| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * Parts of this driver are based on the following: |
| * - Kvaser linux leaf driver (version 4.78) |
| * - CAN driver for esd CAN-USB/2 |
| * - Kvaser linux usbcanII driver (version 5.3) |
| * |
| * Copyright (C) 2002-2006 KVASER AB, Sweden. All rights reserved. |
| * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh |
| * Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be> |
| * Copyright (C) 2015 Valeo S.A. |
| */ |
| |
| #include <linux/spinlock.h> |
| #include <linux/kernel.h> |
| #include <linux/completion.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/usb.h> |
| |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| |
| #define MAX_RX_URBS 4 |
| #define START_TIMEOUT 1000 /* msecs */ |
| #define STOP_TIMEOUT 1000 /* msecs */ |
| #define USB_SEND_TIMEOUT 1000 /* msecs */ |
| #define USB_RECV_TIMEOUT 1000 /* msecs */ |
| #define RX_BUFFER_SIZE 3072 |
| #define CAN_USB_CLOCK 8000000 |
| #define MAX_NET_DEVICES 3 |
| #define MAX_USBCAN_NET_DEVICES 2 |
| |
| /* Kvaser Leaf USB devices */ |
| #define KVASER_VENDOR_ID 0x0bfd |
| #define USB_LEAF_DEVEL_PRODUCT_ID 10 |
| #define USB_LEAF_LITE_PRODUCT_ID 11 |
| #define USB_LEAF_PRO_PRODUCT_ID 12 |
| #define USB_LEAF_SPRO_PRODUCT_ID 14 |
| #define USB_LEAF_PRO_LS_PRODUCT_ID 15 |
| #define USB_LEAF_PRO_SWC_PRODUCT_ID 16 |
| #define USB_LEAF_PRO_LIN_PRODUCT_ID 17 |
| #define USB_LEAF_SPRO_LS_PRODUCT_ID 18 |
| #define USB_LEAF_SPRO_SWC_PRODUCT_ID 19 |
| #define USB_MEMO2_DEVEL_PRODUCT_ID 22 |
| #define USB_MEMO2_HSHS_PRODUCT_ID 23 |
| #define USB_UPRO_HSHS_PRODUCT_ID 24 |
| #define USB_LEAF_LITE_GI_PRODUCT_ID 25 |
| #define USB_LEAF_PRO_OBDII_PRODUCT_ID 26 |
| #define USB_MEMO2_HSLS_PRODUCT_ID 27 |
| #define USB_LEAF_LITE_CH_PRODUCT_ID 28 |
| #define USB_BLACKBIRD_SPRO_PRODUCT_ID 29 |
| #define USB_OEM_MERCURY_PRODUCT_ID 34 |
| #define USB_OEM_LEAF_PRODUCT_ID 35 |
| #define USB_CAN_R_PRODUCT_ID 39 |
| #define USB_LEAF_LITE_V2_PRODUCT_ID 288 |
| #define USB_MINI_PCIE_HS_PRODUCT_ID 289 |
| #define USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID 290 |
| #define USB_USBCAN_LIGHT_2HS_PRODUCT_ID 291 |
| #define USB_MINI_PCIE_2HS_PRODUCT_ID 292 |
| |
| static inline bool kvaser_is_leaf(const struct usb_device_id *id) |
| { |
| return id->idProduct >= USB_LEAF_DEVEL_PRODUCT_ID && |
| id->idProduct <= USB_MINI_PCIE_2HS_PRODUCT_ID; |
| } |
| |
| /* Kvaser USBCan-II devices */ |
| #define USB_USBCAN_REVB_PRODUCT_ID 2 |
| #define USB_VCI2_PRODUCT_ID 3 |
| #define USB_USBCAN2_PRODUCT_ID 4 |
| #define USB_MEMORATOR_PRODUCT_ID 5 |
| |
| static inline bool kvaser_is_usbcan(const struct usb_device_id *id) |
| { |
| return id->idProduct >= USB_USBCAN_REVB_PRODUCT_ID && |
| id->idProduct <= USB_MEMORATOR_PRODUCT_ID; |
| } |
| |
| /* USB devices features */ |
| #define KVASER_HAS_SILENT_MODE BIT(0) |
| #define KVASER_HAS_TXRX_ERRORS BIT(1) |
| |
| /* Message header size */ |
| #define MSG_HEADER_LEN 2 |
| |
| /* Can message flags */ |
| #define MSG_FLAG_ERROR_FRAME BIT(0) |
| #define MSG_FLAG_OVERRUN BIT(1) |
| #define MSG_FLAG_NERR BIT(2) |
| #define MSG_FLAG_WAKEUP BIT(3) |
| #define MSG_FLAG_REMOTE_FRAME BIT(4) |
| #define MSG_FLAG_RESERVED BIT(5) |
| #define MSG_FLAG_TX_ACK BIT(6) |
| #define MSG_FLAG_TX_REQUEST BIT(7) |
| |
| /* Can states (M16C CxSTRH register) */ |
| #define M16C_STATE_BUS_RESET BIT(0) |
| #define M16C_STATE_BUS_ERROR BIT(4) |
| #define M16C_STATE_BUS_PASSIVE BIT(5) |
| #define M16C_STATE_BUS_OFF BIT(6) |
| |
| /* Can msg ids */ |
| #define CMD_RX_STD_MESSAGE 12 |
| #define CMD_TX_STD_MESSAGE 13 |
| #define CMD_RX_EXT_MESSAGE 14 |
| #define CMD_TX_EXT_MESSAGE 15 |
| #define CMD_SET_BUS_PARAMS 16 |
| #define CMD_GET_BUS_PARAMS 17 |
| #define CMD_GET_BUS_PARAMS_REPLY 18 |
| #define CMD_GET_CHIP_STATE 19 |
| #define CMD_CHIP_STATE_EVENT 20 |
| #define CMD_SET_CTRL_MODE 21 |
| #define CMD_GET_CTRL_MODE 22 |
| #define CMD_GET_CTRL_MODE_REPLY 23 |
| #define CMD_RESET_CHIP 24 |
| #define CMD_RESET_CARD 25 |
| #define CMD_START_CHIP 26 |
| #define CMD_START_CHIP_REPLY 27 |
| #define CMD_STOP_CHIP 28 |
| #define CMD_STOP_CHIP_REPLY 29 |
| |
| #define CMD_LEAF_GET_CARD_INFO2 32 |
| #define CMD_USBCAN_RESET_CLOCK 32 |
| #define CMD_USBCAN_CLOCK_OVERFLOW_EVENT 33 |
| |
| #define CMD_GET_CARD_INFO 34 |
| #define CMD_GET_CARD_INFO_REPLY 35 |
| #define CMD_GET_SOFTWARE_INFO 38 |
| #define CMD_GET_SOFTWARE_INFO_REPLY 39 |
| #define CMD_ERROR_EVENT 45 |
| #define CMD_FLUSH_QUEUE 48 |
| #define CMD_RESET_ERROR_COUNTER 49 |
| #define CMD_TX_ACKNOWLEDGE 50 |
| #define CMD_CAN_ERROR_EVENT 51 |
| |
| #define CMD_LEAF_USB_THROTTLE 77 |
| #define CMD_LEAF_LOG_MESSAGE 106 |
| |
| /* error factors */ |
| #define M16C_EF_ACKE BIT(0) |
| #define M16C_EF_CRCE BIT(1) |
| #define M16C_EF_FORME BIT(2) |
| #define M16C_EF_STFE BIT(3) |
| #define M16C_EF_BITE0 BIT(4) |
| #define M16C_EF_BITE1 BIT(5) |
| #define M16C_EF_RCVE BIT(6) |
| #define M16C_EF_TRE BIT(7) |
| |
| /* Only Leaf-based devices can report M16C error factors, |
| * thus define our own error status flags for USBCANII |
| */ |
| #define USBCAN_ERROR_STATE_NONE 0 |
| #define USBCAN_ERROR_STATE_TX_ERROR BIT(0) |
| #define USBCAN_ERROR_STATE_RX_ERROR BIT(1) |
| #define USBCAN_ERROR_STATE_BUSERROR BIT(2) |
| |
| /* bittiming parameters */ |
| #define KVASER_USB_TSEG1_MIN 1 |
| #define KVASER_USB_TSEG1_MAX 16 |
| #define KVASER_USB_TSEG2_MIN 1 |
| #define KVASER_USB_TSEG2_MAX 8 |
| #define KVASER_USB_SJW_MAX 4 |
| #define KVASER_USB_BRP_MIN 1 |
| #define KVASER_USB_BRP_MAX 64 |
| #define KVASER_USB_BRP_INC 1 |
| |
| /* ctrl modes */ |
| #define KVASER_CTRL_MODE_NORMAL 1 |
| #define KVASER_CTRL_MODE_SILENT 2 |
| #define KVASER_CTRL_MODE_SELFRECEPTION 3 |
| #define KVASER_CTRL_MODE_OFF 4 |
| |
| /* Extended CAN identifier flag */ |
| #define KVASER_EXTENDED_FRAME BIT(31) |
| |
| /* Kvaser USB CAN dongles are divided into two major families: |
| * - Leaf: Based on Renesas M32C, running firmware labeled as 'filo' |
| * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios' |
| */ |
| enum kvaser_usb_family { |
| KVASER_LEAF, |
| KVASER_USBCAN, |
| }; |
| |
| struct kvaser_msg_simple { |
| u8 tid; |
| u8 channel; |
| } __packed; |
| |
| struct kvaser_msg_cardinfo { |
| u8 tid; |
| u8 nchannels; |
| union { |
| struct { |
| __le32 serial_number; |
| __le32 padding; |
| } __packed leaf0; |
| struct { |
| __le32 serial_number_low; |
| __le32 serial_number_high; |
| } __packed usbcan0; |
| } __packed; |
| __le32 clock_resolution; |
| __le32 mfgdate; |
| u8 ean[8]; |
| u8 hw_revision; |
| union { |
| struct { |
| u8 usb_hs_mode; |
| } __packed leaf1; |
| struct { |
| u8 padding; |
| } __packed usbcan1; |
| } __packed; |
