| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2023, Microsoft Corporation. |
| * |
| * Author: |
| * Saurabh Sengar <ssengar@microsoft.com> |
| */ |
| |
| #include <asm/apic.h> |
| #include <asm/boot.h> |
| #include <asm/desc.h> |
| #include <asm/i8259.h> |
| #include <asm/mshyperv.h> |
| #include <asm/realmode.h> |
| |
| extern struct boot_params boot_params; |
| static struct real_mode_header hv_vtl_real_mode_header; |
| |
| void __init hv_vtl_init_platform(void) |
| { |
| pr_info("Linux runs in Hyper-V Virtual Trust Level\n"); |
| |
| x86_platform.realmode_reserve = x86_init_noop; |
| x86_platform.realmode_init = x86_init_noop; |
| x86_init.irqs.pre_vector_init = x86_init_noop; |
| x86_init.timers.timer_init = x86_init_noop; |
| |
| /* Avoid searching for BIOS MP tables */ |
| x86_init.mpparse.find_smp_config = x86_init_noop; |
| x86_init.mpparse.get_smp_config = x86_init_uint_noop; |
| |
| x86_platform.get_wallclock = get_rtc_noop; |
| x86_platform.set_wallclock = set_rtc_noop; |
| x86_platform.get_nmi_reason = hv_get_nmi_reason; |
| |
| x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT; |
| x86_platform.legacy.rtc = 0; |
| x86_platform.legacy.warm_reset = 0; |
| x86_platform.legacy.reserve_bios_regions = 0; |
| x86_platform.legacy.devices.pnpbios = 0; |
| } |
| |
| static inline u64 hv_vtl_system_desc_base(struct ldttss_desc *desc) |
| { |
| return ((u64)desc->base3 << 32) | ((u64)desc->base2 << 24) | |
| (desc->base1 << 16) | desc->base0; |
| } |
| |
| static inline u32 hv_vtl_system_desc_limit(struct ldttss_desc *desc) |
| { |
| return ((u32)desc->limit1 << 16) | (u32)desc->limit0; |
| } |
| |
| typedef void (*secondary_startup_64_fn)(void*, void*); |
| static void hv_vtl_ap_entry(void) |
| { |
| ((secondary_startup_64_fn)secondary_startup_64)(&boot_params, &boot_params); |
| } |
| |
| static int hv_vtl_bringup_vcpu(u32 target_vp_index, u64 eip_ignored) |
| { |
| u64 status; |
| int ret = 0; |
| struct hv_enable_vp_vtl *input; |
| unsigned long irq_flags; |
| |
| struct desc_ptr gdt_ptr; |
| struct desc_ptr idt_ptr; |
| |
| struct ldttss_desc *tss; |
| struct ldttss_desc *ldt; |
| struct desc_struct *gdt; |
| |
| u64 rsp = current->thread.sp; |
| u64 rip = (u64)&hv_vtl_ap_entry; |
| |
| native_store_gdt(&gdt_ptr); |
| store_idt(&idt_ptr); |
| |
| gdt = (struct desc_struct *)((void *)(gdt_ptr.address)); |
| tss = (struct ldttss_desc *)(gdt + GDT_ENTRY_TSS); |
| ldt = (struct ldttss_desc *)(gdt + GDT_ENTRY_LDT); |
| |
| local_irq_save(irq_flags); |
| |
| input = *this_cpu_ptr(hyperv_pcpu_input_arg); |
| memset(input, 0, sizeof(*input)); |
| |
| input->partition_id = HV_PARTITION_ID_SELF; |
| input->vp_index = target_vp_index; |
| input->target_vtl.target_vtl = HV_VTL_MGMT; |
| |
| /* |
| * The x86_64 Linux kernel follows the 16-bit -> 32-bit -> 64-bit |
| * mode transition sequence after waking up an AP with SIPI whose |
| * vector points to the 16-bit AP startup trampoline code. Here in |
| * VTL2, we can't perform that sequence as the AP has to start in |
| * the 64-bit mode. |
| * |
| * To make this happen, we tell the hypervisor to load a valid 64-bit |
| * context (most of which is just magic numbers from the CPU manual) |
| * so that AP jumps right to the 64-bit entry of the kernel, and the |
| * control registers are loaded with values that let the AP fetch the |
| * code and data and carry on with work it gets assigned. |
| */ |
| |
| input->vp_context.rip = rip; |
| input->vp_context.rsp = rsp; |
| input->vp_context.rflags = 0x0000000000000002; |
| input->vp_context.efer = __rdmsr(MSR_EFER); |
| input->vp_context.cr0 = native_read_cr0(); |
| input->vp_context.cr3 = __native_read_cr3(); |
| input->vp_context.cr4 = native_read_cr4(); |
