| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform |
| * (derived from bytcr_rt5640.c) |
| * |
| * Copyright (C) 2015 Intel Corp |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/dmi.h> |
| #include <linux/input.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio/machine.h> |
| #include <linux/slab.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/jack.h> |
| #include <sound/soc-acpi.h> |
| #include "../../codecs/rt5651.h" |
| #include "../atom/sst-atom-controls.h" |
| #include "../common/soc-intel-quirks.h" |
| |
| enum { |
| BYT_RT5651_DMIC_MAP, |
| BYT_RT5651_IN1_MAP, |
| BYT_RT5651_IN2_MAP, |
| BYT_RT5651_IN1_IN2_MAP, |
| }; |
| |
| enum { |
| BYT_RT5651_JD_NULL = (RT5651_JD_NULL << 4), |
| BYT_RT5651_JD1_1 = (RT5651_JD1_1 << 4), |
| BYT_RT5651_JD1_2 = (RT5651_JD1_2 << 4), |
| BYT_RT5651_JD2 = (RT5651_JD2 << 4), |
| }; |
| |
| enum { |
| BYT_RT5651_OVCD_TH_600UA = (6 << 8), |
| BYT_RT5651_OVCD_TH_1500UA = (15 << 8), |
| BYT_RT5651_OVCD_TH_2000UA = (20 << 8), |
| }; |
| |
| enum { |
| BYT_RT5651_OVCD_SF_0P5 = (RT5651_OVCD_SF_0P5 << 13), |
| BYT_RT5651_OVCD_SF_0P75 = (RT5651_OVCD_SF_0P75 << 13), |
| BYT_RT5651_OVCD_SF_1P0 = (RT5651_OVCD_SF_1P0 << 13), |
| BYT_RT5651_OVCD_SF_1P5 = (RT5651_OVCD_SF_1P5 << 13), |
| }; |
| |
| #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(3, 0)) |
| #define BYT_RT5651_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4) |
| #define BYT_RT5651_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8) |
| #define BYT_RT5651_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13) |
| #define BYT_RT5651_DMIC_EN BIT(16) |
| #define BYT_RT5651_MCLK_EN BIT(17) |
| #define BYT_RT5651_MCLK_25MHZ BIT(18) |
| #define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */ |
| #define BYT_RT5651_SSP0_AIF1 BIT(20) |
| #define BYT_RT5651_SSP0_AIF2 BIT(21) |
| #define BYT_RT5651_HP_LR_SWAPPED BIT(22) |
| #define BYT_RT5651_MONO_SPEAKER BIT(23) |
| #define BYT_RT5651_JD_NOT_INV BIT(24) |
| |
| #define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ |
| BYT_RT5651_JD1_1 | \ |
| BYT_RT5651_OVCD_TH_2000UA | \ |
| BYT_RT5651_OVCD_SF_0P75) |
| |
| /* jack-detect-source + inv + dmic-en + ovcd-th + -sf + terminating entry */ |
| #define MAX_NO_PROPS 6 |
| |
| struct byt_rt5651_private { |
| struct clk *mclk; |
| struct gpio_desc *ext_amp_gpio; |
| struct gpio_desc *hp_detect; |
| struct snd_soc_jack jack; |
| struct device *codec_dev; |
| }; |
| |
| static const struct acpi_gpio_mapping *byt_rt5651_gpios; |
| |
| /* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ |
| static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP; |
| |
| static int quirk_override = -1; |
| module_param_named(quirk, quirk_override, int, 0444); |
| MODULE_PARM_DESC(quirk, "Board-specific quirk override"); |
| |
| static void log_quirks(struct device *dev) |
| { |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) |
| dev_info(dev, "quirk DMIC_MAP enabled"); |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) |
| dev_info(dev, "quirk IN1_MAP enabled"); |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) |
| dev_info(dev, "quirk IN2_MAP enabled"); |
| if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) |
| dev_info(dev, "quirk IN1_IN2_MAP enabled"); |
| if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { |
| dev_info(dev, "quirk realtek,jack-detect-source %ld\n", |
| BYT_RT5651_JDSRC(byt_rt5651_quirk)); |
| dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", |
| BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); |
| dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", |
| BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); |
| } |
| if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) |
| dev_info(dev, "quirk DMIC enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) |
| dev_info(dev, "quirk MCLK_EN enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) |
| dev_info(dev, "quirk MCLK_25MHZ enabled"); |
| if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) |
| dev_info(dev, "quirk SSP2_AIF2 enabled\n"); |
| if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) |