| __le16 padding; |
| } __packed; |
| |
| struct kvaser_msg_cardinfo2 { |
| u8 tid; |
| u8 reserved; |
| u8 pcb_id[24]; |
| __le32 oem_unlock_code; |
| } __packed; |
| |
| struct leaf_msg_softinfo { |
| u8 tid; |
| u8 padding0; |
| __le32 sw_options; |
| __le32 fw_version; |
| __le16 max_outstanding_tx; |
| __le16 padding1[9]; |
| } __packed; |
| |
| struct usbcan_msg_softinfo { |
| u8 tid; |
| u8 fw_name[5]; |
| __le16 max_outstanding_tx; |
| u8 padding[6]; |
| __le32 fw_version; |
| __le16 checksum; |
| __le16 sw_options; |
| } __packed; |
| |
| struct kvaser_msg_busparams { |
| u8 tid; |
| u8 channel; |
| __le32 bitrate; |
| u8 tseg1; |
| u8 tseg2; |
| u8 sjw; |
| u8 no_samp; |
| } __packed; |
| |
| struct kvaser_msg_tx_can { |
| u8 channel; |
| u8 tid; |
| u8 msg[14]; |
| union { |
| struct { |
| u8 padding; |
| u8 flags; |
| } __packed leaf; |
| struct { |
| u8 flags; |
| u8 padding; |
| } __packed usbcan; |
| } __packed; |
| } __packed; |
| |
| struct kvaser_msg_rx_can_header { |
| u8 channel; |
| u8 flag; |
| } __packed; |
| |
| struct leaf_msg_rx_can { |
| u8 channel; |
| u8 flag; |
| |
| __le16 time[3]; |
| u8 msg[14]; |
| } __packed; |
| |
| struct usbcan_msg_rx_can { |
| u8 channel; |
| u8 flag; |
| |
| u8 msg[14]; |
| __le16 time; |
| } __packed; |
| |
| struct leaf_msg_chip_state_event { |
| u8 tid; |
| u8 channel; |
| |
| __le16 time[3]; |
| u8 tx_errors_count; |
| u8 rx_errors_count; |
| |
| u8 status; |
| u8 padding[3]; |
| } __packed; |
| |
| struct usbcan_msg_chip_state_event { |
| u8 tid; |
| u8 channel; |
| |
| u8 tx_errors_count; |
| u8 rx_errors_count; |
| __le16 time; |
| |
| u8 status; |
| u8 padding[3]; |
| } __packed; |
| |
| struct kvaser_msg_tx_acknowledge_header { |
| u8 channel; |
| u8 tid; |
| } __packed; |
| |
| struct leaf_msg_tx_acknowledge { |
| u8 channel; |
| u8 tid; |
| |
| __le16 time[3]; |
| u8 flags; |
| u8 time_offset; |
| } __packed; |
| |
| struct usbcan_msg_tx_acknowledge { |
| u8 channel; |
| u8 tid; |
| |
| __le16 time; |
| __le16 padding; |
| } __packed; |
| |
| struct leaf_msg_error_event { |
| u8 tid; |
| u8 flags; |
| __le16 time[3]; |
| u8 channel; |
| u8 padding; |
| u8 tx_errors_count; |
| u8 rx_errors_count; |
| u8 status; |
| u8 error_factor; |
| } __packed; |
| |
| struct usbcan_msg_error_event { |
| u8 tid; |
| u8 padding; |
| u8 tx_errors_count_ch0; |
| u8 rx_errors_count_ch0; |
| u8 tx_errors_count_ch1; |
| u8 rx_errors_count_ch1; |
| u8 status_ch0; |
| u8 status_ch1; |
| __le16 time; |
| } __packed; |
| |
| struct kvaser_msg_ctrl_mode { |
| u8 tid; |
| u8 channel; |
| u8 ctrl_mode; |
| u8 padding[3]; |
| } __packed; |
| |
| struct kvaser_msg_flush_queue { |
| u8 tid; |
| u8 channel; |
| u8 flags; |
| u8 padding[3]; |
| } __packed; |
| |
| struct leaf_msg_log_message { |
| u8 channel; |
| u8 flags; |
| __le16 time[3]; |
| u8 dlc; |
| u8 time_offset; |
| __le32 id; |
| u8 data[8]; |
| } __packed; |
| |
| struct kvaser_msg { |
| u8 len; |
| u8 id; |
| union { |
| struct kvaser_msg_simple simple; |
| struct kvaser_msg_cardinfo cardinfo; |
| struct kvaser_msg_cardinfo2 cardinfo2; |
| struct kvaser_msg_busparams busparams; |
| |
| struct kvaser_msg_rx_can_header rx_can_header; |
| struct kvaser_msg_tx_acknowledge_header tx_acknowledge_header; |
| |
| union { |
| struct leaf_msg_softinfo softinfo; |
| struct leaf_msg_rx_can rx_can; |
| struct leaf_msg_chip_state_event chip_state_event; |
| struct leaf_msg_tx_acknowledge tx_acknowledge; |
| struct leaf_msg_error_event error_event; |
| struct leaf_msg_log_message log_message; |
| } __packed leaf; |
| |
| union { |
| struct usbcan_msg_softinfo softinfo; |
| struct usbcan_msg_rx_can rx_can; |
| struct usbcan_msg_chip_state_event chip_state_event; |
| struct usbcan_msg_tx_acknowledge tx_acknowledge; |
| struct usbcan_msg_error_event error_event; |
| } __packed usbcan; |
| |
| struct kvaser_msg_tx_can tx_can; |
| struct kvaser_msg_ctrl_mode ctrl_mode; |
| struct kvaser_msg_flush_queue flush_queue; |
| } u; |
| } __packed; |
| |
| /* Summary of a kvaser error event, for a unified Leaf/Usbcan error |
| * handling. Some discrepancies between the two families exist: |
| * |
| * - USBCAN firmware does not report M16C "error factors" |
| * - USBCAN controllers has difficulties reporting if the raised error |
| * event is for ch0 or ch1. They leave such arbitration to the OS |
| * driver by letting it compare error counters with previous values |
| * and decide the error event's channel. Thus for USBCAN, the channel |
| * field is only advisory. |
| */ |
| struct kvaser_usb_error_summary { |
| u8 channel, status, txerr, rxerr; |
| union { |
| struct { |
| u8 error_factor; |
| } leaf; |
| struct { |
| u8 other_ch_status; |
| u8 error_state; |
| } usbcan; |
| }; |
| }; |
| |
| /* Context for an outstanding, not yet ACKed, transmission */ |
| struct kvaser_usb_tx_urb_context { |
| struct kvaser_usb_net_priv *priv; |
| u32 echo_index; |
| int dlc; |
| }; |
| |
| struct kvaser_usb { |
| struct usb_device *udev; |
| struct kvaser_usb_net_priv *nets[MAX_NET_DEVICES]; |
| |
| struct usb_endpoint_descriptor *bulk_in, *bulk_out; |
| struct usb_anchor rx_submitted; |
| |
| /* @max_tx_urbs: Firmware-reported maximum number of oustanding, |
| * not yet ACKed, transmissions on this device. This value is |
| * also used as a sentinel for marking free tx contexts. |
| */ |
| u32 fw_version; |
| unsigned int nchannels; |
| unsigned int max_tx_urbs; |
| enum kvaser_usb_family family; |
| |
| bool rxinitdone; |
| void *rxbuf[MAX_RX_URBS]; |
| dma_addr_t rxbuf_dma[MAX_RX_URBS]; |
| }; |
| |
| struct kvaser_usb_net_priv { |
| struct can_priv can; |
| struct can_berr_counter bec; |
| |
| struct kvaser_usb *dev; |
| struct net_device *netdev; |
| int channel; |
| |
| struct completion start_comp, stop_comp; |
| struct usb_anchor tx_submitted; |
| |
| spinlock_t tx_contexts_lock; |
| int active_tx_contexts; |
| struct kvaser_usb_tx_urb_context tx_contexts[]; |
| }; |
| |
| static const struct usb_device_id kvaser_usb_table[] = { |
| /* Leaf family IDs */ |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LS_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_SWC_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_LIN_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_LS_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_SPRO_SWC_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_DEVEL_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSHS_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_UPRO_HSHS_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_GI_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_PRO_OBDII_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS | |
