: l25 {}; |
| |
| pm8058_s0: s0 {}; |
| pm8058_s1: s1 {}; |
| pm8058_s2: s2 {}; |
| pm8058_s3: s3 {}; |
| pm8058_s4: s4 {}; |
| |
| pm8058_lvs0: lvs0 {}; |
| pm8058_lvs1: lvs1 {}; |
| |
| pm8058_ncp: ncp {}; |
| }; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| sdcc1: sdcc@12400000 { |
| status = "disabled"; |
| compatible = "arm,pl18x", "arm,primecell"; |
| arm,primecell-periphid = <0x00051180>; |
| reg = <0x12400000 0x8000>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "cmd_irq"; |
| clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; |
| clock-names = "mclk", "apb_pclk"; |
| bus-width = <8>; |
| max-frequency = <48000000>; |
| non-removable; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| }; |
| |
| sdcc3: sdcc@12180000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| arm,primecell-periphid = <0x00051180>; |
| status = "disabled"; |
| reg = <0x12180000 0x8000>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "cmd_irq"; |
| clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; |
| clock-names = "mclk", "apb_pclk"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| max-frequency = <48000000>; |
| no-1-8-v; |
| }; |
| |
| sdcc5: sdcc@12200000 { |
| compatible = "arm,pl18x", "arm,primecell"; |
| arm,primecell-periphid = <0x00051180>; |
| status = "disabled"; |
| reg = <0x12200000 0x8000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "cmd_irq"; |
| clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; |
| clock-names = "mclk", "apb_pclk"; |
| bus-width = <4>; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| max-frequency = <48000000>; |
| }; |
| }; |
| |
| tcsr: syscon@1a400000 { |
| compatible = "qcom,tcsr-msm8660", "syscon"; |
| reg = <0x1a400000 0x100>; |
| }; |
| }; |
| |
| }; |