| /* |
| * Toshiba rbtx4927 specific setup |
| * |
| * Author: MontaVista Software, Inc. |
| * source@mvista.com |
| * |
| * Copyright 2001-2002 MontaVista Software Inc. |
| * |
| * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 2000 RidgeRun, Inc. |
| * Author: RidgeRun, Inc. |
| * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: jsun@mvista.com or jsun@junsun.net |
| * |
| * Copyright 2002 MontaVista Software Inc. |
| * Author: Michael Pruznick, michael_pruznick@mvista.com |
| * |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * |
| * Copyright (C) 2004 MontaVista Software Inc. |
| * Author: Manish Lachwani, mlachwani@mvista.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
| * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/swap.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/timex.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/bootinfo.h> |
| #include <asm/page.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/irq_regs.h> |
| #include <asm/processor.h> |
| #include <asm/reboot.h> |
| #include <asm/time.h> |
| #include <linux/bootmem.h> |
| #include <linux/blkdev.h> |
| #ifdef CONFIG_TOSHIBA_FPCIB0 |
| #include <asm/tx4927/smsc_fdc37m81x.h> |
| #endif |
| #include <asm/tx4927/toshiba_rbtx4927.h> |
| #ifdef CONFIG_PCI |
| #include <asm/tx4927/tx4927_pci.h> |
| #endif |
| #ifdef CONFIG_BLK_DEV_IDEPCI |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #endif |
| #ifdef CONFIG_SERIAL_TXX9 |
| #include <linux/tty.h> |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #endif |
| |
| #undef TOSHIBA_RBTX4927_SETUP_DEBUG |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| #define TOSHIBA_RBTX4927_SETUP_NONE 0x00000000 |
| |
| #define TOSHIBA_RBTX4927_SETUP_INFO ( 1 << 0 ) |
| #define TOSHIBA_RBTX4927_SETUP_WARN ( 1 << 1 ) |
| #define TOSHIBA_RBTX4927_SETUP_EROR ( 1 << 2 ) |
| |
| #define TOSHIBA_RBTX4927_SETUP_EFWFU ( 1 << 3 ) |
| #define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 ) |
| #define TOSHIBA_RBTX4927_SETUP_TIME_INIT ( 1 << 5 ) |
| #define TOSHIBA_RBTX4927_SETUP_TIMER_SETUP ( 1 << 6 ) |
| #define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 ) |
| #define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 ) |
| #define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 ) |
| #define TOSHIBA_RBTX4927_SETUP_PCI66 ( 1 << 10 ) |
| |
| #define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff |
| #endif |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| static const u32 toshiba_rbtx4927_setup_debug_flag = |
| (TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO | |
| TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR | |
| TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP | |
| TOSHIBA_RBTX4927_SETUP_TIME_INIT | TOSHIBA_RBTX4927_SETUP_TIMER_SETUP |
| | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 | |
| TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66); |
| #endif |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| #define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \ |
| if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \ |
| { \ |
| char tmp[100]; \ |
| sprintf( tmp, str ); \ |
| printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \ |
| } |
| #else |
| #define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...) |
| #endif |
| |
| /* These functions are used for rebooting or halting the machine*/ |
| extern void toshiba_rbtx4927_restart(char *command); |
| extern void toshiba_rbtx4927_halt(void); |
| extern void toshiba_rbtx4927_power_off(void); |
| |
| int tx4927_using_backplane = 0; |
| |
| extern void gt64120_time_init(void); |
| extern void toshiba_rbtx4927_irq_setup(void); |
| |
| char *prom_getcmdline(void); |
| |
| #ifdef CONFIG_PCI |
| #undef TX4927_SUPPORT_COMMAND_IO |
| #undef TX4927_SUPPORT_PCI_66 |
| int tx4927_cpu_clock = 100000000; /* 100MHz */ |
| unsigned long mips_pci_io_base; |
| unsigned long mips_pci_io_size; |
| unsigned long mips_pci_mem_base; |
| unsigned long mips_pci_mem_size; |
| /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ |
| unsigned long mips_pci_io_pciaddr = 0; |
| unsigned long mips_memory_upper; |
| static int tx4927_ccfg_toeon = 1; |
| static int tx4927_pcic_trdyto = 0; /* default: disabled */ |
| unsigned long tx4927_ce_base[8]; |
| void tx4927_reset_pci_pcic(void); |
| int tx4927_pci66 = 0; /* 0:auto */ |
| #endif |
| |
| char *toshiba_name = ""; |
| |
| #ifdef CONFIG_PCI |
| extern struct pci_controller tx4927_controller; |
| |