| KVASER_HAS_SILENT_MODE }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMO2_HSLS_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_CH_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_BLACKBIRD_SPRO_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_MERCURY_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_OEM_LEAF_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID) }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID) }, |
| |
| /* USBCANII family IDs */ |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_REVB_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_MEMORATOR_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| { USB_DEVICE(KVASER_VENDOR_ID, USB_VCI2_PRODUCT_ID), |
| .driver_info = KVASER_HAS_TXRX_ERRORS }, |
| |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, kvaser_usb_table); |
| |
| static inline int kvaser_usb_send_msg(const struct kvaser_usb *dev, |
| struct kvaser_msg *msg) |
| { |
| int actual_len; |
| |
| return usb_bulk_msg(dev->udev, |
| usb_sndbulkpipe(dev->udev, |
| dev->bulk_out->bEndpointAddress), |
| msg, msg->len, &actual_len, |
| USB_SEND_TIMEOUT); |
| } |
| |
| static int kvaser_usb_wait_msg(const struct kvaser_usb *dev, u8 id, |
| struct kvaser_msg *msg) |
| { |
| struct kvaser_msg *tmp; |
| void *buf; |
| int actual_len; |
| int err; |
| int pos; |
| unsigned long to = jiffies + msecs_to_jiffies(USB_RECV_TIMEOUT); |
| |
| buf = kzalloc(RX_BUFFER_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| do { |
| err = usb_bulk_msg(dev->udev, |
| usb_rcvbulkpipe(dev->udev, |
| dev->bulk_in->bEndpointAddress), |
| buf, RX_BUFFER_SIZE, &actual_len, |
| USB_RECV_TIMEOUT); |
| if (err < 0) |
| goto end; |
| |
| pos = 0; |
| while (pos <= actual_len - MSG_HEADER_LEN) { |
| tmp = buf + pos; |
| |
| /* Handle messages crossing the USB endpoint max packet |
| * size boundary. Check kvaser_usb_read_bulk_callback() |
| * for further details. |
| */ |
| if (tmp->len == 0) { |
| pos = round_up(pos, le16_to_cpu(dev->bulk_in-> |
| wMaxPacketSize)); |
| continue; |
| } |
| |
| if (pos + tmp->len > actual_len) { |
| dev_err(dev->udev->dev.parent, |
| "Format error\n"); |
| break; |
| } |
| |
| if (tmp->id == id) { |
| memcpy(msg, tmp, tmp->len); |
| goto end; |
| } |
| |
| pos += tmp->len; |
| } |
| } while (time_before(jiffies, to)); |
| |
| err = -EINVAL; |
| |
| end: |
| kfree(buf); |
| |
| return err; |
| } |
| |
| static int kvaser_usb_send_simple_msg(const struct kvaser_usb *dev, |
| u8 msg_id, int channel) |
| { |
| struct kvaser_msg *msg; |
| int rc; |
| |
| msg = kmalloc(sizeof(*msg), GFP_KERNEL); |
| if (!msg) |
| return -ENOMEM; |
| |
| msg->id = msg_id; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_simple); |
| msg->u.simple.channel = channel; |
| msg->u.simple.tid = 0xff; |
| |
| rc = kvaser_usb_send_msg(dev, msg); |
| |
| kfree(msg); |
| return rc; |
| } |
| |
| static int kvaser_usb_get_software_info(struct kvaser_usb *dev) |
| { |
| struct kvaser_msg msg; |
| int err; |
| |
| err = kvaser_usb_send_simple_msg(dev, CMD_GET_SOFTWARE_INFO, 0); |
| if (err) |
| return err; |
| |
| err = kvaser_usb_wait_msg(dev, CMD_GET_SOFTWARE_INFO_REPLY, &msg); |
| if (err) |
| return err; |
| |
| switch (dev->family) { |
| case KVASER_LEAF: |
| dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version); |
| dev->max_tx_urbs = |
| le16_to_cpu(msg.u.leaf.softinfo.max_outstanding_tx); |
| break; |
| case KVASER_USBCAN: |
| dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version); |
| dev->max_tx_urbs = |
| le16_to_cpu(msg.u.usbcan.softinfo.max_outstanding_tx); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_get_card_info(struct kvaser_usb *dev) |
| { |
| struct kvaser_msg msg; |
| int err; |
| |
| err = kvaser_usb_send_simple_msg(dev, CMD_GET_CARD_INFO, 0); |
| if (err) |
| return err; |
| |
| err = kvaser_usb_wait_msg(dev, CMD_GET_CARD_INFO_REPLY, &msg); |
| if (err) |
| return err; |
| |
| dev->nchannels = msg.u.cardinfo.nchannels; |
| if ((dev->nchannels > MAX_NET_DEVICES) || |
| (dev->family == KVASER_USBCAN && |
| dev->nchannels > MAX_USBCAN_NET_DEVICES)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct net_device_stats *stats; |
| struct kvaser_usb_tx_urb_context *context; |
| struct kvaser_usb_net_priv *priv; |
| struct sk_buff *skb; |
| struct can_frame *cf; |
| unsigned long flags; |
| u8 channel, tid; |
| |
| channel = msg->u.tx_acknowledge_header.channel; |
| tid = msg->u.tx_acknowledge_header.tid; |
| |
| if (channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", channel); |
| return; |
| } |
| |
| priv = dev->nets[channel]; |
| |
| if (!netif_device_present(priv->netdev)) |
| return; |
| |
| stats = &priv->netdev->stats; |
| |
| context = &priv->tx_contexts[tid % dev->max_tx_urbs]; |
| |
| /* Sometimes the state change doesn't come after a bus-off event */ |
| if (priv->can.restart_ms && |
| (priv->can.state >= CAN_STATE_BUS_OFF)) { |
| skb = alloc_can_err_skb(priv->netdev, &cf); |
| if (skb) { |
| cf->can_id |= CAN_ERR_RESTARTED; |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| } else { |
| netdev_err(priv->netdev, |
| "No memory left for err_skb\n"); |
| } |
| |
| priv->can.can_stats.restarts++; |
| netif_carrier_on(priv->netdev); |
| |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| } |
| |
| stats->tx_packets++; |
| stats->tx_bytes += context->dlc; |
| |
| spin_lock_irqsave(&priv->tx_contexts_lock, flags); |
| |
| can_get_echo_skb(priv->netdev, context->echo_index); |
| context->echo_index = dev->max_tx_urbs; |
| --priv->active_tx_contexts; |
| netif_wake_queue(priv->netdev); |
| |
| spin_unlock_irqrestore(&priv->tx_contexts_lock, flags); |
| } |
| |
| static void kvaser_usb_simple_msg_callback(struct urb *urb) |
| { |
| struct net_device *netdev = urb->context; |
| |
| kfree(urb->transfer_buffer); |
| |
| if (urb->status) |
| netdev_warn(netdev, "urb status received: %d\n", |
| urb->status); |
| } |
| |
| static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv, |
| u8 msg_id) |
| { |
| struct kvaser_usb *dev = priv->dev; |
| struct net_device *netdev = priv->netdev; |
| struct kvaser_msg *msg; |
| struct urb *urb; |
| void *buf; |
| int err; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| return -ENOMEM; |
| |
| buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); |
| if (!buf) { |
| usb_free_urb(urb); |
| return -ENOMEM; |
| } |
| |
| msg = (struct kvaser_msg *)buf; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_simple); |
| msg->id = msg_id; |
| msg->u.simple.channel = priv->channel; |
| |
| usb_fill_bulk_urb(urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, |
| dev->bulk_out->bEndpointAddress), |
| buf, msg->len, |
