| /* |
| * Copyright 2016 Mylène Josserand |
| * |
| * Mylène Josserand <mylene.josserand@free-electrons.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/clock/sun4i-a10-pll2.h> |
| #include <dt-bindings/dma/sun4i-a10.h> |
| #include <dt-bindings/pinctrl/sun4i-a10.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a8"; |
| reg = <0x0>; |
| clocks = <&cpu>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* |
| * This is a dummy clock, to be used as placeholder on |
| * other mux clocks when a specific parent clock is not |
| * yet implemented. It should be dropped when the driver |
| * is complete. |
| */ |
| dummy: dummy { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc24M: clk@01c20050 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-osc-clk"; |
| reg = <0x01c20050 0x4>; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc3M: osc3M-clk { |
| compatible = "fixed-factor-clock"; |
| #clock-cells = <0>; |
| clock-div = <8>; |
| clock-mult = <1>; |
| clocks = <&osc24M>; |
| clock-output-names = "osc3M"; |
| }; |
| |
| osc32k: clk@0 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "osc32k"; |
| }; |
| |
| pll1: clk@01c20000 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-pll1-clk"; |
| reg = <0x01c20000 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll1"; |
| }; |
| |
| pll2: clk@01c20008 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun5i-a13-pll2-clk"; |
| reg = <0x01c20008 0x8>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll2-1x", "pll2-2x", |
| "pll2-4x", "pll2-8x"; |
| }; |
| |
| pll3: clk@01c20010 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-pll3-clk"; |
| reg = <0x01c20010 0x4>; |
| clocks = <&osc3M>; |
| clock-output-names = "pll3"; |
| }; |
| |
| pll3x2: pll3x2-clk { |
| compatible = "allwinner,sun4i-a10-pll3-2x-clk"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <2>; |
| clocks = <&pll3>; |
| clock-output-names = "pll3-2x"; |
| }; |
| |
| pll4: clk@01c20018 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-pll1-clk"; |
| reg = <0x01c20018 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll4"; |
| }; |
| |
| pll5: clk@01c20020 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-pll5-clk"; |
| reg = <0x01c20020 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll5_ddr", "pll5_other"; |
| }; |
| |
| pll6: clk@01c20028 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-pll6-clk"; |
| reg = <0x01c20028 0x4>; |
| clocks = <&osc24M>; |
| clock-output-names = "pll6_sata", "pll6_other", "pll6"; |
| }; |
| |
| pll7: clk@01c20030 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-pll3-clk"; |
| reg = <0x01c20030 0x4>; |
| clocks = <&osc3M>; |
| clock-output-names = "pll7"; |
| }; |
| |
| pll7x2: pll7x2-clk { |
| compatible = "allwinner,sun4i-a10-pll3-2x-clk"; |
| #clock-cells = <0>; |
| clock-div = <1>; |
| clock-mult = <2>; |
| clocks = <&pll7>; |
| clock-output-names = "pll7-2x"; |
| }; |
| |
| /* dummy is 200M */ |
| cpu: cpu@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-cpu-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; |
| clock-output-names = "cpu"; |
| }; |
| |
| axi: axi@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-axi-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&cpu>; |
| clock-output-names = "axi"; |
| }; |
| |
| ahb: ahb@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun5i-a13-ahb-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&axi>, <&cpu>, <&pll6 1>; |
| clock-output-names = "ahb"; |
| /* |
| * Use PLL6 as parent, instead of CPU/AXI |
| * which has rate changes due to cpufreq |
| */ |
| assigned-clocks = <&ahb>; |
| assigned-clock-parents = <&pll6 1>; |
| }; |
| |
| apb0: apb0@01c20054 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb0-clk"; |