| dev_info(dev, "quirk SSP0_AIF1 enabled\n"); |
| if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) |
| dev_info(dev, "quirk SSP0_AIF2 enabled\n"); |
| if (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) |
| dev_info(dev, "quirk MONO_SPEAKER enabled\n"); |
| if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) |
| dev_info(dev, "quirk JD_NOT_INV enabled\n"); |
| } |
| |
| #define BYT_CODEC_DAI1 "rt5651-aif1" |
| #define BYT_CODEC_DAI2 "rt5651-aif2" |
| |
| static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, |
| int rate, int bclk_ratio) |
| { |
| int clk_id, clk_freq, ret; |
| |
| /* Configure the PLL before selecting it */ |
| if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { |
| clk_id = RT5651_PLL1_S_BCLK1; |
| clk_freq = rate * bclk_ratio; |
| } else { |
| clk_id = RT5651_PLL1_S_MCLK; |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) |
| clk_freq = 25000000; |
| else |
| clk_freq = 19200000; |
| } |
| ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, rate * 512); |
| if (ret < 0) { |
| dev_err(codec_dai->component->dev, "can't set pll: %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, |
| rate * 512, SND_SOC_CLOCK_IN); |
| if (ret < 0) { |
| dev_err(codec_dai->component->dev, "can't set clock %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int platform_clock_control(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| struct snd_soc_dapm_context *dapm = w->dapm; |
| struct snd_soc_card *card = dapm->card; |
| struct snd_soc_dai *codec_dai; |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| int ret; |
| |
| codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); |
| if (!codec_dai) |
| codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); |
| if (!codec_dai) { |
| dev_err(card->dev, |
| "Codec dai not found; Unable to set platform clock\n"); |
| return -EIO; |
| } |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) { |
| ret = clk_prepare_enable(priv->mclk); |
| if (ret < 0) { |
| dev_err(card->dev, "could not configure MCLK state"); |
| return ret; |
| } |
| ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50); |
| } else { |
| /* |
| * Set codec clock source to internal clock before |
| * turning off the platform clock. Codec needs clock |
| * for Jack detection and button press |
| */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, |
| 48000 * 512, |
| SND_SOC_CLOCK_IN); |
| if (!ret) |
| clk_disable_unprepare(priv->mclk); |
| } |
| |
| if (ret < 0) { |
| dev_err(card->dev, "can't set codec sysclk: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_card *card = w->dapm->card; |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) |
| gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); |
| else |
| gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Internal Mic", NULL), |
| SND_SOC_DAPM_SPK("Speaker", NULL), |
| SND_SOC_DAPM_LINE("Line In", NULL), |
| SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, |
| platform_clock_control, SND_SOC_DAPM_PRE_PMU | |
| SND_SOC_DAPM_POST_PMD), |
| SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, |
| rt5651_ext_amp_power_event, |
| SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { |
| {"Headphone", NULL, "Platform Clock"}, |
| {"Headset Mic", NULL, "Platform Clock"}, |
| {"Internal Mic", NULL, "Platform Clock"}, |
| {"Speaker", NULL, "Platform Clock"}, |
| {"Speaker", NULL, "Ext Amp Power"}, |
| {"Line In", NULL, "Platform Clock"}, |
| |
| {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ |
| {"Headphone", NULL, "HPOL"}, |
| {"Headphone", NULL, "HPOR"}, |
| {"Speaker", NULL, "LOUTL"}, |
| {"Speaker", NULL, "LOUTR"}, |
| {"IN2P", NULL, "Line In"}, |
| {"IN2N", NULL, "Line In"}, |
| |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { |
| {"DMIC L1", NULL, "Internal Mic"}, |
| {"DMIC R1", NULL, "Internal Mic"}, |
| {"IN2P", NULL, "Headset Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { |
| {"Internal Mic", NULL, "micbias1"}, |
| {"IN1P", NULL, "Internal Mic"}, |
| {"IN3P", NULL, "Headset Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { |
| {"Internal Mic", NULL, "micbias1"}, |
| {"IN2P", NULL, "Internal Mic"}, |