| static struct pci_dev *fake_pci_dev(struct pci_controller *hose, |
| int top_bus, int busnr, int devfn) |
| { |
| static struct pci_dev dev; |
| static struct pci_bus bus; |
| |
| dev.sysdata = (void *)hose; |
| dev.devfn = devfn; |
| bus.number = busnr; |
| bus.ops = hose->pci_ops; |
| bus.parent = NULL; |
| dev.bus = &bus; |
| |
| return &dev; |
| } |
| |
| #define EARLY_PCI_OP(rw, size, type) \ |
| static int early_##rw##_config_##size(struct pci_controller *hose, \ |
| int top_bus, int bus, int devfn, int offset, type value) \ |
| { \ |
| return pci_##rw##_config_##size( \ |
| fake_pci_dev(hose, top_bus, bus, devfn), \ |
| offset, value); \ |
| } |
| |
| EARLY_PCI_OP(read, byte, u8 *) |
| EARLY_PCI_OP(read, dword, u32 *) |
| EARLY_PCI_OP(write, byte, u8) |
| EARLY_PCI_OP(write, dword, u32) |
| |
| static int __init tx4927_pcibios_init(void) |
| { |
| unsigned int id; |
| u32 pci_devfn; |
| int devfn_start = 0; |
| int devfn_stop = 0xff; |
| int busno = 0; /* One bus on the Toshiba */ |
| struct pci_controller *hose = &tx4927_controller; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| "-\n"); |
| |
| for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { |
| early_read_config_dword(hose, busno, busno, pci_devfn, |
| PCI_VENDOR_ID, &id); |
| |
| if (id == 0xffffffff) { |
| continue; |
| } |
| |
| if (id == 0x94601055) { |
| u8 v08_64; |
| u32 v32_b0; |
| u8 v08_e1; |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| char *s = " sb/isa --"; |
| #endif |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", |
| s); |
| |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x64, &v08_64); |
| early_read_config_dword(hose, busno, busno, |
| pci_devfn, 0xb0, &v32_b0); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0xe1, &v08_e1); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x64 = 0x%02x\n", s, v08_64); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0xb0 = 0x%02x\n", s, v32_b0); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0xe1 = 0x%02x\n", s, v08_e1); |
| |
| /* serial irq control */ |
| v08_64 = 0xd0; |
| |
| /* serial irq pin */ |
| v32_b0 |= 0x00010000; |
| |
| /* ide irq on isa14 */ |
| v08_e1 &= 0xf0; |
| v08_e1 |= 0x0d; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x64 = 0x%02x\n", s, v08_64); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0xb0 = 0x%02x\n", s, v32_b0); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0xe1 = 0x%02x\n", s, v08_e1); |
| |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x64, v08_64); |
| early_write_config_dword(hose, busno, busno, |
| pci_devfn, 0xb0, v32_b0); |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0xe1, v08_e1); |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| { |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x64, |
| &v08_64); |
| early_read_config_dword(hose, busno, busno, |
| pci_devfn, 0xb0, |
| &v32_b0); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0xe1, |
| &v08_e1); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x64 = 0x%02x\n", s, v08_64); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0xb0 = 0x%02x\n", s, v32_b0); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0xe1 = 0x%02x\n", s, v08_e1); |
| } |
| #endif |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", |
| s); |
| } |
| |
| if (id == 0x91301055) { |
| u8 v08_04; |
| u8 v08_09; |
| u8 v08_41; |
| u8 v08_43; |
| u8 v08_5c; |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| char *s = " sb/ide --"; |
| #endif |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", |
| s); |
| |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x04, &v08_04); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x09, &v08_09); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x41, &v08_41); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x43, &v08_43); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x5c, &v08_5c); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x04 = 0x%02x\n", s, v08_04); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x09 = 0x%02x\n", s, v08_09); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x41 = 0x%02x\n", s, v08_41); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x43 = 0x%02x\n", s, v08_43); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s beg 0x5c = 0x%02x\n", s, v08_5c); |
| |
| /* enable ide master/io */ |
| v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); |
| |
| /* enable ide native mode */ |
| v08_09 |= 0x05; |
| |
| /* enable primary ide */ |
| v08_41 |= 0x80; |
| |