| reg = <0x01c20054 0x4>; |
| clocks = <&ahb>; |
| clock-output-names = "apb0"; |
| }; |
| |
| apb1: clk@01c20058 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-apb1-clk"; |
| reg = <0x01c20058 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&osc32k>; |
| clock-output-names = "apb1"; |
| }; |
| |
| axi_gates: clk@01c2005c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-gates-clk"; |
| reg = <0x01c2005c 0x4>; |
| clocks = <&axi>; |
| clock-indices = <0>; |
| clock-output-names = "axi_dram"; |
| }; |
| |
| ahb_gates: clk@01c20060 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun5i-a13-ahb-gates-clk"; |
| reg = <0x01c20060 0x8>; |
| clocks = <&ahb>; |
| clock-indices = <0>, <1>, |
| <2>, <5>, <6>, |
| <7>, <8>, <9>, |
| <10>, <13>, |
| <14>, <17>, <20>, |
| <21>, <22>, |
| <28>, <32>, <34>, |
| <36>, <40>, <44>, |
| <46>, <51>, |
| <52>; |
| clock-output-names = "ahb_usbotg", "ahb_ehci", |
| "ahb_ohci", "ahb_ss", "ahb_dma", |
| "ahb_bist", "ahb_mmc0", "ahb_mmc1", |
| "ahb_mmc2", "ahb_nand", |
| "ahb_sdram", "ahb_emac", "ahb_spi0", |
| "ahb_spi1", "ahb_spi2", |
| "ahb_hstimer", "ahb_ve", "ahb_tve", |
| "ahb_lcd", "ahb_csi", "ahb_de_be", |
| "ahb_de_fe", "ahb_iep", |
| "ahb_mali400"; |
| }; |
| |
| apb0_gates: clk@01c20068 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-gates-clk"; |
| reg = <0x01c20068 0x4>; |
| clocks = <&apb0>; |
| clock-indices = <0>, <3>, |
| <5>, <6>; |
| clock-output-names = "apb0_codec", "apb0_i2s0", |
| "apb0_pio", "apb0_ir"; |
| }; |
| |
| apb1_gates: clk@01c2006c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-gates-clk"; |
| reg = <0x01c2006c 0x4>; |
| clocks = <&apb1>; |
| clock-indices = <0>, <1>, |
| <2>, <17>, |
| <18>, <19>; |
| clock-output-names = "apb1_i2c0", "apb1_i2c1", |
| "apb1_i2c2", "apb1_uart1", |
| "apb1_uart2", "apb1_uart3"; |
| }; |
| |
| nand_clk: clk@01c20080 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20080 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "nand"; |
| }; |
| |
| ms_clk: clk@01c20084 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20084 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "ms"; |
| }; |
| |
| mmc0_clk: clk@01c20088 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c20088 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "mmc0", |
| "mmc0_output", |
| "mmc0_sample"; |
| }; |
| |
| mmc1_clk: clk@01c2008c { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c2008c 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "mmc1", |
| "mmc1_output", |
| "mmc1_sample"; |
| }; |
| |
| mmc2_clk: clk@01c20090 { |
| #clock-cells = <1>; |
| compatible = "allwinner,sun4i-a10-mmc-clk"; |
| reg = <0x01c20090 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "mmc2", |
| "mmc2_output", |
| "mmc2_sample"; |
| }; |
| |
| ts_clk: clk@01c20098 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c20098 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "ts"; |
| }; |
| |
| ss_clk: clk@01c2009c { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c2009c 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "ss"; |
| }; |
| |
| spi0_clk: clk@01c200a0 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a0 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "spi0"; |
| }; |
| |
| spi1_clk: clk@01c200a4 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a4 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "spi1"; |
| }; |
| |
| spi2_clk: clk@01c200a8 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200a8 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "spi2"; |
| }; |
| |
| ir0_clk: clk@01c200b0 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod0-clk"; |
| reg = <0x01c200b0 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "ir0"; |