| kvaser_usb_simple_msg_callback, netdev); |
| usb_anchor_urb(urb, &priv->tx_submitted); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err) { |
| netdev_err(netdev, "Error transmitting URB\n"); |
| usb_unanchor_urb(urb); |
| usb_free_urb(urb); |
| return err; |
| } |
| |
| usb_free_urb(urb); |
| |
| return 0; |
| } |
| |
| static void kvaser_usb_rx_error_update_can_state(struct kvaser_usb_net_priv *priv, |
| const struct kvaser_usb_error_summary *es, |
| struct can_frame *cf) |
| { |
| struct kvaser_usb *dev = priv->dev; |
| struct net_device_stats *stats = &priv->netdev->stats; |
| enum can_state cur_state, new_state, tx_state, rx_state; |
| |
| netdev_dbg(priv->netdev, "Error status: 0x%02x\n", es->status); |
| |
| new_state = cur_state = priv->can.state; |
| |
| if (es->status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) |
| new_state = CAN_STATE_BUS_OFF; |
| else if (es->status & M16C_STATE_BUS_PASSIVE) |
| new_state = CAN_STATE_ERROR_PASSIVE; |
| else if (es->status & M16C_STATE_BUS_ERROR) { |
| /* Guard against spurious error events after a busoff */ |
| if (cur_state < CAN_STATE_BUS_OFF) { |
| if ((es->txerr >= 128) || (es->rxerr >= 128)) |
| new_state = CAN_STATE_ERROR_PASSIVE; |
| else if ((es->txerr >= 96) || (es->rxerr >= 96)) |
| new_state = CAN_STATE_ERROR_WARNING; |
| else if (cur_state > CAN_STATE_ERROR_ACTIVE) |
| new_state = CAN_STATE_ERROR_ACTIVE; |
| } |
| } |
| |
| if (!es->status) |
| new_state = CAN_STATE_ERROR_ACTIVE; |
| |
| if (new_state != cur_state) { |
| tx_state = (es->txerr >= es->rxerr) ? new_state : 0; |
| rx_state = (es->txerr <= es->rxerr) ? new_state : 0; |
| |
| can_change_state(priv->netdev, cf, tx_state, rx_state); |
| } |
| |
| if (priv->can.restart_ms && |
| (cur_state >= CAN_STATE_BUS_OFF) && |
| (new_state < CAN_STATE_BUS_OFF)) { |
| priv->can.can_stats.restarts++; |
| } |
| |
| switch (dev->family) { |
| case KVASER_LEAF: |
| if (es->leaf.error_factor) { |
| priv->can.can_stats.bus_error++; |
| stats->rx_errors++; |
| } |
| break; |
| case KVASER_USBCAN: |
| if (es->usbcan.error_state & USBCAN_ERROR_STATE_TX_ERROR) |
| stats->tx_errors++; |
| if (es->usbcan.error_state & USBCAN_ERROR_STATE_RX_ERROR) |
| stats->rx_errors++; |
| if (es->usbcan.error_state & USBCAN_ERROR_STATE_BUSERROR) { |
| priv->can.can_stats.bus_error++; |
| } |
| break; |
| } |
| |
| priv->bec.txerr = es->txerr; |
| priv->bec.rxerr = es->rxerr; |
| } |
| |
| static void kvaser_usb_rx_error(const struct kvaser_usb *dev, |
| const struct kvaser_usb_error_summary *es) |
| { |
| struct can_frame *cf, tmp_cf = { .can_id = CAN_ERR_FLAG, .can_dlc = CAN_ERR_DLC }; |
| struct sk_buff *skb; |
| struct net_device_stats *stats; |
| struct kvaser_usb_net_priv *priv; |
| enum can_state old_state, new_state; |
| |
| if (es->channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", es->channel); |
| return; |
| } |
| |
| priv = dev->nets[es->channel]; |
| stats = &priv->netdev->stats; |
| |
| /* Update all of the can interface's state and error counters before |
| * trying any memory allocation that can actually fail with -ENOMEM. |
| * |
| * We send a temporary stack-allocated error can frame to |
| * can_change_state() for the very same reason. |
| * |
| * TODO: Split can_change_state() responsibility between updating the |
| * can interface's state and counters, and the setting up of can error |
| * frame ID and data to userspace. Remove stack allocation afterwards. |
| */ |
| old_state = priv->can.state; |
| kvaser_usb_rx_error_update_can_state(priv, es, &tmp_cf); |
| new_state = priv->can.state; |
| |
| skb = alloc_can_err_skb(priv->netdev, &cf); |
| if (!skb) { |
| stats->rx_dropped++; |
| return; |
| } |
| memcpy(cf, &tmp_cf, sizeof(*cf)); |
| |
| if (new_state != old_state) { |
| if (es->status & |
| (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) { |
| if (!priv->can.restart_ms) |
| kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP); |
| netif_carrier_off(priv->netdev); |
| } |
| |
| if (priv->can.restart_ms && |
| (old_state >= CAN_STATE_BUS_OFF) && |
| (new_state < CAN_STATE_BUS_OFF)) { |
| cf->can_id |= CAN_ERR_RESTARTED; |
| netif_carrier_on(priv->netdev); |
| } |
| } |
| |
| switch (dev->family) { |
| case KVASER_LEAF: |
| if (es->leaf.error_factor) { |
| cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT; |
| |
| if (es->leaf.error_factor & M16C_EF_ACKE) |
| cf->data[3] = CAN_ERR_PROT_LOC_ACK; |
| if (es->leaf.error_factor & M16C_EF_CRCE) |
| cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; |
| if (es->leaf.error_factor & M16C_EF_FORME) |
| cf->data[2] |= CAN_ERR_PROT_FORM; |
| if (es->leaf.error_factor & M16C_EF_STFE) |
| cf->data[2] |= CAN_ERR_PROT_STUFF; |
| if (es->leaf.error_factor & M16C_EF_BITE0) |
| cf->data[2] |= CAN_ERR_PROT_BIT0; |
| if (es->leaf.error_factor & M16C_EF_BITE1) |
| cf->data[2] |= CAN_ERR_PROT_BIT1; |
| if (es->leaf.error_factor & M16C_EF_TRE) |
| cf->data[2] |= CAN_ERR_PROT_TX; |
| } |
| break; |
| case KVASER_USBCAN: |
| if (es->usbcan.error_state & USBCAN_ERROR_STATE_BUSERROR) { |
| cf->can_id |= CAN_ERR_BUSERROR; |
| } |
| break; |
| } |
| |
| cf->data[6] = es->txerr; |
| cf->data[7] = es->rxerr; |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| } |
| |
| /* For USBCAN, report error to userspace iff the channels's errors counter |
| * has changed, or we're the only channel seeing a bus error state. |
| */ |
| static void kvaser_usbcan_conditionally_rx_error(const struct kvaser_usb *dev, |
| struct kvaser_usb_error_summary *es) |
| { |
| struct kvaser_usb_net_priv *priv; |
| int channel; |
| bool report_error; |
| |
| channel = es->channel; |
| if (channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", channel); |
| return; |
| } |
| |
| priv = dev->nets[channel]; |
| report_error = false; |
| |
| if (es->txerr != priv->bec.txerr) { |
| es->usbcan.error_state |= USBCAN_ERROR_STATE_TX_ERROR; |
| report_error = true; |
| } |
| if (es->rxerr != priv->bec.rxerr) { |
| es->usbcan.error_state |= USBCAN_ERROR_STATE_RX_ERROR; |
| report_error = true; |
| } |
| if ((es->status & M16C_STATE_BUS_ERROR) && |
| !(es->usbcan.other_ch_status & M16C_STATE_BUS_ERROR)) { |
| es->usbcan.error_state |= USBCAN_ERROR_STATE_BUSERROR; |
| report_error = true; |
| } |
| |
| if (report_error) |
| kvaser_usb_rx_error(dev, es); |
| } |
| |
| static void kvaser_usbcan_rx_error(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct kvaser_usb_error_summary es = { }; |
| |
| switch (msg->id) { |
| /* Sometimes errors are sent as unsolicited chip state events */ |
| case CMD_CHIP_STATE_EVENT: |
| es.channel = msg->u.usbcan.chip_state_event.channel; |
| es.status = msg->u.usbcan.chip_state_event.status; |