| /* enable secondary ide */ |
| v08_43 |= 0x80; |
| |
| /* |
| * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! |
| * |
| * This line of code is intended to provide the user with a work |
| * around solution to the anomalies cited in SMSC's anomaly sheet |
| * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". |
| * |
| * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! |
| */ |
| v08_5c |= 0x01; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x04 = 0x%02x\n", s, v08_04); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x09 = 0x%02x\n", s, v08_09); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x41 = 0x%02x\n", s, v08_41); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x43 = 0x%02x\n", s, v08_43); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s mid 0x5c = 0x%02x\n", s, v08_5c); |
| |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x5c, v08_5c); |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x04, v08_04); |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x09, v08_09); |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x41, v08_41); |
| early_write_config_byte(hose, busno, busno, |
| pci_devfn, 0x43, v08_43); |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| { |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x04, |
| &v08_04); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x09, |
| &v08_09); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x41, |
| &v08_41); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x43, |
| &v08_43); |
| early_read_config_byte(hose, busno, busno, |
| pci_devfn, 0x5c, |
| &v08_5c); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x04 = 0x%02x\n", s, v08_04); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x09 = 0x%02x\n", s, v08_09); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x41 = 0x%02x\n", s, v08_41); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x43 = 0x%02x\n", s, v08_43); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| ":%s end 0x5c = 0x%02x\n", s, v08_5c); |
| } |
| #endif |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", |
| s); |
| } |
| |
| } |
| |
| register_pci_controller(&tx4927_controller); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, |
| "+\n"); |
| |
| return 0; |
| } |
| |
| arch_initcall(tx4927_pcibios_init); |
| |
| extern struct resource pci_io_resource; |
| extern struct resource pci_mem_resource; |
| |
| void __init tx4927_pci_setup(void) |
| { |
| static int called = 0; |
| extern unsigned int tx4927_get_mem_size(void); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n"); |
| |
| mips_memory_upper = tx4927_get_mem_size() << 20; |
| mips_memory_upper += KSEG0; |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_memory_upper\n", |
| mips_memory_upper); |
| mips_pci_io_base = TX4927_PCIIO; |
| mips_pci_io_size = TX4927_PCIIO_SIZE; |
| mips_pci_mem_base = TX4927_PCIMEM; |
| mips_pci_mem_size = TX4927_PCIMEM_SIZE; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_pci_io_base\n", |
| mips_pci_io_base); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_pci_io_size\n", |
| mips_pci_io_size); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_pci_mem_base\n", |
| mips_pci_mem_base); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_pci_mem_size\n", |
| mips_pci_mem_size); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=pci_io_resource.start\n", |
| pci_io_resource.start); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=pci_io_resource.end\n", |
| pci_io_resource.end); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=pci_mem_resource.start\n", |
| pci_mem_resource.start); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=pci_mem_resource.end\n", |
| pci_mem_resource.end); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| "0x%08lx=mips_io_port_base", |
| mips_io_port_base); |
| if (!called) { |
| printk |
| ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", |
| toshiba_name, |
| (unsigned short) (tx4927_pcicptr->pciid >> 16), |
| (unsigned short) (tx4927_pcicptr->pciid & 0xffff), |
| (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), |
| (!(tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCIXARB)) ? "External" : |
| "Internal"); |
| called = 1; |
| } |
| printk("%s PCIC --%s PCICLK:", toshiba_name, |
| (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); |
| if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { |
| int pciclk = 0; |
| if (mips_machtype == MACH_TOSHIBA_RBTX4937) |
| switch ((unsigned long) tx4927_ccfgptr-> |
| ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { |
| case TX4937_CCFG_PCIDIVMODE_4: |
| pciclk = tx4927_cpu_clock / 4; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_4_5: |
| pciclk = tx4927_cpu_clock * 2 / 9; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_5: |
| pciclk = tx4927_cpu_clock / 5; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_5_5: |
| pciclk = tx4927_cpu_clock * 2 / 11; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_8: |
| pciclk = tx4927_cpu_clock / 8; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_9: |
| pciclk = tx4927_cpu_clock / 9; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_10: |
| pciclk = tx4927_cpu_clock / 10; |
| break; |
| case TX4937_CCFG_PCIDIVMODE_11: |
| pciclk = tx4927_cpu_clock / 11; |
| break; |
| } |
| |
| else |
| switch ((unsigned long) tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { |
| case TX4927_CCFG_PCIDIVMODE_2_5: |
| pciclk = tx4927_cpu_clock * 2 / 5; |
| break; |
| case TX4927_CCFG_PCIDIVMODE_3: |
| pciclk = tx4927_cpu_clock / 3; |
| break; |
| case TX4927_CCFG_PCIDIVMODE_5: |
| pciclk = tx4927_cpu_clock / 5; |
| break; |
| case TX4927_CCFG_PCIDIVMODE_6: |
| pciclk = tx4927_cpu_clock / 6; |
| break; |
| } |
| |
| printk("Internal(%dMHz)", pciclk / 1000000); |
| } else { |
| int pciclk = 0; |
| int pciclk_setting = *tx4927_pci_clk_ptr; |
| switch (pciclk_setting & TX4927_PCI_CLK_MASK) { |
| case TX4927_PCI_CLK_33: |
| pciclk = 33333333; |
| break; |
| case TX4927_PCI_CLK_25: |
| pciclk = 25000000; |
| break; |
| case TX4927_PCI_CLK_66: |
| pciclk = 66666666; |
| break; |
| case TX4927_PCI_CLK_50: |
| pciclk = 50000000; |
| break; |
| } |
| printk("External(%dMHz)", pciclk / 1000000); |
| } |
| printk("\n"); |
| |
| |
| |
| /* GB->PCI mappings */ |
| tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; |
| tx4927_pcicptr->g2piogbase = mips_pci_io_base | |
| #ifdef __BIG_ENDIAN |
| TX4927_PCIC_G2PIOGBASE_ECHG |
| #else |
| TX4927_PCIC_G2PIOGBASE_BSDIS |
| #endif |
| ; |
| |
| tx4927_pcicptr->g2piopbase = 0; |
| |
| tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; |
| tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | |
| #ifdef __BIG_ENDIAN |
| TX4927_PCIC_G2PMnGBASE_ECHG |
| #else |
| TX4927_PCIC_G2PMnGBASE_BSDIS |
| #endif |
| ; |
| tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; |
| |
| tx4927_pcicptr->g2pmmask[1] = 0; |
| tx4927_pcicptr->g2pmgbase[1] = 0; |
| tx4927_pcicptr->g2pmpbase[1] = 0; |
| tx4927_pcicptr->g2pmmask[2] = 0; |
| tx4927_pcicptr->g2pmgbase[2] = 0; |
| tx4927_pcicptr->g2pmpbase[2] = 0; |
| |
| |
| /* PCI->GB mappings (I/O 256B) */ |
| tx4927_pcicptr->p2giopbase = 0; /* 256B */ |
| |
| /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ |
| tx4927_pcicptr->p2gm0plbase = 0; |
| tx4927_pcicptr->p2gm0pubase = 0; |
| tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | |
| #ifdef __BIG_ENDIAN |
| TX4927_PCIC_P2GMnGBASE_TECHG |
| #else |
| TX4927_PCIC_P2GMnGBASE_TBSDIS |
| #endif |
| ; |
| |
| /* PCI->GB mappings (MEM 16MB) -not used */ |
| tx4927_pcicptr->p2gm1plbase = 0xffffffff; |
| tx4927_pcicptr->p2gm1pubase = 0xffffffff; |
| tx4927_pcicptr->p2gmgbase[1] = 0; |
| |
| /* PCI->GB mappings (MEM 1MB) -not used */ |
| tx4927_pcicptr->p2gm2pbase = 0xffffffff; |
| tx4927_pcicptr->p2gmgbase[2] = 0; |
| |
| |
| /* Enable Initiator Memory 0 Space, I/O Space, Config */ |
| tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; |
| tx4927_pcicptr->pciccfg |= |
| TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | |
| TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; |
| |
| |
| /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ |
| tx4927_pcicptr->pcicfg1 = 0; |
| |
| if (tx4927_pcic_trdyto >= 0) { |
| tx4927_pcicptr->g2ptocnt &= ~0xff; |
| tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); |
| } |
| |
| /* Clear All Local Bus Status */ |
| tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; |
| /* Enable All Local Bus Interrupts */ |
| tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; |
| /* Clear All Initiator Status */ |
| tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; |
| /* Enable All Initiator Interrupts */ |
| tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; |
| /* Clear All PCI Status Error */ |
| tx4927_pcicptr->pcistatus = |
| (tx4927_pcicptr->pcistatus & 0x0000ffff) | |
| (TX4927_PCIC_PCISTATUS_ALL << 16); |
| /* Enable All PCI Status Error Interrupts */ |
| tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; |
| |
| /* PCIC Int => IRC IRQ16 */ |