| }; |
| |
| i2s0_clk: clk@01c200b8 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod1-clk"; |
| reg = <0x01c200b8 0x4>; |
| clocks = <&pll2 SUN4I_A10_PLL2_8X>, |
| <&pll2 SUN4I_A10_PLL2_4X>, |
| <&pll2 SUN4I_A10_PLL2_2X>, |
| <&pll2 SUN4I_A10_PLL2_1X>; |
| clock-output-names = "i2s0"; |
| }; |
| |
| spdif_clk: clk@01c200c0 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-mod1-clk"; |
| reg = <0x01c200c0 0x4>; |
| clocks = <&pll2 SUN4I_A10_PLL2_8X>, |
| <&pll2 SUN4I_A10_PLL2_4X>, |
| <&pll2 SUN4I_A10_PLL2_2X>, |
| <&pll2 SUN4I_A10_PLL2_1X>; |
| clock-output-names = "spdif"; |
| }; |
| |
| usb_clk: clk@01c200cc { |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| compatible = "allwinner,sun5i-a13-usb-clk"; |
| reg = <0x01c200cc 0x4>; |
| clocks = <&pll6 1>; |
| clock-output-names = "usb_ohci0", "usb_phy"; |
| }; |
| |
| dram_gates: clk@01c20100 { |
| #clock-cells = <1>; |
| compatible = "nextthing,gr8-dram-gates-clk", |
| "allwinner,sun4i-a10-gates-clk"; |
| reg = <0x01c20100 0x4>; |
| clocks = <&pll5 0>; |
| clock-indices = <0>, |
| <1>, |
| <25>, |
| <26>, |
| <29>, |
| <31>; |
| clock-output-names = "dram_ve", |
| "dram_csi", |
| "dram_de_fe", |
| "dram_de_be", |
| "dram_ace", |
| "dram_iep"; |
| }; |
| |
| de_be_clk: clk@01c20104 { |
| #clock-cells = <0>; |
| #reset-cells = <0>; |
| compatible = "allwinner,sun4i-a10-display-clk"; |
| reg = <0x01c20104 0x4>; |
| clocks = <&pll3>, <&pll7>, <&pll5 1>; |
| clock-output-names = "de-be"; |
| }; |
| |
| de_fe_clk: clk@01c2010c { |
| #clock-cells = <0>; |
| #reset-cells = <0>; |
| compatible = "allwinner,sun4i-a10-display-clk"; |
| reg = <0x01c2010c 0x4>; |
| clocks = <&pll3>, <&pll7>, <&pll5 1>; |
| clock-output-names = "de-fe"; |
| }; |
| |
| tcon_ch0_clk: clk@01c20118 { |
| #clock-cells = <0>; |
| #reset-cells = <1>; |
| compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; |
| reg = <0x01c20118 0x4>; |
| clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; |
| clock-output-names = "tcon-ch0-sclk"; |
| }; |
| |
| tcon_ch1_clk: clk@01c2012c { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; |
| reg = <0x01c2012c 0x4>; |
| clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; |
| clock-output-names = "tcon-ch1-sclk"; |
| }; |
| |
| codec_clk: clk@01c20140 { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun4i-a10-codec-clk"; |
| reg = <0x01c20140 0x4>; |
| clocks = <&pll2 SUN4I_A10_PLL2_1X>; |
| clock-output-names = "codec"; |
| }; |
| |
| mbus_clk: clk@01c2015c { |
| #clock-cells = <0>; |
| compatible = "allwinner,sun5i-a13-mbus-clk"; |
| reg = <0x01c2015c 0x4>; |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; |
| clock-output-names = "mbus"; |
| }; |
| }; |
| |
| display-engine { |
| compatible = "allwinner,sun5i-a13-display-engine"; |
| allwinner,pipelines = <&fe0>; |
| }; |
| |
| soc@01c00000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram-controller@01c00000 { |
| compatible = "allwinner,sun4i-a10-sram-controller"; |
| reg = <0x01c00000 0x30>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_a: sram@00000000 { |
| compatible = "mmio-sram"; |
| reg = <0x00000000 0xc000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00000000 0xc000>; |
| }; |
| |
| sram_d: sram@00010000 { |
| compatible = "mmio-sram"; |
| reg = <0x00010000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00010000 0x1000>; |
| |
| otg_sram: sram-section@0000 { |
| compatible = "allwinner,sun4i-a10-sram-d"; |
| reg = <0x0000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| dma: dma-controller@01c02000 { |
| compatible = "allwinner,sun4i-a10-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <27>; |
| clocks = <&ahb_gates 6>; |
| #dma-cells = <2>; |
| }; |
| |