| es.txerr = msg->u.usbcan.chip_state_event.tx_errors_count; |
| es.rxerr = msg->u.usbcan.chip_state_event.rx_errors_count; |
| kvaser_usbcan_conditionally_rx_error(dev, &es); |
| break; |
| |
| case CMD_CAN_ERROR_EVENT: |
| es.channel = 0; |
| es.status = msg->u.usbcan.error_event.status_ch0; |
| es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch0; |
| es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch0; |
| es.usbcan.other_ch_status = |
| msg->u.usbcan.error_event.status_ch1; |
| kvaser_usbcan_conditionally_rx_error(dev, &es); |
| |
| /* The USBCAN firmware supports up to 2 channels. |
| * Now that ch0 was checked, check if ch1 has any errors. |
| */ |
| if (dev->nchannels == MAX_USBCAN_NET_DEVICES) { |
| es.channel = 1; |
| es.status = msg->u.usbcan.error_event.status_ch1; |
| es.txerr = msg->u.usbcan.error_event.tx_errors_count_ch1; |
| es.rxerr = msg->u.usbcan.error_event.rx_errors_count_ch1; |
| es.usbcan.other_ch_status = |
| msg->u.usbcan.error_event.status_ch0; |
| kvaser_usbcan_conditionally_rx_error(dev, &es); |
| } |
| break; |
| |
| default: |
| dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n", |
| msg->id); |
| } |
| } |
| |
| static void kvaser_leaf_rx_error(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct kvaser_usb_error_summary es = { }; |
| |
| switch (msg->id) { |
| case CMD_CAN_ERROR_EVENT: |
| es.channel = msg->u.leaf.error_event.channel; |
| es.status = msg->u.leaf.error_event.status; |
| es.txerr = msg->u.leaf.error_event.tx_errors_count; |
| es.rxerr = msg->u.leaf.error_event.rx_errors_count; |
| es.leaf.error_factor = msg->u.leaf.error_event.error_factor; |
| break; |
| case CMD_LEAF_LOG_MESSAGE: |
| es.channel = msg->u.leaf.log_message.channel; |
| es.status = msg->u.leaf.log_message.data[0]; |
| es.txerr = msg->u.leaf.log_message.data[2]; |
| es.rxerr = msg->u.leaf.log_message.data[3]; |
| es.leaf.error_factor = msg->u.leaf.log_message.data[1]; |
| break; |
| case CMD_CHIP_STATE_EVENT: |
| es.channel = msg->u.leaf.chip_state_event.channel; |
| es.status = msg->u.leaf.chip_state_event.status; |
| es.txerr = msg->u.leaf.chip_state_event.tx_errors_count; |
| es.rxerr = msg->u.leaf.chip_state_event.rx_errors_count; |
| es.leaf.error_factor = 0; |
| break; |
| default: |
| dev_err(dev->udev->dev.parent, "Invalid msg id (%d)\n", |
| msg->id); |
| return; |
| } |
| |
| kvaser_usb_rx_error(dev, &es); |
| } |
| |
| static void kvaser_usb_rx_can_err(const struct kvaser_usb_net_priv *priv, |
| const struct kvaser_msg *msg) |
| { |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| struct net_device_stats *stats = &priv->netdev->stats; |
| |
| if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME | |
| MSG_FLAG_NERR)) { |
| netdev_err(priv->netdev, "Unknown error (flags: 0x%02x)\n", |
| msg->u.rx_can_header.flag); |
| |
| stats->rx_errors++; |
| return; |
| } |
| |
| if (msg->u.rx_can_header.flag & MSG_FLAG_OVERRUN) { |
| stats->rx_over_errors++; |
| stats->rx_errors++; |
| |
| skb = alloc_can_err_skb(priv->netdev, &cf); |
| if (!skb) { |
| stats->rx_dropped++; |
| return; |
| } |
| |
| cf->can_id |= CAN_ERR_CRTL; |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| } |
| } |
| |
| static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct kvaser_usb_net_priv *priv; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| struct net_device_stats *stats; |
| u8 channel = msg->u.rx_can_header.channel; |
| const u8 *rx_msg = NULL; /* GCC */ |
| |
| if (channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", channel); |
| return; |
| } |
| |
| priv = dev->nets[channel]; |
| stats = &priv->netdev->stats; |
| |
| if ((msg->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) && |
| (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE)) { |
| kvaser_leaf_rx_error(dev, msg); |
| return; |
| } else if (msg->u.rx_can_header.flag & (MSG_FLAG_ERROR_FRAME | |
| MSG_FLAG_NERR | |
| MSG_FLAG_OVERRUN)) { |
| kvaser_usb_rx_can_err(priv, msg); |
| return; |
| } else if (msg->u.rx_can_header.flag & ~MSG_FLAG_REMOTE_FRAME) { |
| netdev_warn(priv->netdev, |
| "Unhandled frame (flags: 0x%02x)", |
| msg->u.rx_can_header.flag); |
| return; |
| } |
| |
| switch (dev->family) { |
| case KVASER_LEAF: |
| rx_msg = msg->u.leaf.rx_can.msg; |
| break; |
| case KVASER_USBCAN: |
| rx_msg = msg->u.usbcan.rx_can.msg; |
| break; |
| } |
| |
| skb = alloc_can_skb(priv->netdev, &cf); |
| if (!skb) { |
| stats->tx_dropped++; |
| return; |
| } |
| |
| if (dev->family == KVASER_LEAF && msg->id == CMD_LEAF_LOG_MESSAGE) { |
| cf->can_id = le32_to_cpu(msg->u.leaf.log_message.id); |
| if (cf->can_id & KVASER_EXTENDED_FRAME) |
| cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; |
| else |
| cf->can_id &= CAN_SFF_MASK; |
| |
| cf->can_dlc = get_can_dlc(msg->u.leaf.log_message.dlc); |
| |
| if (msg->u.leaf.log_message.flags & MSG_FLAG_REMOTE_FRAME) |
| cf->can_id |= CAN_RTR_FLAG; |
| else |
| memcpy(cf->data, &msg->u.leaf.log_message.data, |
| cf->can_dlc); |
| } else { |
| cf->can_id = ((rx_msg[0] & 0x1f) << 6) | (rx_msg[1] & 0x3f); |
| |
| if (msg->id == CMD_RX_EXT_MESSAGE) { |
| cf->can_id <<= 18; |
| cf->can_id |= ((rx_msg[2] & 0x0f) << 14) | |
| ((rx_msg[3] & 0xff) << 6) | |
| (rx_msg[4] & 0x3f); |
| cf->can_id |= CAN_EFF_FLAG; |
| } |
| |
| cf->can_dlc = get_can_dlc(rx_msg[5]); |
| |
| if (msg->u.rx_can_header.flag & MSG_FLAG_REMOTE_FRAME) |
| cf->can_id |= CAN_RTR_FLAG; |
| else |
| memcpy(cf->data, &rx_msg[6], |
| cf->can_dlc); |
| } |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| } |
| |
| static void kvaser_usb_start_chip_reply(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct kvaser_usb_net_priv *priv; |
| u8 channel = msg->u.simple.channel; |
| |
| if (channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", channel); |
| return; |
| } |
| |
| priv = dev->nets[channel]; |
| |
| if (completion_done(&priv->start_comp) && |
| netif_queue_stopped(priv->netdev)) { |
| netif_wake_queue(priv->netdev); |
| } else { |
| netif_start_queue(priv->netdev); |
| complete(&priv->start_comp); |
| } |
| } |
| |
| static void kvaser_usb_stop_chip_reply(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| struct kvaser_usb_net_priv *priv; |
| u8 channel = msg->u.simple.channel; |
| |
| if (channel >= dev->nchannels) { |
| dev_err(dev->udev->dev.parent, |
| "Invalid channel number (%d)\n", channel); |
| return; |
| } |
| |
| priv = dev->nets[channel]; |
| |
| complete(&priv->stop_comp); |
| } |
| |
| static void kvaser_usb_handle_message(const struct kvaser_usb *dev, |
| const struct kvaser_msg *msg) |
| { |
| switch (msg->id) { |
| case CMD_START_CHIP_REPLY: |
| kvaser_usb_start_chip_reply(dev, msg); |
| break; |
| |
