| /* |
| * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "armv7-m.dtsi" |
| #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> |
| |
| / { |
| clocks { |
| clk_hse: clk-hse { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| soc { |
| dma-ranges = <0xc0000000 0x0 0x10000000>; |
| |
| timer2: timer@40000000 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40000000 0x400>; |
| interrupts = <28>; |
| clocks = <&rcc 0 128>; |
| status = "disabled"; |
| }; |
| |
| timer3: timer@40000400 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40000400 0x400>; |
| interrupts = <29>; |
| clocks = <&rcc 0 129>; |
| status = "disabled"; |
| }; |
| |
| timer4: timer@40000800 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40000800 0x400>; |
| interrupts = <30>; |
| clocks = <&rcc 0 130>; |
| status = "disabled"; |
| }; |
| |
| timer5: timer@40000c00 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40000c00 0x400>; |
| interrupts = <50>; |
| clocks = <&rcc 0 131>; |
| }; |
| |
| timer6: timer@40001000 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40001000 0x400>; |
| interrupts = <54>; |
| clocks = <&rcc 0 132>; |
| status = "disabled"; |
| }; |
| |
| timer7: timer@40001400 { |
| compatible = "st,stm32-timer"; |
| reg = <0x40001400 0x400>; |
| interrupts = <55>; |
| clocks = <&rcc 0 133>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@40004400 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004400 0x400>; |
| interrupts = <38>; |
| clocks = <&rcc 0 145>; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004800 0x400>; |
| interrupts = <39>; |
| clocks = <&rcc 0 146>; |
| status = "disabled"; |
| }; |
| |
| usart4: serial@40004c00 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004c00 0x400>; |
| interrupts = <52>; |
| clocks = <&rcc 0 147>; |
| status = "disabled"; |
| }; |
| |
| usart5: serial@40005000 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40005000 0x400>; |
| interrupts = <53>; |
| clocks = <&rcc 0 148>; |
| status = "disabled"; |
| }; |
| |
| usart7: serial@40007800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40007800 0x400>; |
| interrupts = <82>; |
| clocks = <&rcc 0 158>; |
| status = "disabled"; |
| }; |
| |
| usart8: serial@40007c00 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40007c00 0x400>; |
| interrupts = <83>; |
| clocks = <&rcc 0 159>; |
| status = "disabled"; |
| }; |
| |
| usart1: serial@40011000 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40011000 0x400>; |
| interrupts = <37>; |
| clocks = <&rcc 0 164>; |
| status = "disabled"; |
| }; |
| |
| usart6: serial@40011400 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40011400 0x400>; |
| interrupts = <71>; |
| clocks = <&rcc 0 165>; |
| status = "disabled"; |
| }; |
| |
| syscfg: system-config@40013800 { |
| compatible = "syscon"; |
| reg = <0x40013800 0x400>; |
| }; |
| |
| exti: interrupt-controller@40013c00 { |
| compatible = "st,stm32-exti"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x40013C00 0x400>; |
| interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; |
| }; |
| |
| pin-controller { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "st,stm32f429-pinctrl"; |
| ranges = <0 0x40020000 0x3000>; |
| pins-are-numbered; |
| |
| gpioa: gpio@40020000 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x0 0x400>; |
| clocks = <&rcc 0 0>; |
| st,bank-name = "GPIOA"; |
| }; |
| |
| gpiob: gpio@40020400 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x400 0x400>; |
| clocks = <&rcc 0 1>; |
| st,bank-name = "GPIOB"; |
| }; |
| |
| gpioc: gpio@40020800 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x800 0x400>; |
| clocks = <&rcc 0 2>; |
| st,bank-name = "GPIOC"; |
| }; |
| |
| gpiod: gpio@40020c00 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0xc00 0x400>; |
| clocks = <&rcc 0 3>; |
| st,bank-name = "GPIOD"; |
| }; |
| |
| gpioe: gpio@40021000 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x1000 0x400>; |
| clocks = <&rcc 0 4>; |
| st,bank-name = "GPIOE"; |
| }; |
| |
| gpiof: gpio@40021400 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x1400 0x400>; |
| clocks = <&rcc 0 5>; |
| st,bank-name = "GPIOF"; |
| }; |
| |
| gpiog: gpio@40021800 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x1800 0x400>; |