| tx4927_pcicptr->pcicfg2 = |
| (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; |
| |
| if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { |
| /* XXX */ |
| } else { |
| /* Reset Bus Arbiter */ |
| tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; |
| /* Enable Bus Arbiter */ |
| tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; |
| } |
| |
| tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | |
| PCI_COMMAND_MEMORY | |
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, |
| ":pci setup complete:\n"); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n"); |
| } |
| |
| #endif /* CONFIG_PCI */ |
| |
| static void __noreturn wait_forever(void) |
| { |
| while (1) |
| if (cpu_wait) |
| (*cpu_wait)(); |
| } |
| |
| void toshiba_rbtx4927_restart(char *command) |
| { |
| printk(KERN_NOTICE "System Rebooting...\n"); |
| |
| /* enable the s/w reset register */ |
| writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE); |
| |
| /* wait for enable to be seen */ |
| while ((readb(RBTX4927_SW_RESET_ENABLE) & |
| RBTX4927_SW_RESET_ENABLE_SET) == 0x00); |
| |
| /* do a s/w reset */ |
| writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO); |
| |
| /* do something passive while waiting for reset */ |
| local_irq_disable(); |
| wait_forever(); |
| /* no return */ |
| } |
| |
| |
| void toshiba_rbtx4927_halt(void) |
| { |
| printk(KERN_NOTICE "System Halted\n"); |
| local_irq_disable(); |
| wait_forever(); |
| /* no return */ |
| } |
| |
| void toshiba_rbtx4927_power_off(void) |
| { |
| toshiba_rbtx4927_halt(); |
| /* no return */ |
| } |
| |
| void __init toshiba_rbtx4927_setup(void) |
| { |
| u32 cp0_config; |
| char *argptr; |
| |
| printk("CPU is %s\n", toshiba_name); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| "-\n"); |
| |
| /* f/w leaves this on at startup */ |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":Clearing STO_ERL.\n"); |
| clear_c0_status(ST0_ERL); |
| |
| /* enable caches -- HCP5 does this, pmon does not */ |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n"); |
| cp0_config = read_c0_config(); |
| cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); |
| write_c0_config(cp0_config); |
| |
| #ifdef TOSHIBA_RBTX4927_SETUP_DEBUG |
| { |
| extern void dump_cp0(char *); |
| dump_cp0("toshiba_rbtx4927_early_fw_fixup"); |
| } |
| #endif |
| |
| set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":mips_io_port_base=0x%08lx\n", |
| mips_io_port_base); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":Resource\n"); |
| ioport_resource.end = 0xffffffff; |
| iomem_resource.end = 0xffffffff; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":ResetRoutines\n"); |
| _machine_restart = toshiba_rbtx4927_restart; |
| _machine_halt = toshiba_rbtx4927_halt; |
| pm_power_off = toshiba_rbtx4927_power_off; |
| |
| #ifdef CONFIG_PCI |
| |
| /* PCIC */ |
| /* |
| * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. |
| * |
| * For TX4927: |
| * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). |
| * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) |
| * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) |
| * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) |
| * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) |
| * i.e. S9[3]: ON (83MHz), OFF (100MHz) |
| * |
| * For TX4937: |
| * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) |
| * PCIDIVMODE[10] is 0. |
| * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) |
| * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) |
| * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) |
| * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) |
| * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) |
| * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) |
| * |
| */ |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, |
| "ccfg is %lx, PCIDIVMODE is %x\n", |
| (unsigned long) tx4927_ccfgptr->ccfg, |
| (unsigned long) tx4927_ccfgptr->ccfg & |
| (mips_machtype == MACH_TOSHIBA_RBTX4937 ? |
| TX4937_CCFG_PCIDIVMODE_MASK : |
| TX4927_CCFG_PCIDIVMODE_MASK)); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, |
| "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n", |
| (unsigned long) tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCI66, |
| (unsigned long) tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCIMIDE, |
| (unsigned long) tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCIXARB); |
| |
| if (mips_machtype == MACH_TOSHIBA_RBTX4937) |