| {"IN3P", NULL, "Headset Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { |
| {"Internal Mic", NULL, "micbias1"}, |
| {"IN1P", NULL, "Internal Mic"}, |
| {"IN2P", NULL, "Internal Mic"}, |
| {"IN3P", NULL, "Headset Mic"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { |
| {"ssp0 Tx", NULL, "modem_out"}, |
| {"modem_in", NULL, "ssp0 Rx"}, |
| |
| {"AIF1 Playback", NULL, "ssp0 Tx"}, |
| {"ssp0 Rx", NULL, "AIF1 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = { |
| {"ssp0 Tx", NULL, "modem_out"}, |
| {"modem_in", NULL, "ssp0 Rx"}, |
| |
| {"AIF2 Playback", NULL, "ssp0 Tx"}, |
| {"ssp0 Rx", NULL, "AIF2 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = { |
| {"ssp2 Tx", NULL, "codec_out0"}, |
| {"ssp2 Tx", NULL, "codec_out1"}, |
| {"codec_in0", NULL, "ssp2 Rx"}, |
| {"codec_in1", NULL, "ssp2 Rx"}, |
| |
| {"AIF1 Playback", NULL, "ssp2 Tx"}, |
| {"ssp2 Rx", NULL, "AIF1 Capture"}, |
| }; |
| |
| static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = { |
| {"ssp2 Tx", NULL, "codec_out0"}, |
| {"ssp2 Tx", NULL, "codec_out1"}, |
| {"codec_in0", NULL, "ssp2 Rx"}, |
| {"codec_in1", NULL, "ssp2 Rx"}, |
| |
| {"AIF2 Playback", NULL, "ssp2 Tx"}, |
| {"ssp2 Rx", NULL, "AIF2 Capture"}, |
| }; |
| |
| static const struct snd_kcontrol_new byt_rt5651_controls[] = { |
| SOC_DAPM_PIN_SWITCH("Headphone"), |
| SOC_DAPM_PIN_SWITCH("Headset Mic"), |
| SOC_DAPM_PIN_SWITCH("Internal Mic"), |
| SOC_DAPM_PIN_SWITCH("Speaker"), |
| SOC_DAPM_PIN_SWITCH("Line In"), |
| }; |
| |
| static struct snd_soc_jack_pin bytcr_jack_pins[] = { |
| { |
| .pin = "Headphone", |
| .mask = SND_JACK_HEADPHONE, |
| }, |
| { |
| .pin = "Headset Mic", |
| .mask = SND_JACK_MICROPHONE, |
| }, |
| }; |
| |
| static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); |
| struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); |
| snd_pcm_format_t format = params_format(params); |
| int rate = params_rate(params); |
| int bclk_ratio; |
| |
| if (format == SNDRV_PCM_FORMAT_S16_LE) |
| bclk_ratio = 32; |
| else |
| bclk_ratio = 50; |
| |
| return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio); |
| } |
| |
| static const struct acpi_gpio_params pov_p1006w_hp_detect = { 1, 0, false }; |
| static const struct acpi_gpio_params pov_p1006w_ext_amp_en = { 2, 0, true }; |
| |
| static const struct acpi_gpio_mapping byt_rt5651_pov_p1006w_gpios[] = { |
| { "hp-detect-gpios", &pov_p1006w_hp_detect, 1, }, |
| { "ext-amp-enable-gpios", &pov_p1006w_ext_amp_en, 1, }, |
| { }, |
| }; |
| |
| static int byt_rt5651_pov_p1006w_quirk_cb(const struct dmi_system_id *id) |
| { |
| byt_rt5651_quirk = (unsigned long)id->driver_data; |
| byt_rt5651_gpios = byt_rt5651_pov_p1006w_gpios; |
| return 1; |
| } |
| |
| static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) |
| { |
| byt_rt5651_quirk = (unsigned long)id->driver_data; |
| return 1; |
| } |
| |
| static const struct dmi_system_id byt_rt5651_quirk_table[] = { |
| { |
| /* Chuwi Hi8 Pro (CWI513) */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_HP_LR_SWAPPED | |
| BYT_RT5651_MONO_SPEAKER), |
| }, |
| { |
| /* Chuwi Vi8 Plus (CWI519) */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_HP_LR_SWAPPED | |
| BYT_RT5651_MONO_SPEAKER), |
| }, |
| { |
| /* Complet Electro Serv MY8307 */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Complet Electro Serv"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MY8307"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_MONO_SPEAKER | |
| BYT_RT5651_JD_NOT_INV), |
| }, |
| { |
| /* I.T.Works TW701, Ployer Momo7w and Trekstor ST70416-6 |
| * (these all use the same mainboard) */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), |
| /* Partial match for all of itWORKS.G.WI71C.JGBMRBA, |
| * TREK.G.WI71C.JGBMRBA0x and MOMO.G.WI71C.MABMRBA02 */ |
| DMI_MATCH(DMI_BIOS_VERSION, ".G.WI71C."), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_SSP0_AIF1 | |
| BYT_RT5651_MONO_SPEAKER), |
| }, |
| { |
| /* Jumper EZpad 7 */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Jumper"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"), |
| /* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */ |
| DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_JD_NOT_INV), |
| }, |
| { |
| /* KIANO SlimNote 14.2 */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN1_IN2_MAP), |
| }, |
| { |
| /* Minnowboard Max B3 */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_IN1_MAP), |
| }, |
| { |
| /* Minnowboard Turbot */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ADI"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_MCLK_EN | |
| BYT_RT5651_IN1_MAP), |
| }, |
| { |
| /* Point of View mobii wintab p1006w (v1.0) */ |
| .callback = byt_rt5651_pov_p1006w_quirk_cb, |
| .matches = { |
| DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"), |
| /* Note 105b is Foxcon's USB/PCI vendor id */ |
| DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"), |
| DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DMIC_MAP | |
| BYT_RT5651_OVCD_TH_2000UA | |
| BYT_RT5651_OVCD_SF_0P75 | |
| BYT_RT5651_DMIC_EN | |
| BYT_RT5651_MCLK_EN | |
| BYT_RT5651_SSP0_AIF1), |
| }, |
| { |
| /* VIOS LTH17 */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), |
| }, |
| .driver_data = (void *)(BYT_RT5651_IN1_IN2_MAP | |
| BYT_RT5651_JD1_1 | |
| BYT_RT5651_OVCD_TH_2000UA | |
| BYT_RT5651_OVCD_SF_1P0 | |
| BYT_RT5651_MCLK_EN), |
| }, |
| { |
| /* Yours Y8W81 (and others using the same mainboard) */ |
| .callback = byt_rt5651_quirk_cb, |
| .matches = { |
| DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), |
| /* Partial match for all devs with a W86C mainboard */ |
| DMI_MATCH(DMI_BIOS_VERSION, ".F.W86C."), |
| }, |
| .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | |
| BYT_RT5651_IN2_MAP | |
| BYT_RT5651_SSP0_AIF1 | |
| BYT_RT5651_MONO_SPEAKER), |
| }, |
| {} |
| }; |
| |
| /* |
| * Note this MUST be called before snd_soc_register_card(), so that the props |
| * are in place before the codec component driver's probe function parses them. |
| */ |
| static int byt_rt5651_add_codec_device_props(struct device *i2c_dev, |
| struct byt_rt5651_private *priv) |
| { |
| struct property_entry props[MAX_NO_PROPS] = {}; |
| struct fwnode_handle *fwnode; |
| int cnt = 0; |
| int ret; |
| |
| props[cnt++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source", |
| BYT_RT5651_JDSRC(byt_rt5651_quirk)); |
| |
| props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-threshold-microamp", |
| BYT_RT5651_OVCD_TH(byt_rt5651_quirk) * 100); |
| |
| props[cnt++] = PROPERTY_ENTRY_U32("realtek,over-current-scale-factor", |
| BYT_RT5651_OVCD_SF(byt_rt5651_quirk)); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) |
| props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,dmic-en"); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_JD_NOT_INV) |
| props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); |
| |
| fwnode = fwnode_create_software_node(props, NULL); |
| if (IS_ERR(fwnode)) { |
| /* put_device(i2c_dev) is handled in caller */ |
| return PTR_ERR(fwnode); |
| } |
| |
| ret = device_add_software_node(i2c_dev, to_software_node(fwnode)); |
| |
| fwnode_handle_put(fwnode); |
| |
| return ret; |
| } |
| |
| static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) |
| { |
| struct snd_soc_card *card = runtime->card; |
| struct snd_soc_component *codec = asoc_rtd_to_codec(runtime, 0)->component; |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| const struct snd_soc_dapm_route *custom_map; |
| int num_routes; |
| int report; |
| int ret; |
| |
| card->dapm.idle_bias_off = true; |
| |
| /* Start with RC clk for jack-detect (we disable MCLK below) */ |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) |
| snd_soc_component_update_bits(codec, RT5651_GLB_CLK, |
| RT5651_SCLK_SRC_MASK, RT5651_SCLK_SRC_RCCLK); |
| |
| switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { |
| case BYT_RT5651_IN1_MAP: |
| custom_map = byt_rt5651_intmic_in1_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); |
| break; |
| case BYT_RT5651_IN2_MAP: |
| custom_map = byt_rt5651_intmic_in2_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); |
| break; |
| case BYT_RT5651_IN1_IN2_MAP: |
| custom_map = byt_rt5651_intmic_in1_in2_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); |