| case CMD_STOP_CHIP_REPLY: |
| kvaser_usb_stop_chip_reply(dev, msg); |
| break; |
| |
| case CMD_RX_STD_MESSAGE: |
| case CMD_RX_EXT_MESSAGE: |
| kvaser_usb_rx_can_msg(dev, msg); |
| break; |
| |
| case CMD_LEAF_LOG_MESSAGE: |
| if (dev->family != KVASER_LEAF) |
| goto warn; |
| kvaser_usb_rx_can_msg(dev, msg); |
| break; |
| |
| case CMD_CHIP_STATE_EVENT: |
| case CMD_CAN_ERROR_EVENT: |
| if (dev->family == KVASER_LEAF) |
| kvaser_leaf_rx_error(dev, msg); |
| else |
| kvaser_usbcan_rx_error(dev, msg); |
| break; |
| |
| case CMD_TX_ACKNOWLEDGE: |
| kvaser_usb_tx_acknowledge(dev, msg); |
| break; |
| |
| /* Ignored messages */ |
| case CMD_USBCAN_CLOCK_OVERFLOW_EVENT: |
| if (dev->family != KVASER_USBCAN) |
| goto warn; |
| break; |
| |
| default: |
| warn: dev_warn(dev->udev->dev.parent, |
| "Unhandled message (%d)\n", msg->id); |
| break; |
| } |
| } |
| |
| static void kvaser_usb_read_bulk_callback(struct urb *urb) |
| { |
| struct kvaser_usb *dev = urb->context; |
| struct kvaser_msg *msg; |
| int pos = 0; |
| int err, i; |
| |
| switch (urb->status) { |
| case 0: |
| break; |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: |
| dev_info(dev->udev->dev.parent, "Rx URB aborted (%d)\n", |
| urb->status); |
| goto resubmit_urb; |
| } |
| |
| while (pos <= urb->actual_length - MSG_HEADER_LEN) { |
| msg = urb->transfer_buffer + pos; |
| |
| /* The Kvaser firmware can only read and write messages that |
| * does not cross the USB's endpoint wMaxPacketSize boundary. |
| * If a follow-up command crosses such boundary, firmware puts |
| * a placeholder zero-length command in its place then aligns |
| * the real command to the next max packet size. |
| * |
| * Handle such cases or we're going to miss a significant |
| * number of events in case of a heavy rx load on the bus. |
| */ |
| if (msg->len == 0) { |
| pos = round_up(pos, le16_to_cpu(dev->bulk_in-> |
| wMaxPacketSize)); |
| continue; |
| } |
| |
| if (pos + msg->len > urb->actual_length) { |
| dev_err(dev->udev->dev.parent, "Format error\n"); |
| break; |
| } |
| |
| kvaser_usb_handle_message(dev, msg); |
| pos += msg->len; |
| } |
| |
| resubmit_urb: |
| usb_fill_bulk_urb(urb, dev->udev, |
| usb_rcvbulkpipe(dev->udev, |
| dev->bulk_in->bEndpointAddress), |
| urb->transfer_buffer, RX_BUFFER_SIZE, |
| kvaser_usb_read_bulk_callback, dev); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err == -ENODEV) { |
| for (i = 0; i < dev->nchannels; i++) { |
| if (!dev->nets[i]) |
| continue; |
| |
| netif_device_detach(dev->nets[i]->netdev); |
| } |
| } else if (err) { |
| dev_err(dev->udev->dev.parent, |
| "Failed resubmitting read bulk urb: %d\n", err); |
| } |
| |
| return; |
| } |
| |
| static int kvaser_usb_setup_rx_urbs(struct kvaser_usb *dev) |
| { |
| int i, err = 0; |
| |
| if (dev->rxinitdone) |
| return 0; |
| |
| for (i = 0; i < MAX_RX_URBS; i++) { |
| struct urb *urb = NULL; |
| u8 *buf = NULL; |
| dma_addr_t buf_dma; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| err = -ENOMEM; |
| break; |
| } |
| |
| buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, |
| GFP_KERNEL, &buf_dma); |
| if (!buf) { |
| dev_warn(dev->udev->dev.parent, |
| "No memory left for USB buffer\n"); |
| usb_free_urb(urb); |
| err = -ENOMEM; |
| break; |
| } |
| |
| usb_fill_bulk_urb(urb, dev->udev, |
| usb_rcvbulkpipe(dev->udev, |
| dev->bulk_in->bEndpointAddress), |
| buf, RX_BUFFER_SIZE, |
| kvaser_usb_read_bulk_callback, |
| dev); |
| urb->transfer_dma = buf_dma; |
| urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| usb_anchor_urb(urb, &dev->rx_submitted); |
| |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err) { |
| usb_unanchor_urb(urb); |
| usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf, |
| buf_dma); |
| usb_free_urb(urb); |
| break; |
| } |
| |
| dev->rxbuf[i] = buf; |
| dev->rxbuf_dma[i] = buf_dma; |
| |
| usb_free_urb(urb); |
| } |
| |
| if (i == 0) { |
| dev_warn(dev->udev->dev.parent, |
| "Cannot setup read URBs, error %d\n", err); |
| return err; |
| } else if (i < MAX_RX_URBS) { |
| dev_warn(dev->udev->dev.parent, |
| "RX performances may be slow\n"); |
| } |
| |
| dev->rxinitdone = true; |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_set_opt_mode(const struct kvaser_usb_net_priv *priv) |
| { |
| struct kvaser_msg *msg; |
| int rc; |
| |
| msg = kmalloc(sizeof(*msg), GFP_KERNEL); |
| if (!msg) |
| return -ENOMEM; |
| |
| msg->id = CMD_SET_CTRL_MODE; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_ctrl_mode); |
| msg->u.ctrl_mode.tid = 0xff; |
| msg->u.ctrl_mode.channel = priv->channel; |
| |
| if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) |
| msg->u.ctrl_mode.ctrl_mode = KVASER_CTRL_MODE_SILENT; |
| else |
| msg->u.ctrl_mode.ctrl_mode = KVASER_CTRL_MODE_NORMAL; |
| |
| rc = kvaser_usb_send_msg(priv->dev, msg); |
| |
| kfree(msg); |
| return rc; |
| } |
| |
| static int kvaser_usb_start_chip(struct kvaser_usb_net_priv *priv) |
| { |
| int err; |
| |
| init_completion(&priv->start_comp); |
| |
| err = kvaser_usb_send_simple_msg(priv->dev, CMD_START_CHIP, |
| priv->channel); |
| if (err) |
| return err; |
| |
| if (!wait_for_completion_timeout(&priv->start_comp, |
| msecs_to_jiffies(START_TIMEOUT))) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_open(struct net_device *netdev) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| struct kvaser_usb *dev = priv->dev; |
| int err; |
| |
| err = open_candev(netdev); |
| if (err) |
| return err; |
| |
| err = kvaser_usb_setup_rx_urbs(dev); |
| if (err) |
| goto error; |
| |
| err = kvaser_usb_set_opt_mode(priv); |
| if (err) |
| goto error; |
| |
| err = kvaser_usb_start_chip(priv); |
| if (err) { |
| netdev_warn(netdev, "Cannot start device, error %d\n", err); |
| goto error; |
| } |
| |
| priv->can.state = CAN_STATE_ERROR_ACTIVE; |
| |
| return 0; |
| |
| error: |
| close_candev(netdev); |
| return err; |
| } |
| |
| static void kvaser_usb_reset_tx_urb_contexts(struct kvaser_usb_net_priv *priv) |
| { |
| int i, max_tx_urbs; |
| |
| max_tx_urbs = priv->dev->max_tx_urbs; |
| |
| priv->active_tx_contexts = 0; |
| for (i = 0; i < max_tx_urbs; i++) |
| priv->tx_contexts[i].echo_index = max_tx_urbs; |
| } |
| |
| /* This method might sleep. Do not call it in the atomic context |
| * of URB completions. |
| */ |
| static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv) |
| { |
| usb_kill_anchored_urbs(&priv->tx_submitted); |
| kvaser_usb_reset_tx_urb_contexts(priv); |
| } |
| |
| static void kvaser_usb_unlink_all_urbs(struct kvaser_usb *dev) |
| { |
| int i; |
| |
| usb_kill_anchored_urbs(&dev->rx_submitted); |
| |
| for (i = 0; i < MAX_RX_URBS; i++) |
| usb_free_coherent(dev->udev, RX_BUFFER_SIZE, |
| dev->rxbuf[i], |