| switch ((unsigned long)tx4927_ccfgptr-> |
| ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { |
| case TX4937_CCFG_PCIDIVMODE_8: |
| case TX4937_CCFG_PCIDIVMODE_4: |
| tx4927_cpu_clock = 266666666; /* 266MHz */ |
| break; |
| case TX4937_CCFG_PCIDIVMODE_9: |
| case TX4937_CCFG_PCIDIVMODE_4_5: |
| tx4927_cpu_clock = 300000000; /* 300MHz */ |
| break; |
| default: |
| tx4927_cpu_clock = 333333333; /* 333MHz */ |
| } |
| else |
| switch ((unsigned long)tx4927_ccfgptr-> |
| ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { |
| case TX4927_CCFG_PCIDIVMODE_2_5: |
| case TX4927_CCFG_PCIDIVMODE_5: |
| tx4927_cpu_clock = 166666666; /* 166MHz */ |
| break; |
| default: |
| tx4927_cpu_clock = 200000000; /* 200MHz */ |
| } |
| |
| /* CCFG */ |
| /* enable Timeout BusError */ |
| if (tx4927_ccfg_toeon) |
| tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; |
| |
| tx4927_pci_setup(); |
| if (tx4927_using_backplane == 1) |
| printk("backplane board IS installed\n"); |
| else |
| printk("No Backplane \n"); |
| |
| /* this is on ISA bus behind PCI bus, so need PCI up first */ |
| #ifdef CONFIG_TOSHIBA_FPCIB0 |
| { |
| if (tx4927_using_backplane) { |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":fpcibo=yes\n"); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":smsc_fdc37m81x_init()\n"); |
| smsc_fdc37m81x_init(0x3f0); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":smsc_fdc37m81x_config_beg()\n"); |
| smsc_fdc37m81x_config_beg(); |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":smsc_fdc37m81x_config_set(KBD)\n"); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, |
| SMSC_FDC37M81X_KBD); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); |
| smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, |
| 1); |
| |
| smsc_fdc37m81x_config_end(); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":smsc_fdc37m81x_config_end()\n"); |
| } else { |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, |
| ":fpcibo=not_found\n"); |
| } |
| } |
| #else |
| { |
| TOSHIBA_RBTX4927_SETUP_DPRINTK |
| (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n"); |
| } |
| #endif |
| |
| #endif /* CONFIG_PCI */ |
| |
| #ifdef CONFIG_SERIAL_TXX9 |
| { |
| extern int early_serial_txx9_setup(struct uart_port *port); |
| int i; |
| struct uart_port req; |
| for(i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (char *)(0xff1ff300 + i * 0x100); |
| req.mapbase = 0xff1ff300 + i * 0x100; |
| req.irq = TX4927_IRQ_PIC_BEG + 8 + i; |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = 50000000; |
| early_serial_txx9_setup(&req); |
| } |
| } |
| #ifdef CONFIG_SERIAL_TXX9_CONSOLE |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "console=") == NULL) { |
| strcat(argptr, " console=ttyS0,38400"); |
| } |
| #endif |
| #endif |
| |
| #ifdef CONFIG_ROOT_NFS |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "root=") == NULL) { |
| strcat(argptr, " root=/dev/nfs rw"); |
| } |
| #endif |
| |
| |
| #ifdef CONFIG_IP_PNP |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "ip=") == NULL) { |
| strcat(argptr, " ip=any"); |
| } |
| #endif |
| |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, |
| "+\n"); |
| } |
| |
| void __init |
| toshiba_rbtx4927_time_init(void) |
| { |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "-\n"); |
| |
| mips_hpt_frequency = tx4927_cpu_clock / 2; |
| |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "+\n"); |
| |
| } |
| |
| void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq) |
| { |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP, |
| "-\n"); |
| TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP, |
| "+\n"); |
| } |
| |
| static int __init toshiba_rbtx4927_rtc_init(void) |
| { |
| static struct resource __initdata res = { |
| .start = 0x1c010000, |
| .end = 0x1c010000 + 0x800 - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("rtc-ds1742", -1, &res, 1); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| device_initcall(toshiba_rbtx4927_rtc_init); |
| |
| static int __init rbtx4927_ne_init(void) |
| { |
| static struct resource __initdata res[] = { |
| { |
| .start = RBTX4927_RTL_8019_BASE, |
| .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, |
| .flags = IORESOURCE_IO, |
| }, { |
| .start = RBTX4927_RTL_8019_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| struct platform_device *dev = |
| platform_device_register_simple("ne", -1, |
| res, ARRAY_SIZE(res)); |
| return IS_ERR(dev) ? PTR_ERR(dev) : 0; |
| } |
| device_initcall(rbtx4927_ne_init); |