| break; |
| default: |
| custom_map = byt_rt5651_intmic_dmic_map; |
| num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); |
| } |
| ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); |
| if (ret) |
| return ret; |
| |
| if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5651_ssp2_aif2_map, |
| ARRAY_SIZE(byt_rt5651_ssp2_aif2_map)); |
| } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5651_ssp0_aif1_map, |
| ARRAY_SIZE(byt_rt5651_ssp0_aif1_map)); |
| } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5651_ssp0_aif2_map, |
| ARRAY_SIZE(byt_rt5651_ssp0_aif2_map)); |
| } else { |
| ret = snd_soc_dapm_add_routes(&card->dapm, |
| byt_rt5651_ssp2_aif1_map, |
| ARRAY_SIZE(byt_rt5651_ssp2_aif1_map)); |
| } |
| if (ret) |
| return ret; |
| |
| ret = snd_soc_add_card_controls(card, byt_rt5651_controls, |
| ARRAY_SIZE(byt_rt5651_controls)); |
| if (ret) { |
| dev_err(card->dev, "unable to add card controls\n"); |
| return ret; |
| } |
| |
| /* |
| * The firmware might enable the clock at boot (this information |
| * may or may not be reflected in the enable clock register). |
| * To change the rate we must disable the clock first to cover |
| * these cases. Due to common clock framework restrictions that |
| * do not allow to disable a clock that has not been enabled, |
| * we need to enable the clock first. |
| */ |
| ret = clk_prepare_enable(priv->mclk); |
| if (!ret) |
| clk_disable_unprepare(priv->mclk); |
| |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) |
| ret = clk_set_rate(priv->mclk, 25000000); |
| else |
| ret = clk_set_rate(priv->mclk, 19200000); |
| |
| if (ret) |
| dev_err(card->dev, "unable to set MCLK rate\n"); |
| |
| report = 0; |
| if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) |
| report = SND_JACK_HEADSET | SND_JACK_BTN_0; |
| else if (priv->hp_detect) |
| report = SND_JACK_HEADSET; |
| |
| if (report) { |
| ret = snd_soc_card_jack_new(runtime->card, "Headset", |
| report, &priv->jack, bytcr_jack_pins, |
| ARRAY_SIZE(bytcr_jack_pins)); |
| if (ret) { |
| dev_err(runtime->dev, "jack creation failed %d\n", ret); |
| return ret; |
| } |
| |
| if (report & SND_JACK_BTN_0) |
| snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, |
| KEY_PLAYPAUSE); |
| |
| ret = snd_soc_component_set_jack(codec, &priv->jack, |
| priv->hp_detect); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| int ret, bits; |
| |
| /* The DSP will covert the FE rate to 48k, stereo */ |
| rate->min = rate->max = 48000; |
| channels->min = channels->max = 2; |
| |
| if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || |
| (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) { |
| /* set SSP0 to 16-bit */ |
| params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); |
| bits = 16; |
| } else { |
| /* set SSP2 to 24-bit */ |
| params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); |
| bits = 24; |
| } |
| |
| /* |
| * Default mode for SSP configuration is TDM 4 slot, override config |
| * with explicit setting to I2S 2ch. The word length is set with |
| * dai_set_tdm_slot() since there is no other API exposed |
| */ |
| ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), |
| SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBC_CFC |
| ); |
| |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); |
| return ret; |
| } |
| |
| ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits); |
| if (ret < 0) { |
| dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const unsigned int rates_48000[] = { |
| 48000, |
| }; |
| |
| static const struct snd_pcm_hw_constraint_list constraints_48000 = { |
| .count = ARRAY_SIZE(rates_48000), |
| .list = rates_48000, |
| }; |
| |
| static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream) |
| { |
| return snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &constraints_48000); |
| } |
| |
| static const struct snd_soc_ops byt_rt5651_aif1_ops = { |
| .startup = byt_rt5651_aif1_startup, |
| }; |
| |
| static const struct snd_soc_ops byt_rt5651_be_ssp2_ops = { |
| .hw_params = byt_rt5651_aif1_hw_params, |
| }; |
| |
| SND_SOC_DAILINK_DEF(dummy, |