| nfc: nand@01c03000 { |
| compatible = "allwinner,sun4i-a10-nand"; |
| reg = <0x01c03000 0x1000>; |
| interrupts = <37>; |
| clocks = <&ahb_gates 13>, <&nand_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 3>; |
| dma-names = "rxtx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi0: spi@01c05000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c05000 0x1000>; |
| interrupts = <10>; |
| clocks = <&ahb_gates 20>, <&spi0_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 27>, |
| <&dma SUN4I_DMA_DEDICATED 26>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@01c06000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c06000 0x1000>; |
| interrupts = <11>; |
| clocks = <&ahb_gates 21>, <&spi1_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 9>, |
| <&dma SUN4I_DMA_DEDICATED 8>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| tve0: tv-encoder@01c0a000 { |
| compatible = "allwinner,sun4i-a10-tv-encoder"; |
| reg = <0x01c0a000 0x1000>; |
| clocks = <&ahb_gates 34>; |
| resets = <&tcon_ch0_clk 0>; |
| status = "disabled"; |
| |
| port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tve0_in_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_out_tve0>; |
| }; |
| }; |
| }; |
| |
| tcon0: lcd-controller@01c0c000 { |
| compatible = "allwinner,sun5i-a13-tcon"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <44>; |
| resets = <&tcon_ch0_clk 1>; |
| reset-names = "lcd"; |
| clocks = <&ahb_gates 36>, |
| <&tcon_ch0_clk>, |
| <&tcon_ch1_clk>; |
| clock-names = "ahb", |
| "tcon-ch0", |
| "tcon-ch1"; |
| clock-output-names = "tcon-pixel-clock"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon0_in_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_tve0: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tve0_in_tcon0>; |
| }; |
| }; |
| }; |
| }; |
| |
| mmc0: mmc@01c0f000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ahb_gates 8>, |
| <&mmc0_clk 0>, |
| <&mmc0_clk 1>, |
| <&mmc0_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <32>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@01c10000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ahb_gates 9>, |
| <&mmc1_clk 0>, |
| <&mmc1_clk 1>, |
| <&mmc1_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <33>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@01c11000 { |
| compatible = "allwinner,sun5i-a13-mmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ahb_gates 10>, |
| <&mmc2_clk 0>, |
| <&mmc2_clk 1>, |
| <&mmc2_clk 2>; |
| clock-names = "ahb", |
| "mmc", |
| "output", |
| "sample"; |
| interrupts = <34>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| usb_otg: usb@01c13000 { |
| compatible = "allwinner,sun4i-a10-musb"; |
| reg = <0x01c13000 0x0400>; |
| clocks = <&ahb_gates 0>; |
| interrupts = <38>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| allwinner,sram = <&otg_sram 1>; |
| status = "disabled"; |
| |
| dr_mode = "otg"; |
| }; |
| |
| usbphy: phy@01c13400 { |
| #phy-cells = <1>; |
| compatible = "allwinner,sun5i-a13-usb-phy"; |
| reg = <0x01c13400 0x10 0x01c14800 0x4>; |
| reg-names = "phy_ctrl", "pmu1"; |
| clocks = <&usb_clk 8>; |
| clock-names = "usb_phy"; |
| resets = <&usb_clk 0>, <&usb_clk 1>; |
| reset-names = "usb0_reset", "usb1_reset"; |
| status = "disabled"; |
| }; |
| |
| ehci0: usb@01c14000 { |
| compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; |
| reg = <0x01c14000 0x100>; |
| interrupts = <39>; |
| clocks = <&ahb_gates 1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@01c14400 { |
| compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; |
| reg = <0x01c14400 0x100>; |
| interrupts = <40>; |
| clocks = <&usb_clk 6>, <&ahb_gates 2>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@01c17000 { |