| clocks = <&rcc 0 6>; |
| st,bank-name = "GPIOG"; |
| }; |
| |
| gpioh: gpio@40021c00 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x1c00 0x400>; |
| clocks = <&rcc 0 7>; |
| st,bank-name = "GPIOH"; |
| }; |
| |
| gpioi: gpio@40022000 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x2000 0x400>; |
| clocks = <&rcc 0 8>; |
| st,bank-name = "GPIOI"; |
| }; |
| |
| gpioj: gpio@40022400 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x2400 0x400>; |
| clocks = <&rcc 0 9>; |
| st,bank-name = "GPIOJ"; |
| }; |
| |
| gpiok: gpio@40022800 { |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x2800 0x400>; |
| clocks = <&rcc 0 10>; |
| st,bank-name = "GPIOK"; |
| }; |
| |
| usart1_pins_a: usart1@0 { |
| pins1 { |
| pinmux = <STM32F429_PA9_FUNC_USART1_TX>; |
| bias-disable; |
| drive-push-pull; |
| slew-rate = <0>; |
| }; |
| pins2 { |
| pinmux = <STM32F429_PA10_FUNC_USART1_RX>; |
| bias-disable; |
| }; |
| }; |
| |
| usbotg_hs_pins_a: usbotg_hs@0 { |
| pins { |
| pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>, |
| <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>, |
| <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>, |
| <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>, |
| <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>, |
| <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>, |
| <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>, |
| <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>, |
| <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>, |
| <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>, |
| <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>, |
| <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>; |
| bias-disable; |
| drive-push-pull; |
| slew-rate = <2>; |
| }; |
| }; |
| |
| ethernet0_mii: mii@0 { |
| pins { |
| pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, |
| <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, |
| <STM32F429_PC2_FUNC_ETH_MII_TXD2>, |
| <STM32F429_PB8_FUNC_ETH_MII_TXD3>, |
| <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>, |
| <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, |
| <STM32F429_PA2_FUNC_ETH_MDIO>, |
| <STM32F429_PC1_FUNC_ETH_MDC>, |
| <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, |
| <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, |
| <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, |
| <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>, |
| <STM32F429_PH6_FUNC_ETH_MII_RXD2>, |
| <STM32F429_PH7_FUNC_ETH_MII_RXD3>; |
| slew-rate = <2>; |
| }; |
| }; |
| }; |
| |
| rcc: rcc@40023810 { |
| #reset-cells = <1>; |
| #clock-cells = <2>; |
| compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; |
| reg = <0x40023800 0x400>; |
| clocks = <&clk_hse>; |
| }; |
| |
| dma1: dma-controller@40026000 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026000 0x400>; |
| interrupts = <11>, |
| <12>, |
| <13>, |
| <14>, |
| <15>, |
| <16>, |
| <17>, |
| <47>; |
| clocks = <&rcc 0 21>; |
| #dma-cells = <4>; |
| }; |
| |
| dma2: dma-controller@40026400 { |
| compatible = "st,stm32-dma"; |
| reg = <0x40026400 0x400>; |
| interrupts = <56>, |
| <57>, |
| <58>, |
| <59>, |
| <60>, |
| <68>, |
| <69>, |
| <70>; |
| clocks = <&rcc 0 22>; |
| #dma-cells = <4>; |
| st,mem2mem; |
| }; |
| |
| ethernet0: dwmac@40028000 { |
| compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; |
| reg = <0x40028000 0x8000>; |
| reg-names = "stmmaceth"; |
| interrupts = <61>, <62>; |
| interrupt-names = "macirq", "eth_wake_irq"; |
| clock-names = "stmmaceth", "tx-clk", "rx-clk"; |
| clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; |
| st,syscon = <&syscfg 0x4>; |
| snps,pbl = <8>; |
| snps,mixed-burst; |
| dma-ranges; |
| status = "disabled"; |
| }; |
| |
| usbotg_hs: usb@40040000 { |
| compatible = "snps,dwc2"; |
| dma-ranges; |
| reg = <0x40040000 0x40000>; |
| interrupts = <77>; |
| clocks = <&rcc 0 29>; |
| clock-names = "otg"; |
| status = "disabled"; |
| }; |
| |
| rng: rng@50060800 { |
| compatible = "st,stm32-rng"; |
| reg = <0x50060800 0x400>; |
| interrupts = <80>; |
| clocks = <&rcc 0 38>; |
| }; |
| }; |
| }; |
| |
| &systick { |
| clocks = <&rcc 1 0>; |
| status = "okay"; |
| }; |