| DAILINK_COMP_ARRAY(COMP_DUMMY())); |
| |
| SND_SOC_DAILINK_DEF(media, |
| DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); |
| |
| SND_SOC_DAILINK_DEF(deepbuffer, |
| DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); |
| |
| SND_SOC_DAILINK_DEF(ssp2_port, |
| DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); |
| SND_SOC_DAILINK_DEF(ssp2_codec, |
| DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5651:00", "rt5651-aif1"))); |
| |
| SND_SOC_DAILINK_DEF(platform, |
| DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); |
| |
| static struct snd_soc_dai_link byt_rt5651_dais[] = { |
| [MERR_DPCM_AUDIO] = { |
| .name = "Audio Port", |
| .stream_name = "Audio", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .ops = &byt_rt5651_aif1_ops, |
| SND_SOC_DAILINK_REG(media, dummy, platform), |
| }, |
| [MERR_DPCM_DEEP_BUFFER] = { |
| .name = "Deep-Buffer Audio Port", |
| .stream_name = "Deep-Buffer Audio", |
| .nonatomic = true, |
| .dynamic = 1, |
| .dpcm_playback = 1, |
| .ops = &byt_rt5651_aif1_ops, |
| SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), |
| }, |
| /* CODEC<->CODEC link */ |
| /* back ends */ |
| { |
| .name = "SSP2-Codec", |
| .id = 0, |
| .no_pcm = 1, |
| .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
| | SND_SOC_DAIFMT_CBC_CFC, |
| .be_hw_params_fixup = byt_rt5651_codec_fixup, |
| .dpcm_playback = 1, |
| .dpcm_capture = 1, |
| .init = byt_rt5651_init, |
| .ops = &byt_rt5651_be_ssp2_ops, |
| SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), |
| }, |
| }; |
| |
| /* SoC card */ |
| static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; |
| #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) |
| static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */ |
| #endif |
| static char byt_rt5651_components[50]; /* = "cfg-spk:* cfg-mic:*" */ |
| |
| static int byt_rt5651_suspend(struct snd_soc_card *card) |
| { |
| struct snd_soc_component *component; |
| |
| if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) |
| return 0; |
| |
| for_each_card_components(card, component) { |
| if (!strcmp(component->name, byt_rt5651_codec_name)) { |
| dev_dbg(component->dev, "disabling jack detect before suspend\n"); |
| snd_soc_component_set_jack(component, NULL, NULL); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int byt_rt5651_resume(struct snd_soc_card *card) |
| { |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| struct snd_soc_component *component; |
| |
| if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) |
| return 0; |
| |
| for_each_card_components(card, component) { |
| if (!strcmp(component->name, byt_rt5651_codec_name)) { |
| dev_dbg(component->dev, "re-enabling jack detect after resume\n"); |
| snd_soc_component_set_jack(component, &priv->jack, |
| priv->hp_detect); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* use space before codec name to simplify card ID, and simplify driver name */ |
| #define SOF_CARD_NAME "bytcht rt5651" /* card name will be 'sof-bytcht rt5651' */ |
| #define SOF_DRIVER_NAME "SOF" |
| |
| #define CARD_NAME "bytcr-rt5651" |
| #define DRIVER_NAME NULL /* card name will be used for driver name */ |
| |
| static struct snd_soc_card byt_rt5651_card = { |
| .name = CARD_NAME, |
| .driver_name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .dai_link = byt_rt5651_dais, |
| .num_links = ARRAY_SIZE(byt_rt5651_dais), |
| .dapm_widgets = byt_rt5651_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets), |
| .dapm_routes = byt_rt5651_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), |
| .fully_routed = true, |
| .suspend_pre = byt_rt5651_suspend, |
| .resume_post = byt_rt5651_resume, |
| }; |
| |
| static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; |
| |
| static const struct acpi_gpio_mapping cht_rt5651_gpios[] = { |
| /* |
| * Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, |
| * other boards may have I2cSerialBusV2, GpioInt, GpioIo instead. |
| * We want the GpioIo one for the ext-amp-enable-gpio. |
| */ |
| { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO }, |
| { }, |
| }; |
| |
| struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ |
| u64 aif_value; /* 1: AIF1, 2: AIF2 */ |
| u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ |
| }; |
| |
| static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| static const char * const mic_name[] = { "dmic", "in1", "in2", "in12" }; |
| struct snd_soc_acpi_mach *mach = dev_get_platdata(dev); |
| struct byt_rt5651_private *priv; |
| const char *platform_name; |
| struct acpi_device *adev; |
| struct device *codec_dev; |
| bool sof_parent; |
| bool is_bytcr = false; |
| int ret_val = 0; |
| int dai_index = 0; |
| int i; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| /* register the soc card */ |
| byt_rt5651_card.dev = dev; |
| snd_soc_card_set_drvdata(&byt_rt5651_card, priv); |
| |
| /* fix index of codec dai */ |
| for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { |
| if (!strcmp(byt_rt5651_dais[i].codecs->name, |
| "i2c-10EC5651:00")) { |
| dai_index = i; |
| break; |
| } |
| } |
| |
| /* fixup codec name based on HID */ |
| adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); |
| if (adev) { |
| snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), |
| "i2c-%s", acpi_dev_name(adev)); |
| put_device(&adev->dev); |
| byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name; |
| } else { |
| dev_err(dev, "Error cannot find '%s' dev\n", mach->id); |
| return -ENXIO; |
| } |
| |
| codec_dev = acpi_get_first_physical_node(adev); |
| if (!codec_dev) |
| return -EPROBE_DEFER; |
| priv->codec_dev = get_device(codec_dev); |
| |
| /* |
| * swap SSP0 if bytcr is detected |
| * (will be overridden if DMI quirk is detected) |
| */ |
| if (soc_intel_is_byt()) { |
| if (mach->mach_params.acpi_ipc_irq_index == 0) |
| is_bytcr = true; |
| } |
| |
| if (is_bytcr) { |
| /* |
| * Baytrail CR platforms may have CHAN package in BIOS, try |
| * to find relevant routing quirk based as done on Windows |
| * platforms. We have to read the information directly from the |
| * BIOS, at this stage the card is not created and the links |
| * with the codec driver/pdata are non-existent |
| */ |
| |
| struct acpi_chan_package chan_package; |
| |
| /* format specified: 2 64-bit integers */ |
| struct acpi_buffer format = {sizeof("NN"), "NN"}; |
| struct acpi_buffer state = {0, NULL}; |
| struct snd_soc_acpi_package_context pkg_ctx; |
| bool pkg_found = false; |
| |
| state.length = sizeof(chan_package); |
| state.pointer = &chan_package; |
| |
| pkg_ctx.name = "CHAN"; |
| pkg_ctx.length = 2; |
| pkg_ctx.format = &format; |
| pkg_ctx.state = &state; |
| pkg_ctx.data_valid = false; |
| |
| pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, |
| &pkg_ctx); |
| if (pkg_found) { |
| if (chan_package.aif_value == 1) { |
| dev_info(dev, "BIOS Routing: AIF1 connected\n"); |
| byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1; |
| } else if (chan_package.aif_value == 2) { |
| dev_info(dev, "BIOS Routing: AIF2 connected\n"); |
| byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; |
| } else { |
| dev_info(dev, "BIOS Routing isn't valid, ignored\n"); |
| pkg_found = false; |
| } |
| } |
| |
| if (!pkg_found) { |
| /* no BIOS indications, assume SSP0-AIF2 connection */ |
| byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; |
| } |
| } |
| |
| /* check quirks before creating card */ |
| dmi_check_system(byt_rt5651_quirk_table); |
| |
| if (quirk_override != -1) { |
| dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n", |
| byt_rt5651_quirk, quirk_override); |
| byt_rt5651_quirk = quirk_override; |
| } |
| |
| /* Must be called before register_card, also see declaration comment. */ |
| ret_val = byt_rt5651_add_codec_device_props(codec_dev, priv); |
| if (ret_val) |
| goto err_device; |
| |
| /* Cherry Trail devices use an external amplifier enable gpio */ |
| if (soc_intel_is_cht() && !byt_rt5651_gpios) |
| byt_rt5651_gpios = cht_rt5651_gpios; |
| |
| if (byt_rt5651_gpios) { |
| devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); |
| priv->ext_amp_gpio = devm_fwnode_gpiod_get(dev, codec_dev->fwnode, |
| "ext-amp-enable", |
| GPIOD_OUT_LOW, |
| "speaker-amp"); |
| if (IS_ERR(priv->ext_amp_gpio)) { |
| ret_val = PTR_ERR(priv->ext_amp_gpio); |
| switch (ret_val) { |
| case -ENOENT: |
| priv->ext_amp_gpio = NULL; |
| break; |
| default: |
| dev_err(dev, "Failed to get ext-amp-enable GPIO: %d\n", ret_val); |
| fallthrough; |
| case -EPROBE_DEFER: |
| goto err; |
| } |
| } |
| priv->hp_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode, |
| "hp-detect", |
| GPIOD_IN, |
| "hp-detect"); |
| if (IS_ERR(priv->hp_detect)) { |
| ret_val = PTR_ERR(priv->hp_detect); |
| switch (ret_val) { |
| case -ENOENT: |
| priv->hp_detect = NULL; |
| break; |
| default: |
| dev_err(dev, "Failed to get hp-detect GPIO: %d\n", ret_val); |
| fallthrough; |
| case -EPROBE_DEFER: |
| goto err; |
| } |
| } |
| } |
| |
| log_quirks(dev); |
| |
| if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) || |
| (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) |
| byt_rt5651_dais[dai_index].codecs->dai_name = "rt5651-aif2"; |
| |
| if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) || |
| (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) |
| byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port"; |
| |
| if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { |
| priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3"); |
| if (IS_ERR(priv->mclk)) { |
| ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk), |
| "Failed to get MCLK from pmc_plt_clk_3\n"); |
| goto err; |
| } |
| /* |
| * Fall back to bit clock usage when clock is not |
| * available likely due to missing dependencies. |
| */ |
| if (!priv->mclk) |
| byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; |
| } |
| |
| snprintf(byt_rt5651_components, sizeof(byt_rt5651_components), |
| "cfg-spk:%s cfg-mic:%s%s", |
| (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? "1" : "2", |
| mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], |
| (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? |
| " cfg-hp:lrswap" : ""); |
| byt_rt5651_card.components = byt_rt5651_components; |
| #if !IS_ENABLED(CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES) |
| snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), |
| "bytcr-rt5651-%s-spk-%s-mic%s", |
| (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? |
| "mono" : "stereo", |
| mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], |
| (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) ? |
| "-hp-swapped" : ""); |
| byt_rt5651_card.long_name = byt_rt5651_long_name; |
| #endif |
| |
| /* override plaform name, if required */ |
| platform_name = mach->mach_params.platform; |
| |
| ret_val = snd_soc_fixup_dai_links_platform_name(&byt_rt5651_card, |
| platform_name); |
| if (ret_val) |
| goto err; |
| |
| sof_parent = snd_soc_acpi_sof_parent(dev); |
| |
| /* set card and driver name */ |
| if (sof_parent) { |
| byt_rt5651_card.name = SOF_CARD_NAME; |
| byt_rt5651_card.driver_name = SOF_DRIVER_NAME; |
| } else { |
| byt_rt5651_card.name = CARD_NAME; |
| byt_rt5651_card.driver_name = DRIVER_NAME; |
| } |
| |
| /* set pm ops */ |
| if (sof_parent) |
| dev->driver->pm = &snd_soc_pm_ops; |
| |
| ret_val = devm_snd_soc_register_card(dev, &byt_rt5651_card); |
| if (ret_val) { |
| dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val); |
| goto err; |
| } |
| platform_set_drvdata(pdev, &byt_rt5651_card); |
| return ret_val; |
| |
| err: |
| device_remove_software_node(priv->codec_dev); |
| err_device: |
| put_device(priv->codec_dev); |
| return ret_val; |
| } |
| |
| static int snd_byt_rt5651_mc_remove(struct platform_device *pdev) |
| { |
| struct snd_soc_card *card = platform_get_drvdata(pdev); |
| struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); |
| |
| device_remove_software_node(priv->codec_dev); |
| put_device(priv->codec_dev); |
| return 0; |
| } |
| |
| static struct platform_driver snd_byt_rt5651_mc_driver = { |
| .driver = { |
| .name = "bytcr_rt5651", |
| }, |
| .probe = snd_byt_rt5651_mc_probe, |
| .remove = snd_byt_rt5651_mc_remove, |
| }; |
| |
| module_platform_driver(snd_byt_rt5651_mc_driver); |
| |
| MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651"); |
| MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:bytcr_rt5651"); |