| compatible = "allwinner,sun4i-a10-spi"; |
| reg = <0x01c17000 0x1000>; |
| interrupts = <12>; |
| clocks = <&ahb_gates 22>, <&spi2_clk>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma SUN4I_DMA_DEDICATED 29>, |
| <&dma SUN4I_DMA_DEDICATED 28>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| intc: interrupt-controller@01c20400 { |
| compatible = "allwinner,sun4i-a10-ic"; |
| reg = <0x01c20400 0x400>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| pio: pinctrl@01c20800 { |
| compatible = "nextthing,gr8-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <28>; |
| clocks = <&apb0_gates 5>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| #gpio-cells = <3>; |
| |
| i2c0_pins_a: i2c0@0 { |
| allwinner,pins = "PB0", "PB1"; |
| allwinner,function = "i2c0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2c1_pins_a: i2c1@0 { |
| allwinner,pins = "PB15", "PB16"; |
| allwinner,function = "i2c1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2c2_pins_a: i2c2@0 { |
| allwinner,pins = "PB17", "PB18"; |
| allwinner,function = "i2c2"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2s0_data_pins_a: i2s0-data@0 { |
| allwinner,pins = "PB6", "PB7", "PB8", "PB9"; |
| allwinner,function = "i2s0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| i2s0_mclk_pins_a: i2s0-mclk@0 { |
| allwinner,pins = "PB6", "PB7", "PB8", "PB9"; |
| allwinner,function = "i2s0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| ir0_rx_pins_a: ir0@0 { |
| allwinner,pins = "PB4"; |
| allwinner,function = "ir0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| lcd_rgb666_pins: lcd-rgb666@0 { |
| allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", |
| "PD24", "PD25", "PD26", "PD27"; |
| allwinner,function = "lcd0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| mmc0_pins_a: mmc0@0 { |
| allwinner,pins = "PF0", "PF1", "PF2", "PF3", |
| "PF4", "PF5"; |
| allwinner,function = "mmc0"; |
| allwinner,drive = <SUN4I_PINCTRL_30_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| nand_pins_a: nand-base0@0 { |
| allwinner,pins = "PC0", "PC1", "PC2", |
| "PC5", "PC8", "PC9", "PC10", |
| "PC11", "PC12", "PC13", "PC14", |
| "PC15"; |
| allwinner,function = "nand0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| nand_cs0_pins_a: nand-cs@0 { |
| allwinner,pins = "PC4"; |
| allwinner,function = "nand0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| nand_rb0_pins_a: nand-rb@0 { |
| allwinner,pins = "PC6"; |
| allwinner,function = "nand0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| pwm0_pins_a: pwm0@0 { |
| allwinner,pins = "PB2"; |
| allwinner,function = "pwm0"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| spdif_tx_pins_a: spdif@0 { |
| allwinner,pins = "PB10"; |
| allwinner,function = "spdif"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; |
| }; |
| |
| uart1_pins_a: uart1@1 { |
| allwinner,pins = "PG3", "PG4"; |
| allwinner,function = "uart1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| |
| uart1_cts_rts_pins_a: uart1-cts-rts@0 { |
| allwinner,pins = "PG5", "PG6"; |
| allwinner,function = "uart1"; |
| allwinner,drive = <SUN4I_PINCTRL_10_MA>; |
| allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; |
| }; |
| }; |
| |
| pwm: pwm@01c20e00 { |
| compatible = "allwinner,sun5i-a10s-pwm"; |
| reg = <0x01c20e00 0xc>; |
| clocks = <&osc24M>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| timer@01c20c00 { |
| compatible = "allwinner,sun4i-a10-timer"; |
| reg = <0x01c20c00 0x90>; |
| interrupts = <22>; |
| clocks = <&osc24M>; |
| }; |
| |
| wdt: watchdog@01c20c90 { |
| compatible = "allwinner,sun4i-a10-wdt"; |
| reg = <0x01c20c90 0x10>; |
| }; |
| |
| spdif: spdif@01c21000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-spdif"; |