| input->vp_context.msr_cr_pat = __rdmsr(MSR_IA32_CR_PAT); |
| input->vp_context.idtr.limit = idt_ptr.size; |
| input->vp_context.idtr.base = idt_ptr.address; |
| input->vp_context.gdtr.limit = gdt_ptr.size; |
| input->vp_context.gdtr.base = gdt_ptr.address; |
| |
| /* Non-system desc (64bit), long, code, present */ |
| input->vp_context.cs.selector = __KERNEL_CS; |
| input->vp_context.cs.base = 0; |
| input->vp_context.cs.limit = 0xffffffff; |
| input->vp_context.cs.attributes = 0xa09b; |
| /* Non-system desc (64bit), data, present, granularity, default */ |
| input->vp_context.ss.selector = __KERNEL_DS; |
| input->vp_context.ss.base = 0; |
| input->vp_context.ss.limit = 0xffffffff; |
| input->vp_context.ss.attributes = 0xc093; |
| |
| /* System desc (128bit), present, LDT */ |
| input->vp_context.ldtr.selector = GDT_ENTRY_LDT * 8; |
| input->vp_context.ldtr.base = hv_vtl_system_desc_base(ldt); |
| input->vp_context.ldtr.limit = hv_vtl_system_desc_limit(ldt); |
| input->vp_context.ldtr.attributes = 0x82; |
| |
| /* System desc (128bit), present, TSS, 0x8b - busy, 0x89 -- default */ |
| input->vp_context.tr.selector = GDT_ENTRY_TSS * 8; |
| input->vp_context.tr.base = hv_vtl_system_desc_base(tss); |
| input->vp_context.tr.limit = hv_vtl_system_desc_limit(tss); |
| input->vp_context.tr.attributes = 0x8b; |
| |
| status = hv_do_hypercall(HVCALL_ENABLE_VP_VTL, input, NULL); |
| |
| if (!hv_result_success(status) && |
| hv_result(status) != HV_STATUS_VTL_ALREADY_ENABLED) { |
| pr_err("HVCALL_ENABLE_VP_VTL failed for VP : %d ! [Err: %#llx\n]", |
| target_vp_index, status); |
| ret = -EINVAL; |
| goto free_lock; |
| } |
| |
| status = hv_do_hypercall(HVCALL_START_VP, input, NULL); |
| |
| if (!hv_result_success(status)) { |
| pr_err("HVCALL_START_VP failed for VP : %d ! [Err: %#llx]\n", |
| target_vp_index, status); |
| ret = -EINVAL; |
| } |
| |
| free_lock: |
| local_irq_restore(irq_flags); |
| |
| return ret; |
| } |
| |
| static int hv_vtl_apicid_to_vp_id(u32 apic_id) |
| { |
| u64 control; |
| u64 status; |
| unsigned long irq_flags; |
| struct hv_get_vp_from_apic_id_in *input; |
| u32 *output, ret; |
| |
| local_irq_save(irq_flags); |
| |
| input = *this_cpu_ptr(hyperv_pcpu_input_arg); |
| memset(input, 0, sizeof(*input)); |
| input->partition_id = HV_PARTITION_ID_SELF; |
| input->apic_ids[0] = apic_id; |
| |
| output = (u32 *)input; |
| |
| control = HV_HYPERCALL_REP_COMP_1 | HVCALL_GET_VP_ID_FROM_APIC_ID; |
| status = hv_do_hypercall(control, input, output); |
| ret = output[0]; |
| |
| local_irq_restore(irq_flags); |
| |
| if (!hv_result_success(status)) { |
| pr_err("failed to get vp id from apic id %d, status %#llx\n", |
| apic_id, status); |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int hv_vtl_wakeup_secondary_cpu(u32 apicid, unsigned long start_eip) |
| { |
| int vp_id; |
| |
| pr_debug("Bringing up CPU with APIC ID %d in VTL2...\n", apicid); |
| vp_id = hv_vtl_apicid_to_vp_id(apicid); |
| |
| if (vp_id < 0) { |
| pr_err("Couldn't find CPU with APIC ID %d\n", apicid); |
| return -EINVAL; |
| } |
| if (vp_id > ms_hyperv.max_vp_index) { |
| pr_err("Invalid CPU id %d for APIC ID %d\n", vp_id, apicid); |
| return -EINVAL; |
| } |
| |
| return hv_vtl_bringup_vcpu(vp_id, start_eip); |
| } |
| |
| int __init hv_vtl_early_init(void) |
| { |
| /* |
| * `boot_cpu_has` returns the runtime feature support, |
| * and here is the earliest it can be used. |
| */ |
| if (cpu_feature_enabled(X86_FEATURE_XSAVE)) |
| panic("XSAVE has to be disabled as it is not supported by this module.\n" |
| "Please add 'noxsave' to the kernel command line.\n"); |
| |
| real_mode_header = &hv_vtl_real_mode_header; |
| apic_update_callback(wakeup_secondary_cpu_64, hv_vtl_wakeup_secondary_cpu); |
| |
| return 0; |
| } |