| dev->rxbuf_dma[i]); |
| |
| for (i = 0; i < dev->nchannels; i++) { |
| struct kvaser_usb_net_priv *priv = dev->nets[i]; |
| |
| if (priv) |
| kvaser_usb_unlink_tx_urbs(priv); |
| } |
| } |
| |
| static int kvaser_usb_stop_chip(struct kvaser_usb_net_priv *priv) |
| { |
| int err; |
| |
| init_completion(&priv->stop_comp); |
| |
| err = kvaser_usb_send_simple_msg(priv->dev, CMD_STOP_CHIP, |
| priv->channel); |
| if (err) |
| return err; |
| |
| if (!wait_for_completion_timeout(&priv->stop_comp, |
| msecs_to_jiffies(STOP_TIMEOUT))) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_flush_queue(struct kvaser_usb_net_priv *priv) |
| { |
| struct kvaser_msg *msg; |
| int rc; |
| |
| msg = kmalloc(sizeof(*msg), GFP_KERNEL); |
| if (!msg) |
| return -ENOMEM; |
| |
| msg->id = CMD_FLUSH_QUEUE; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_flush_queue); |
| msg->u.flush_queue.channel = priv->channel; |
| msg->u.flush_queue.flags = 0x00; |
| |
| rc = kvaser_usb_send_msg(priv->dev, msg); |
| |
| kfree(msg); |
| return rc; |
| } |
| |
| static int kvaser_usb_close(struct net_device *netdev) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| struct kvaser_usb *dev = priv->dev; |
| int err; |
| |
| netif_stop_queue(netdev); |
| |
| err = kvaser_usb_flush_queue(priv); |
| if (err) |
| netdev_warn(netdev, "Cannot flush queue, error %d\n", err); |
| |
| if (kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, priv->channel)) |
| netdev_warn(netdev, "Cannot reset card, error %d\n", err); |
| |
| err = kvaser_usb_stop_chip(priv); |
| if (err) |
| netdev_warn(netdev, "Cannot stop device, error %d\n", err); |
| |
| /* reset tx contexts */ |
| kvaser_usb_unlink_tx_urbs(priv); |
| |
| priv->can.state = CAN_STATE_STOPPED; |
| close_candev(priv->netdev); |
| |
| return 0; |
| } |
| |
| static void kvaser_usb_write_bulk_callback(struct urb *urb) |
| { |
| struct kvaser_usb_tx_urb_context *context = urb->context; |
| struct kvaser_usb_net_priv *priv; |
| struct net_device *netdev; |
| |
| if (WARN_ON(!context)) |
| return; |
| |
| priv = context->priv; |
| netdev = priv->netdev; |
| |
| kfree(urb->transfer_buffer); |
| |
| if (!netif_device_present(netdev)) |
| return; |
| |
| if (urb->status) |
| netdev_info(netdev, "Tx URB aborted (%d)\n", urb->status); |
| } |
| |
| static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| struct kvaser_usb *dev = priv->dev; |
| struct net_device_stats *stats = &netdev->stats; |
| struct can_frame *cf = (struct can_frame *)skb->data; |
| struct kvaser_usb_tx_urb_context *context = NULL; |
| struct urb *urb; |
| void *buf; |
| struct kvaser_msg *msg; |
| int i, err, ret = NETDEV_TX_OK; |
| u8 *msg_tx_can_flags = NULL; /* GCC */ |
| unsigned long flags; |
| |
| if (can_dropped_invalid_skb(netdev, skb)) |
| return NETDEV_TX_OK; |
| |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) { |
| stats->tx_dropped++; |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| buf = kmalloc(sizeof(struct kvaser_msg), GFP_ATOMIC); |
| if (!buf) { |
| stats->tx_dropped++; |
| dev_kfree_skb(skb); |
| goto freeurb; |
| } |
| |
| msg = buf; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_tx_can); |
| msg->u.tx_can.channel = priv->channel; |
| |
| switch (dev->family) { |
| case KVASER_LEAF: |
| msg_tx_can_flags = &msg->u.tx_can.leaf.flags; |
| break; |
| case KVASER_USBCAN: |
| msg_tx_can_flags = &msg->u.tx_can.usbcan.flags; |
| break; |
| } |
| |
| *msg_tx_can_flags = 0; |
| |
| if (cf->can_id & CAN_EFF_FLAG) { |
| msg->id = CMD_TX_EXT_MESSAGE; |
| msg->u.tx_can.msg[0] = (cf->can_id >> 24) & 0x1f; |
| msg->u.tx_can.msg[1] = (cf->can_id >> 18) & 0x3f; |
| msg->u.tx_can.msg[2] = (cf->can_id >> 14) & 0x0f; |
| msg->u.tx_can.msg[3] = (cf->can_id >> 6) & 0xff; |
| msg->u.tx_can.msg[4] = cf->can_id & 0x3f; |
| } else { |
| msg->id = CMD_TX_STD_MESSAGE; |
| msg->u.tx_can.msg[0] = (cf->can_id >> 6) & 0x1f; |
| msg->u.tx_can.msg[1] = cf->can_id & 0x3f; |
| } |
| |
| msg->u.tx_can.msg[5] = cf->can_dlc; |
| memcpy(&msg->u.tx_can.msg[6], cf->data, cf->can_dlc); |
| |
| if (cf->can_id & CAN_RTR_FLAG) |
| *msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME; |
| |
| spin_lock_irqsave(&priv->tx_contexts_lock, flags); |
| for (i = 0; i < dev->max_tx_urbs; i++) { |
| if (priv->tx_contexts[i].echo_index == dev->max_tx_urbs) { |
| context = &priv->tx_contexts[i]; |
| |
| context->echo_index = i; |
| can_put_echo_skb(skb, netdev, context->echo_index); |
| ++priv->active_tx_contexts; |
| if (priv->active_tx_contexts >= dev->max_tx_urbs) |
| netif_stop_queue(netdev); |
| |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&priv->tx_contexts_lock, flags); |
| |
| /* This should never happen; it implies a flow control bug */ |
| if (!context) { |
| netdev_warn(netdev, "cannot find free context\n"); |
| |
| kfree(buf); |
| ret = NETDEV_TX_BUSY; |
| goto freeurb; |
| } |
| |
| context->priv = priv; |
| context->dlc = cf->can_dlc; |
| |
| msg->u.tx_can.tid = context->echo_index; |
| |
| usb_fill_bulk_urb(urb, dev->udev, |
| usb_sndbulkpipe(dev->udev, |
| dev->bulk_out->bEndpointAddress), |
| buf, msg->len, |
| kvaser_usb_write_bulk_callback, context); |
| usb_anchor_urb(urb, &priv->tx_submitted); |
| |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (unlikely(err)) { |
| spin_lock_irqsave(&priv->tx_contexts_lock, flags); |
| |
| can_free_echo_skb(netdev, context->echo_index); |
| context->echo_index = dev->max_tx_urbs; |
| --priv->active_tx_contexts; |
| netif_wake_queue(netdev); |
| |
| spin_unlock_irqrestore(&priv->tx_contexts_lock, flags); |
| |
| usb_unanchor_urb(urb); |
| |
| stats->tx_dropped++; |
| |
| if (err == -ENODEV) |
| netif_device_detach(netdev); |
| else |
| netdev_warn(netdev, "Failed tx_urb %d\n", err); |
| |
| goto freeurb; |
| } |
| |
| ret = NETDEV_TX_OK; |
| |
| freeurb: |
| usb_free_urb(urb); |
| return ret; |
| } |
| |
| static const struct net_device_ops kvaser_usb_netdev_ops = { |
| .ndo_open = kvaser_usb_open, |
| .ndo_stop = kvaser_usb_close, |
| .ndo_start_xmit = kvaser_usb_start_xmit, |
| .ndo_change_mtu = can_change_mtu, |
| }; |
| |
| static const struct can_bittiming_const kvaser_usb_bittiming_const = { |
| .name = "kvaser_usb", |
| .tseg1_min = KVASER_USB_TSEG1_MIN, |
| .tseg1_max = KVASER_USB_TSEG1_MAX, |
| .tseg2_min = KVASER_USB_TSEG2_MIN, |
| .tseg2_max = KVASER_USB_TSEG2_MAX, |
| .sjw_max = KVASER_USB_SJW_MAX, |
| .brp_min = KVASER_USB_BRP_MIN, |
| .brp_max = KVASER_USB_BRP_MAX, |
| .brp_inc = KVASER_USB_BRP_INC, |
| }; |
| |
| static int kvaser_usb_set_bittiming(struct net_device *netdev) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| struct can_bittiming *bt = &priv->can.bittiming; |
| struct kvaser_usb *dev = priv->dev; |
| struct kvaser_msg *msg; |
| int rc; |
| |
| msg = kmalloc(sizeof(*msg), GFP_KERNEL); |
| if (!msg) |
| return -ENOMEM; |
| |
| msg->id = CMD_SET_BUS_PARAMS; |
| msg->len = MSG_HEADER_LEN + sizeof(struct kvaser_msg_busparams); |
| msg->u.busparams.channel = priv->channel; |
| msg->u.busparams.tid = 0xff; |
| msg->u.busparams.bitrate = cpu_to_le32(bt->bitrate); |
| msg->u.busparams.sjw = bt->sjw; |
| msg->u.busparams.tseg1 = bt->prop_seg + bt->phase_seg1; |
| msg->u.busparams.tseg2 = bt->phase_seg2; |
| |
| if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| msg->u.busparams.no_samp = 3; |
| else |
| msg->u.busparams.no_samp = 1; |
| |
| rc = kvaser_usb_send_msg(dev, msg); |
| |
| kfree(msg); |
| return rc; |
| } |
| |
| static int kvaser_usb_set_mode(struct net_device *netdev, |
| enum can_mode mode) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| int err; |
| |
| switch (mode) { |
| case CAN_MODE_START: |
| err = kvaser_usb_simple_msg_async(priv, CMD_START_CHIP); |
| if (err) |
| return err; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_get_berr_counter(const struct net_device *netdev, |
| struct can_berr_counter *bec) |
| { |
| struct kvaser_usb_net_priv *priv = netdev_priv(netdev); |
| |
| *bec = priv->bec; |
| |
| return 0; |
| } |
| |
| static void kvaser_usb_remove_interfaces(struct kvaser_usb *dev) |
| { |
| int i; |
| |
| for (i = 0; i < dev->nchannels; i++) { |
| if (!dev->nets[i]) |
| continue; |
| |
| unregister_candev(dev->nets[i]->netdev); |
| } |
| |
| kvaser_usb_unlink_all_urbs(dev); |
| |
| for (i = 0; i < dev->nchannels; i++) { |
| if (!dev->nets[i]) |
| continue; |
| |
| free_candev(dev->nets[i]->netdev); |
| } |
| } |
| |
| static int kvaser_usb_init_one(struct usb_interface *intf, |
| const struct usb_device_id *id, int channel) |
| { |
| struct kvaser_usb *dev = usb_get_intfdata(intf); |
| struct net_device *netdev; |
| struct kvaser_usb_net_priv *priv; |
| int err; |
| |
| err = kvaser_usb_send_simple_msg(dev, CMD_RESET_CHIP, channel); |
| if (err) |
| return err; |
| |
| netdev = alloc_candev(sizeof(*priv) + |
| dev->max_tx_urbs * sizeof(*priv->tx_contexts), |
| dev->max_tx_urbs); |
| if (!netdev) { |
| dev_err(&intf->dev, "Cannot alloc candev\n"); |
| return -ENOMEM; |
| } |
| |
| priv = netdev_priv(netdev); |
| |
| init_usb_anchor(&priv->tx_submitted); |
| init_completion(&priv->start_comp); |
| init_completion(&priv->stop_comp); |
| |
| priv->dev = dev; |
| priv->netdev = netdev; |
| priv->channel = channel; |
| |
| spin_lock_init(&priv->tx_contexts_lock); |
| kvaser_usb_reset_tx_urb_contexts(priv); |
| |
| priv->can.state = CAN_STATE_STOPPED; |
| priv->can.clock.freq = CAN_USB_CLOCK; |
| priv->can.bittiming_const = &kvaser_usb_bittiming_const; |
| priv->can.do_set_bittiming = kvaser_usb_set_bittiming; |
| priv->can.do_set_mode = kvaser_usb_set_mode; |
| if (id->driver_info & KVASER_HAS_TXRX_ERRORS) |
| priv->can.do_get_berr_counter = kvaser_usb_get_berr_counter; |
| priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; |
| if (id->driver_info & KVASER_HAS_SILENT_MODE) |
| priv->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY; |
| |
| netdev->flags |= IFF_ECHO; |
| |
| netdev->netdev_ops = &kvaser_usb_netdev_ops; |
| |
| SET_NETDEV_DEV(netdev, &intf->dev); |
| netdev->dev_id = channel; |
| |
| dev->nets[channel] = priv; |
| |
| err = register_candev(netdev); |
| if (err) { |
| dev_err(&intf->dev, "Failed to register can device\n"); |
| free_candev(netdev); |
| dev->nets[channel] = NULL; |
| return err; |
| } |
| |
| netdev_dbg(netdev, "device registered\n"); |
| |
| return 0; |
| } |
| |
| static int kvaser_usb_get_endpoints(const struct usb_interface *intf, |
| struct usb_endpoint_descriptor **in, |
| struct usb_endpoint_descriptor **out) |
| { |
| const struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int i; |
| |
| iface_desc = &intf->altsetting[0]; |
| |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| if (!*in && usb_endpoint_is_bulk_in(endpoint)) |
| *in = endpoint; |
| |
| if (!*out && usb_endpoint_is_bulk_out(endpoint)) |
| *out = endpoint; |
| |
| /* use first bulk endpoint for in and out */ |
| if (*in && *out) |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static int kvaser_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct kvaser_usb *dev; |
| int err = -ENOMEM; |
| int i, retry = 3; |
| |
| dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| if (kvaser_is_leaf(id)) { |
| dev->family = KVASER_LEAF; |
| } else if (kvaser_is_usbcan(id)) { |
| dev->family = KVASER_USBCAN; |
| } else { |
| dev_err(&intf->dev, |
| "Product ID (%d) does not belong to any known Kvaser USB family", |
| id->idProduct); |
| return -ENODEV; |
| } |
| |
| err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out); |
| if (err) { |
| dev_err(&intf->dev, "Cannot get usb endpoint(s)"); |
| return err; |
| } |
| |
| dev->udev = interface_to_usbdev(intf); |
| |
| init_usb_anchor(&dev->rx_submitted); |
| |
| usb_set_intfdata(intf, dev); |
| |
| /* On some x86 laptops, plugging a Kvaser device again after |
| * an unplug makes the firmware always ignore the very first |
| * command. For such a case, provide some room for retries |
| * instead of completely exiting the driver. |
| */ |
| do { |
| err = kvaser_usb_get_software_info(dev); |
| } while (--retry && err == -ETIMEDOUT); |
| |
| if (err) { |
| dev_err(&intf->dev, |
| "Cannot get software infos, error %d\n", err); |
| return err; |
| } |
| |
| dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n", |
| ((dev->fw_version >> 24) & 0xff), |
| ((dev->fw_version >> 16) & 0xff), |
| (dev->fw_version & 0xffff)); |
| |
| dev_dbg(&intf->dev, "Max oustanding tx = %d URBs\n", dev->max_tx_urbs); |
| |
| err = kvaser_usb_get_card_info(dev); |
| if (err) { |
| dev_err(&intf->dev, |
| "Cannot get card infos, error %d\n", err); |
| return err; |
| } |
| |
| for (i = 0; i < dev->nchannels; i++) { |
| err = kvaser_usb_init_one(intf, id, i); |
| if (err) { |
| kvaser_usb_remove_interfaces(dev); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void kvaser_usb_disconnect(struct usb_interface *intf) |
| { |
| struct kvaser_usb *dev = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| |
| if (!dev) |
| return; |
| |
| kvaser_usb_remove_interfaces(dev); |
| } |
| |
| static struct usb_driver kvaser_usb_driver = { |
| .name = "kvaser_usb", |
| .probe = kvaser_usb_probe, |
| .disconnect = kvaser_usb_disconnect, |
| .id_table = kvaser_usb_table, |
| }; |
| |
| module_usb_driver(kvaser_usb_driver); |
| |
| MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); |
| MODULE_DESCRIPTION("CAN driver for Kvaser CAN/USB devices"); |
| MODULE_LICENSE("GPL v2"); |