| reg = <0x01c21000 0x400>; |
| interrupts = <13>; |
| clocks = <&apb0_gates 1>, <&spdif_clk>; |
| clock-names = "apb", "spdif"; |
| dmas = <&dma SUN4I_DMA_NORMAL 2>, |
| <&dma SUN4I_DMA_NORMAL 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| ir0: ir@01c21800 { |
| compatible = "allwinner,sun4i-a10-ir"; |
| clocks = <&apb0_gates 6>, <&ir0_clk>; |
| clock-names = "apb", "ir"; |
| interrupts = <5>; |
| reg = <0x01c21800 0x40>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@01c22400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-i2s"; |
| reg = <0x01c22400 0x400>; |
| interrupts = <16>; |
| clocks = <&apb0_gates 3>, <&i2s0_clk>; |
| clock-names = "apb", "mod"; |
| dmas = <&dma SUN4I_DMA_NORMAL 3>, |
| <&dma SUN4I_DMA_NORMAL 3>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@01c22800 { |
| compatible = "allwinner,sun4i-a10-lradc-keys"; |
| reg = <0x01c22800 0x100>; |
| interrupts = <31>; |
| status = "disabled"; |
| }; |
| |
| codec: codec@01c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun4i-a10-codec"; |
| reg = <0x01c22c00 0x40>; |
| interrupts = <30>; |
| clocks = <&apb0_gates 0>, <&codec_clk>; |
| clock-names = "apb", "codec"; |
| dmas = <&dma SUN4I_DMA_NORMAL 19>, |
| <&dma SUN4I_DMA_NORMAL 19>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| rtp: rtp@01c25000 { |
| compatible = "allwinner,sun5i-a13-ts"; |
| reg = <0x01c25000 0x100>; |
| interrupts = <29>; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| uart1: serial@01c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <2>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb1_gates 17>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@01c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <3>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&apb1_gates 18>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@01c2ac00 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <7>; |
| clocks = <&apb1_gates 0>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@01c2b000 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <8>; |
| clocks = <&apb1_gates 1>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@01c2b400 { |
| compatible = "allwinner,sun4i-a10-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <9>; |
| clocks = <&apb1_gates 2>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| timer@01c60000 { |
| compatible = "allwinner,sun5i-a13-hstimer"; |
| reg = <0x01c60000 0x1000>; |
| interrupts = <82>, <83>; |
| clocks = <&ahb_gates 28>; |
| }; |
| |
| fe0: display-frontend@01e00000 { |
| compatible = "allwinner,sun5i-a13-display-frontend"; |
| reg = <0x01e00000 0x20000>; |
| interrupts = <47>; |
| clocks = <&ahb_gates 46>, <&de_fe_clk>, |
| <&dram_gates 25>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&de_fe_clk>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| fe0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| fe0_out_be0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&be0_in_fe0>; |
| }; |
| }; |
| }; |
| }; |
| |
| be0: display-backend@01e60000 { |
| compatible = "allwinner,sun5i-a13-display-backend"; |
| reg = <0x01e60000 0x10000>; |
| clocks = <&ahb_gates 44>, <&de_be_clk>, |
| <&dram_gates 26>; |
| clock-names = "ahb", "mod", |
| "ram"; |
| resets = <&de_be_clk>; |
| status = "disabled"; |
| |
| assigned-clocks = <&de_be_clk>; |
| assigned-clock-rates = <300000000>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| be0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| be0_in_fe0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&fe0_out_be0>; |
| }; |
| }; |
| |
| be0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| be0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_be0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |